Suchergebnisse

Wine is perhaps the most ancient and popular alcoholic beverage worldwide. Winemaking practices involve careful vineyard management alongside controlled alcoholic fermentation and potential aging of the wine in barrels. Afterwards, the wine is placed in bottles and stored or distributed in retail. Yet, it is considered that wine achieves its optimum properties after a certain storage time in the bottle. The main outcome of bottle storage is a decrease of astringency and bitterness, improvement of aroma and a lighter and more stable color. This is due to a series of complex chemical changes of its components revolving around the minimized and controlled passage of oxygen into the bottle. For this matter, antioxidants like sulfur oxide are added to avoid excessive oxidation and consequent degradation of the wine. In the same sense, bottles must be closed with appropriate stoppers and stored in adequate, stable conditions, as the wine may develop unappealing color, aromas and flavors otherwise. In this review, features of bottle aging, relevance of stoppers, involved chemical reactions and storage conditions affecting wine quality will be addressed. ; The research leading to these results was funded by FEDER under the program Interreg V-A Spain-Portugal (POPTEC) 2014-2020 ref. 0377_IBERPHENOL_6_E and ref. 0181_NANOEATERS_ 01_E; to Xunta de Galicia supporting with the Axudas Conecta Peme the IN852A 2018/58 NeuroFood Project and the program EXCELENCIA-ED431F 2020/12; to Ibero-American Program on Science and Technology (CYTED—AQUA-CIBUS, P317RT0003) and by the Bio Based Industries Joint Undertaking (JU) under grant agreement No 888003 UP4HEALTH Project (H2020-BBIJTI-2019), the JU receives support from the European Union's Horizon 2020 research and innovation program and the Bio Based Industries Consortium. The research leading to these results was supported by MICINN supporting the Ramón & Cajal grant for M.A. Prieto (RYC-2017-22891); by Xunta de Galicia and University of Vigo supporting the post-doctoral grant of M. Fraga-Corral (ED481B-2019/096). ; info:eu-repo/semantics/publishedVersion

[EN] The aim of this experimental work was to study the porous structure of Ultra-High-Performance Fibre-Reinforced Concretes (UH) made with different fibre volume contents (0%, 1%, 2%) under several curing conditions (laboratory environment, 20 degrees C, 60 degrees C, 90 degrees C), comparing the results with those recorded for ordinary, high strength and very high strength concretes. Scanning electron microscopy, mercury intrusion porosimetry, thermogravimetry, water absorption and oxygen permeability tests were carried out. The results showed a low portlandite content in UH (in the order of 75% lower than in concrete C50) and a low degree of hydration, but they rise with curing temperature. These concretes have a very fine porous structure, with a high concentration of pores on the nanoscale level, below 0.05 mu m. Their porosity accessible to water is consequently around 7-fold lower than in conventional (C30), 6-fold lower than in high-strength (C50) and 4-fold lower than in very high-strength (C90) concretes. Their oxygen permeability is at least one order of magnitude lower than in C90, two orders of magnitude lower than in C50 and three orders of magnitude lower than in C30. The percentage of added steel fibre does not affect the UH porous structure ; This research was funded by Ministerio de Economia Y Competitividad (Agencia Estatal de Investigacion) of the Spanish Government, Grant number BIA2016-78460-C3-3-R ; Valcuende Payá, MO.; Lliso-Ferrando, JR.; Roig-Flores, M.; Gandía-Romero, JM. (2021). Porous Structure of Ultra-High-Performance Fibre-Reinforced Concretes. Materials. 14(7):1-18. https://doi.org/10.3390/ma14071637 ; S ; 1 ; 18 ; 14 ; 7

In the field of modern hydrogen energy, obtaining pure hydrogen and syngas and then being able to use them for green energy production are significant problems. Developing solid oxide fuel cells (SOFC) and catalytic membranes for oxygen separation as well as materials for these devices is one of the most likely ways to solve these problems. In this work, the authors' recent studies in this field are reviewed; the fundamentals of developing materials for SOFC cathodes and oxygen separation membranes' permselective layers based on research of their oxygen mobility and surface reactivity are presented. Ruddlesden – Popper phases Ln2–xCaxNiO4+δ (LnCNO) and perovskite-fluorite nanocomposites PrNi0.5Co0.5O3–δ–Ce0.9Y0.1O2–δ (PNC–YDC) were studied by isotope exchange of oxygen with C18O2 and 18O2 in flow and closed reactors. For LnCNO a high oxygen mobility was shown (D* ~ 10–7 cm2/s at 700 °C), being provided by the cooperative mechanism of oxygen migration involving both regular and highly-mobile interstitial oxygen. For PNC–YDC dominated a wide fast diffusion channel via fluorite phase and interphases due to features of the redistribution of cations resulting in superior oxygen mobility (D* ~ 10–8 cm2/s at 700 °C). After optimization of composition and nanodomain structure of these materials, as cathodes of SOFC they provided a high power density, while for asymmetric supported oxygen separation membranes – a high oxygen permeability. © 2020 ; Support of different parts of the work by the Russian Science Foundation (Project 16-13-00112) and the budget project №AAAA-A17-117041110045-9 for Boreskov Institute of Catalysis is gratefully acknowledged. The authors from the Ural Federal University are grateful to the Government of the Russian Federation (Agreement 02.A03.21.0006, Act 211). Ce 0.9 Y 0.1 O 2–δ |Ce 0.9 Gd 0.1 O 2–δ |Ni/Zr 0.84 Y 0.16 O 2–δ anodic half-cells and Ni/Al foam substrates were kindly provided by H.C. Starck, Germany and Powder Metallurgy Institute NAN Belarus, respectively. Authors would like to appreciate International Conference on Advances in Energy Systems and Environmental Engineering (ASEE19, Wroclaw, Poland, June 9-12, 2019) Organization Committee.

[EN] Reinforced concrete elements frequently suffer small cracks that are not relevant from the mechanical point of view, but they can be an entrance point for aggressive agents, such as oxygen, which could initiate the degradation processes. Fiber-Reinforced Concrete and especially Ultra High Performance Concrete increase the multi-cracking behavior, reducing the crack width and spacing. In this work, the oxygen availability of three types of concrete was compared at similar strain levels to evaluate the benefit of multi-cracking in the transport of oxygen. The types of concrete studied include traditional, High-Performance, and Ultra-High-Performance Fiber-Reinforced Concrete with and without nanofibers. To this purpose, reinforced concrete beams sized 150 x 100 x 750 mm(3) were prepared with embedded stainless steel sensors that were located at three heights, which have also been validated through this work. These beams were pre-cracked in bending up to fixed strain levels. The results indicate that the sensors used were able to detect oxygen availability due to the presence of cracks and the detected differences between the studied concretes. Ultra High Performance Concrete in the cracked state displayed lower oxygen availability than the uncracked High Performance Concrete, demonstrating its potential higher durability, even when working in cracked state, thanks to the increased multi-cracking response. ; The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martinez Ibernon (FPU 16/00723), to the Universitat Politecnica de Valencia for the pre-doctoral scholarship granted to Josep Ramon Lliso Ferrando (FPI-UPV-2018), and the European Union's Horizon 2020 ReSHEALience project (Grant Agreement No. 760824). ; Martínez-Ibernón, A.; Roig-Flores, M.; Lliso-Ferrando, JR.; Mezquida-Alcaraz, EJ.; Valcuende Payá, MO.; Serna Ros, P. (2020). Influence of cracking on oxygen transport in UHPFRC using stainless steel sensors. ...

This study was designed to evaluate the effects of cellulose membranes produced by Acetobacter xylinum bacteria, after enrichment of the growth media with Alzahdy palm dates syrup to enhance cellulose production for reducing the contamination of locally-produced white cheese with pathogenic bacteria. Cellulose was vitally activated by incubation with both probiotics Lactobacillus acidophilus and Lactobacillus plantarum and the effectiveness of the produced cellulose membranes was measured by studying six characteristics: elongation, tensile strength, membrane rupture, permeability to oxygen, permeability to water vapor, and thickness (mm). The produced membranes showed remarkable functionality and characteristics for all studied tests. The results indicate that the cellulose membranes showed high antibacterial activity after incubation with Lactobacillus acidophilus and Lactobacillus plantarum for 24 and 48 hours against five different pathogenic bacteria, namely E. coli, S. aureus, Pseudomonas sp., B. cereus and S. typhymurim. Moreover, a positive result was obtained by reducing the number of these pathogenic bacteria after treating the white cheese with the produced cellulose membranes.

[EN] In transport applications, reciprocating internal combustion engines still have important advantages in terms of endurance and refueling time and available infrastructure when compared against fuel cell or battery-based powertrains. Although conventional internal combustion engine configurations produce important amounts of greenhouse gases and pollutant emissions, oxy-fuel combustion can be used to mitigate to a great extent such emissions, mainly producing NOx-free, CO2 and H2O exhaust gases. However, the oxygen needed for the combustion, which is mixed with flue gases before entering the cylinder, has to be stored in an additional tank, which hinders the adoption of this technology. Fortunately, the latest developments in gas separation membranes are starting to produce extremely-high selectivity and high permeability oxygen-separation membranes. Using the waste heat of the exhaust gases to heat up a mixed ionic-electronic conducting membrane, and feeding it with pressurized air, it is possible to produce all the oxygen needed by the combustion process while keeping the whole system compact. This work presents a design of an oxy-fuel combustion engine with in-situ oxygen production. The numerical simulations show also that this concept keeps a competitive brake specific fuel consumption, while the high concentration of CO2 in the exhaust gases facilitates the introduction of carbon sequestration technologies, leading to potentially carbon-neutral internal combustion engines. ; The authors want to acknowledge the institution "Conselleria d'Educacio, Investigació, Cultura i Esport de la Generalitat Valenciana" and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral" for doctoral studies (ACIF/2020/246) funded by The European Union. This research was partially supported by the institution "Agencia Valenciana de la Innovacion (AVI)" and its grant program "Valorizacion y transferencia de resultados de investigación a las empresas. Línea 1. Valorizacion, ...

PUBLISHED ; In this work we have used melt-processing to mix liquid-exfoliated boron?nitride nanosheets with PET to produce composites for gas barrier applications. Sonication of h-BN powder, followed by centrifugation-based size-selection, was used to prepare suspensions of nanosheets with aspect ratio >1000. The solvent was removed to give a weakly aggregated powder which could easily be mixed into PET, giving a composite containing well-dispersed nanosheets. These composites showed very good barrier performance with oxygen permeability reductions of 42% by adding just 0.017 vol% nanosheets. At low loading levels the composites were almost completely transparent. At higher loading levels, while some haze was introduced, the permeability fell by [similar]70% on addition of 3 vol% nanosheets. ; We thank SAB Miller for funding this research project. We also acknowledge funding from the European Union Seventh Framework Programme under grant agreement no 604391 Graphene Flagship. We have also received support from the Science Foundation Ireland (SFI) funded centre AMBER (SFI/ 12/RC/2278). In addition, JNC acknowledges the European Research Council (SEMANTICS). We also thank the Advanced Microscopy Lab for help with microscopic analysis

Poor oxygenation of solid tumours has been linked with resistance to chemo- and radio-therapy and poor patient outcomes, hence non-invasive imaging of oxygen supply and demand in tumours could improve disease staging and therapeutic monitoring. Optoacoustic tomography (OT) is an emerging clinical imaging modality that provides static images of endogenous haemoglobin concentration and oxygenation. Here, we demonstrate oxygen enhanced (OE)-OT, exploiting an oxygen gas challenge to visualise the spatiotemporal heterogeneity of tumour vascular function. We show that tracking oxygenation dynamics using OE-OT reveals significant differences between two prostate cancer models in nude mice with markedly different vascular function (PC3 & LNCaP), which appear identical in static OT. LNCaP tumours showed a spatially heterogeneous response within and between tumours, with a substantial but slow response to the gas challenge, aligned with ex vivo analysis, which revealed a generally perfused and viable tumour with marked areas of haemorrhage. PC3 tumours had a lower fraction of responding pixels compared to LNCaP with a high disparity between rim and core response. While the PC3 core showed little or no dynamic response, the rim showed a rapid change, consistent with our ex vivo findings of hypoxic and necrotic core tissue surrounded by a rim of mature and perfused vasculature. OE-OT metrics are shown to be highly repeatable and correlate directly on a per-tumour basis to tumour vessel function assessed ex vivo. OE-OT provides a non-invasive approach to reveal the complex dynamics of tumour vessel perfusion, permeability and vasoactivity in real time. Our findings indicate that OE-OT holds potential for application in prostate cancer patients, to improve delineation of aggressive and indolent disease as well as in patient stratification for chemo- and radio-therapy. ; We would also like to thank the CRUK Cambridge Institute Core Facilities for their support, including the BRU, Histopathology, Light Microscopy, Biorepository, and Preclinical Imaging. We are grateful for advice from Dr Simon Richardson (Institute of Cancer Research, Sutton, UK) on optimal use of the Oxylite pO2 probe. This work was supported by the EPSRC-CRUK Cancer Imaging Centre in Cambridge and Manchester (C197/A16465), Cancer Research UK (C14303/A17197, C47594/A16267) and the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° FP7-PEOPLE-2013-CIG-630729.

16 figures, 6 tables.-- Supplementary material available. ; Ceria-iron oxide mesoporous materials with Fe:Ce molar ratio of 5:5 and 9:1 were synthesized by hydrothermal method using CTAB as a template and subsequently modified with NiO (molar ratio Ni:Fe = 1:2) by incipient wetness impregnation technique. In order to increase the electro-capacitive properties and reduce the intrinsic impedance of the metal oxides, the samples were consecutively modified by reduction in hydrogen to obtain highly dispersed Ni–Fe alloys into ceria matrix. By exploiting the high permeability of carbon inside ferrous alloys, the metal phase has been further modified into ferrous carbides and metal alloys encapsulated within carbon nanofibers. For this purpose, a reaction, already widely studied for the production of hydrogen, was used, that is the decomposition of methanol vapors. In fact, this decomposition, in addition to producing syn-gas and methane, changes the catalysts in use through a chemical vapor deposition-carbon coating process. This fact, has been used by us to demonstrate how the newly obtained metal-carbon nanocomposites can be used for electro-catalytic purposes. The modified phases of the two molar ratios of the Fe–Ni–Ce catalysts were tested in the Oxygen Evolution Reaction (OER) in an alkaline environment (1 M KOH), showing a satisfactory and progressive increase in activity and a surprising decrease in the overpotential at 10 mA/cm2 of current density. The morphological, textural and physicochemical properties of the samples were characterized in details by XRD, N2-physisorption, TG-TPO, TEM, EDX, FTIR, XPS, Raman and Moessbauer spectroscopies. ; This research was funded by the BIKE project, which received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 813748. ; Peer reviewed

Cellulose nanocrystals (CNC) were mixed with either cellulose nanofibril (CNF) or carboxymethylcellulose (CMC) in variable proportions (0/100, 20/80, 40/60, 50/50, 60/40, 80/20 and 100/0) to obtain cast films with acceptable barrier and mechanical properties as replacements for food packaging plastics. Both CNF and CMC improved tensile strength, elongation, UV opacity, air resistance, hydrophobicity (WCA-water contact angle), water vapor transmission rate (WVTR) and oxygen impermeability in pure CNC. WVTR and oxygen permeability were strongly dependent on relative humidity (RH). Interestingly, the greatest effect on WVTR was observed at RH¿=¿90% in films containing CMC in proportions above 60%. CMC- and CNF-containing films had oxygen impermeability up to an RH level of 80% and 60%, respectively. The previous effects were confirmed by food packaging simulation tests, where CMC-containing films proved the best performers. The composite films studied were biodegradable—which constitutes a major environmental related advantage—to an extent proportional to their content in CMC or CNF ; This publication is part of the PID2020-114070RB-I00 (CELLECO- PROD) project, funded by MCIN/AEI/10.13039/501100011033. The authors would also like to thank the consolidated research group AGAUR 2017 SGR 30 with Universitat de Barcelona (UB) and to the Serra Húnter Fellowship awarded to O. Cusola. With the support from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia and the European Social Fund ; Postprint (published version)

Funding Information: This document is part of a project that has received funding from the Bio Based Industries Joint Undertaking (JU) under the European Union?s Horizon 2020 research and innovation programme under grant agreement No. 837866. The JU receives support from the European Union?s Horizon 2020 research and innovation programme and the Bio Based Industries Consortium. Publisher Copyright: Copyright © 2021 Asikanius, Jääskeläinen, Koivula, Oinonen and Österberg. ; Valorization of side streams offers novel types of raw materials to complement or replace synthetic and food-based alternatives in materials science, increasing profitability and decreasing the environmental impacts of biorefineries. Lignocellulose biomass contains lignin and carbohydrates that are covalently linked into lignin-carbohydrate complexes (LCCs). In biomass fractionation processes, these complexes are conventionally considered as waste, which hinders the biomass fractionation process, and they may solubilize into aqueous effluents. This study presents how LCCs, derived from pulp mill effluent, can be turned into valuable biopolymers for industrial polymer film applications. Free-standing composite films containing hydroxyethyl cellulose (HEC) and LCCs with varying molar mass, charge density and lignin/hemicellulose ratio were prepared to study the effect of LCC amount on mechanical properties and oxygen permeability. Increasing the LCC content increased the yield point and Young's modulus of the films. Breaking strain measurements revealed a non-linear correlation with the LCC concentration for the samples with higher lignin than hemicellulose content. The addition of LCC enhanced oxygen barrier properties of HEC films significantly even at high relative humidity. The present research demonstrates how a currently underutilized fraction of the biorefinery side stream has the potential to be valorized as a biopolymer in industrial applications, for example as a barrier film for paper and board packaging. ; Peer reviewed

43 Páginas: 10 Tablas; 7 Figuras ; BACKGROUND There is an increasing interest in the use of pasteurizable plastic packaging by the olive industry. In order to investigate the change from traditional glass or varnished can containers to plastic packaging, the proper plastic material that is compatible with fermented olives while maintaining color quality during pasteurization treatment and storage must be selected. This work is focused on color stability in two distinct pasteurizable plastic containers with different oxygen permeability. RESULTS In PET + MDPE/EVOH (polyethylene terephthalate + medium-density polyethylene/ethylene vinyl alcohol) pouches, pasteurization provoked severe browning which drastically decreased their color shelf life ( 6.5 months). CONCLUSION The plastic material had a significant effect on the retention of color of the pasteurized product. The use of AlOx-coated PET + MDPE pouches could be an alternative to traditional packaging for the pasteurization and storage of Spanish-style green olives from a color quality standpoint. © 2017 Society of Chemical Industry ; The authors wish to thank the Andaltec R&D + I Foundation for providing financial support for carrying out this work. Also, part of the research work was supported by the Ministry of Economy and Competitiveness of the Spanish Government through Project AGL2014-54048-R, partially financed by the European Regional Development Fund (ERDF). ; Peer reviewed