Suchergebnisse

This paper presents a modular, scalable approach to assembling hierarchically structured neuromorphic Address Event Representation (AER) systems. The method consists of arranging modules in a 2D mesh, each communicating bidirectionally with all four neighbors. Address events include a module label. Each module includes an AER router which decides how to route address events. Two routing approaches have been proposed, analyzed and tested, using either destination or source module labels. Our analyses reveal that depending on traffic conditions and network topologies either one or the other approach may result in better performance. Experimental results are given after testing the approach using high-end Virtex-6 FPGAs. The approach is proposed for both single and multiple FPGAs, in which case a special bidirectional parallel-serial AER link with flow control is exploited, using the FPGA Rocket-I/O interfaces. Extensive test results are provided exploiting convolution modules of 64 × 64 pixels with kernels with sizes up to 11 × 11, which process real sensory data from a Dynamic Vision Sensor (DVS) retina. One single Virtex-6 FPGA can hold up to 64 of these convolution modules, which is equivalent to a neural network with 262 × 103 neurons and almost 32 million synapses. ; Junta de Andalucía TIC- 6091 ; Ministerio de Economía y Competitividad TEC2009-106039-C04-01/02 ; European Union PRI-PIMCHI-2011-0768

This paper describes a convolution chip for event-driven vision sensing and processing systems. As opposed to conventional frame-constraint vision systems, in event-driven vision there is no need for frames. In frame-free event-based vision, information is represented by a continuous flow of self-timed asynchronous events. Such events can be processed on the fly by event-based convolution chips, providing at their output a continuous event flow representing the 2-D filtered version of the input flow. In this paper we present a 32 × 32 pixel 2-D convolution event processor whose kernel can have arbitrary shape and size up to 32 × 32. Arrays of such chips can be assembled to process larger pixel arrays. Event latency between input and output event flows can be as low as 155 ns. Input event throughput can reach 20 Meps (mega events per second), and output peak event rate can reach 45 Meps. The chip can be configured to discriminate between two simulated propeller-like shapes rotating simultaneously in the field of view at a speed as high as 9400 rps (revolutions per second). Achieving this with a frame-constraint system would require a sensing and processing capability of about 100 K frames per second. The prototype chip has been built in 0.35 CMOS technology, occupies 4.3 × 5.4 and consumes a peak power of 200 mW at maximum kernel size at maximum input event rate. ; European Union 216777 ; Gobierno de España TEC2006-11730-C03-01, TEC2009-10639-C04-01 ; Junta de Andalucía P06TIC01417

In this paper we present a very exciting overlap between emergent nanotechnology and neuroscience, which has been discovered by neuromorphic engineers. Specifically, we are linking one type of memristor nanotechnology devices to the biological synaptic update rule known as spike-time-dependent-plasticity (STDP) found in real biological synapses. Understanding this link allows neuromorphic engineers to develop circuit architectures that use this type of memristors to artificially emulate parts of the visual cortex. We focus on the type of memristors referred to as voltage or flux driven memristors and focus our discussions on a behavioral macro-model for such devices. The implementations result in fully asynchronous architectures with neurons sending their action potentials not only forward but also backward. One critical aspect is to use neurons that generate spikes of specific shapes. We will see how by changing the shapes of the neuron action potential spikes we can tune and manipulate the STDP learning rules for both excitatory and inhibitory synapses. We will see how neurons and memristors can be interconnected to achieve large scale spiking learning systems, that follow a type of multiplicative STDP learning rule. We will briefly extend the architectures to use three-terminal transistors with similar memristive behavior. We will illustrate how a V1 visual cortex layer can assembled and how it is capable of learning to extract orientations from visual data coming from a real artificialCMOS spiking retina observing real life scenes. Finally, we will discuss limitations of currently available memristors. The results presented are based on behavioral simulations and do not take into account non-idealities of devices and interconnects. The aim of this paper is to present, in a tutorial manner, an initial framework for the possible development of fully asynchronous STDP learning neuromorphic architectures exploiting two or three-terminal memristive type devices. All files used for the simulations are made available through the journal web site. ; European Union 216777 ; Gobierno de España TEC2006-11730-C03-01, TEC2009-10639-C04-01 ; Junta de Andalucía P06TIC01417