Previously, the neutronics design of a small and compact linear breed-and-burn fast reactor (B&BR) was completed. The reactor produces 400 MWth power, and it can operate with excess reactivity of less than 1$ for more than 50 years without refuelling. As the blanket fuel, the spent nuclear fuel (SNF) from existing light water reactors (LWRs) is used to reduce the burden from the problematic long-lived isotopes in SNF. However, by loading massive nuclides at the initial core, the impact of nuclear data uncertainty on the reactivity calculation results of SNF-fuelled B&BR at the beginning of life (BOL) is expected to be significant because these nuclides have different credentials in evaluated nuclear data libraries. In this study, the impact of nuclear library uncertainty from ENDF/B-VII.0 and ENDF/B-VII.1 on reactivity calculation of B&BR is evaluated using the continuous-energy TSUNAMI-3D module in the SCALE6.2 code package. The uncertainty of reactivity calculation results of B&BR caused by the inaccuracy of two libraries is significant (more than 2000 pcm), mainly from the uncertainty of 235,238U and 56Fe cross section. The energy-dependent sensitivity profiles show that they are significant at the fast energy range. The uncertainty of coolant void reactivity (CVR) is about 18%, and that of fuel temperature coefficient (FTC) is about 15% of the reactivity effect. The top five contributions for CVR accounted for elastic scattering of 238U, capture of 235,238U, and elastic scattering of 23Na and 56Fe. Meanwhile, the top contributors for FTC were accounted for elastic scattering of 238U and 56Fe, capture of 235U, and elastic scattering of 94Zr and 57Fe. It is highly recommended to improve the accuracy of those isotopes' cross sections at the high energy range to provide a more reliable reactivity calculation for the fast system.
Steady-state and transient analysis of reactor core under Reactivity-Initiated Accident (RIA) conditions are important for reactor operation safety. The reactor dynamics are influenced by neutronic and thermal-hydraulic aspects of the core. In this study, steady-state and transient analysis under RIA conditions of the RSG-GAS multipurpose reactor was carried out using MTR-DYN and EUREKA-2/RR programs. Neutronic calculations were performed using a few group cross-sections generated by Serpent 2 with the latest cross-section data ENDF/B-VIII.0. Steady-state conditions were carried out with a nominal power of 30 MW, while transient under RIA conditions occurred because the control rod was pulled too quickly while the reactor operated. These transient RIA conditions were performed for two cases, during start-up with an initial power of 1 W, and within power range with an initial power of 1 MW. Thermal-hydraulic parameters considered in this study are reactor power, the temperature of the fuel, cladding, and coolant. The calculated maximum fuel temperature at a steady state is 126.02°C. Meanwhile, the calculated maximum fuel temperature during RIA conditions at the initial power of 1 W and 1 MW are 64.38°C and 137.14°C, respectively. There are no significant differences in thermal-hydraulic parameters between each used program. The thermal-hydraulic parameters such as the maximum temperature of the coolant, cladding, and fuel under this postulated RIA condition are within the acceptable reactor operation safety limits.