Suchergebnisse

A special regulatory regime applies to products of recombinant nucleic acid modifications. A ruling from the European Court of Justice has interpreted this regulatory regime in a way that it also applies to emerging mutagenesis techniques. Elsewhere regulatory progress is also ongoing. In 2015, Argentina launched a regulatory framework, followed by Chile in 2017 and recently Brazil and Colombia. In March 2018, the USDA announced that it will not regulate genome-edited plants differently if they could have also been developed through traditional breeding. Canada has an altogether different approach with their Plants with Novel Traits regulations. Australia is currently reviewing its Gene Technology Act. This article illustrates the deviation of the European Union's (EU's) approach from the one of most of the other countries studied here. Whereas the EU does not implement a case-by-case approach, this approach is taken by several other jurisdictions. Also, the EU court ruling adheres to a process-based approach while most other countries have a stronger emphasis on the regulation of the resulting product. It is concluded that, unless a functioning identity preservation system for products of directed mutagenesis can be established, the deviation results in a risk of asynchronous approvals and disruptions in international trade.

The article is a study of politicians' views on literature based on motions and debates in the Swedish parliament 2000 -- 2010. The aim is to investigate the political agenda for literature and the functions ascribed to literature, reading and books during the period. The first part examines the uses of the concepts literature, reading, and books and these notions are traced into ideology as well as theoretical traditions within literary studies. The ways these concepts are used has political consequences for regulations and support of literature and book trade as a whole. Literature is throughout the period and by most speakers credited with a particular value and becomes a symbol of a better and more democratic world. This utopian vision of literature is significant as it is transformed into real-life politics and regulations. Adapted from the source document.

The purpose of this thesis is to, from an institutional approach, study how the Stockholm importers within the textile sector adapted their foreign trade to the change in economic policy 1720 through 1738. The focus is to investigate to what extent the introduction of new laws, regulations etc. can be an explanation for what happened to Stockholm's foreign trade, mainly imports, particularly textile imports during the period. It is mainly the economic policies that had been enacted during the Hornian government and their effects that have been studied. This is a period that has seldom been studied in other research. This thesis begins when the Russian raids were over. This was a year when the foreign trade still was relatively free and was untouched by the 17th century's regulations. After 1721 the policies that would be introduced to increase Sweden's level of self-sufficiency and strengthen ties with the North Sea area had several components. Besides the economic policy, the main sources for the thesis are the city toll records. The trade policies in the shape of tolls and fees, import and consumption bans etc. and the commercial policies together became different kinds of political tools used for several purposes. The conclusion of this thesis is that the economic policies made the Stockholm importers adapt their trade to the change. The import bans and sumptuary laws had an effect. The economic policies gave rise to an increase in the import of textile raw materials. The rise in toll costs and import fees contributed to displacing the foreign trade towards other areas. The change in the economic policies was successful in the sense that it gave rise to new conditions for domestic production within the textile sector and forced Stockholm's importers to adapt their foreign trade.

This licentiate thesis investigates the decision-making process behind the regulation of winter shipping along the coast of the northern part of Sweden, the Norrland region, in the period 1940-1975. The licentiate thesis examines two aspects of this decision-making process. First, how the regulations in the field of winter shipping were designed in the period. Second, this work examines the underlying factors behind this regulatory outcome on the premise that the regulatory design in the field was the result of an interaction between the regulating actors in the government and their political and economic institutional context. As for the first issue, it is demonstrated that the period 1940-1975 was characterised by a regulatory ambition to expand winter shipping along the coast of Norrland. This meant that the government made substantial investments in ice-breakers during the period, which gradually expanded the shipping season until the target of year-round shipping even to the northernmost ports was established in the first part of the 1970s. Accordingly, those dues for ice-breaker services proposed by several committees that investigated the issue were never introduced. Instead, government-led ice-breaking has served to compensate Norrland as a peripheral region for its relatively high transport costs. Regarding the second issue, it is showed that the decision-making process was influenced by developments at different policy levels of the government hierarchy. In the period 1940-1964, when a public authority within the maritime sector emerged and was consolidated, developments at the maritime sector level affected the decision-making process to a large extent. In turn, the period after 1964 witnessed a change in government policy towards the Norrland region as a more interventionist regional and industrial policy than earlier was implemented. This meant that the decision-making process to a larger extent was influenced by factors originating from a macro policy level. During the decision-making process, actors at both the maritime sector level and the macro level emphasized the importance of government-regulated winter shipping for the regional industrialization of the Norrland region in terms that reflected the aims and interests of their policy levels. In this respect, actors in the maritime sector pointed to the role of winter shipping as a trade policy instrument while actors who represented the interests of regional development policy and industrial policy considered the expansion of winter shipping as crucial in achieving the general ambition to create a geographically egalitarian welfare state, characterised by high levels of growth and low unemployment.

In this report future annual emissions amounts of gaseous pollutants, particulate matter (PM10) and noise from the non-road mobile machinery sector in Sweden were estimated. The estimates over future emissions amounts were conducted for each year from 2006 to 2020. Special focus has been taken to the impact of European and national legislations, the age distribution of different types and sizes of machinery and measures to reduce the annual emissions. Besides different measures to reduce emissions, corresponding costs were also estimated. The study comprises fuel consumption and emissions of CO2, carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx), particulate matter (PM), and noise from non-road mobile machinery equipped with diesel engines with a rated engine power of 37 to 560 kW. Non-road mobile machinery for example includes tractors, wheel loaders, excavators, articulate haulers, mobile cranes, combined harvesters, forestry machinery and trucks. The current report was a supplementary study to a report describing a methodology for estimating annual fuel consumption and emissions from the non-road mobile machinery sector in Sweden for year 2006. Inventory data of the year 2006 study was obtained from the Swedish machinery testing institute's machinery inspection operation, statistics of sale returns from trade organisations and the Swedish motor-vehicle register. The number of machinery and annual fuel consumption and emissions amounts for year 2006 is presented in table S1. Besides estimates of annual fuel consumption and emissions amounts, emissions of noise was also derived both at a national level and for a specific construction site. For the case study the results showed that it was possible to reduce the average noise level with more than 3 dB(A) compared with the base scenario just by choosing the machinery fulfilling the strictest noise limits, i.e. Stage II which was mandatory for most machinery from 2006. Other measures simulated included various types of retrofit of noise reduction packages. The specific cost for the different measures to reduce average noise emissions from the specific construction site varied from 4 000 up to more than 500 000 SEK dB-1. For the estimate of future fuel consumption and emissions amounts various simulations were conducted, each with a different measure for reducing the annual amounts. Five main emission reduction measures or programs were studied: - Scrappage program - Alternative fuel program - Voluntary emission regulation program - Retrofit of aftertreatment program - Noise reduction program The impact on engine exhaust gas emissions and noise of the current European emission and noise regulations, Stage I to IV and Stage I to II for emissions and noise respectively were common for all simulations or programs. Besides the impact of European regulations, annual work was set to a fixed value for each type of machinery and year simulated, thus eliminating any potential changes of the state of the market. The result of the baseline scenario "Business as usual" (BAU), i.e. only taking account to the impact of European regulation, is presented in table S2 for four different years Both fuel consumption and emissions of CO2 remains fairly constant as an effect of the assumption that the annual work was set at a fixed value. However, emissions of especially NOx and PM showed a major reduction due to the tighter and tighter regulations. All programs simulated were able to reduce the emissions compared with the BAU scenario with exceptions for emissions of nitrogen oxides, which increased in some of the alternative fuel programs. Both the absolute reduction and cost varied significantly between and within the various programs. Reduction of NOx varied from an accumulated increase in emissions of 25 000 tonne to an accumulated reduction of 22 000 tonne for the studied period from 2006 to 2020. At the same time the accumulated cost for the programs varied from a few hundred million SEK to more than 60 000 million SEK. In table S3, specific reduction cost for each pollutant in SEK kg-1 for eight typical emission reduction programs are presented. The results showed that the most economically favourable alternative for reducing emissions from non-road mobile machinery was the voluntary emissions regulation program, i.e. early introduction of machinery fulfilling coming emission limits. Another important result was that the introduction of alternative fuels as a mean of emissions reduction was associated with rather high costs compared to the actual reduction in emissions. For emissions of nitrogen oxides the specific reduction cost varied from almost 100 SEK kg-1 up to a few hundreds of SEK kg-1 except for the alternative fuel programs, which resulted in a considerable higher cost.

When animals are exposed to a novel situation such as transportation, they react by eliciting certain physiological and behavioural functions in order to cope with the situation. These changes can be measured to indicate how much stress the animal is suffering. Physiological stress indicators often measured in animal transport research include changes in heart rate, live-weight, cortisol levels, and blood composition including electrolytes, metabolites and enzymes (Broom and Johnson, 1993). Animal behavioural stress indicators include struggling, vocalisation, kicking or biting, hunching of the back, urination, defecation and recumbence (Broom et al. 1996; Gregory, 1998). Meat quality parameters post mortem can also help to indicate stress levels in animals (Grandin, 1990; Gregory, 1998). These include incidence of bruising and DFD in all farm animal species and PSE in pigs. Mortality is also an obvious indicator of poor welfare. Combined aspects of transport that contribute to causing stress in livestock include loading and unloading procedures, close proximity to stock handlers, water/feed deprivation, noise, riding in a truck, mixing with other animals and being forced into unfamiliar environments. The responses of stock to these conditions will depend on the animal's genetically controlled adaptability, physical condition and its previous handling experiences (Gross and Siegel, 1993). Factors such as the adequate preparation of animals for transport, controlled prior access to feed and water, minimal disruption to social groups, considerate animal handling skills, adequate handling and transport facilities including good ventilation in trucks, and careful driving technique are major areas that dictate the standard of animal transport. For example, considerations for pigs should include a pre-transport fasting period which balances the requirement to avoid hunger, travel sickness and deaths. Breeding and selecting for more stress-resistant genotypes of pigs can improve the welfare by reducing mortality and the metabolic consequences of transport stress. Other factors influencing animal transport include farm size and country size. For example, livestock transport in Scandinavia involves transport vehicles travelling to more than one farm in order to fill a vehicle. In Australia often one farm pick up can fill a truck, and although the distances may be much longer to the abattoir, it will be more direct. The market demand dictates the type of animals transported. For example the veal trade in Europe demands young live calves to be transported over long distances from northern countries which supply it to the southern countries which demand it. This trade exists in live animals rather than meat because the demanding countries further fatten and slaughter these animals specific to their needs. The industry set up influences the standard of animal transport in different countries. For example in countries where industries are vertically integrated consisting of producer-owned slaughter plant co-operatives (Sweden and Denmark), producers are paid according to slaughter weight and lean meat percentage, therefore there is more consistent quality control measures in place. In Australia the marketing system is such that it provides no economic incentive to reduce losses. Greater public awareness of animal welfare seems to be increasing in western countries, and as a result there is more pressure on the livestock industry to adopt better standards for the farming, handling, transport and slaughter of animals. The transport of livestock in Australia continues to be under increased scrutiny from overseas markets and animal welfare groups. In the European Union (EU), public pressure has been a successful instigator to the drafting and continued improvement of comprehensive legislation for animal transport. EU animal transport laws cover aspects such as minimum design standards for livestock vehicles (including ventilation controls), maximum journey lengths before resting intervals, stocking rates, what animals are considered as fit to travel, and general handling and care requirements of animals in transport. These laws are causing debate between northern and southern countries in areas such as maximum journey lengths and vehicle design standards. Some countries such as the UK have also gone to a great effort to adjust national laws in order to incorporate EU transport laws, but countries such as Spain and Italy have not. Typically it is these countries that more often have poor standards of animal welfare, and the welfare of farmed animals has historically been of low priority (Schmidt, 1995). When and how these countries will adopt the comprehensive EU animal transport regulations, continues to be an unanswered and politically sensitive question between EU member states.