Porous Structure of Ultra-High-Performance Fibre-Reinforced Concretes

Abstract

[EN] The aim of this experimental work was to study the porous structure of Ultra-High-Performance Fibre-Reinforced Concretes (UH) made with different fibre volume contents (0%, 1%, 2%) under several curing conditions (laboratory environment, 20 degrees C, 60 degrees C, 90 degrees C), comparing the results with those recorded for ordinary, high strength and very high strength concretes. Scanning electron microscopy, mercury intrusion porosimetry, thermogravimetry, water absorption and oxygen permeability tests were carried out. The results showed a low portlandite content in UH (in the order of 75% lower than in concrete C50) and a low degree of hydration, but they rise with curing temperature. These concretes have a very fine porous structure, with a high concentration of pores on the nanoscale level, below 0.05 mu m. Their porosity accessible to water is consequently around 7-fold lower than in conventional (C30), 6-fold lower than in high-strength (C50) and 4-fold lower than in very high-strength (C90) concretes. Their oxygen permeability is at least one order of magnitude lower than in C90, two orders of magnitude lower than in C50 and three orders of magnitude lower than in C30. The percentage of added steel fibre does not affect the UH porous structure ; This research was funded by Ministerio de Economia Y Competitividad (Agencia Estatal de Investigacion) of the Spanish Government, Grant number BIA2016-78460-C3-3-R ; Valcuende Payá, MO.; Lliso-Ferrando, JR.; Roig-Flores, M.; Gandía-Romero, JM. (2021). Porous Structure of Ultra-High-Performance Fibre-Reinforced Concretes. Materials. 14(7):1-18. https://doi.org/10.3390/ma14071637 ; S ; 1 ; 18 ; 14 ; 7