Suchergebnisse

This chapter deals with the distortions to price incentives for agriculture that result from the trade, exchange rate and domestic policies in place in the four main South Asian countries, by summarizing and comparing the findings and themes of the more-detailed case studies on India, Pakistan, Bangladesh and Sri Lanka. Attention is paid most to India, which accounts for around four fifths of South Asia's population, Gross Domestic Product (GDP) and agricultural GDP. The principal focus is on the level of and trends in distortions for agriculture as a whole, and how these have changed over time relative to those for non-agricultural traded sectors in these countries. Previous studies have established that in India, Pakistan and Sri Lanka, policies strongly favored manufacturing over the principal agricultural crops, although the extent of anti agricultural bias diminished considerably between the 1970s to 1995. The new country studies extend the earlier estimates up to 2005 and back to 1965, and provide long term estimates of distortions to relative agricultural incentives in Bangladesh for the first time. As well, these new studies broaden the coverage of previous research by including estimates for the fresh fruit and vegetables sector in India, and the dairying sectors in India and Pakistan. In South Asia both of these sectors account for large shares of the rural economy as measured by their contributions to GDP.

Background The main instrument on EU level to control industrial releases is the Industrial Emissions Directive (IED), particularly through the publication of BAT reference documents (BREFs) and related BAT Conclusions, which is the reference for setting the permit conditions throughout EU for IED installations. However, the BREFs published so far do not contain adequate information on specific hazardous chemicals used and released from industry which makes the control difficult for the industry and the permitting and supervising authorities. One of the case sectors in the HAZBREF project is the surface treatment of metals and plastics (STM). This sector was chosen due to the use of chemicals, potential emissions, the wide range of products as well as technological processes and the upcoming STM BREF review. The other HAZBREF case sectors are textile industry and chemical industry which are addressed in separate reports. The lack of knowledge on the use and flow of specific hazardous chemicals in the industrial processes makes chemical control and reduction measures difficult. The problem is that often neither plant operators nor authorities know which substances are relevant to be treated and which handling measures are needed. Surface treatment of metals and plastics is covered by the STM BREF document, published in 2006. According to the last work programme of the EIPPCB the review of the EU STM BREF is planned to start in 2021. Purpose of the document This sectoral guidance contains information on uses of hazardous chemicals, the best practices in chemical management and recommendations on enhancing the permitting process in the STM sector. This document sums up the findings from HAZBREF project and is based on industrial case studies, interviews with authorities and expert judgment. The aim is to describe good practices in chemical management to be utilized by STM installations as well as environmental and chemical authorities. These include technical, organisational and management aspects and concrete tools supporting chemical management. The report addresses the STM sector as a whole in Europe, although the main part of the findings is generated from HAZBREF case installation and other experiences in the Baltic Sea Region. The document provides also general descriptions of BAT proposals related to management of hazardous chemicals and substances. These findings of the guidance will feed into in the forthcoming revision of the STM BREF. They are also to be used for HELCOM recommendations on how to reduce the discharge of hazardous substances into the Baltic Sea. Moreover, the document provides an overview of applicable legal requirements, procedures and other obligations of installation operators regarding use of chemicals and releases of hazardous substances. This includes guidance for tools to identify and assess relevant hazardous substances used and released from the STM installations. Main findings and proposals Improvement of chemical management system A Chemical Management System provides a systematic way of managing chemicals through the whole process on the site. Most of the companies have implemented quality management standards such as ISO 9000, ISO 14000, EMAS and integrated EHS programs which also address certain aspects of chemical management. The quality of chemical management systems in the companies differs depending on the scale of operation, ownership and awareness. Integration of good practices of chemical management within already implemented management systems strengthens the ability to reduce environmental risks. HAZBREF project strongly recommends the establishment and regular use of a chemical management system at IED installations. Development of a chemical inventory The establishment and maintenance of a chemical inventory is an importantprerequisite for effective and responsible chemicals management in the STMsector. All chemicals and raw materials along with information on their propertiesused in all processes and activities at the site should be listed in a database. Such adatabase is a key part of chemical management allowing for systematic riskassessment, management of chemicals flows and their storage. The information in the chemical list/database must be searchable and should be updated regularly. Most of the information needed is available in the safety datasheets (SDS). If some information is missing from the SDS, the supplier should be asked to provide this. Good routines to handle new and updated SDSs are crucial to have an up to date and reliable chemical database. These routines should involve on-site handling and updates as well as communication with suppliers on how SDSs are delivered. Well-managed chemical inventories can significantly simplify the environmental permit application process both for the operators and the permitting authorities. Better use of Chemical Management Tools and training of staf Numerous references and tools are available to support STM companies and competent authorities in implementing the good chemical management required in the IED. HAZBREF recommends that operators use proper tools for risk assessment and evaluation of the efficiency of chemical management. Use and improvement of risk assessment tools such as extended SDS and material flow analysis should be promoted among installation operators in this respect. The HAZBREF project has developed a comprehensive tool that helps the operators to identify the site-specific hazardous substances that should be considered in strategic and operational decisions. Awareness raising and training of staff in the use of chemical management tools and systems is crucial for implementation of good chemical management practices at the installations. Substitution A regular check aiming at identifying potentially new available and safer alternatives to the hazardous chemicals used is an important measure to minimise chemical risks at the installation. A successful substitution work can be performed in four stages: - Identification of hazardous substances - Screening for possible alternatives - Evaluation and choice of alternatives and Development of new alternatives. Substitution can be aimed for any hazardous chemical used at installation level where it is needed in order to protect environment or human health. However, regrettable substitution (i.e. move to use new chemical that is equally or more hazardous than the substituted chemical or results in cross-media effects) must be avoided. Assessment and improvement of SDS Efficient chemicals management requires high quality of the Safety Data Sheets (SDS). The SDS should sufficiently describe the chemical properties and include information about exposure (including use and emissions), eco-toxicology and proper storage and handling. A SDS must also contain information on whether the chemical product contains substances on the SVHC list, priority substances under the Water Framework Directive WFD and the POPs convention. In case a chemical supplier fails to provide a SDS of sufficient quality, it is the duty of both the operator and the competent authority to demand the missing information. This is already required by law in some countries, e.g. Germany. It is also important that the operators know how to extract and consolidate the relevant information from the SDS to their permit applications and verify the quality of different information sources. The development of an extended SDS including exposure scenarios and improved data on environmental effects would facilitate better risk assessment of individual chemicals used in specific processes. This would lead to more efficient monitoring and help focusing on substances of concern. Improved SDSs for raw materials with information on impurities or additives would facilitate more complete chemical inventories. Continuous improvement of BAT implementation The implementation of BAT needs to be continuously monitored and improved at the installation considering site specific technological, economical and environmental aspects. The findings from Polish HAZBREF case studies is that fulfilment of BAT requirements can be challenging if all improvements need to be done in a short time period. For example, closed-loop systems are considered necessary additional process-integrated techniques that it is important to implementstep by step in the installations. Circular economy The STM sector is a significant user of non-renewable resources (metals), and recycling of recovered metal containing materials such as metal substrates orelectrolytes back to the process is good practice. Such recovery processes are widely used for basic metals, such as zinc, copper and nickel, which are used as valuable secondary raw materials SRM. High costs of recovery processes and high energy consumption as well as the variety of chemicals and metals used in STM processes often hinders recycling. In cases where recycling is not feasible, pretreatment of contaminated waste water on site and subsequent off-site treatment of generated metal containing sludges is standard practice. Permitting process Beside best practices in chemical management, the project also elaborated recommendations on enhancing the permitting process in the STM sector. It can be concluded that the existing general structure and content of the permit application procedures are as such sufficient to deal with hazardous substances and chemicals. Nevertheless, in practice the permit process could be improved with more communication between the applicant and the permitting authority during the application phase. More co-operation between chemical, environmental and occupational health authorities is suggested to achieve a smooth information flow and reduce double work regarding requirements under different legislations concerning chemicals and hazardous substances. In some countries, for example in Finland, the supervising practices in different parts of a given country need harmonising so that all installations are treated equally. This requires more and better communication between the respective environmental and chemical authorities within the country. The improved exchange of information and examples of good experiences between Member States would also, in the long run, contribute to more harmonised and better practices on European level. ; Bakgrund Det huvudsakliga instrumentet på EU-nivå för att kontrollera utsläpp från industrin är industriutsläppsdirektivet (IED), särskilt genom publicering av BATreferensdokument (BREF) och relaterade BAT-slutsatser, som är referensen för att fastställa tillståndsvillkoren i hela EU för IED-verksamheter. De hittills publicerade BREF-dokumenten innehåller emellertid inte tillräckligt med information om specifika farliga kemikalier som används och släpps ut från industrin vilket gör kontrollen svår för industrin och tillstånds- och tillsynsmyndigheterna. En av sektorerna som valts ut i HAZBREF-projektet är ytbehandling av metaller och plast (STM). Denna sektor valdes på grund av användningen av kemikalier, potentiella utsläpp, det breda utbudet av produkter samt tekniska processer och den kommande STM BREF-revideringen. De andra sektorerna HAZBREF har fokuserat på är textilindustri och kemisk industri, som behandlas i separata rapporter. Bristen på kunskap om användning och flöde av specifika farliga kemikalier i de industriella processerna gör det svårt att kontrollera och minska kemikalierna. Problemet är ofta att varken verksamhetsutövare eller myndigheter vet vilka ämnen som är relevanta att åtgärda och vilka skyddsåtgärder som behöver vidtas. Ytbehandling av metaller och plast omfattas av STM BREF-dokumentet, som publicerades 2006. Enligt EIPPCB: s senaste arbetsprogram planeras revideringen av STM BREF att börja 2021. Dokumentets syfte Denna vägledning innehåller information om användning av farliga kemikalier, bästa praxis inom kemikaliehantering och rekommendationer för att förbättra tillståndsprocessen inom STM-sektorn. Detta dokument sammanfattar resultaten från HAZBREF-projektet och baseras på fallstudier, intervjuer med myndigheter och expertbedömning. Syftet är att beskriva god praxis inom kemikaliehantering som ska användas av STM-verksamheter samt miljö- och kemikaliemyndigheter. Dessa inkluderar tekniska, organisatoriska och hanteringsaspekter och konkreta verktyg som stöder kemikaliehantering. Rapporten behandlar STM-sektorn som helhet i Europa, även om huvuddelen av resultaten härrör från verksamheter som har deltagit i fallstudierna och andra erfarenheter i Östersjöregionen. Dokumentet innehåller också allmänna beskrivningar av BAT-förslag relaterade till hantering av farliga kemikalier och ämnen. Dessa resultat i vägledningen kommer att ingå i den kommande revideringen av STM BREF. De kan vidare användas för HELCOMrekommendationer om hur man kan minska utsläppen av farliga ämnen i Östersjön Dessutom ger dokumentet en översikt över tillämpliga lagkrav, förfaranden och andra skyldigheter för verksamhetsutövare beträffande användning av kemikalier och utsläpp av farliga ämnen. Detta inkluderar vägledning för hur man kan identifiera och bedöma relevanta farliga ämnen som används och släpps ut från STM-anläggningarna. Huvudsakliga resultat och förslag Förbättring av kemikaliehanteringssystemet Ett kemikaliehanteringssystem ger ett systematiskt sätt att hantera kemikalier genom hela processen på anläggningen. De flesta av företagen har implementerat olika standarder som ISO 9000, ISO 14000, EMAS och integrerade EHS-program som också behandlar vissa aspekter av kemikaliehantering. Kvaliteten på kemikaliehanteringssystem i företagen varierar beroende på deras storlek, ägarförhållanden och medvetenhet. Integrering av god praxis för kemikaliehantering i redan implementerade ledningssystem stärker förmågan att minska miljörisker. HAZBREF-projektet rekommenderar upprättande och regelbunden användning av ett kemikaliehanteringssystem vid IED-verksamheter. Utveckling av en kemikalieinventering Att upprätta och underhålla en kemikalieinventering är en viktig förutsättning för en effektiv och ansvarsfull kemikaliehantering inom STM-sektorn. Alla kemikalier och råvaror som används i alla processer och aktiviteter på anläggningen bör, tillsammans med information om deras egenskaper, listas i en databas. En sådan databas är en viktig del av kemikaliehanteringen och möjliggör systematisk riskbedömning, hantering av kemikalieflöden och lagring. Informationen i kemikalielistan/databasen måste vara sökbar och bör uppdateras regelbundet. Merparten av den information som behövs finns i säkerhetsdatabladet (SDS). Om viss information saknas i säkerhetsdatabladet bör leverantören uppmanas att lämna denna. Bra rutiner för att hantera nya och uppdaterade säkerhetsdatablad är avgörande för att ha en uppdaterad och pålitlig kemikaliedatabas. Dessa rutiner bör omfatta hantering och uppdateringar på plats samt kommunikation med leverantörer om hur säkerhetsdatablad levereras. Välskötta kemikalielistor/databaser kan avsevärt förenkla ansökan om miljötillstånd för både verksamhetsutövare och tillståndsmyndigheter. Bättre användning av verktyg för kemikaliehantering och utbildning av personal Många referenser och verktyg finns tillgängliga för att stödja STM-företag och behöriga myndigheter i genomförandet av den goda kemikaliehanteringen som krävs i IED. HAZBREF rekommenderar verksamhetsutövare att använda lämpliga verktyg för riskbedömning och utvärdering av kemikaliehanteringens effektivitet. Användning och förbättring av riskbedömningsverktyg som utökade säkerhetsdatablad och analys av materialflöden bör främjas bland verksamhetsutövare i detta avseende. HAZBREF-projektet har utvecklat ett omfattande verktyg som hjälper verksamhetsutövarna att identifiera platsspecifika farliga ämnen som bör beaktas i strategiska och operativa beslut. Att öka medvetenheten och att utbilda personal i användningen av verktyg för kemikaliehantering och kemikaliehanteringssystem är avgörande för genomförandet av god kemikaliehanteringspraxis vid verksamheterna. Substitution En regelbunden kontroll som syftar till att identifiera potentiellt nya tillgängliga och säkrare alternativ till de farliga kemikalier som används är en viktig åtgärd för att minimera kemiska risker vid verksamheten. Ett framgångsrikt substitutionsarbete kan utföras i fyra steg: - Identifiering av farliga ämnen - Screening efter möjliga alternativ - Utvärdering och val av alternativ och Utveckling av nya alternativ. Substitution kan riktas mot alla farliga kemikalier som används på verksamheten där det behövs för att skydda miljön eller människors hälsa. Substitution som senare ångras (dvs. byta till att använda en ny kemikalie som är lika eller mer farlig än den substituerade kemikalien eller som resulterar i tvärmedieeffekter) måste undvikas. Bedömning och förbättring av säkerhetsdatablad Effektiv kemikaliehantering kräver hög kvalitet på säkerhetsdatablad (SDS). Säkerhetsdatabladet bör beskriva de kemiska egenskaperna tillräckligt och innehålla information om exponering (inklusive användning och utsläpp), ekotoxikologi och korrekt lagring och hantering. Ett SDS måste också innehålla information om huruvida den kemiska produkten innehåller SVHC-ämnen, prioriterade ämnen enligt vattendirektivet WFD och POPs-konventionen. Om en kemikalieleverantör inte tillhandahåller ett säkerhetsdatablad av tillräcklig kvalitet är det både verksamhetsutövaren och den behöriga myndighetens skyldighet att kräva informationen som saknas. Detta krävs redan enligt lag i vissa länder, t.ex. i Tyskland. Det är också viktigt att verksamhetsutövarna vet hur man tar fram och sammanfattar relevant information från säkerhetsdatabladet till sina tillståndsansökningar och verifierar kvaliteten på olika informationskällor. För att förbättra riskbedömning av enskilda kemikalier, som används i specifika processer, kan ett utökat säkerhetsdatablad inklusive exponeringsscenarier och förbättrade data om miljöeffekter underlätta. Detta skulle leda till effektivare övervakning och hjälp med att fokusera på ämnen som är farliga. För att få mer fullständiga kemikalieinventeringar kan förbättrade säkerhetsdatablad för råvaror med information om föroreningar eller tillsatser underlätta. Kontinuerlig förbättring av implementeringen av BAT Implementeringen av BAT måste kontinuerligt övervakas och förbättras vid verksamheten med beaktande av platsspecifika tekniska, ekonomiska och miljöaspekter. Resultaten från de polska HAZBREF-fallstudierna är att uppfyllandet av BAT-kraven kan vara utmanande om alla förbättringar behöver göras på kort tid. Till exempel anses slutna system vara nödvändiga ytterligare processintegrerade tekniker som det är viktigt att implementera steg för steg i verksamheten. Cirkulär ekonomi STM-sektorn är en betydande användare av icke förnybara resurser (metaller), och återvinning av återvunna metallinnehållande material såsom metallsubstrat eller elektrolyter tillbaka till processen är god praxis. Sådana återvinningsprocesser används ofta för basiska metaller, såsom zink, koppar och nickel, som används som värdefulla sekundära råvaror (SRM). Höga kostnader för återvinningsprocesser och hög energianvändning samt de många olika kemikalier och metaller som används i STM-processer hindrar ofta återvinning. I de fall återvinning inte är möjlig är förbehandling av förorenat avloppsvatten på plats och efterföljande behandling av genererat metallhaltigt slam praxis. Tillståndsprocessen Förutom bästa praxis inom kemikaliehantering utarbetades även rekommendationer för att förbättra tillståndsprocessen inom STM-sektorn. Man kan dra slutsatsen att den befintliga allmänna strukturen och innehållet i tillståndsansökningsförfarandena som sådana är tillräckliga för att hantera farliga ämnen och kemikalier. I praktiken kan tillståndsprocessen ändå förbättras med mer kommunikation mellan den sökande och tillståndsmyndigheten under ansökningsfasen. Mer samarbete mellan kemikalie-, miljö- och arbetsmiljömyndigheterna föreslås för att uppnå ett smidigt informationsflöde och minska dubbelarbete avseende krav enligt olika lagstiftning om kemikalier och farliga ämnen. I vissa länder, till exempel i Finland, måste praxis för tillsyn och övervakning i olika delar av landet harmoniseras så att alla verksamheter behandlas lika. Detta kräver mer och bättre kommunikation mellan miljö- och kemikaliemyndigheter i landet. Det förbättrade informationsutbytet och exempel på goda erfarenheter mellan medlemsstaterna skulle också på sikt bidra till mer harmoniserad och bättre praxis på europeisk nivå.

nvironmental risk posed by emissions of chemicals contained in products is an important issue that has been, so far, investigated to a relatively limited extent. In response, the research program ChEmiTecs was set up specifically to improve the understanding of mechanisms, magnitude of emissions on the national Swedish scale, as well as perception about, and management strategies of emissions of additives and other organic substances from articles to the environment. Additives are, as the name indicates, added to a material. This is done with a purpose to improve the properties of the product in its intended use. The societal benefit of, e.g., flame retardants is immense as they contribute to reduce the risk of fire. In order to maintain the purpose of the additive, it should stay in the product. The fact that additives are nevertheless released to some extent is therefore rather an unwanted consequence. In order to understand the mechanisms and magnitude of the emissions, different methods were combined: A product – material – substance inventory was developed of the flows and stocks of the relevant articles and their material constituents with their content of relevant substances, typically organic functional additives. The inventory was based on national trade statistics and well-informed estimates of life length, areas of the articles, and additive content as inventory elements. The research showed that it is possible to use national trade statistics as a starting point to estimate societal stocks of additives, and a total amount of 3×106 tonnes of organic chemical additives was estimated to be stored in plastic materials in articles within the Swedish technosphere. Product categories of particular interest are plastic products such as pipes and hoses, films and boards, and the plastic components of other products such as insulated wires and cables, furniture (sofas), and passenger cars including tires. Chemicals stored in large amounts are typically plasticizers (including the groups phthalates and adipates), organic pigments and flame retardants (for example brominated or phosphorous-based flame retardants). Computational models were applied for calculating product-group and nation-wide emissions based on the inventory. A simple model selected from literature was used to provide a rough estimate with the widest possible coverage for National scale emissions with manageable data need. An advanced computational model was also developed in the program. This model was calibrated by controlled emission chamber experiments for a small sample of test cases, and was then applied to a limited number of detailed product inventories. Results of these data-intensive calculations in the advanced model were also validated against measured concentrations in the environment. The results were then compared with results of the rough model, to get an idea of the accuracy of the national estimate. The ChEmiTecs assessments indicate national molecular emissions to air of plastics additives from the societal stock of material and products NATURVÅRDSVERKET RAPPORT 6802 Rapport 8 during their service life to be in the order of 500 tonnes per year. As an approach to getting an idea of the severity of these emissions, a comparison was made with intentionally released biocides. As chemical substances may have very different properties in terms of potential harm to the environment, a direct comparison in terms of mass flow is not very meaningful. Instead, substance emissions were recalculated to ecotoxicity scores with a model developed in the life cycle assessment science domain. The scores obtained indicate lower overall ecotoxicity potential of emissions of additives on the national Swedish scale compared to biocides. The results need to be taken with great precaution as there were significant data gaps. Emissions from waste and waste management were also not included in this calculation. The mechanisms determining the emissions are complex. But at least the results from the research confirm some basic circumstances: - Products with a large surface area (e.g. upholstered furniture, pipes and hoses, polymer films, etc.) were identified to favour emissions. Given a certain combination of material and additive, the emissions will be roughly proportional to the area of the object. - Smaller molecules are more likely to be emitted than big ones. "Small" and "Big" may refer to the molecular weight, but also to the shape of the molecule, so that stretched out molecules with long branches are getting more entangled in the matrix material than compact molecules with short branches, and therefore tend to emit more slowly. - Higher temperature will typically result in higher emissions, which was exemplified with releases of Tri-phenyl-phosphate (TPP) from flat computer screens. - The specific affinity of the additive to the matrix material is important, but it is a complex issue, as it depends on properties for both the additive and the matrix. - An additive's tendency to transfer to the surrounding medium is typically expressed as a partitioning coefficient. For semi-volatile and low volatility chemicals, to which groups additives often belong, the release rate is more determined by the molecule's tendency to transfer from the surface to the surrounding medium than the migration rate within the matrix. To summarize, it appears evident that the combined properties of the material and the molecule as well as the surrounding conditions are crucial for the emissions. Emissions from articles cannot fully explain the environmental occurrence of the substances in a certain location or Nation, thus other sources such as direct industrial releases and/or atmospheric long-range transport may be equally or more important. However, in the indoor environment, consumer products including building materials are more or less the sole sources of many organic chemicals, and may thus have a significant contribution to overall human exposure. Chemicals of particular interest are plasticizers and flame retardants, e.g. phthalates and organophosphates. Common for NATURVÅRDSVERKET RAPPORT 6802 Rapport 9 these substances are that many of the products they occur in are used in the indoor environment (plastic flooring, furniture). Accounting for article lifetime and typical release rates as calculated in ChEmiTecs and supported by other work in literature indicates very clearly that more than 90 % and in most cases more than 99 % of the added chemical additives remain in the products at the end-of-life, which means that the major share of the originally added substance of the substances will enter the waste and recycling streams. This is important to consider as they may be eliminated if the products are incinerated, or re-circulated into new materials and products if the material is recycled. According to the surveys conducted within the program with consumers and producers during the year 2012, emissions from articles are not generally perceived to be of major concern from a health or environmental perspective. Producers were of the opinion that they have the necessary tools to perform risk assessments, and they are reasonably content with the current legislation. Consumers were mostly concerned with potential risks for workers and to the local environment near production plants. Studies carried out within ChEmiTecs also showed that the Swedish environmental goals are in general terms not important drivers towards voluntary agreements to change chemical contents in consumer articles. Here, stricter requirements are therefore needed to promote change. The following recommendations were formulated on the basis of the outcome of the research: • The accessible information about content of additives and other chemicals in articles is quite limited. Supply chains consist of several steps, and companies selling articles on the market are often not aware of the additives content of their products. Article 33 in REACH is in theory a mechanism requiring such companies to know their articles' content. Ideally, this additive content information should be combined with the collection of statistical information on trade. A requirement from authorities and a registry of additive content in articles, analogous to the "Product registry" for chemicals and blends operated by the Chemicals Agency, could potentially be a suitable mechanism to push for such information. This is essentially a pre-requisite for reliable estimates of stocks of chemicals from products in the future. • Within its Environmental monitoring activities, Swedish EPA carries out regular screenings campaigns of chemicals in the environment. Screening activities of chemical content in products would be a good complement, which would contribute to knowledge on additives and other chemicals content in articles. Similarly, we emphasize the need for new requirements on emission testing of a wider range of chemicals. Providing sufficient data availability, the NATURVÅRDSVERKET RAPPORT 6802 Rapport 10 ChEmiTecs emission model could be an important tool to assist in such assessments. • It should be evaluated whether product specific rules could be suitable as a complement to REACH for consumer articles where hazardous chemicals are present and the use is widespread, such as textiles and building products. • Producers should strive to minimize the content of chemicals with hazardous properties in general and in particular in products made of porous materials and/or of large surface areas aimed for use in the indoor environment. • Emissions from multilayer products and via migration and abrasion need to be further investigated. More recent research indicates that direct migration to dust can contribute significantly to the levels found in the indoor environment. • Since the major share of the chemical additives are estimated to remain in articles at the end of their life there is a need for alertness among waste managers and recycling industry to handle this. Information about the content of goods that reach the waste stream could contribute to this. ; n Varor (Organic Chemicals Emitted from Technosphere Articles - ChEmiTecs) var ett forskningsprogram som löpte under åren 2007-2013 och som finansierades av Naturvårdsverket. Målet med programmet var att öka förståelsen av mekanismer, omfattningen och konsekvenserna av utsläpp av organiska ämnen från varor. I samarbete med myndigheter, tillverkare och nedströmsanvändare identifierades tekniska och sociala aspekter som bidrar till problemet med utsläpp från varor, i syfte att skapa en gemensam förståelse för problemet och dess sammanhang. En urvalsstrategi togs fram i syfte att identifiera problematiska ämnen, varor och användningsmönster. Därefter kvantifierades utsläpp av ett litet urval av ämnen från varor och uppskattades med hjälp av modellbaserad extrapolering för ett stort antal andra ämnen. Betydelsen av dessa utsläpp bedömdes bland annat i förhållande till andra utsläppskällor. Forskningen visade att det är möjligt att använda den nationella handelsstatistiken som en utgångspunkt för att bedöma mängden av kemiska ämnen som är upplagrade i samhället, och totalt uppskattades den upplagrade mängden av organiska kemiska additiv i plastmaterial i varor i den svenska teknosfären till 3×106 ton. Produktkategorier av särskilt intresse är rör och slangar, plastprodukter såsom plastfilm och skivor, isolerade ledningar och kablar, möbler (soffor) samt personbilar inklusive däck. Kemikaliegrupper som är upplagrade i stora mängder är framför allt mjukgörare (inklusive grupper såsom ftalater och adipater), organiska pigment samt flamskyddsmedel (till exempel bromerade och fosforbaserade flamskyddsmedel). Emissioner av kemikalier från varor bedömdes genom att kombinera olika skattningsmetoder med beräkningsmetoder som kalibrerats med hjälp av kontrollerade experiment samt genom dubbelkontroll där spridningsmodeller anpassades med stöd i empiriska miljödata. De beräkningar som gjorts inom programmet tyder på att den enkla modell som tillämpades för att beräkna emissioner på nationell skala för ett brett antal produktgrupper överskattar utsläppen av plasttillsatser från produkter. Resultat från den mer avancerade beräkningsmodellen som utvecklades inom programmet tyder på att utsläppen från varor i medeltal motsvarar ca 0.2 promille av de additiver som finns upplagrat i varorna. För vissa produktgrupper kan dock utsläppen uppgå till några procent av den upplagrade mängden. Utifrån antagandet att 0.2 promille av de upplagrade kemikalierna emitteras från varor, uppskattades de årliga nationella utsläppen av plasttillsatser i den samlade materialstocken till i storleksordningen 500 ton. Uppskattningen 500 ton per år enligt ovan måste ses som en grov och relativt osäker skattning, eftersom mekanismerna för ämnens avgång från ett material är komplexa. Det är de kombinerade egenskaperna hos materialet, molekylen och omgivande miljön som är avgörande för utsläppen. Vissa samband kan lyftas fram: NATURVÅRDSVERKET RAPPORT 6802 Rapport 12 - Produkter tillverkade med en stor ytarea (till exempel stoppade möbler, rör och slangar och bildäck) verkar ge upphov till höga utsläpp. - Små molekyler emitteras i större grad än stora molekyler. Här hänvisar små och stora molekyler både till molekylvikt men även till molekylstruktur, där avlånga förgrenade molekyler ofta hindras av materialet i matrisen och därmed tenderar att emitteras långsammare. - Temperatur är en viktig faktor som påverkar utsläppen. Högre temperatur kan leda till högre utsläpp, vilket inom programmet påvisats med försök på utsläpp av trifenylfosfat (TPP) från LCD-skärmar. - Additivets affinitet till materialmatrisen är en viktig men komplex faktor som påverkar utsläppen, då affiniteten påverkas av egenskaperna hos både additivet och materialet. - Additiver kategoriseras vanligen som semiflyktiga eller lågflyktiga ämnen. Avgången av dessa ämnen från ett matrismaterials yta verkar avgöras i många fall i högre utsträckning av ämnets benägenhet att gå över till omgivningsmiljön, t ex förångas från ytan, än av migrationshastigheten i matrismaterialet. Med produktens livslängd i beaktande uppskattades mer än 90 % och i de flesta fall mer än 99 % av de tillsatta kemiska additiven finnas kvar i produkterna i slutet av dess livslängd, vilket innebär att de flesta av additiven kommer in i avfalls- och återvinningsleden. Där kan de elimineras om produkterna förbränns, eller så kan additiven återcirkuleras in i nya material och produkter vid materialåtervinning. Forskningen inom programmet visar att utsläpp från produkter inte helt kan förklara förekomsten av ämnena i den yttre miljön. Således kan andra källor såsom industriella utsläpp och långväga transport via luft även vara viktiga. När det gäller inomhusmiljön är konsumentprodukter, inklusive byggmaterial mer eller mindre de enda källorna till förekomsten av många organiska ämnen (till exempel ftalater och organofosfater), vilket kan ha betydelse för människors exponering. Enligt de undersökningar som gjordes inom programmet under år 2012 med avseende på konsumenters och producenters inställning till emissioner från varor är slutsatsen att utsläpp från varor i allmänhet inte uppfattas som ett stort hälso- eller miljöproblem. Producenter var av den uppfattningen att de har de nödvändiga verktygen för att utföra riskbedömningar, och de är ganska nöjda med den nuvarande lagstiftningen, vilken också är den starkaste drivkraften i deras miljöarbete. Konsumenterna var av uppfattningen att riskerna är störst för arbetstagare och den lokala miljön i närheten av produktionsanläggningar. I allmänhet föredrar konsumenter märkning för att kommunicera produktinnehåll. I syfte att belysa problematiken vad gäller risker för miljön gjordes en jämförelse av möjlig giftpåverkan på vattenmiljö (potentiell ekotoxicitet) mellan plastadditiv och biocider med hjälp av en beräkningsmodell som traditionellt används inom livscykelanalysforskningen. Beräkningarna visar att den totala möjliga giftpåverkan av utsläppta NATURVÅRDSVERKET RAPPORT 6802 Rapport 13 tillsatsämnen från plastprodukter i Sverige är lägre än den är från avsiktligt utsläppta biocider. Dock omfattar denna analys inte alla relevanta effektmått och det var heller inte möjligt att bedöma samtliga plastadditiv på grund av databrist. Utsläpp från avfallsledet finns heller inte med i denna beräkning. I allmänhet är kunskapsluckorna fortfarande stora när det gäller egenskaper och toxicitet av kemiska tillsatser i konsumentprodukter, vilket minskar möjligheten till en gedigen utvärdering och dimensionering av hälso- och miljöpåverkan av kemikalier i varor ur ett riskperspektiv. Studierna inom ChEmiTecs visade att de svenska miljömålen i sig inte utgör några viktiga drivkrafter för att träffa frivilliga överenskommelser med syfte att ändra kemikalieinnehåll i konsumentvaror. Studierna indikerade också att marknadstrycket för att få producenter att ändra innehåll är ganska svagt, även om arbete pågår inom vissa branscher. Drivkrafter i dessa fall är typiskt kommande lagstiftning eller förväntad kommande lagstiftning. Resultat framtagna inom ChEmiTecs-programmet visar även på ett behov av att stärka den produktspecifika lagstiftningen som ett komplement till REACH i syfte att minska riskerna med farliga ämnen för vissa produkter, exempelvis byggprodukter och textilier. Följande rekommendationer formulerades på grundval av resultatet av forskningen inom programmet: • Information om additivinnehåll i varor är fortsatt starkt begränsad. I många fall är nedströms varuproducenter också begränsat medvetna om förekomsten av additiver i materialen i sina produkter. Artikel 33 i REACH föreskriver att leverantörer ska kunna förmedla information om ämnen på kandidatlistan över föreskriven halt i sina produkter, vilket indirekt innebär ett krav på att veta det faktiska innehållet i varor. En mekanism för att åstadkomma bättre information om upplagring av additiver i varor i samhällets materialstock, och emissioner av dessa, vore att ha ett register över varors innehåll liknande Kemikalieinspektionens Produktregister för kemikalier och beredningar, kombinerat med dagens statistik över med Industrins varuproduktion och varuimport och –export. • Som komplement till dagens screeningprogram som mäter upp och övervakar halter av kemikalier i miljön, rekommenderar vi att det via lämpliga marknadskontrollmyndigheter och Naturvårdsverket satsat på ett "screeningprogram" för kemikalier i varor. En del av en sådan satsning kan också vara att implementera nya krav på utsläppstester, t ex med hjälp av emissionskammare, av ett bredare spektrum av ämnen. Sådana krav kan till exempel kopplas till ovan nämnda produktspecifika lagstiftning, för att driva utveckling mot lägre konsumentexponering från varor. • Lagstiftare bör utvärdera om produktspecifika regler skulle kunna vara ett lämpligt komplement till REACH för konsumentprodukter där farliga ämnen NATURVÅRDSVERKET RAPPORT 6802 Rapport 14 förekommer och användningen är utbredd, såsom t ex textilier och byggprodukter • Producenter bör sträva mot att minimera innehållet av ämnen med farliga egenskaper i produkter tillverkade av porösa material eller som har stora ytor, i synnerhet i sådana produkter som är avsedda för användning inomhus. • Utsläppen från flerskiktsprodukter och via direkt migration till damm samt via slitage behöver utredas ytterligare. Aktuell forskning visar att direkt migration från produkter till damm kan ge ett betydande bidrag till kemikalienivåerna som påvisas i inomhusmiljön. • Eftersom huvuddelen av tillsatta kemiska additiv bedöms finnas kvar i produkterna i slutet av deras livslängd behöver det finnas beredskap i avfalls- och återvinningsleden att hantera detta. Information om varornas innehåll som även når avfallsledet skulle kunna bidra till denna hantering.

From the introduction: Ongoing globalization leads to the metamorphosis of social and economic structures and changes the scope of national governmental and non-governmental institutions. Not at least, it changes the aspect of national mentality. The creation of the European Union in 1957 is only one example for the fusion of economic and political domains. In fact, financial and capital markets liberalize, the number of global player rise, and the establishment of international non-governmental organizations increased from 1956 to 1997 by 1,600 % from 985 to 15,965. On the whole, the opportunities for business´ to take influence on the global level are higher and probably more necessary than ever before in history. Economic interrelations and dependencies, international scarcity of non-renewable energy resources and the global climate disaster lead to the necessity of introducing international institutions that act not only in national interest, but serve for the global stabilization of the world economy and its sustainability. A new aspect or logic consequence of globalization arises: Global Governance (in the following abbreviated as GG). GG is one major concomitant phenomenon in the ideology in the disparity in national interests of sovereign states. This difference in the interests of individual items compared to the interests of the entire society exists as long as human beings. Literature calls it the 'moral hazard phenomenon'. There might be common, as well as divergent interests on an efficient solution of various problems, for example in the areas of shelter for refugees and asylum seeker, the problem arising from weapons of mass destruction and the regulations of CO2 emissions. With ongoing globalization there arises a complex multidimensional competition framework. Not only global commercial companies, but also national entities start to compete in terms of production factors, fiscal and political environment and legal frameworks with each another. Figure 1 illustrates the global competition framework by showing up the interrelation among country A and country B. The countries are illustrated including first, their official political entity (government) and secondly, to the Trans-National Companies (in the following abbreviated with TNCs) operating within the country. The third party illustrated is 'the employment'. National government, TNCs and the employment of civil society are interrelated with each another within one country in two directions. Firstly, the TNCs affect the employment and therefore as a result, the government. The higher the action of TNCs within the country, the higher is the employment rate of the civil society (the lower the unemployment). The lower the unemployment rate, the more satisfied the civil society is, and therefore the more powerful the government becomes (because of higher chances to be re-elected). Secondly, the government has impact on the benefits and competitive advantage of TNCs. The better the education policy, the more valuable becomes the human capital. The better the human capital, the more efficient and thus the higher the productivity of TNCs becomes. On a whole, national government can create benefit for TNCs and the other way around. Figure 1 also illustrates the competitive relationship among country A and country B. Both countries compete in terms of providing attractiveness to the TNCs. Attractiveness can be reached by the creation of valuable factors (such as skilled labour et al.). However, this skilled labour also needs to be attracted. As the model introduces a second country, skilled labour can easily move to a place with better factors for the society (better living conditions, better security system, better employment chances, better environmental care, and much more). Though, governments do not only compete for TNCs, but in addition to that for civil society and as a result, finally for voters and power. To sum up, TNCs compete with each other in terms of production. Governments compete with each other in terms of factors. Both, TNCs and the national government, depend from each another and can therefore form an alliance in order to gain in competitive advantage and Global Power (abbreviated in the following as GP). From the aim driven point of view (as explained further in section 1.3.2), GG aims to face and to deal with global challenges in order to balance the markets, to maximize overall welfare and aspire an equal distribution of resources and wealth all over the world. At the same time, GG can be used as a strategic measure and a tool for regulating markets and gaining in competitive advantage and GP. This thesis is going to deal with GG as business strategy based on the neo-realistic approach. The increased presence of TNCs in local economies as a strategy to ensure market control has been labelled 'glocalization'. Research Question: At least after WW II, global society started to realize the ongoing trend for economic trade-off, liberalization of markets and the principle of the invisible hand; not only on a national stage, but on the global layer. National boarders melt, since the action of trade, the economic power, now shifts from the national level to a global degree. International acting companies gain in power and influence with, for instance, direct investments, rising turnover, increased cash flows, and not at least with their bargaining power (in the following abbreviated with BP). The increase in BP is often linked to (global) political activities. Global player, such as TNCs, serve often as a tie between several nations and economies. Though, there are still national governments, and national interests that are not to bring in line with the interests of the global society as a whole. There sometimes might be also dissensions among governments and the TNCs operating in the same arena. The crucial factor then is the BP of the actor. It is not always the case, that government and TNC are equal in having BP. Often there arises an asymmetric dependency, which causes a drop of BP for one of the parties. That disparity and the management of different parties' interests in general, is what Global Governance is all about. During the last 50 years, companies used their BP in order to implement national lobbying as an instrument for gaining in Global Power (in the following abbreviated as GP). Now, as national levels are detached from global platforms and by the GG framework, there arises one important question: Is Global Governance a useful strategy tool for the business sector? In most literature, Global Governance is defined to be an aim driven, goal oriented approach in order to solve problems resulting by the globalization process. But there is only little research in order to find an explanation of how exactly GG is organized. The first essential question to answer now is: What are the factors that influence GG? The second question is: How do these factors influence GG? Third question is: Is there a relation between GG and GP? Last question: Can GG be used as a business strategy in order to increase GP? If yes, how? Research Methods: The thesis´ objective is it to figure out the relationship of involvement into Global Governance and the business´ Global Power. It is pre-assumed that an increase in Global Power leads to an increase in a business market dominating power. Thereby it will be found out, what particular can be done to gain in Global Governance involvement. Several strategies are imaginable. This thesis will work out a new strategy approach by combining 1) Porter's 5 Forces model with 2) Hirschman's model of 'voice and exit" strategies. Further the framework of Global Governance will be transferred to the traditional 5 forces model in order to detect the location of Trans-National Companies in their competitive environment. Further an additional sixth force is going to be introduced. After analyzing the competitive environment of Trans-National Companies and the impact of governmental institutions on the industry, several strategies for gaining in Global Power will be developed, using the new hybrid strategy approach as a tool. In the section of definitions (1.3), the thesis and their basic components are going to be analyzed and explained. Within the theory framework (2.1-2.4), the thesis will be set up theoretically. The case study of Gazprom as Trans-National Company will transfer the theoretical model to a practical example. Thus, Russian influence on the world market (for energy) rises, and the situation concerned Europe directly, the example chosen is very relevant and of actuality. In the end the findings will be evaluated. The unit of analysis used in the theory framework is based on the global level. That is rationale because Global Actors in general are going to form the basis of the framework. However, the topic itself implies choosing the global level as unit of analysis. The case study will concentrate on a specific firm. Here it will be switched to the firma level as unit of analysis. That makes sense, because there are only little volumes of industries that do globalize. On the other hand on the global level there is already everything globalized. Only the smallest unit of analysis fits here, because on the firm level there can be made a decision if to go global or not. Further the unit of the other player is scaled in the same small way.Inhaltsverzeichnis:Table of Contents: 1.Introduction7 1.1Research Question10 1.2Research Methods11 1.3Terms and Definitions13 1.3.1Globalization13 1.3.2Global Governance15 1.3.3Power20 1.3.4Strategy27 2.Theory Framework30 2.1Global Actors in Global Governance's Competitive Environment30 2.1.1The Role of Civil Society in Global Governance30 2.1.2The Role of International Organizations in Global Governance32 2.1.3The Role of the State in Global Governance33 2.1.4The Role of TNC in the Global Governance36 2.2Porters 5 Forces Industry Analysis of TNCs37 2.2.1Rivalry37 2.2.2Threat of Substitutes41 2.2.3Threat of New Entrants42 2.2.4Bargaining Power of Buyer and Supplier43 2.3The Government and International Organizations as Sixth Force45 2.4Elaboration of TNCs´ BP Rising Strategies52 2.4.1Self Regulatory Institutions (SRIs)54 2.4.2Privatization of the Public Sector54 2.4.3Quasi-Regulation55 2.4.4Public-Private Partnerships (PPPs)55 2.5Conclusion of Theory Framework57 3.Case Study: Gazprom61 3.1History Background of Russians Policy61 3.2Economy Background63 3.3Strategy framework64 3.3.1Gazprom and Russia64 3.3.2Gazprom and NGO´s65 3.3.3Gazprom and Europe66 4.Conclusion69 Bibliography70 Appendix72Textprobe:Textprobe: Chapter 2.2, Porters 5 Forces Industry Analysis of TNCs: Figure 11 sums up the transformation of GAs to the Porter's model. It illustrates the factors that influence the competitive environment in GG in terms of Global Power of TNCs. In the following it will be provided an analysis of the relevant forces and the competitive environment of TNCs on the GG layer in terms of GP. That analysis serves the purpose to detect the best fitting strategy for TNCs in order to increase the industry's BP. 2.2.1, Rivalry: Strong competition among rival firms decreases profits and makes the industry less attractive. However, competition is not always perfect and firms are not only price takers, but strive for a competitive advantage over their rivals, too. The intensity of rivalry is influenced by a set industry characteristics. The traditional aspects are the volume of competitors, the market growth, the aspect of the entrance cost and exit costs, the switching costs and the level of product differentiation. Rivalry will be increased by a larger number of firms, because more firms must compete for the same purpose. Rivalry even intensifies, if the firms have similar market volume and impact. When looking at the TNCs as firms, who compete for GP, there is a large number of such. In comparison, there are a lot of global player coming from different countries, representing different intentions, but only less alternatives to influence a global decision making process, or a national decision making process, that affects the world globally (demand). In fact, there are in total sum 44,000 TNCs in the world, with 280,000 subsidiaries and an annual turnover of US$ 7,000 billion. Two-thirds of world trade results from TNC production networks. The share of world GDP controlled by TNCs has grown from 17 percent in the mid-60s to 24 percent in 1984 and almost 33 percent in 1995 (UNCTAD). 51 of the world's largest economies are in fact TNCs. Continuous mergers and take-overs have created a situation in which almost every sector of the global economy is controlled by a handful of TNCs. On a whole the total volume of TNCs is rather high; however there is only little Global Power available. Due to that aspect, rivalry is high. If there is a growing market, firms are able to increase revenues simply because of the economic growth itself. A slow market growth causes firms to combat for market share and rivalry grows. Here we are talking about the market of GP in GG. The market size is only hard to measure. However it will be assumed that ongoing globalization is the factor that results in a growth in the market for assessing GP in GG. According to that argument, rivalry will be decreased within the industry of TNCs. When the majority of costs are fixed, the firm must produce near capacity to attain the lowest unit costs. Since the firm must sell a larger quantity of the product in order to benefit from economies of scale, high levels of production lead to a fight for market share and results in increased rivalry. In this case the 'product' TNCs produce is too abstract, to link it anyhow to fix or variable costs. What TNCs 'sell' is not their actual product (e.g. General Motors sells cars), but the influence they have in economy. As a result, it can be said that the more BP a TNC already has, the more influence it has, the lower costs every additional unit added. So the theory of economies of scale can be covered. However, there are no other fixed costs than the fixed costs of running the business anyhow. To sum up, it can be said that the fixed costs in the TNC´s industry are indifferent. However, there can be detected an economies of scale effect. Thus, rivalry in the existing market becomes higher. When a customer can freely switch from one product to another there is a greater struggle to capture customers. Low switching costs increase rivalry. The customer in our case is the national government (or International Organization) as GA who uses the BP of a TNC as product in order to benefit from it in terms of increasing its own GP. Switching costs may arrive when asking which TNC in detail to support. There might be done distinctions from TNCs operation industry (such as energy sector, security sector or media business). This notion leads to the argument of diversification of the product, which will be explained further. In addition here plays the linkage of the TNC an essential role; If the TNC is somehow linked to activities with other GAs. Thought, switching costs in general are assumed to be high, not at least of the lack in trust, experience, information and transparency. Therefore rivalry rises. Low levels of product differentiation leads to higher levels of rivalry. The product itself is defined to be the GB. That influence can be differentiated first in the sense of the actual product offered. Textile producer may have an other channel of influence than companies in the energy sector. It can be detected that most of the TNCs are operating in the industry of petroleum exploiter, processor and distributor (see appendix 1 and 2). What exact relationship there exists is not part of this thesis, however it will be assumed that there must be 'better preferred' industriey. The second and probably related influence measure tool is the 3 dimensions of power approach. Each industry and each TNC concentrates on a different mixture of the power dimensions in providing power. On a whole there is a high level of product differentiation, and therefore a higher level of rivalry. High exit barriers place a high cost on abandoning the product. The firm is forced to compete. High exit barriers cause a firm to remain in an industry, even when the venture is not profitable. A common exit barrier is asset specificity. When a TNC wants to exit the industry, the barriers are low. Far from it! Other competitors or GAs would pay a high price in order to take over the business. That argument leads to a slightly decrease in rivalry. To sum up, rivalry in the TNC industry is relatively high, due to the large number of competitors, scale effects, and high level of product differentiation. There also exists an approach to make rivalry measurable by indicators of industry concentration. One instrument is the Concentration Ratio (further abbreviated as CR). The CR indicates the percent of market share held by the largest (4 - 50) firms within the industry. A high CR means less competition, whereby a low CR indicates a high competitive pressure. The industry is concentrated, when a high volume of market share is held by the (4 - 50) largest firms; then the CR is high. With only a few firms holding a large market share, the competitive landscape is less competitive because it is closer to an oligopoly or to a monopoly. If the industry is characterized by many rivals from whom none of them has a significant market share, we see a low concentration ratio. Fragmented markets are more likely to be highly competitive.

From the introduction: 'Brazil is rich: rich in natural resources, rich in fertile soil, and rich in people". Although the country still shows deficits in different areas, the Brazilian market has attracted large investors and companies especially in the past decade. The country's potential has been the focus of many analysts and researchers by renowned economic institutes. After years of high inflation and slow growth – especially in the eighties and early nineties – Brazil was able to recover and get back into game with the other global players. From a historic perspective it is to say that the country has gone through large transition periods in the last century. Emerging from being a major coffee exporter until the early 20th century, Brazil now belongs to one of the most industrialized countries in Latin America. Although it is the largest country in the region in terms of population figures and geographical size, its GDP share in Latin America or annual growth rate offer a different conclusion. Nevertheless, the consulting market in Brazil has been growing, in particular during the last ten years. Many European and North American consulting companies have invested into the country, built branch offices and bought local firms. Although the market is still very young, its future potential has clearly been discovered. When thinking of Brazil, the words that tend to enter people's minds are positive sounding ones such as Samba, Carneval and beautiful beaches which radiate joy and energy. On the other side issues like criminality, poverty and high social inequality are often associated with Brazil as well. Either way, it is almost certain that one will have heard of Brazil. The country manifested itself in the mind of people and has made front page news more than once. Objective, relevance and research questions: The objective of the thesis is neither to conduct a market evaluation nor to point out the importance and future relevance of Brazil in the world economy. In fact this work is an empirical study on a market entry strategy which can serve as a reference for management consulting companies that want to enter the Brazilian consulting market. Furthermore, the work attempts to deliver a comprehensive picture of this market, with the intention of elaborating on whether it is wise to invest in Brazil, or whether there may be another – more suitable – Latin American country. Yet, the focus lies on the framework for strategy formulation and the proposals that will be made thereupon. In order to accomplish this, both a classical and an empirical approach were chosen whose outcomes will be compared to one another in the last chapter. LEAN Management is a booming term in the consulting business. Everybody wants to learn the 'LEAN-Thinking" and apply the method to his/her own company. Since the late 1990s LEAN Management is experiencing an upward trend and the word has spread all over the globe to reach Brazil. Consequently, there is a growing demand for LEAN in this country, as evidenced by the number of consulting companies already present in the market and the excellent prospects it shows. The aim of the thesis is to propose which geographical regions and economic sectors in Brazil may yield attractive prospects for management consulting companies. The information is then used to formulate a market entry strategy for LEAN Consulting in the Brazilian market. In addition, proposals will be made and future scenarios presented to the reader which are augmented by emprircal findings. Based on the introduction and the objective of the topic – giving a perspective of the situation in Brazil – the following two research questions are being raised. Is the LEAN market in Brazil a suitable market for a LEAN consulting company to invest in? Which recommendations for an entry strategy can be given when entering the Brazilian LEAN market? Out of these research questions, a sub-question is derived. Can Brazil serve as an entry port to Latin America for LEAN consulting businesses? The analysis of these questions will be conducted through a theoretical as well as an empirical approach. Structure of the topic: After having presented the objective and relevance of the topic as well as the research questions, the author will introduce the structure of the thesis. Accordingly, to strengthen the arguments that will be highlighted in the conclusion, the thesis is divided into three parts. The first part consists of theoretical results selected from secondary research. Based on the theory, an empirical study is conducted, involving a group of experts who will elaborate on their personal experiences and opinions with regards to the topic. The empirical findings deduced from the study are compared with the theoretical results in order to verify, if there exist a consensus among theory and empiricism. This comparison is then used to build up the third part of the thesis – the conclusion. Methodology: In order to create a solid basis for the strategy formulation chapters two and three provide a brief overview of the economic situation in Brazil – in a Latin American context – from the earliest settlement in the 14th century until today. Furthermore, an evaluation of the market, its productivity and its growth potential, completes the picture. Recent political changes have brought an upwind into the descending system. Since the implementation of the Real Plan in 1994 the country has experienced low inflation, trade liberalization, substantial privatization, increases in import penetration and the expansion of FDI. Thus, Brazil has reason to hope for future in prosperity. The information drawn for this section consists of secondary research, covering literature as well as various online resources and online libraries, to provide an adequate framework. The literature is primarily in English and partly in German or Portuguese language. The term LEAN Consulting is explained in detail in chapter four, in order to understand the impact and relevance of the term in this context. The literature for this part is provided by a consulting company that is working according to the LEAN principles. It consists entirely of secondary research with books and magazines as main sources. The LEAN Consulting market in Brazil has a special importance for the topic and the sources are given by the same consulting company. After having applied the theoretical framework of the thesis, chapter five provides the framework for the strategy formulation. The basis to this approach is the Five-Forces-Model by Michael E. Porter. Since the topic – market entry strategy – is a rather practical issue, the main part consists of empirical findings deducted from a Delphi Study. It is based on expert interviews that were held with a group of initially nine experts from the consulting business in two stages. In the first stage, these experts were confronted with two questionnaires – consisting of open and closed questions – which they had to answer based on their personal experience and opinion. The questionnaire in the second round was based on the summarized answers of the first one, raising new thoughts to the topic. The questionnaires were submitted in German, since all of the participants were either native German speakers or had sufficient knowledge of the German language to understand the questions. The aim of this Delphi Study was to gain opinions and experiences that can neither be found in books nor in any other relevant literature. Usually, Delphi Studies are used for business forecasting. The author receives new viewpoints that are based on personal experience of the experts by living in Brazil and working in the consulting business during the last decades. The last part of the thesis draws the conclusion, comparing the classical market entry approach to the empirical findings of the Delphi Study. This then gives a profound basis for constructing strategic recommendations and provides a future outlook. It is interesting to see how the experts of the Delphi Study view the future prospect of the consulting business in the country and what should be done to boost economic growth in this area. The thesis concludes by summarizing all important findings under consideration of the background layed out in the first part of the thesis.Inhaltsverzeichnis:Table of Contents: ABSTRACT IN ENGLISH LANGUAGEIII ABSTRACT AUF DEUTSCHIV 1.INTRODUCTION1 1.1OBJECTIVE, RELEVANCE AND RESEARCH QUESTIONS1 1.2STRUCTURE OF THE TOPIC2 1.3METHODOLOGY5 2.ECONOMIC OVERVIEW AND BACKGROUND OF BRAZIL7 2.1MERCOSUR7 2.1.1History8 2.1.2Foundation8 2.1.3Economic role of the Mercosur9 2.2THE COUNTRY BRAZIL10 2.2.1Political and economic history11 2.2.2Economic environment13 2.2.3Political environment14 2.2.4Macroeconomic data15 2.2.5Social inequality17 2.2.6Level of corruption and governance indicators19 3.MARKET EVALUATION22 3.1THE 'THREE-SECTOR-THEORY' OF BRAZIL22 3.2PRODUCTIVITY24 3.3POTENTIAL MARKETS FOR MANAGEMENT CONSULTING COMPANIES25 3.3.1Major Brazilian companies26 3.3.2Strongest regions in Brazil31 3.3.3Most promising branches34 3.4CONCLUSION35 4.LEAN CONSULTING37 4.1DEFINITION AND PHILOSOPHY OF LEAN37 4.2TYPICAL PRACTICES APPLIED39 4.3DIFFERENCES OF LEAN MANAGEMENT TOWARDS OTHER METHODS42 4.4MANAGEMENT CONSULTING COMPANIES IN BRAZIL44 4.4.1LEAN consulting companies in Brazil45 4.4.2The IBCO47 4.5REASONS TO CHOOSE AN EXTERNAL CONSULTANCY47 4.5.1Criteria to choose consulting services48 4.5.2Average consulting fees48 4.6CONCLUSION49 5.MARKET ENTRY STRATEGY51 5.1OVERVIEW OF THE CLASSICAL MARKET ENTRY STRATEGY51 5.1.1Methods for market entry52 5.1.1.1Contractual agreements53 5.1.1.2Sole Venture54 5.1.2Influencing factors for the entry mode decision55 5.1.3Special characteristics of services56 5.2MARKET ENTRY STRATEGY INTO THE LEAN CONSULTING MARKET57 5.2.1Competition57 5.2.2Opportunities and threats62 5.2.3Framework for strategy formulation64 5.2.3.1Business communication65 5.2.3.2Starting the business66 5.2.3.3Employing foreign workers67 5.2.3.4Obtaining a credit69 5.2.3.5Legal constraints70 5.2.4The Delphi Study71 5.2.4.1Reasons to choose the Delphi method73 5.2.4.2Limits to the Delphi method74 5.2.4.3Experts75 5.2.4.4First round76 5.2.4.5Second round78 5.2.4.6Short summary of most important findings81 6.CONCLUSION83 6.1FINAL RESULTS AND RECOMMENDATIONS83 6.2DIRECT COMPARISON OF THEORY AND EMPIRICISM86 6.3FUTURE OUTLOOK88 6.4PROSPECT FOR FURTHER RESEARCH90 7.BIBLIOGRAPHY91 7.1BOOKS91 7.2ARTICLES/PUBLICATIONS92 7.3WEBSOURCES94 7.4FURTHER READING AND EXPERTS97 8.APPENDIX98 8.1DELPHI STUDY - SUMMARY OF FIRST ROUND98 8.2DELPHI STUDY - SUMMARY OF SECOND ROUND101 8.3CONCRETE STEPS FOR STARTING A BUSINESS IN BRAZIL105 8.4PAYING TAXES IN BRAZIL107Textprobe:Text Sample: Chapter 3, Market Evaluation: Today's marketplace is very competitive. In order to successfully place a company or a product in a new market its potential needs to be assessed first. The market evaluation uses information given about the market and helps to determine feasibility of a potential market and the competitive landscape. The aim is to compare different regions and sectors to find the strongest opportunities. This will reveal a strategic roadmap to the market entry. The Brazilian market has an enormous potential and growth is foreseen in the country for the next years. This chapter will provide an overview of the regions and branches in Brazil, pointing out the ones with the highest capability to be the future market for a management consulting company. The industrial sector is the most important one in this country and the focus of the strategy will lie on the branches present in this sector. A market segmentation presenting the biggest companies – measured by revenue – will provide the benchmark for potential growth and allows us to focus on prospective customers. The 'three-sector-theory" of Brazil: According to the 'three-sector-theory", developed by Jean Fourastié, the economy can be categorised into three different sectors of economic activity: the agricultural sector – the primary sector (commodity producing sector), the industry sector – the secondary sector (or goods-producing sector), and the service sector – the tertiary sector (or non-goods producing sector). The aim of this theory was to explain the transition from the agricultural to the industrial society and later on to the post-industrial service society in the 20th century. It is assumed that the three sectors have different opportunities to adapt to technological progress. Through the application of new technical procedures, the productivity in the primary and secondary sector increases while, at the same time, less manpower is needed and also the demand for these goods decreases with increased productivity. The excess manpower and demand, in turn, will be absorbed by the tertiary sector. The problem is that this theory assumes no influence by outside factors and therefore cannot be applied to any economy without precaution. In 2006, the agricultural sector accounted for 36% of the GDP worldwide, the industry sector for 22% and the service sector for 42%. In Brazil the distribution in the same year is considerably different, with the agricultural sector accounting for 5.5%, yielding coffee, soybeans, wheat and rice as the main products. The industry accounts for 28.7%, with its main products being textiles, shoes, chemicals, cement and iron ore. The services sector makes up 65.8% of total output. The GDP growth rate by sector in the years from 1997 to 2007 has been subject to fluctuation especially in the agricultural but also in the industry sector. The service sector has been rather stable during this period. The three-sector-theory is based on the assumption of above-average growth of demand and below-average growing productivity in the tertiary sector. The current situation in Brazil and in the global context shows a strong tertiary sector, followed by the secondary and the primary sector. This supports the three-sector-theory of the shift: agriculture > industry > service sector. Although the service sector is the strongest sector in the economy, both by total GDP and by year-over-year growth rate, it is a non-good producing sector, which makes it uninteresting for a management consulting company as they are concentrating on the industrial sector where production takes place. The theory does not explicitly state the distribution of the different branches among the three sectors. Therefore it can be assumed that some branches that are interesting for the strategy could be assigned to the service sector, although in the following this sector will not be elaborated on. The importance of the industrial sector has been fully recognized by the development studies all over the world. The industrial sector – through its linkages with other sectors – plays a very important role in achieving rapid growth and development. Most modern and rich countries have a well developed industrial sector through their early industrial revolution. It is the most important driver of the economy and apart from the service sector – the non-goods producing industry – it constitutes the biggest sector and generates the largest profit share out of all. During the last years the industrial production in Brazil was subject to many changes due to the slow growth of the economy. The country has set up an agenda to become a competitive economy that is able to provide qualified goods in sufficient quantity and to create a greater number of high skilled jobs. Brazil is on its way to transform into an economy that is included in the knowledge society and recognized as one of the main platforms for the industry worldwide. Productivity: The level of productivity is a crucial part in the context of this thesis. It indicates the general market growth and its potential for the future. Since management consulting companies will focus on the industry it is important to know, if there is a need to enhance productivity. If so, then this need would likely translate into higher investments in this area and a greater demand for support services from the consulting industry. The level of labour productivity is the primary determinant on the nation's GDP per capita growth. Brazil's weak economic growth is due to the relatively slow increase of labour productivity. The latest performance study, conducted by the Conference Board, shows a labour productivity growth rate of 1.9% in 2007. Compared to the other BRIC countries, this is the poorest rate. Russia, India and China showed a much better performance with 6.3%, 6.7% and 9.8%, respectively. This can be ascribed to transitional reallocations of employees by large companies into emerging markets that consequently foster productivity growth in the respective country. Especially India and China play a determining role in this context, since wages in these countries are notably lower than in Brazil and also in Russia, hence companies are more likely to turn to the Asian countries to make new investments that lead to job creation. According to a study on barriers to growth in the Brazilian economy, conducted by McKinsey's São Paulo office in 2005, there are two major root causes that lead to the relatively slower productivity growth. The first one refers to the modest per capita income, which promotes consumption of the lower-priced products and services. An example is the automotive industry, which produces primarily small and inexpensive cars. For the higher-priced vehicle section it relies on imports from other countries. The second cause is related to the first one – labour is cheaper than capital – which inhibits investment in new machinery that, in turn, would improve productivity levels. These barriers, however, will naturally fade once the government is able to resolve the social and economic problems by a policy shift. Labour and tax laws, price controls, product regulations, trade barriers and subsidies, among others, are present obstacles that limit productivity. Also, the unemployment rate, the level of inequality, the state of the educational system, are all factors that influence productivity levels and play a role in the performance studies. Potential markets for management consulting companies: After having identified the target sector and the level of productivity in the country, the next important step to defining a suitable market entry strategy is to determine specific markets in Brazil that yield the best prospects. Three different variables will influence the decision-making. These are the major Brazilian companies, the strongest regions and the most promising branches that are interesting for a management consulting company. Consequently, this will then lead to the establishment of the target branches as well as companies for LEAN business in Brazil and serve as a basis to formulate the entry strategy.

The performance of Senegal's agricultural performance exemplifies the impact of unmanaged risk on productivity among vulnerable smallholder crop producers and pastoralists. The government of Senegal has historically responded to drought and other shocks with direct financial support to farmers as well as general assistance to the rural population. The World Bank, with support from the group of eight (G-8) and the United States Agency for International Development (USAID) and in collaboration with the Ministry of Agriculture and Rural Equipment (MARE), commissioned the present study. The objective of this assessment was to assist the government of Senegal to: (1) identify, analyze, quantify, and prioritize principal risks facing the agricultural sector; (2) analyze the impact of these risks; and (3) identify and prioritize appropriate risk management interventions that may contribute to improved stability, reduced vulnerability, and increased resilience of agricultural supply chains in Senegal. This report presents a summary of the assessment's key findings. Chapter one gives introduction. Chapter two provides an overview of the agricultural sector in Senegal and a discussion of key growth constraints. An assessment of the main agricultural risks is presented in chapter three. Chapter four analyzes the frequency and severity of highlighted risks and assesses their impact. Chapter five presents some stakeholder perceptions of risks and evaluates levels of vulnerability among various livelihood groups. The study concludes in chapter six with an assessment of priorities for risk management and a broad discussion of possible risk management measures that can help to strengthen the resiliency of agricultural supply chains and the livelihoods they support.

Transcript of an oral history interview with Harold L. Gilmore, conducted by Joseph Cates on 22 January 2017 as part of the Norwich Voices oral history project of the Sullivan Museum and History Center. Harold Gilmore was a member of the Norwich University Class of 1953; his experiences as a student at Norwich University and his post-graduation career path, particularly as an educator, are discussed in his interview. ; 1 Harold Gilmore, Oral History Interview January 22nd, 2017 Home of Harold Gilmore Interviewed by Joseph Cates JOSEPH CATES: Let's record and we can get started. HAROLD GILMORE: All right. Very good. JC: All right. This is Joseph Cates. Today is January 22nd, 2017. I'm interviewing Harold Gilmore at his home. This interview is sponsored by the Sullivan Museum and History Center and is part of the Norwich Voices Oral History Project. To start off, can you tell me your full name? HG: Harold Lawrence Gilmore. JC: And, when and where were you born? HG: Born in Whitinsville, Massachusetts in 1931. JC: Okay. HG: April 30th. JC: April 30th. What is your Norwich class? HG: Class of 1953. JC: Okay. Tell me about where you grew up and what it was like as a child? HG: I grew up in a very unique town. The town of Whitinsville, a village of Whitinsville, in the town of Northbridge, Massachusetts. It was what you'd call a company town. It was a town that was operated fundamentally by the Whitin Machine Works, which was a textile manufacturing company. My father worked there his whole life. My mother worked there part-time at times. It was a town that was written up by the Harvard Business School at one point in time as sort of a socialistic environment. JC: Oh! HG: It was a town that ran the library. It had its own housing for its people. The rents were subsidized so to speak. They maintained those properties. So, it was a very unique environment, something that probably not many people in the United States have ever lived in but was very enjoyable. It was secure and stable 2 employment, good schools. Other resources were all well-made, fire departments, police departments, many of it subsidized heavily by the corporation. JC: And what corporation was it again? HG: Whitin Machine Works. JC: Oh. Okay. HG: And it was a textile manufacturing company. JC: Oh. Okay. HG: Subsequently, it has disappeared. Went out of business. Textile manufacturing moved elsewhere. Moves down South and then out of the country primarily. The remnants of it are over in New Bedford where I ended up retiring from the University of Massachusetts over there where the icon on the entrance of the school is a huge spindle, which is a representative of a device that runs a thread through looms, weaving machines. JC: What made you decide to choose Norwich? HG: Well, I was the first individual in my family to go on to college. It's a large family. My mother was one of eight children. My father was one of four. They married. They lived within, almost a stone's throw of each other. We lived in the same place. I grew up in the same place and had many aunts and uncles in the neighborhood. So, I did not have any prior experience with Norwich. The only thing that was driving me at the time was my father said, "You've got to get a college education." He was a wood pattern maker and worked at Whitin Machine Works, as I noted, and he said, "This is not your lifestyle. You've got to upgrade yourself." I did not have the experience that current people have of visiting campuses. I never went to Norwich. I had an uncle that had gone to the University of Rhode Island. He had not graduated. So, I applied there. And then, Norwich had a high school visit team that came through and I got impressed with what that fellow had to say so I applied to Norwich. I did not get accepted to the University of Rhode Island. So, I had the choice of one school, Norwich. So, I went to Norwich. Unbeknownst to me about anything about Norwich. As a matter of fact, I had my high school yearbook signed by one of the teachers and he signed it, "Hup, one, two, three" and he signed his name. I said, "What's that all about?" He says, "You're going to a military school! You're going to be in the Army!" I says, "I am?" When I arrived at Norwich, it was like a new day in my life. I had no military experience. I'd never even been a Boy Scout. The regimentation was totally new to me. That probably was the beginning of what I consider a rather difficult period of adjustment for the four years. As you will probably know, I was a private in the Corps for four years. 3 JC: Oh. Okay. HG: Never given rank. I had the one opportunity close to graduation, which I refused. I thought it was a token gift which I did not appreciate receiving at that point in time. I didn't accept it. In fact, I applied to transfer out of Norwich my freshman year to start college at Georgia Tech. I got accepted to Georgia Tech, got a telephone call from my mother saying, "What is this acceptance notice we've received from Georgia Tech?" I said, "Well, I'm going to Georgia Tech next year, Ma. I'm not going to Norwich." She says, "Very well. Pay your own way." I stayed at Norwich for the rest of my life because I had no money at all! JC: What was it like that first day showing up at Norwich? HG: Well, it was a very memorable day. My father and mother drove me to school with the necessary material that I had to have, clothing and I think we had to bring a mattress at the time. We arrived at Norwich in the morning. My father and mother dropped me off, dropped me off at Cabot Hall. Room 109 was my room. My roommate, Ron Bartlett, at the time, had arrived about the same time so I met his father and mother. We met each other, of course. My father, immediately after dropping me off, jumped in the car and drove back to Whitinsville. They had to get home before dark I think. We started out very early in the morning. In fact, had to turn back because he discovered on the way that we probably didn't have enough gas to make it all the way to Vermont. We went back to get an open gas station because we started out so early in the morning. But no, they dropped me off and left. I remember a conversation I had with Ron's mother and father and she said, "Would you take care of Ron? He hasn't been away from home before." I said, "Yes, I will, Mrs. Bartlett, but neither have I been away from home before." (Laughs.) That was an interesting first day. And then, in contrast to the first day my second year, where I arrived on campus and used to ship a lot of my stuff up in a big, overseas container by train so that my shipment had arrived at the mailroom on campus. I went to the dormitory and I was back in Cabot the second year too. I said, "Rooks! Rooks! I need a rook to go down and get my suitcase and bring it up to the room." "Sorry, Sir. We don't do that anymore." JC: Oh! HG: The harassment rules had changed over the summertime and I hadn't gotten word of it. Plus, I arrived too late, I guess, because I recall having to do that very same thing for upperclassmen that first year. JC: Mm hmm. HG: So, anyway, that was my first day at Norwich. JC: What was your major? 4 HG Electrical engineering. JC: And why'd you choose that? HG: Well, my uncle was sort of involved with the electrical work and not that he had a great influence on me but I observed that and I thought, "Well." He was working for General Electric at the time and I said, "Well, I think that maybe I would do the same thing." So, I sort of went into that field not for any other particular reason than he was successful in what he was doing and I thought it would be of interest to me. JC: Okay. HG: Fortunately for me, in the long run, there were only nine matriculated double Es in '49, which got depleted very quickly, either through people who didn't continue at Norwich or transferred to some other major. I graduated with one other very close friend of mine to this day, Al Gardner, who lives out in the southern part of Vermont on the western edge of Massachusetts. We were the two electrical engineers that graduated in '53. We had tutorials. It was a very fortunate thing for me because probably the school where I had to fend more for myself, I might not have done as well as I did in the curriculum. It was a good experience. JC: Which fraternity did you belong to? HG: I joined Lambda Chi Alpha, which is off-campus, up on the hill. My primary reason for joining them was at the pledge period, you were entertained at the fraternities. They had an excellent meal. At that time, they had a pastry chef with some sort of recognition and he put on a beautiful dessert and I was a fellow who had been plump my whole life, loved sweets, and said, "This is the place for me!" Joined the fraternity and wouldn't you know it, he terminated. He quit. The pastry guy was gone! But we still had good cooks, husband and wife team over the four years, and I ended up being steward of the fraternity. It was a large part of my college life was being in the fraternity. I had to be there at least every day, serving a meal, because I was in the kitchen. In fact, I got rewarded for doing that type of job with half my food bill was being paid by labor so that worked out very nicely for me. JC: Well, what else do you remember about being in the fraternity? HG: Great social environment. I thought that we had, as any organization you end up with some cliques and I had three or four fellows that I chummed closely with and carried on to this day until both of them have now deceased. We had a life-long bonding there so the fraternity life to me was probably my sole social environment on the campus other than some of the things I did with the intramural sports and whatnot. I really was sorry to see the fraternities go but I understood the reason for it and, of course, I was long out of the school at that time anyway 5 so I didn't react one way or the other. It was just a little bit of self-disappointment in the whole thing. I've kept my affiliation with Lambda Chi Alpha for over the years. I still am a donor to the fraternity. I've had representatives from Indiana come up and visit me at the house here asking me for more money. The Lambda Chi, at the time, had sort of reputation of being an academically-oriented fraternity and scholarly environment. Probably didn't pan out as scholarly as I had thought it would but I think the fraternity still holds to that sort of criteria. They like to have their fraternities be scholastically oriented, not just a place to go and drink beer or mess around with the ladies, you know. JC: Right. HG: So, yeah. I heard there might rumors that the fraternities with the civilian population at Norwich might come back. JC: Really? HG: Yeah. I heard a rumor about that but just a rumor. I'm sure that it'd be a hard sell to get them back on campus. JC: Yeah. I know Theta Chi would like to be back. HG: Theta Chi was the Alpha Chapter so, and Lambda Chi, we were the Zeta Chapter, the Zeta Chapter of Lambda Chi so we were not new in the world of fraternities as Theta Chi was. JC: What intramural sports did you play? HG: I got involved in softball, a little bit of tag football and basketball. As I recall, I managed, I guess you'd say, our company basketball team for a while, not that I was any expert in the sport itself but I knew enough about it to try to get the boys organized and spur them on at the games with the other companies. I was in Company B, I think, most of the time. We did okay but it gave you something to do as well as sit in your room and study, that sort of thing. Then, I was on the rifle team for a while. JC: Oh. Okay. HG: When I discovered that my scores were not counted because they have a system of counting only the top five or six scorers and I was always one or two below. I figured I never was good enough. I shot for the team and I gave it up. Tom Atwood, a classmate of mine, was an Olympic sharp shooter so he's – JC: Oh. Really? 6 HG: Oh, yeah. Tom was on the team and he spent a lot of time during his days in the military doing just that, representing the United States on the Olympic rifle team. Tom and I keep in touch to this day. JC: Okay. HG: Yep. JC: He would be a good one to interview. HG: Yeah. Tom is down in Florida in the winter and out in the Chicago area, I think, in the summer. JC: Okay. HG: They know, the school, where he's located. So, if you want to hook up with him, it'd be nice to get him because he was a cadet colonel too, I believe. JC: Oh. Okay. HG: I think Tom was. I know he was high rank in our corp. Getting old here. I forget some of the facts. JC: I understand. Besides intramural sports, what other activities did you participate in? HG: Oh. Let's see. University activities, you mean? JC: Mm hmm. HG: I don't think I, I didn't get involved in any of the other, oh, the IEEE, they had a professional chapter, student chapter. I was involved in that and became an officer in it. Of course, there weren't too many electrical engineers but we did have some younger grads, classmates coming in to it. We did field trips for that. And I was involved with the administration of it, so to speak. But that was probably it, the IEEE. JC: What does IEEE stand for? HG: Institute of Electrical and Electronic Engineers. JC: Oh. Okay. HG: Yeah. It's still an ongoing organization. I still belong to them. I'm a life member in that organization now, because of my age primarily and being a member for so many years. But yeah, it was a good organization. 7 JC: What'd you do to relax when you were at Norwich? HG: Sleep! (Laughs.) We would go to the movies. Go to Montpelier. Perhaps go out to eat in Barre maybe once a week. One of the difficulties of my being a student at Norwich was I didn't have any money and I didn't have a car. So, I was dependent upon a very tight budget and it didn't loosen up at all until I became a junior and senior where we were getting the ROTC ninety cents a day supplement, twenty-seven dollars a month. That helped a lot for spending money. My mother used to say, "The only time you call home, Harold, is when you want money. We don't have any to give you." So, I used to spread my money pretty thinly. So, I didn't do a lot of relaxing that cost anything. There is an incident. One time, Garry Moushegian, Al Gardner, my buddy, the electrical engineer, and I decided to go horseback riding and thought that'd be nice Saturday afternoon entertainment. So, we went out and, funny thing, we rented the horses and got saddled up, got on the horses, and started our trip. Well, none of us knew how to ride a horse. None of us had been on a horse before. The horses turned around and went back to the barn. Garry's a tall guy. Well, the barn door was so low, he got scraped off the saddle. Laughs. Finally, we get them back outside and get them on the way. We did our tour and we're coming back home and, of course, the horses wanted to get back in the barn again. So, they started trotted along and we're bumping along behind them in the saddles and so forth. We got back to Norwich and Garry came over to my room. He says, "Look at what happened!" It wore holes in his underwear! Laughs. So, we had some laughs, you know. Different things like that happened. That's the biggest recollection I can of the things that we did. We had fraternity parties. We had to get involved in that, preparing for them and that kind of thing was an activity that I did as extracurricular. JC: Did you do anything else for entertainment other than what you mentioned? HG: Not that I can think of. I wasn't in any outside of the school activities. I did join the Masonic Order when I was a senior. I joined that and that involves some off-campus activity. I got involved in the Northfield Church. Even as a freshman, I would walk down to church. So, I got involved in church activities. And to this day, I support the Christian Fellowship Organization financially on campus each year to help them along so they can have programs that they want to put on. They have a little bit of money to work with. JC: Right. HG: So, yeah, that sort of thing I got involved in. JC: Okay. Do you remember any particular songs from when you were at Norwich? HG: Well, there's "Norwich Forever," of course, the school song. There used to be a song we used to sing, "On the steps of Jackman, crying like hell! There's a 8 newborn baby. La da da." Laughs. That song we used to sing. The other words they escape me and they don't escape me. They better escape me. They were choice words. JC: I understand. I know the words too. HG: Do you know the words!? Laughs. No. That's about all I remember. JC: I've got it in an oral history, "The Indecipherable Song." HG: Have you really? JC: Mm hmm. HG: I'll have to read that because I'd like to find out what the rest of the song is. It's something like, "A bastard's son of old NU." Awful song. JC: Yeah. It's an awful song. Any other songs? HG: I don't think so. Not that I can remember. JC: Who were the instructors who were most influential during your time there? HG: Well, the electrical department certainly was. Professor Marsh and Professor Maxfield and Professor Spencer, those three. There's an F.A. Spencer award in electrical engineering on campus, I believe. And I have contributed financially to that several times. I don't necessarily do it every year. Those gentleman were very influential. They were almost like tutors to Al and I. We'd be in class. It was just the two of us. You got to know the people and they got to know us. That was a very unique college relationship, I think, that we had. JC: Mm hmm. What was your favorite class? HG: My favorite class? I don't know what that would have been. I know my most unfavorable class was. JC: What was that? HG: Thermodynamics! I flunked that one. I had to take that as a, in order to graduate, I had to pass that course my final semester. So, I was taking an overload. I like Public Speaking. That was an interesting class. I did that the freshman year. I recall we all had to give a talk and I think the fellow's name was Fisk that was the professor. After I got through, I was critiqued, of course, by the student population, including classmates and they criticized me for having my Boston accent. Fortunately, for me, Professor Fisk was from Braintree, I believe. He says, "Mr. Gilmore is going to be fine with his language. I understood him perfectly." 9 Laughs. So, that was a favorable thing out of that class. I remember that so I'd call it a favorite class. I enjoyed it. JC: What do you remember about being a rook? HG: The harassment. A lot of harassment and the fact that we had these duties to perform like opening of windows and preparing the latrines and shining upperclassmen's brass and shoes and that sort of thing. As a person unfamiliar with that, having been the oldest in a family of four, and the only male in that family, I was fairly independent and having to be subjugated to these requirements was demanding in terms of my having to conform to the practices that were being expected of me. That was the worst part that I knew of. Probably another thing would be being out where I was without an automobile. I grew up, as I say, in Whitinsville where I lived out of town about three miles. So, I was used to being in a remote area but I could drive. My folks had a car they would let me use and I could get into town fairly easily and, once there, there was always other transportation you could get as well. At Northfield, there was just absolutely nothing and the closest town was Montpelier, twelve miles away. And also, getting back and forth to school, my folks did not have the resources, the time, or the ability to bring me back and forth to school. There were no commercial transportation convenient. The only way I could get back would be to get a ride from somebody else. And so, that was always at the top of your mind. When you come home, how am I going to get to school? How was I going to get to summer camp, which was down in Georgia? I had no car. I didn't have an automobile until I had started, after graduation, when I started working for Westinghouse, without a car. I had to save up enough money for a down payment to buy one. So, my first few months at work were devoted to saving as much money as I received from my Westinghouse pay to build up enough money to make a down payment on a car, which I finally did. I bought a used car in Whitinsville. I remember it cost $1350. It was a 1949 two-door Ford sedan. I ended up taking it to Japan with me and selling it off over there. Didn't bring it back. Yeah. So, those were the hard parts of school at Norwich. You know, I can recall when I'd get back from Norwich from a vacation, it be in the evening, you'd see the lights up on the hill and I would breathe a sigh of relief, "I'm back home and I'll be safe here when I get home." It ended up sort of like a security blanket. The school prepared me for, it gave me the keys to success. I'm forever pleased and blessed that I ended up going and staying at Norwich actually. It's created a great deal of enjoyment for me over my life. I've had a great post-graduate career and one of the things it taught me was perseverance, life-long education. I wasn't necessarily a brilliant scholar but I ended up getting three master's degrees and a Ph.D. post-Norwich experience and I think Norwich had to have something to do with that motivation to do that. JC: What are your master's degrees in? 10 HG: I have a master's degree, an M.B.A., and I have a master of science and a master of arts, one in human resources and one in labor relations. JC: Okay and where are they from? HG: One is from Shippensburg and one is from Loretto. That's awful. Can you give me a minute? JC: Yes. HG: I have a B.S.E.E. from Norwich, and M.B.A., a Ph.D. from Syracuse, a master's degree from St. Francis College, and a master's degree from Shippensburg University. JC: Okay. HG: The most important degrees for me, of course, was the B.S. in E.E. and the M.B.A. Ph.D. from Syracuse because those influenced what I did with my life more importantly. The other two degrees were done because of what I felt I needed to be effective in the classroom that I subsequently taught and administered the programs in at both Penn State and at UMASS Dartmouth. JC: Oh. Okay. Let's see. What was your favorite part of Norwich? HG: Favorite what? Part? JC: Part. HG: Part of Norwich? JC: Mm hmm. HG: What do you mean by part? JC: What did you like most about it? HG: Well, I would like the day I graduated was the most favorite part for me. I had my entire family there, extended family. We rented a whole motel. I was the keystone person that ever graduated in Johnson and Gilmore family. As I mentioned, the size is extensive and I remember quite a few relatives to follow, cousins and so forth. That was an occasion that I really, it was a success for me because I went there thinking, "I've got to graduate. I cannot fail." And I hadn't even though that last semester I had to take that extra course to make it through. I did it. And then the fact that it prepared me. I left the place with a job. I had a commission. I got a deferment for ten months so I could go to work for Westinghouse and get some industrial experience before I went in the military. Stayed in the military for my, 11 well I went in for two years but I extended because I got special weapons training with atomic weapons and I was there for close to three years total. Could have stayed longer. I was asked to stay longer but for family purposes I, stayed in the Reserve though. I retired from the military and I made it well up to the rank of colonel which I felt was something I never expected either and I think Norwich prepared me for that sort of experience, knowing how to behave and accept responsibility and perform the duties that I was required up to a successful level, satisfactory level. So, the best day at Norwich was indeed the day I graduated because it marked a major milestone in my life. Just as the first day I went there marked a major milestone. JC: What was the most important thing that Norwich taught you? HG: I think to be respectful of others and to take life-long learning seriously and to be persevering in what you're trying to accomplish. Norwich's motto is "I Will Try." So, any opportunity that came along for me, I seized upon. I was outwardly looking, several Fulbrights, quite a bit of overseas experience, along with my family, and I think Norwich prepared me for that by having an overseas assignment that was one of my first, the only one I had as a lieutenant was in Japan. And I got to like other cultures and so forth. I pursued that in Africa, Europe, and other places. As a matter of fact, I was contemplating a trip to China this year. JC: Oh. Really? HG: Yeah. I think I may go to China. I got the quotation and everything. One of the things I have to clarify is that both my wife and I's status health-wise to make sure that we're fit to go. I think we both will be allowed to do that from a medical perspective. The only thing remaining is making the commitment. JC: Mm hmm. HG: So, yeah. We're looking forward to that. We've gone on a number of cruises in the meantime to Alaska, the Mediterranean, the Caribbean, Alaska. So, we engaged travel, so I think the military and the Norwich environment has cultivated that sort of orientation to our lifestyle. JC: You mentioned "I Will Try." What did it mean to you as a student? HG: What did it mean to me when? JC: As a student. HG: As a student? Probably not much. I don't think you really appreciate that. I appreciate it more now that I've graduated and look back on things. I think, one of the things, it's not "I Will Try" so much but "I Will Stick to It!" 12 JC: Mm hmm. HG: I will not quit! I was amazed at the number of freshman, matriculated freshman that left Norwich the day they had to get a short haircut. JC: Mm hmm. HG: I, fortunately, grew up every summer having my head sheared off with what we used to call a Harvard clip. So, it didn't bother me to have to have it cut another eighth of an inch off. But these fellows that came up with the golden curls that had to get sheared said no and left. I wasn't going to give up. If Norwich's moral had been "I Won't Give Up," it would have been more appropriate than "I Will Try" in my case. "I Will Not Give Up." JC: What does Partridge's idea of a citizen soldier mean to you? HG: Well, it means to me that I'd like to see conscription come back. That's how much meaning it has to me. I think everyone should have a requirement to do some public service of some sort, not necessarily military but some kind of public service to build a concept of patriotism and to embed the value systems that our country stands for in their lives, personal lives. And so, the citizen soldier concept, I thought that Partridge had was just that. A person has a responsibility for his country, his family, and the two can coexist. JC: Mm hmm. HG: So, that's what that means to me, to be part of the process as an individual. JC: Mm hmm. Do you remember any funny stories from when you were at Norwich? HG: I'm sure Fred told you a funny story, the time I came up and down on the dumbwaiter at his surprise. He wondered, "Where was Harry?" And I said, "Here I am!" And I was inside the dumbwaiter cage! Laughs. That was a comedy. The other thing was the, not so much of a story but incident, was the time I repeated earlier about the horseback riding incident. That was a humorous event. I don't recall any other thing comes to mind at the moment. I'm sure there probably were numerous other events that happened that created some humor but I don't recall any right now. JC: So, what did you do after graduation? I know you went to work at Westinghouse. HG: Yeah. I went to work for Westinghouse immediately upon graduation. Had a job before I graduated. And then, I took a deferment from, Westinghouse gave me a deferment for about ten months because I did have the two-year obligation as a commissioned officer. So, then I went in the military and got asked if I were 13 interested in taking a special weapons training. That's the atomic weapons training. I got a Q clearance and so forth. And I went to Sandia Base. While there, a unit, 261st ordinance detachment was formed. I became the first commanding officer for, until such time as the captain showed up to take over the reins. I was in individual training. Didn't finish that. Went in to unit training, the 261st trained with the 5th field artillery battalion for deployment to Japan which, incidentally, at that time was against the peace treaty that we had signed with Japan. We're not supposed to bring any new armament into the country but we did. We brought in nuclear weapons. We used to have a little difficulty, the artillery did, going out to the range and firing it off. I went there and did some field exercises in Iwo Jima in Okinawa. While there, got to talking to a gentleman at KU Ammunition Depot Bar one evening and he was leaving for Syracuse University for the comptrollers' program there. And he says, "Harold, you ought to think about getting your M.B.A." And I said, "Well, what's that?" He says, "It's a master's degree in business administration. It's a great topping off of your electrical engineering degree and it's highly sought after people." Now, this was back in 1957, '57, '58. So, I put in for an early release. It was like eight months early. They weren't going to let me go until I got some congressional involvement by Saltonstall and he facilitated my departure from the military. I didn't give up my commission. I just went in the Reserve. And so, I went to Syracuse at that time. Got my master's degree. Went back to work for Westinghouse. Worked for AVCO in the reentry vehicle business, the Apollo program. And from there, I decided to go on to Syracuse. I got a three-year fellowship for a Ph.D. program in organizational behavior and operations management. So, I took that, went there, gave up my work, sold my home, took my family to Syracuse. Again, very, in retrospect, very risky situation. A lot of people start out looking for a Ph.D. and they never get it. I was told when I arrived, I had a very good advisor, a fellow who I had as an M.B.A. faculty member, Dr. Seimer. He said, "Harold, you do not leave this campus without that Ph.D. because you'll never get it if you do." So, I says, "All right, Dr. Seimer. I will not leave." So, I stayed there and I got the doctorate and left them. In my first job, I was planning to go back to work for AVCO because I was in a research and development division where higher degree were, of course, very prominent. JC: Mm hmm. HG: Well, and they had said, "Well, maybe there might be an opening for you when you get through." Well, three years is a long time and everybody changed chairs there. There didn't seem to be anything open for me so I took a job with the University of North Dakota at Minot Air Force Base in the Air Force Institute of Technology program. The AFIT program. We transferred their master of engineering degree to an M.B.A. degree while I was there and I was there for a couple of years. And from there, I transferred to Penn State University and I was at the Middletown campus. My office overlooked Three Mile Island. I was there for sixteen years, I believe. I did teach up at State College one semester. Then, for family reasons, I left Penn State. I was tenured and everything but I left Penn 14 State and came to UMASS Dartmouth here for family reasons, health reasons. And I did ten years over here. At that point in time, I retired from UMASS but, in the meantime, had picked up some work for the University of South Pacific at Fiji. So, I worked off and on during a five-year period in the year 2000 over there. JC: Okay. HG: Currently, I am volunteering at the National Graduate School of Quality Management here in Falmouth, which is an online type program. I am the director of the alumni program, which they've never had before. So, it's an experiment and it may be a futile activity but I'm giving it the best go I can give it as a Norwich guy. I'm not alumni but I'm their director. I'm modelling it after the Norwich Alumni Association. As a matter of fact, I used Norwich's bylaws in modifying to try to make them fit this school's program. So, that's where I am to this moment and I don't know how much longer that'll last. I've been doing it for a couple years now and probably give it another, 2017 may be my last year of doing that. Depends upon what my success is this year. JC: Well, you've had a lot of schooling. How did your training at Norwich prepare you for life, specifically? HG: Very well. Very well. In retrospect, I wouldn't have it any other way. It taught me to roll with the punches. You can't have everything your way all the time. To get along, you've got to go along and cooperate and you graduate. I think, probably, the teamwork idea was imbedded, not so much in a pointed way but in an overall way of existing and finishing up your, what you started. We had to work with other people. I started out as an individual and I think I came out as a person who understood that to get along in this world, you're going to have to work with other people and depend upon other people. Now, I probably, even to this day, I'm a volunteer and I know that I have, I have no resources. I have no budget. I don't have even office space, so to speak, except out of the house. Working with some adult people over here and I know that I depend upon them for everything I get done and I acknowledge that very, very fully to the best extent I can. Because I know that their cooperation, my success depends upon them. Without them, I'll die on the vine. I think Norwich has taught me that concept. Oh! I think I didn't mention to you. You probably were aware of this. I created, for the bicentennial, a puzzle. JC: Yes! You did. HG: You're aware of that? So, I put that together. JC: Mm hmm. 15 HG: And, you know, the thing is, the way that transpired, nobody seemed to want me to do it. Sometimes, that rubs me the wrong way. So, I says, "I don't care if you don't want me to do it. I'm going to do it anyway!" JC: Yeah. HG: So, I did it and quite amazed at how it turned out! There's a gentleman next door who's a graphic artist and he's good on the computer. That's what he does for a living. I got the university photographer, they let me access the photographs. I picked and chose some photographs, brought them over to Sean. I said, "Sean, what can you do for me?" He says, "Let me see those." So, we looked. He says, "I'll have something for you tomorrow." He brought over the thing. "What do you think of that?" Well, we made some adjustments and so forth. My wife has a friend who does puzzles and she brought over to our house a wooden puzzle that she had bought for the Lilly family, the big drug people here in Falmouth, a lot of property and donor, a very big benefactor. I said, "Maybe we could have a wooden puzzle for what I've created for Norwich." So, I contacted a guy in Connecticut and he says, "Yeah. If you're willing to pay the price, I can make that for you. No problem." So, I says, "Okay. Let's go with that." I've even gone down there and I've even worked the puzzle thing myself. My wife and I watched him make, it's an example of his work. Got that done. Made a contact overseas. Got somebody to stamp out those puzzles. I bought four dozen of them. Gave them to the school and said, "Use them at will." Then, I gave Sullivan, no, I gave Schneider a wooden one and I think he turned it over to the, the wooden one I gave him because I didn't want it. What was it going to do with me? So, I gave to him and he put it in the museum, I think. JC: It's at the museum. HG: It was a labor of love. That's all. I just did it because I didn't find the support that I thought I might have gotten from the bicentennial committee but they had bigger items on their agenda. This was not going to fit into the program, I guess. And then, I was involved, at one time, with a committee on postage stamps and I had done a lot of work and I was really disappointed. I got mixed messages from U.S. Postal Service as to whether the images that I submitted weren't, "They're fine. We're going to submit them for postmaster consideration." Then, I get a message from somebody else on the committee saying, "No. We're not." And you can't reach anybody on that committee because they're, you just don't have any contact information for them except maybe names. But now I understand that they did release, or rerelease of the Alden Partridge stamp for the ROTC commemorative. They said that now Schneider's got himself behind the request for a Norwich postcard set which is what they usually do. I think if they don't do something for Norwich for the bicentennial, there's got to be something wrong in Washington. I hope they follow through. I sort of dropped out of the picture because it's now gone beyond my involvement. But I filed all the paperwork and everything else necessary for that. Hopefully, we'll see something come to pass. 16 JC: Hopefully so. HG: Yeah. I was told that one the things, they said, "Well, you've got to get the postmaster in Northfield involved. And I said, "Well, I'm not in a position to do that. You're right there in town." The bicentennial committee itself could just go to the postmaster and say, "We want to issue the stamp." And if he supports it, I guess, or postcards, they don't, the stamps are a little more dicey to get through. But the postcards are pretty easy to do, I guess. So, maybe, we'll see what happens. I don't know. I've lost touch with that group. The last I heard was that they upgraded the applications or something by getting Schneider's support and some other people supporting it too. That'll be good. JC: Yeah. Hopefully, that'll work out. HG: Yeah. JC: Well, that's about your involvement with Norwich. HG: Mm hmm. JC: How do you think your professional life would have been different had you not been a Norwich graduate? HG: Oh, dear. Tremendously different because Norwich set me on a military career. It set me up for a military lifestyle, in a way, although I didn't go there with that idea at all nor did I graduate with that but it just sort of grew on you. I can recall, being a reservist, I would say, "Well, maybe I'll just stop going. I'll just give up." One year led to another year and before I knew it I had thirty years and six months and I was boarded out. I got considered for general officer and I didn't make it. I understood why. My competitor, I knew who that person was and a lot of stuff on his chest that I, ribbons on his chest that I didn't have and I figured he was more entitled to it or earned it more than I did. He had combat time. I didn't have any combat time at all. I was in a war zone, Korean War, but that was over practically. So, I think Norwich set me up for that whole aspect of my life. The academic part of it came about, my industrial area was focused on my engineering experience and math and science and so forth. And then, my academic life, all the way from doing some consulting work and so forth and having the idea of a continuous learning environment. I just kept on going to school, both militarily and civilian-wise. I took many, many a correspondence program. I went to Fort Leavenworth to the Command and General Staff School. I taught Command and General Staff School. I taught at the Army War College in Carlisle, both as a military faculty member and as an academic Penn State, because we had a program with them. JC: Right. 17 HG: You know, I'm amazed at the kinds of things I got involved in and I attribute it all to Norwich. If I had gone to URI like I wanted to heavens knows what I would have become, if I ever graduated. Or if I'd gone on to Georgia Tech, I might have failed out! Who knows? Norwich kept me going. I did hit the dean's list a couple times while at Norwich but I was no stellar student. Sullivan and I share one common thread. We both were privates for four years. JC: Yep. HG: And, you know, I'm not proud of that but we survived. He did very well militarily, obviously. Much better than I did! He got, what, four stars. I got the eagle but, nevertheless, I think that Norwich did us both very well. JC: I think so too. Has being a Norwich graduate opened doors for you that might not have been opened otherwise? HG: I thought, militarily, yes. Yeah. I can clearly recall early on in my career, when I was living up in North Andover. I was in the Reserve unit in Boston. The fellow that was in command of that unit, he loved Norwich guys. So, I got signed to his unit. Having somebody who was favorably disposed to where you're from certainly is helpful in the image that you are going to create if you live up to the person's perception of the school. JC: Right. HG: And I did very well. So, I think that opened me up for captain and major level of consideration. From then on, it was, an interesting little thing was when I worked for Penn State, I had a student by the name of Emmett Page. He was one of the Army War College students that were taking the master's program at Penn State. I was a faculty member, teaching him a course and I was over at the graduate program over there, teaching in their program, the military. Came time for me to have an assignment, as a colonel. Guess who I ended up being assigned to? JC: Emmett Page? HG: General Page. Laughs. He was in charge of the electronic research and development command in Adelphi, Maryland. I was his assistant. JC: Oh. Wow. HG: So, I got an assistant commander position with him as a colonel. I'd go down there and he'd say, "Harold," because I was in quality, he says, "I got some contracts out there. I want you to go to these contractors and see what they're doing and jack them up if they need jacking up." Laughs.) I had a great relationship with Emmett. I followed up with him a little bit afterwards. He was 18 my former student, was now my boss. I was grading him and now he was grading me! It's a small world. JC: Yes. It is! HG: Another interesting situation too was, we're in Japan, my wife and I together, concurrent travel. We'd had a major social event in Tokyo. I don't know what level it was, battalion, it wasn't a battalion party. It had to be higher up than that, maybe a Sullivan Theater type thing. Anyway, we went to it and who do we run in to? Colonel Burkle. Burkle was on campus at the time and his greeting to me and my wife when we got together, "Lieutenant Gilmore, your brass is shiny." Laughs. I says, "You can thank Mrs. Gilmore for that." See, most of my fun happened after I got out of Norwich. Yeah, Colonel Burkle. I think he was a colonel at the time. "Your brass is shiny." I said, "Yep. Thank Mrs. Gilmore for that." Oh, dear. I could go on and on and on, I guess. Been a long time. JC: Mm hmm. Do you think Norwich graduates have a special bond that other people don't? HG: Oh! Definitely! Definitely! Oh, yes. I see it in my children who graduated from Penn State. There's nothing like, these online programs, there's no bonding at all! JC: Right. HG: It's like dealing with particles in the air, dust particles, but Norwich, that experience there puts you into close proximity with other people. It served me so well. Al Gardner, I talked with on the phone all the time. Up until Garry Moushegian's demise, he died up in Norwood, MA, with him all the time. Fred Maier, Jack Gillis passed away. My roommate, Bartlett, Jack Gillis, Garry Mousehegian, they all died within a matter of months of each other. I lost all my, so now there's just Fred left and Al Gardner. So, I've got two very close friends. Other people I know but not quite as, as I said, we socially went everywhere with each other, cruises and all that stuff, you know. Families knew each other. Kids knew each other and stuff of that nature. So, yes. Norwich does create a separate, a special relationship, I think, amongst us graduates. JC: Mm hmm. Um, let me see. We've already answered that question. HG: Mm hmm. JC: Um, you've just answered that question. What advice would you give a rook about how to survive and thrive at Norwich? HG: Go with the flow. Join the program full heartedly. Don't fight it. Join it. And see what you can do to excel in it. 19 JC: Mm hmm. HG: I probably chose, I wouldn't say the opposite path but I resisted. I resisted the program and suffered for it, without getting any rank and you don't get ahead in the world that way. You're going to participate in the program and probably if you can't do that full heartedly, you might do better elsewhere. It's not a place for everybody, the military part of it anyway, the Corp. Now that Norwich has a civilian component, you know, Norwich is a nice school and it's a nice environment and Vermont's a pleasant place to enjoy the winter months and so forth. Can't complain about the environment. If you like a rural environment, it's fine. And I grew up in a rural environment so I didn't really rail at that sort of thing. Although, I sent my granddaughter up there for a campus visit and she came back, "Gramp, the place is not for me." She says, "I'm going to be a minority." I said, "What do you mean?" She says, "Well, I'm not going to join the Corp. I'm going to be a civilian. Right now, I detect that they're a minority up there." JC: Mm hmm. HG: I says, "Well, it's a wise maneuver not to go there. You've got to be happy where you are to do the best you can do." My advice to a rook is you've got to decide whether you're going to be happy in this environment or not. If you are, you'll do well. If not, you're not going to do as well. You might get through, but you won't be the success that you could be maybe someplace else. I have two grandsons. I've got three grandsons but two older ones. I tried to talk them into going to Norwich. Mother was not military-oriented and things were not so, we were at war. We've been at war for so long they don't know what it's like to be without it but she didn't think that was the thing to do. I do have a grandson here locally but he's going to Mass Maritime Academy. JC: Oh. Okay. HG: So, he's quasi-military, in a way. I think that he'll finish that program up in two or three years. He didn't want to go to Norwich either. I don't know why. I don't think he gave it a chance, because he likes to ski. He's an outdoors boy. He would do well. He's got the military bearing and so forth, but he chose the Maritime as a place to go. He did hear that employment opportunities were greatest at Mass Maritime and they are. You graduate from that place, you get a job. JC: Mm hmm. HG: If you've got anything going for you at all. Norwich used to be able to say, "You're going to get a commission." But that's not true anymore either. JC: No. It's not. 20 HG: The place is not going to sell itself with providing a vocation after you're through. Where this place practically does. So, he was encouraged to go. It's local and so forth. JC: Yeah. So, you didn't have any relatives that attended Norwich? HG: Hmm? JC: You didn't have any relatives that attended Norwich? HG: No. I didn't. I don't have anybody that went to Norwich. No. None of them. JC: Well, is there anything else? HG: No. By golly, we've had quite an enjoyable interview. I've had some fun talking to you. I can't think of much more. JC: Well, I thank you very much. HG: I enjoyed it. Thank you, too. End of recording.

En la experiencia cotidiana del aula, es frecuente que el estudiante de diseño de indumentaria se vea problematizado a la hora de abordar un ejercicio proyectual. Suele adoptar una metodología que permite revelar un modo determinado de enfoque: ya sea, priorizando la materialidad por sobre la técnica y la forma, o bien preponderando la forma por sobre la técnica y la materialidad, o también introduciendo una determinada técnica que sugiera cierta materialidad y a la vez propicie su aplicación a la forma. Un ejemplo para el primer enfoque es el siguiente: el docente propone un tejido determinado para diseñar una pieza alrededor de un maniquí y en tamaño real, sin la posibilidad de recurrir a accesorios externos como pueden ser ballenas de sujeción o miriñaques. Se trata de contar con la materialidad, es decir, con un material textil específico dado y un cuerpo en tres dimensiones: el maniquí. En este caso, forma y técnica surgirían en una segunda instancia. Se prepondera así, la materialidad en primer lugar, ya que la forma surgirá teniendo en cuenta sus particularidades físicas vinculadas con el tacto y la caída de la tela. Influirá considerablemente en la forma si dicha materialidad es rígida u orgánica, liviana o pesada, lisa o rugosa, si es áspera o suave, si posee una trama abierta o cerrada entre otras características físicas. Así, nunca podría lograrse alrededor del maniquí una estructura rígida y volumétrica con un tejido liviano y abierto sin ayuda de ballenas de sujeción o de un miriñaque. Vale decir, la técnica surge influida por el material propuesto. Por su parte, tanto la moldería a plantear como las máquinas de costura a implementar para la posterior construcción del diseño serán en función de la propia materialidad en cuestión.
Distinto sería el ejemplo que se da a continuación, de modo de ilustrar el segundo enfoque, a través del cual se partiría de la forma. En este caso se recurriría directamente a la ilustración. Esto es el dibujo sobre papel, que es planteado en primer lugar. En este ejemplo metodológico el maniquí no es una herramienta necesariamente utilizada y mucho menos en la etapa inicial del ejercicio. El estudiante plantearía un dibujo a color de su diseño en un figurín en un tamaño aproximado de veinte o veinticinco centímetros con vistas de frente, espalda y perfiles. Este es el caso más popularizado y utilizado en las clases de diseño. Metodología que prepondera la forma por sobre la técnica y la materialidad, ambas variables que, en esta metodología son tomadas en cuenta en una segunda instancia, a veces inclusive, son sugeridas por una modelista que el estudiante contrata.
Por último, citando un caso para entender el tercer método de abordaje, se plantearía la siguiente situación: el encargo incluiría una premisa técnica de la cual partir que constaría de pensar en una prenda confeccionada con máquinas de costuras rectas y moldería de líneas rectas, sin posibilidad de incluir curvas. A partir de este modo de abordar el ejercicio se suscitarían formas predeterminadas específicas para materialidades particulares que habiliten dichas formas. Es decir, aquí, las variables forma y materialidad derivan como resultantes de la técnica específica inicialmente propuesta.
De esta manera, estos tres casos citados evidencian variadas metodologías para abordar un ejercicio de diseño en las cuales el tratamiento de las variables materialidad, técnica y forma se presenta de manera escindida. Es frecuente hallar propuestas para resolver ejercicios de diseño desde una óptica fragmentada, en la cual se exponen casos a seguir con un orden específico. Se trata de circunstancias procesales en las cuales una variable se sitúa y en consecuencia, es abordada, antes que las otras; de modo que una mirada integral, transversal de dichas variables, resulta abstracta y lejana. Ahora bien, ¿es alguna de estas variables, materialidad, técnica, forma más importante que las otras? ¿Cómo arribar a un buen resultado de diseño? ¿Hay resultados mejores que otros, dependiendo de cómo se priorizan estas variables? El sendero hacia respuestas certeras para un problema de diseño se presenta sinuoso. La teoría del diseño es un campo en construcción. Sus postulados y fronteras están en la actualidad en constante debate y sus sustentos teóricos provienen frecuentemente de otras disciplinas. El ejercicio del diseño ha devenido en una actividad de espectro sumamente amplio y el campo disciplinar un universo muy vasto. Desde fines del siglo XX hasta la actualidad, ya habiendo sido transitada la primer década del siglo XXI, se ha podido documentar un gran número de investigaciones sobre diseño1 . Todas ellas han contribuido al ejercicio de la disciplina y a la reflexión acerca de la multiplicidad de aplicaciones y diversificaciones que el diseño tiene, factor que invita a profundizar en especificidades cada vez más minuciosas2 .
Es oportuno mencionar que, si bien puede evidenciarse una fuerte actividad investigativa en el ámbito educativo desde el punto de vista teórico, también existe un interés creciente en atender problemáticas inherentes estrictamente a los procesos de diseño y la fabricación, la construcción de los productos, es decir hacer hincapié y ahondar en el estudio de estos procesos desde el punto de vista práctico. Así, pues surge la necesidad de cuestionar y profundizar sobre factores inherentes a la enseñanza y el aprendizaje de la disciplina en términos de procesos como respuesta a las inquietudes propias de docentes que a diario intentan mejorar las metodologías proyectuales implementadas en el aula como así también como un aporte a los estudiantes que intentan formarse y superarse permanentemente.
En esta instancia, es preciso distinguir el área y objeto de estudio que será comprendida: la relación pedagógica que se produce en el aula –especialmente en el ámbito universitario– y, como consecuencia, la manera en que los procesos proyectuales de estudiantes de diseño de indumentaria se llevan a cabo en ese espacio y que forman parte sustancial de la práctica de aprendizaje de la disciplina.
De esta manera, surgen nuevos interrogantes: ¿es posible pensar las variantes materialidad, técnica y forma de manera simultánea? O, acaso ¿es, inclusive, necesario un abordaje donde todas sean tomadas transversalmente de manera tal que se retroalimenten en forma conjunta, como en una relación sinérgica en favor de un proceso proyectual determinado? En ese caso, ¿es posible implementar una metodología interdisciplinaria dentro del aula? ¿De qué manera? Han sido citados tres ejemplos con abordajes metodológicos diferentes. Sin embargo, no es posible aseverar que, en la tarea de diseñar del estudiante, uno se más pertinente que otro.
Por el contrario, todos estos casos, permiten identificar distintos caminos procesales para concretar diversos resultados. Desde esta perspectiva, se hace pertinente profundizar sobre el estudio de la relación pedagógica que se da en el aula entre el docente y el estudiante y dentro de la misma, por ende, la relación entre las variables que se ponen en juego en la actividad proyectual como la materialidad, la técnica y la forma. Paralelamente también, las diversas posiciones y miradas que puede plantear el estudiante frente a dichas variables en su proceso de aprendizaje en el espacio áulico para la confección de una pieza de indumentaria. Dentro del marco de la carrera de Diseño de Modas, en la Facultad de Diseño y Comunicación de la Universidad de Palermo puede verse el resultado de gran parte del trabajo realizado en el aula reflejado en una muestra que involucra a una cantidad de piezas de indumentaria diseñadas por los estudiantes. El problema que ocupa a la presente investigación surge de la experiencia obtenida a partir de la labor en la coordinación de dicha muestra denominada "Moda en Palermo". Más aún, "Moda en Palermo" no es sólo una muestra, sino un proyecto pedagógico que congrega a todas las cátedras de las asignaturas de la carrera de Diseño de Modas en un ciclo de desfiles, video instalaciones y performances que tiene lugar al término de cada cuatrimestre en la Facultad de Diseño y Comunicación de la Universidad de Palermo. La posibilidad de llevar el mundo de las ideas al campo de lo posible, lo materializable, es parte de la metodología propuesta en dicha facultad. El proceso de aprendizaje de los estudiantes no finaliza en el aula, sino que toma cuerpo y puede apreciarse en esta muestra multidisciplinaria. En "Moda en Palermo" pueden verse las ideas materializadas.
"Materializadas" expresado como modo de llevar a cabo estas ideas a partir de la confección de una pieza, de un modelo en tres dimensiones. En el lenguaje académico y dentro del marco de la carrera de Diseño de Modas, este modelo tridimensional es denominado prototipo. Dentro del contexto que involucra el mencionado proyecto pedagógico, el concepto prototipo se encuentra estrechamente vinculado al diseño. Así, construir un prototipo es una forma de "hacer" diseño. Es oportuno introducir una definición de Joan Costa referida a diseño, dado que en ella es incluido el término prototipo. En dicha definición, Costa incluye el prototipo como parte del diseño. Asimismo, define al diseño como un "conjunto de actos (…)", por lo que se podría inferir que, según Costa, en lugar de diseño, se plantea el acto de diseñar. El diseño como acción.
Así, Joan Costa, refiriéndose al diseño, expresa:
(…) conjunto de actos de reflexión y formalización material que interviene en el proceso creativo de una obra original (gráfica, arquitectónica, objetual, ambiental) la cual es fruto de una combinatoria particular, mental y técnica de planificación ideación, proyección y desarrollo creativo en forma de un modelo o prototipo destinado a su reproducción, producción y disfunción por medios industriales.
En "Moda en Palermo", los proyectos devienen en prototipos tangibles que son presentados a la comunidad educativa la cual comprende docentes de diversas cátedras de las materias Diseño y materias afines como Moldería y Técnicas de Producción y también estudiantes de niveles iniciales y avanzados de las carreras Diseño de Indumentaria y Producción de Modas. Los proyectos de diseño gestados en el aula cada cuatrimestre toman cuerpo a modo de modelos realizados en escala real que se exhiben en esta muestra multidisciplinaria. La primera inquietud surge a partir de percibir ciertas problemáticas constructivas dadas en la resolución de algunos de estos prototipos. Esta observación incentivó a iniciar un camino de búsqueda despertando así muchos interrogantes que motivaron dicha investigación. En este sentido, una vez acabada la construcción del modelo prototipo es frecuente escuchar, por parte de los estudiantes, apreciaciones tales como: "el diseño no me quedó con la silueta que yo quería", o "Esto lo pensé más volumétrico pero no sé por qué no quedó así", o "Esta forma debió quedar sostenida y rígida pero se cae" o "Explíqueme cómo logro que este cuello me quede como en el dibujo". Dichas apreciaciones despertaron el interés en esta investigación al comprender que, en los procesos de diseño, los estudiantes dan la pauta de tener cierto desconocimiento acerca de materiales, sus capacidades y posibilidades técnico-constructivas y en consecuencia, las prestaciones que ofrecen. En los procesos de diseño suele prevalecer la forma por sobre los materiales y la técnica, como si la propuesta proyectual no necesitara incluir todas las variables tratadas integralmente como un abordaje necesario para la definición del diseño y la construcción de un modelo prototipo. Por ejemplo, en la práctica del diseño en el aula es frecuente la recurrencia al dibujo, al boceto bidimensional que suele expresarse a través de la fotocomposición y el collage. Así, la forma bidimensional, expresada a través de la ilustración, es la variable que vehiculiza la definición de la propuesta. La técnica y la materialidad a implementar suelen considerarse propias de una fase secundaria, de una instancia posterior al bocetado, el cual, espontá- neamente, surge en la fase inicial. De esta manera, la forma bidimensional no es situada por el estudiante como parte de un abordaje de resolución proyectual integral que surja como consecuencia de ensayos que incluyan propuestas vinculadas a la utilización de determinados materiales textiles y una técnica definida haciendo uso de máquinas diversas. Cabe preguntarse, en consecuencia, la forma en que el diseño es planteado paso a paso en la enseñanza, si es que hay un paso a paso. ¿Qué elementos intervienen en el acto pedagógico y la metodología proyectual implementados en el aula para la concreción de una pieza de diseño de indumentaria? Este último interrogante sintetiza el mencionado objeto de estudio que guía el presente trabajo: la relación pedagógica que se establece en el aula. Los interrogantes por parte de los estudiantes no surgen sólo con el resultado de las propuestas acabadas de diseño, como se ha ejemplificado anteriormente. Sino también, en los procesos proyectuales, en los caminos de construcción de las ideas que se dan previamente a la tarea de materialización. Interrogantes que invitan a reflexionar, incentivan a investigar y estimulan a abordar la problemática proponiendo una perspectiva desde la cual instancias que tienen que ver con el acto de resolver constructivamente una idea de diseño, puedan percibirse y entenderse como parte del acto mismo de diseñar. En dicho contexto, se considera el hecho de construir como instancia fundamental en el proceso proyectual. Así pues, esta investigación se propone estudiar sobre aquello que al estudiante le falta a la hora de concretar una idea, entendiéndose por concretar al hecho de materializar a través de la confección de un prototipo de diseño de indumentaria.
Ahora bien, claro está que resulta imposible ver materializados a través de la confección de prototipos todos los proyectos de diseño que el estudiante presenta a lo largo de un ciclo cuatrimestral, dado que estos son numerosos y el tiempo, muy escaso.
Sin embargo, cabe mencionar que incluir en el proceso de aprendizaje para el quehacer del estudiante instancias relacionadas con resolver constructivamente, parcial o totalmente, una pieza de indumentaria puede estimular, simultáneamente a la toma de determinadas decisiones relacionadas con la estética, como así también con la cuestión formal de dicha pieza en el propio proceso creativo. En este sentido, se toma la idea de hacer lugar a diná- micas de integración en las cuales las diversas variables como la materialidad, la técnica y la forma se yuxtaponen para afrontar global e integralmente las problemáticas de diseño y, en consecuencia, despertar nuevas consideraciones en términos de propuestas proyectuales en el aula. Así, pues, esta idea de abordaje integral para la resolución constructiva de un prototipo de indumentaria y el accionar transversal de las variables mencionadas pretenden ser estudiadas en mayor profundidad y eventualmente, pensar acerca de la posibilidad de incorporar nuevas actividades pedagógicas alineadas con esta perspectiva integradora como una de las herramientas viables para el aprendizaje en el aula.
De este modo, y a través de las variables de materialidad, técnica y forma se plantea el análisis de los diversos procesos creativos de diseño de indumentaria que se dan en el aula, planteando, como se ha mencionado, dos miradas: la del docente y la del estudiante, revelando así, tanto metodologías de enseñanza como maneras en las que el estudiante percibe aquello que aprende. Se intenta profundizar especialmente en las estrategias heurísticas que guían en el acto creativo y que se proponen en el aula, estrategias relacionadas con formas de proceder, con tácticas para hallar posibles respuestas a problemáticas concretas de diseño y que contribuyen a achicar el abismo entre el pensar y el hacer. Siendo el espacio áulico, entonces, el contexto tomado como objeto de estudio para la presente investigación por resultar escenario propicio para ahondar en las prácticas del diseño, se propone profundizar sobre el concepto de taller, según Ander-Egg (1994). Se trata de una metodología activa en el sistema de enseñanza-aprendizaje en la que se reemplaza el hablar y la argumentación teórica por un hacer de índole productivo, en el que se aprende haciendo, a través de una experiencia realizada conjuntamente, y en la que están implicados tanto los estudiantes como el docente. El taller es un lugar de conocimiento e intercambio de experiencias en el proceso pedagógico, es un espacio heurístico donde acontecen procesos de aprendizaje vinculados tanto con lo creativo como con lo técnico en el campo del diseño cuya dinámica se centra en el que aprende.
Así, en un taller se trabaja, se elabora, se piensan y se plantean procesos a partir del hacer. Se trata de un enseñar y aprender haciendo en grupo. Dado que, en el sistema de taller queda comprendida la práctica de una actividad que se lleva a cabo conjuntamente, resulta pertinente ahondar en aspectos vinculados con el término de grupo. El reconocido psiquiatra argentino Enrique Pichon-Rivière (1985) plantea que el pensar siempre es en grupo y caracteriza al grupo como:
Conjunto restringido de personas que, ligadas por constantes de tiempo y espacio y articuladas por su mutua representación interna se propone, en forma explícita o implícita, una tarea que constituye su finalidad, interactuando a través de complejos mecanismos de asunción y adjudicación de roles.
A partir del concepto de Pichon-Rivière, en el marco del presente trabajo se define el término grupo para referirse al conjunto de personas, docente y estudiantes que se vinculan didácticamente para el desarrollo de una actividad específica en el taller. Se trata de un grupo de enseñanza y de aprendizaje. Del grupo lo que se pretende es específicamente indagar, como objeto teórico de la didáctica, el acto pedagógico en la enseñanza de diseño y la manera en que los procesos proyectuales se llevan a cabo dentro de un grupo, específicamente, en el trabajo de taller. Así, los términos grupo y taller son claves para comprender la dinámica pedagógica propia del área de estudio, el aula, y serán profundizados oportunamente.
Por un lado, se propone comparar las perspectivas de los docentes en relación con la importancia que le otorgan los estudiantes a los materiales en los procesos creativos, junto a las posibilidades técnico-constructivas que éstos tienen y las prestaciones que ofrecen. Por el otro, se intenta identificar y estudiar desde ambas perspectivas, la del docente y la del estudiante, las problemáticas que se evidencian en dichos procesos para establecer si la consideración de los materiales es importante y en tal caso, en qué medida.
En este sentido, a través de ahondar en el estudio de lo que acontece en el taller y a partir del trabajo en grupo, esta investigación se propone pensar y profundizar sobre una perspectiva que pone de manifiesto el proceso de integración de dos grandes aspectos: el creativo y el técnico. Se plantea a raíz de visualizar una usual escisión de ambos conceptos a la hora de plantear un proyecto de diseño de indumentaria. El estudiante de diseño los aborda como si se tratara de dos universos ajenos entre sí, ambos pertenecientes a disciplinas diferentes. Es así que es frecuente hallar que el estudiante identifique y asocie el diseño con una disciplina perteneciente a un campo más creativo que técnico. Esta visión conduce a la imposibilidad de resolver constructivamente una idea de diseño y al descreimiento acerca de que técnica y materialidad son dos variables difícilmente escindibles. Más aún, variables facilitadoras y, tratadas conjunta y sinérgicamente, contribuyentes a la definición de una forma específica del objeto a diseñar. Por ende, podría pensarse en la eventualidad de un posible camino hacia diversas propuestas de diseño tratados los aspectos creativo y técnico, integral y transversalmente.
El concepto de heurística es tomado como apoyo teórico para comprender de qué trata el diseño en aula, de qué trata el diseño en términos de enseñanza y aprendizaje.
En este marco, docentes y estudiantes trabajan conjuntamente en el taller para abordar el diseño, que puede ser entendido en términos de una idea, un plan o un proyecto para la solución de un problema de diseño determinado. La heurística es definida por el Arquitecto Gastón Breyer (2007) como una disciplina vinculada a la teoría del problema, a la ciencia de la pregunta y al posicionamiento del sujeto. Así, considerado el diseño como proceso heurístico, se plantea en él, el desarrollo de la capacidad de problematizar.
Desde este punto de vista, es válido preguntar: ¿de qué manera se construye un proyecto?, ¿cómo se practica el diseño en un grupo de taller?, ¿cómo se halla la solución al problema planteado, especialmente, teniendo en cuenta que puede haber varias soluciones posibles en tanto existen diversas metodologías proyectuales de abordaje? La existencia de múltiples propuestas metodológicas válidas se manifiesta debido a que pueden desarrollarse variadas prácticas en la enseñanza y aprendizaje del diseño. Así, se propone el estudio de los fenómenos evidenciados en esas prácticas. Se refiere, en este sentido, a un acercamiento a la comprensión de aquello que acaece en el seno de la enseñanza del diseño a partir del análisis de los fenómenos evidenciados en sus prácticas heurísticas en el grupo de taller pensando en términos de dar una mirada integral. Surgen así otros interrogantes cuyas respuestas intentan ser un aporte al desarrollo y profundización de la disciplina en términos de contribuir a calidad académica: ¿Cuáles son las condiciones de producción, es decir, las posibilidades técnico-constructivas que hacen a la materialización, esto es, las técnicas de concreción implementadas en esas prácticas, ya sea en su generación, en términos de instancia procesal o en sus efectos, en términos de resultados? ¿Cómo se relacionan los estudiantes con los materiales en la práctica del diseño? ¿De qué manera influyen los docentes en dicha relación? ¿Qué relaciones se establecen entre el material y otras variables como la tecnología que posibilita la instancia técnico-constructiva y la forma en el proceso de la práctica proyectual? Y por último, ¿de qué manera la metodología proyectual propia del taller infiere en la concreción de un proyecto de diseño de indumentaria, en la construcción del prototipo? En el marco académico en el cual se lleva a cabo la relación pedagógica de enseñanza y aprendizaje y no obstante se percibe una clara dificultad para vincular los universos creativo y técnico, tanto docentes como estudiantes esperan que al finalizar la carrera de Dise- ño de Indumentaria el estudiante los integre. Ambos aspectos integrados, el creativo y el técnico, son necesarios para que el futuro diseñador pueda desenvolverse confiadamente y resolver problemáticas propias de la vida profesional, en la cual difícilmente la creatividad se ve aislada de la técnica. Así pues, la presente investigación propone analizar en paralelo ambos aspectos, junto a los conceptos de materialidad, técnica y forma y la posición que docentes y estudiantes, sobre todo, los primeros tienen del proceso que involucra al diseño y al rol del diseñador de indumentaria.
En términos de antecedentes, se registran en el ámbito académico, trabajos de investigación que revisan la naturaleza del actual sistema de formación de los estudiantes de diseño y que evidencian numerosas metodologías de enseñanza del diseño. La Universidad de Palermo cuenta con un vasto volumen de publicaciones de trabajos escritos por profesionales que revelan investigación acerca de una multiplicidad de líneas temáticas que incluyen a la pedagogía del diseño y al estudio del diseño como disciplina. Dichas publicaciones testimonian experiencias de docentes de diversas carreras de la Facultad de Diseño y Comunicación. En relación a los abordajes que propone el presente trabajo existen acercamientos fragmentarios, aunque no reúnen la especificidad que en este caso se presenta. Por ejemplo, Acerca de la enseñanza del diseño, reflexiones sobre una experiencia metodológica en la FADU (2007), escrito por María Carmen Frigerio, Silvia Pescio y Lucrecia Piattelli, aunque resultó de utilidad para profundizar sobre el sentido de la tarea en el denominado taller de diseño, específicamente referido a la transmisión y a la enseñanza del diseño, no se aboca a las problemáticas propias de las prácticas de estudiantes de indumentaria las cuales son abordadas en esta investigación.
Otro escrito referido a la enseñanza del diseño, en este caso, de diseño de indumentaria, fue Sobre la enseñanza del diseño de indumentaria. El desafío creativo (enseñanza del método) (2014), de Patricia Doria, docente de la Universidad de Palermo, en el cual profundiza sobre los distintos pasos propios de un método en un proceso proyectual para el diseño de una pieza de indumentaria. No obstante, la autora no se acerca a los puntos de vista que se plantean en este trabajo, ya que, por ejemplo, no explora problemáticas vinculadas con la integración de los aspectos creativo y técnico en la enseñanza y el aprendizaje.
Por otro lado, no se encontró material específico que evidenciara testimonio acerca de problemáticas vinculadas con la materialización de planteos proyectuales en diseño de indumentaria, tema central en este trabajo. No ha sido hallada referencia de estudios sobre los elementos que intervienen en la metodología proyectual que se implementa, dentro del espacio áulico, el taller, en los procesos de enseñanza y aprendizaje para la concreción de una pieza de diseño de indumentaria, específicamente.
Tampoco se registran casos que exploren la actividad vinculada a la dinámica de grupo en el taller de diseño de indumentaria y tampoco, que contemplen una mirada de abordaje integral del diseño para la construcción de una pieza prototipo dentro del marco de la carrera de diseño de indumentaria.
En conclusión, existe un vacío acerca del punto de vista que se trata la problemática en el presente trabajo. Así, esta investigación reviste un nivel de especificidad inédito al mismo tiempo que aporta un panorama actual propio de una problemática vigente en el ámbito educativo universitario. Contribuye con un abordaje específico al estudio de aquello que acontece dentro del aula, el denominado taller, contemplando ambas miradas, tanto la de estudiantes como la de docentes. Por tal motivo, resulta de utilidad para unos y otros, revelando nuevas propuestas de abordaje de la disciplina, no sólo desde el punto de vista proyectual sirviendo como guía para el planteo de proyectos a abordar, sino también desde la didáctica universitaria, aportando nuevas alternativas para una educación de calidad valorizando a sus actores, docentes y estudiantes que contribuyen a diario en sus prácticas de enseñar y aprender.
Tanto la metodología utilizada para el abordaje de la problemática que dio lugar al presente trabajo como las herramientas elaboradas, resultan de utilidad para investigaciones futuras; esencialmente, aquellas que se vinculen al estudio de la práctica áulica y a la integración de métodos diversos para el aprendizaje de la disciplina.
Asimismo, dicho trabajo resulta valioso para docentes y estudiantes de diversas disciplinas vinculadas con el diseño de indumentaria como son el diseño de vestuario, el diseño de calzado y el diseño de accesorios. Docentes y estudiantes que se interesan por reflexionar y profundizar sobre la práctica enseñanza-aprendizaje durante la formación académica, una práctica en permanente desarrollo y continuo devenir.
En este sentido, en la actualidad, transitando la segunda década del siglo XXI, la actualización de los saberes para la formación universitaria se torna indispensable en un contexto donde el conocimiento en las disciplinas del diseño requiere movilidad, evolución y reajuste permanente. Así, distintas acciones orientadas a enriquecer la relación enseñanzaaprendizaje no son sólo propicias, sino necesarias. El presente trabajo pretende ser de aporte poniendo al alcance de docentes y estudiantes herramientas metodológicas para el abordaje del diseño como una forma de afianzar la actualización de los campos disciplinares en el ámbito académico. La propuesta de estrategias pedagógicas y la generación de recursos didácticos son parte de dicha actualización y constituye un material provechoso orientado a facilitar avances en acciones propias de la formación de futuros profesionales del diseño y la comunicación.
De esta manera, dicho trabajo está enmarcado dentro de la línea temática Pedagogía del diseño y las comunicaciones.
La Universidad de Palermo resulta un ámbito académico propicio para investigar los distintos aspectos anteriormente planteados dado que es un lugar de intercambio permanente de saberes vinculados con el diseño como así también de experiencias profesionales y pedagógicas que tienen lugar y se comparten a través de diversos encuentros y muestras organizadas y llevadas a cabo por dicha universidad como el Encuentro Latinoamericano de Diseño y el Congreso Latinoamericano de Enseñanza del Diseño. Estos saberes y experiencias se divulgan en "Actas de Diseño", la única publicación académica de carácter periódico en el campo del diseño de alcance latinoamericano que la Facultad de Diseño y Comunicación de la Universidad de Palermo edita semestralmente desde el año 2006 en su rol de institución coordinadora del Foro de Escuelas de Diseño. Este marco de intercambio es ciertamente motivador para el desarrollo de la presente investigación. La Universidad de Palermo es un espacio académico productivo y valioso donde se construye conocimiento de adentro hacia fuera de la institución educativa y permite a los profesionales estar en permanente movimiento de interacción con especialistas y aficionados del diseño en general como una forma de contribuir a la disciplina. En términos específicos vinculados con el diseño de indumentaria, la Facultad de Diseño y Comunicación de la Universidad de Palermo considera, como se ha mencionado anteriormente, de particular importancia la posibilidad de llevar el mundo de las ideas al campo de lo posible. Es decir, ver materializadas las ideas de sus estudiantes y en ese sentido, investigar para mejorar los procesos de enseñanza y aprendizaje de modo de optimizar los resultados tiene un particular valor pedagógico. Así, el proyecto pedagógico "Moda en Palermo" es de vital importancia en la formación de los estudiantes. En las muestras que se llevan a cabo en "Moda en Palermo" se ven los resultados de un proceso de aprendizaje gestado en el aula. Dichos resultados devienen de un exhaustivo trabajo manifestado a través del proceso creativo. Generar ideas que devienen en un objeto de diseño materializado, en un prototipo, es una forma de hacer diseño. El resultado sintetiza la consolidación de un proceso de búsqueda constante y se hace visible en tanto la idea se materializa. Así, la Universidad de Palermo contribuye con una gran cantidad de espacios para la exploración y el desarrollo de estudios vinculados a la enseñanza y el aprendizaje, a la comprensión de aspectos relacionados con aquello que es hacer diseño, de vital importancia para la concreción de dicha investigación.
Desde el punto de vista pedagógico se pretende, en este sentido, conocer los fenómenos que se plantean en el trabajo de grupo en el denominado taller de manera tal de entender los resultados relacionados al núcleo sustancial de la propuesta pedagógica de la carrera de Diseño de Indumentaria de la Universidad de Palermo: como se ha expresado con anterioridad, trasladar el plano de las ideas al campo de lo posible y materializable.
Hipótesis
La hipótesis plantea que en el proceso de enseñanza y aprendizaje de diseño de indumentaria en el espacio áulico, la materialidad condiciona los aspectos técnico-constructivos y morfológicos e influye en la definición de un diseño concebido como prototipo.
Objetivo general
Como objetivo general se propone estudiar los elementos que intervienen en la metodología proyectual que se implementa, dentro del espacio áulico, en los procesos de enseñanza y aprendizaje para la concreción de una pieza de diseño de indumentaria en relación con la materialidad.
Objetivos específicos
Los objetivos específicos planteados son explorar la incidencia de la materialidad, según la óptica del estudiante, en el proceso de diseño; detectar e indagar acerca de la relación que el estudiante establece entre materialidad, técnica y forma en el proceso de diseño; comparar las visiones de los docentes en relación a la importancia que le dan los estudiantes a la materialidad en los procesos proyectuales; y analizar la perspectiva que le transmiten los docentes a sus estudiantes en cuanto a la relación entre materialidad, técnica y forma.
El trabajo está organizado en cinco capítulos. En el primer capítulo, La metodología proyectual para la concreción de una pieza de diseño de indumentaria, se exponen las perspectivas vinculadas a actividades relacionadas con la enseñanza y el aprendizaje del diseño de indumentaria en la universidad, sus alcances y límites. Específicamente, se profundiza sobre en la propuesta pedagógica de la Facultad de Diseño y Comunicación de Universidad de Palermo que radica en "hacer posible lo pensable". Se recurre al marco teórico de Bernhard Bürdek, Esther Díaz y al testimonio de una estudiante que expone sus preocupaciones en torno al tema tratado.
En el segundo capítulo, Heurística e interdisciplinariedad en la práctica de la enseñanza y el aprendizaje, se reflexiona sobre los elementos que intervienen en el acto pedagógico y la metodología proyectual implementados en el aula para la concreción de una pieza de diseño de indumentaria. Así, este capítulo examina el trabajo áulico en el marco heurístico. Para profundizar en el concepto de la heurística, se recurre a la fuente teórica del arquitecto Gastón Breyer. De modo de contribuir a la comprensión de estas prácticas, asimismo, se consideran y desarrollan los términos grupo y taller, según Enrique Pichon-Rivière y Ezequiel Ander-Egg, respectivamente, conceptos tan vitales en la cotidianeidad del trabajo áulico. Desde este encuadre, asimismo, con el aporte teórico del pensador contemporáneo Víctor Margolin, se ahonda sobre la posibilidad de favorecer y alinear la práctica de dise- ñar con una perspectiva de enseñanza multidisciplinaria, integral, que contemple variables transversales abiertas a revisión permanente. Se propone así, contribuir a la construcción de diversas perspectivas, incluyendo testimonios de docentes que sugieren diversos puntos de vista.
En el tercer capítulo, Diseño, metodología y Complejidad, se plantea una aproximación al diseño a partir de la Complejidad. Desde este prisma, se recurre, por un lado, al aporte del pensador austríaco Paul Feyerabend, quien difunde en Contra el método la ausencia de un método con principios inalterables en torno al diseño y, por el otro, a la contribución del filósofo y sociólogo francés, Edgar Morin, quien con su trabajo Introducción al pensamiento complejo contribuye en la construcción de modos de pensar.
Así, su aporte es parte sustancial de este capítulo que pretende dar lugar a la consideración de un pensamiento complejo –un abordaje transversal– para comprender y abordar las problemáticas expuestas, específicamente, relativas a los elementos que intervienen en el abordaje de la construcción de un prototipo de indumentaria.
En el cuarto capítulo, Materialidad, técnica y forma en la práctica proyectual, deja al descubierto un contexto de realidad virtual que aparenta alejar al estudiante de la realidad material. En este aspecto, Ezio Manzini hace por un lado, un aporte valioso para pensar la práctica del diseño a partir de la virtualidad de los materiales y por el otro, contribuye a reflexionar acerca del objeto como la "materialización de algo pensable posible" estableciendo en el objeto un punto de intersección entre las líneas del pensamiento y las del desarrollo técnico. Además, este capítulo profundiza sobre el funcionamiento de las variables y expone una mirada responsable crítica de docentes entrevistados en el marco de esta investigación acerca de su incidencia en los procesos de aprendizaje. Con el aporte teórico de Richard Buchanan y Víctor Margolin, se propone pensar en la materialidad como una variable que define a la forma a partir del hacer. En este sentido, se introduce el espacio de taller técnico como escenario posible para interiorizarse de recursos constructivos y pensar la materialidad con la intervención de la técnica, un recurso con el que cuenta la Universidad de Palermo para la construcción de prototipos. Se incluye una serie de imágenes que da cuenta de la perspectiva de trabajo planteada. Por último, a partir de la perspectiva docente, toma la idea de hacer lugar a dinámicas de integración en las cuales las diversas variables se yuxtaponen para afrontar global e integralmente las problemáticas de diseño y, en consecuencia, despertar nuevas consideraciones en términos de propuestas proyectuales en el aula para la construcción de un prototipo.
Finalmente, en el quinto y último capítulo, se detalla el planteamiento metodológico y los resultados obtenidos a través del trabajo de campo realizado.
Notas
1. Entre las organizaciones dedicadas a difundir los avances al respecto y a realizar conferencias de diseño con temáticas muy amplias se encuentran la European Academy of Design, Japanese Society for the Science of Design y Design Research Society (Margolin, 2009).
2. En Las rutas del diseño (2009), libro que comprende un compilado de trabajos que tratan diversos temas vinculados a la investigación sobre diseño, se enfatiza sobre el lineamiento de Víctor Margolin, investigador que se ha dedicado a la enseñanza del diseño en la Universidad de Illinois en la ciudad de Chicago desde 1982. Margolin profundiza sobre el planteo del diseño como una disciplina holística e interdisciplinaria, concepto que resulta revelador para el abordaje de las problemáticas expuestas en la presente investigación.

Along with economic growth and improved living standards, waste from households, industries, and commercial or service establishments is expected to increase rapidly over the next years. Managing this waste is a hard challenge for the Government of Vietnam because of its substantial cost and lack of awareness and participation of people and businesses. Wastes can be classified according to: their form (wastewater, solid waste); their origin (industrial wastes, agricultural wastes, urban (municipal) wastes); and their hazardous nature (non-hazardous or hazardous).

In 1990, Australia and New Zealand were ranked around 25th and 37th in terms of Gross National Product (GNP) per capita, having been the highest-income countries in the world one hundred years earlier. Those countries relatively poor economic growth performance over that long period contrasts markedly with that of the past 15 years, when these two economies out-performed most other high-income countries. This difference in growth performance is due to major economic policy reforms during the past two to three decades, both at and behind the border. The report provide new evidence on the extent of governmental distortions to agricultural incentives in particular in the Australian and New Zealand economies since the late 1940s, both directly due to agricultural policies per se and indirectly (and negatively) through protection to manufacturing.

The 6th International Week of Science, Technology and Innovation, is an event organized by Universidad Francisco de Paula Santander Cúcuta and Ocaña, aimed at the academic - scientific community and the productive sectors of the region, whose purpose is the dissemination of the advances in research and extension of institutions of the National and International scope, through research groups and seedbeds, promoting the participation of the productive sectors in research, extension, technological development and innovation activities that strengthen the University - Company - State relationship and the exchange of experiences with researchers from the National and International level. ; La VI Semana Internacional de la Ciencia, Tecnología e Innovación, es un evento organizado por la Universidad Francisco de Paula Santander Cúcuta y Ocaña, dirigido a la comunidad académico - científica y los sectores productivos de la región, cuyo propósito es la difusión de los avances en investigación. y extensión de instituciones del ámbito Nacional e Internacional, a través de grupos de investigación y semillero, promoviendo la participación de los sectores productivos en actividades de investigación, extensión, desarrollo tecnológico e innovación que fortalezcan la relación Universidad - Empresa - Estado y el intercambio de experiencias con investigadores desde el nivel Nacional e Internacional. ; Programación Aplicación de la metodología de valorización del estado organizacional veo asociada al modelo de acompañamiento rural de la escuela de liderazgo, asociatividad y desarrollo comunitario eladc en norte de santander Apoyo a la internacionalización del sector cacao en norte de santander a través de establecer estrategias de posicionamiento y protección de la marca somos cacao s.a.s. con base en las certificaciones requeridas por el gobierno de colombia Costos de producción: innovaciones y prácticas estratégicas de las mipymes manufactureras Cultura y obligaciones tributarias: un análisis en el sector comercial El impacto de marketing digital en la competitividad las empresas del sector de restaurantes en la ciudad de cúcuta y su área metropolitana El manejo de personal ante la actitud hacia el compromiso organizacional en las empresas del sector hotelero de cúcuta colombia Estrategias laborales de utilización del tiempo libre para estudiantes ufps Fundamentos conceptuales de la estrategia en los negocios internacionales: caso café galavis, cúcuta, colombia Modelo de evaluación externa para la cadena de valor de cacao en norte de santander San cayetano, un destino turistico en norte de santander desde el marketing social Sucesión generacional de las empresas familiares. una mirada desde la literatura mototaxism as an occupational alternative to unemployment Lineamientos pedagógicos para la formación del contador público en la gestión ambiental, desde la accion docente Videoclip como herramienta de promoción turística, caso: municipio de arboledas, norte de santander Análisis del rol de las mujeres administrativas en la resolución de conflictos del sector cooperativo en ocaña, norte de santander Diagnóstico de capacidades emprendedoras con enfoque de economia naranja en aprendices sena cedrum Incidencia del uso de las tic en los resultados académicos La nueva competencia geopolítica por el cáucaso sur y sus complejos conflictos internos Análisis socio-económico de las comunidades indígenas y rom reconocidas por la alcaldía municipal de san josé de cúcuta Auditoria forense, técnica esencial en la prevención de contravenciones en el manejo financiero del sector bancario de ocaña Caracterización del desempeño financiero en las empresas del sector hotelero en el municipio de san josé de cúcuta-colombia para los periodos 2014-2017 Certificación halal como estrategia de internacionalización de productos agrícolas de norte de santander El perfil del emprendedor en tiempo de crisis Estandarización de procesos administrativos y operativos en la fabricación de productos textiles bajo el paradigma de los manuales de procedimientos Impacto socio-económico, político y ambiental de los asentamientos humanos en la periferia de la ciudad Inversiones sostenibles: agroecoturismo Representaciones sociales de los modelos gerenciales que poseen los empresarios de los clubes deportivos de fútbol de la ciudad de cúcuta – norte de santander Panorama actual de la educación superior a distancia en iberoamérica Realidad socioeconómica de la población migratoria venezolana en cúcuta Gestión del conocimiento como estrategia competitiva en las organizaciones entre colombia- finlandia Estudios de la inteligencia sobre la educación para la innovación El proceso de enseñanza en las ciencias contables de la ufps-cucuta La innovación como elemento competitivo de las organizaciones de china La economía sostenible como factor crucial de la localización de plantas industriales en colombia Apropiación y construcción territorial campesina en el catatumbo: zona de reserva campesina y territorios agroalimentarios campesinos Caracterización de semillas con especies nativas propias del catatumbo como eje estratégico para la conservación y manejo agroecológico de la zona Evaluación del endocarpio de coco (cocos nucifera) como sustrato en el cultivo de orellana (pleurotus ostreatus) en el municipio de villa del rosario, norte de santander Propiedades mecánicas del adobe mejorado con cal y ceniza volante, como empleo en ladrillos de construcción ambientalmente sostenible en tierra Reconstrucción de series de tiempo de precipitación mensual en clima tropical Estructura de los escarabajos coprófagos en la evaluación del estado de conservación en el bosque seco del jardín botánico jorge enrique quintero arenas de la universidad francisco de paula santander ocaña Calidad del agua en la producción de las unidades piscícolas en los municipios del zulia, san cayetano y villa del rosario Comparación de sistemas de evaluación seminal en el parámetro de motilidad (sca® versus imagej®) en semen porcino Diagnóstico de sistemas de producción caprino en el área metropolitana de cúcuta (norte de santander) Efecto de diferentes niveles de inclusión de harina de chachafruto (erythrina edulis), sobre el desempeño productivo y la sobrevivencia de juveniles de cachama negra (colossoma macropomum) Elaboración y caracterización fisicoquímica de la harina de banano bocadillo (musaaa simmonds) Estandarización de diferentes concentrados de sucrosa. en la vitrificación de semen ovino Evaluación de la viabilidad de semillas de capsicum annuum usando la prueba de tetrazolio Identificación de factores que han conllevado a la disminución del rebaño caprino en el área metropolitana de cúcuta Integración de datos georreferenciados, multiescala y multidisciplinares para caracterizar espacialmente la respuesta fenotípica del caballo criollo de la orinoquía La apicultura como estrategia de conservación de la biodiversidad y alternativa productiva de la ganadería doble propósito con uso de sistemas silvopastoriles del bosque seco tropical Uso de la analítica de datos en el estudio epidemiológico de la fiebre aftosa. aplicación en el departamento del cesar Conservación del caballo criollo de la orinoquía y desarrollo de una línea de caballo de tropa para el ejército nacional de colombia Determinación de la edad óptima de pastoreo para la estrella africana (cynodon plectostachyus) en un sistema lechero tropical. Diseño de una planta de producción de células bhk-21 para la obtención de la vacuna leucemia felina vlfe usando superpro designer Efecto del concentrado autólogo de plaquetas en las velocidades espermáticas en semen ovino Evaluación de la funcionalidad del almidon de arracacha (arracacia xanthorrhiza) en galletas tipos finas Evaluación de los impactos ambientales derivados de la actividad de minería de arcilla o carbón a partir de una propuesta metodológica Evaluación ex ante de un proyecto de conservación y desarrollo a partir de "pseudognaphalium" (vira vira) en bogotá-colombia Impacto de los extremos de variabilidad climática en la comunidad de macroinvertebrados acuáticos en el cauce principal del río pamplonita en el periodo (2000 – 2014) Impactos agropecuarios en el catatumbo ocacionados por la conflictividad social pre-factibilidad de la producción de bioplástico a partir de almidón extraido de cáscaras de platanos por fermentación aerobia del hongo rizophus oryzae Validación de la metodologia para la estimacion de la biomasa total de la vegetacion arborea de la comuna 9 del municipio san josé de cucuta Simulación de un bioproceso a escala industrial para la producción del hongo medicinal ganoderma lucidum mediante la herramienta computacional superpro designer Simulación mediante cfd de la hidrodinámicagenerada por una turbina rushton a diferentes velocidades de agitación en fluidos no-newtonianos Sensibilidad de plantas de tomate a salinidad por nacl y fusarium oxysporum Evaluación de las propiedades fisicoquímicas, microbiológicas y organoléptica de de cupcakes apartir de moringa stevia y cocoa. Aislamiento e identificacion de cepas nativas productoras de exopolisacaridos a partir de productos autoctonos arnr 16s como herramienta aplicada en la caracterización molecular de géneros y especies de bacterias Aspectos a tener en cuenta en el proceso de vigilancia epidemiologica relacionada con el riesgo biológico Biodegradabilidad y toxicidad de lixiviados de rellenos sanitarios tratados por fotocatálisis heterogénea, usando tio2 en un colector parabólico compuesto Concentración de cultivos microalgales empleando un electroflotador open-access . Efecto de la altitud y tamaño de explotaciones ganaderas sobre aspectos productivos y reproductivos en la region sur-occidental de norte de santander Efecto de la fuente de carbono en un proceso de fijación biológica de nitrógeno utilizando efluentes piscicolas Estimación de la huella hídrica verde y azul en la producción de caña de azúcar (saccharum officinarum) orgánica. caso de estudio: zona centro del valle del cauca Estrategias de adaptación al cambio climático y de prevención ante la ocurrencia de desastres socio-naturales a partir de la percepción de los habitantes del municipio chitagá Evaluación de dos fuentes de calcio sobre parámetros de calidad de cascara del huevo en reproductoras cobb avian 48 en condiciones comerciales Evaluación de la capacidad de biorremediación de aguas postconsumo de piscicultura mediante el uso de microalgas y cianobacterias Evaluación de la toxicidad de extractos de plantas medicinales contra spodoptera exigua Evaluación de un sistema de riego automatizado para el control de humedad en el proceso de compostaje Evaluación del bienestar animal en proyecto piscicola de la universidad francisco de paula santander ocaña Evaluación del sistema de tratamiento agua potable san fernando – eficiencia y calidad Identificación del potencial agroindustrial del municipio de tibú desde indicadores del desarrollo sostenible Inducción de genes pr1 y mpk1 asociados a resistencia en papaya inoculada con prsv Medición del bienestar animal en el aprisco de la granja experimental de la universidad francisco de paula santander ocaña, mediante el protocolo welfare quality® Medición del bienestar animal en el sistema de producción avícola de la granja experimental de la universidad francisco de paula santander ocaña ufpso, mediante el protocolo welfare quality® Microorganismos rizosféricos asociados al ciclo del carbono en el cultivo de arroz, norte de santander Potencial biotecnológico de una cepa de oscillatoria sp termotolerante para la producción de colorantes Protocolo de cosecha y determinacion de metabolitos de interes industrial en microalgas Protocolo para el mantenimiento de cepas y escalamiento en la producción de microalgas de interés industrial Protocolo para la bioprospección eficiente de microalgas y cianobacterias termotolerantes Protocolo para la extracción de ficobiliproteínas (apc, c-pc, pe) de cianobacterias termotolerantes Sostenibilidad y responsabilidad social: factor determinante de buenas prácticas en el sector microempresarial, ocaña-colombia Tratamiento de aguas contaminadas con glifosato utilizando electrocoagulación Elaboración de yogurt funcional a partir de remolacha (beta vulgaris) y leche ultrasonificada Solución por métodos numéricos de la ecuación del calor asociada a la transferencia térmica en polímeros Caracterización mineralógica de material arcilloso de la formación guayabo a diferentes por difracción de rayos x Impacto de la interdisciplinariedad en las investigaciones científicas Análisis descriptivo de las concepciones sobre storytelling en matemáticas Historia de las vías férreas de cúcuta, en el currículo de matemática financiera Impacto del programa jóvenes en acción en la formacion inicial de educadores en matematicas Efecto de la velocidad de centrifugado sobre las propiedades anticorrosivas de los recubrimientos de bismuto-titanio obtenidos vía sol-gel en sustratos de 316l Análisis térmico, ftir-atr y frx de nidos de avispas de colombia Comportamiento térmico de las cenizas de carbón provenientes de la combustión en hornos colmena y su potencial uso como nutriente tecnológico en la elaboración de bloques cerámicos extruídos Factores actitudinales de los estudiantes que inciden en la enseñanza del calculo diferencial bajo el enfoque ontosemiótico Variables críticas que condicionan la competitividad de la cerámica artesanal en norte de santander bajo la dinámica de su cadena productiva Evaluación en laboratorio del grado de infección de burkholderia glumae en semillas de arroz Valores y servicios ambientales de los árboles urbanos desde el enfoque de la purificación del aire Análisis del recurso solar y eólico en tres zonas específicas del departamento de norte de santander Desarrollo experimental de mezclas para la obtención de materiales compuestos de suelo cemento y residuos de demolición, conformados a través de prensa manual: una alternativa para la sostenibilidad a partir del reuso de materiales de construcción La participacion y el dialogo en la construccion de paz territorial Medición de la calidad y eficacia de la participación ciudadana en el catatumbo con aplicación de la metodología siriri (alianza ufpso-fip) Aprendizaje basado en problemas (abp) para el desarrollo de competencias científicas en biología Objetivos para garantizar la efectividad del principio de oportunidad en colombia El exodo transfronterizo: y el cambio en las dinámicas sociales, economicas y politicas -municipio de cúcuta-san antonio (estado táchira) Módulo de refugio temporal madera pet + acero reciclado: ensambles mpet+ar Factores asociados a las pruebas saber 11° en las instituciones educativas del municipio de pamplona Análisis del cumplimiento del enfoque de gestión responsable desde la perspectiva de los sistemas de gestión de calidad y ambiental Estudio comparativo de la aplicación de tecnologías colaborativas en el desarrollo de ambientes de aprendizaje Evaluación del ova big toy, herramienta para la enseñanza del ingles en niños de primaria Imaginarios sobre ciudadanía de frontera: un abordaje desde las distintas miradas de los sectores sociales que convergen en la ciudad cúcuta El uso de las tic y su inclusión en las prácticas pedagógicas de los docentes del programa de enfermería ufps Caracteres multiculturales e intuicionistas del emprendimiento en la ciudad fronteriza san josé de cúcuta y los signos de enfoque diferencial para la administración local Hipótesis normativa para una eficaz protección del medio ambiente en colombia Narrativa visual de la migración de venezolanos, caso: puentes internacionales francisco de paula santander y simón bolivar Incorporación de los sistemas educativos lego y fischer technik como recursos de juego didácticos en la enseñanza de la matemática en grados séptimo del colegio isidro caballero delgado del municipio de floridablanca en santander colombia El concepto de inclusión en la educacion superior: acciones demostrativas y buenas prácticas. caso de estudio, institución francisco de paula santander Animación digital como herramienta para el aprendizaje de niños con discapacidad auditiva, caso: cuentos y fábulas infantiles Estrategias de intervención en el proceso "enseñanza de la historia" museo casa natal del general francisco de paula santander Software educativo para el apoyo del aprendizaje de la asignatura fundamentos de programación Las nuevas dinamicas de la movilidad humana en la frontera colombo-venezolana caso: venezolanos El uso de instagram como herramienta de branding en las empresas de calzado en norte de santander Percepciones de los migrantes fronterizos sobre su representación mediática en los contenidos informativos emitidos por canales de televisión nacionales La arcilla y su influencia en la arquitectura representativa del sector centro como elementos de identidad de la ciudad de san josé de cúcuta Reconstrucción de la memoria histórica en el catatumbo a partir de la producción audiovisual sobre la masacre de santa inés, vegas de motilonia y planadas el 24 y 25 de diciembre de 2004 Análisis del contexto del aula para fortalecer las habilidades integradas en inglés como lengua extranjera a través de la enseñanza basada en tareas en el grado séptimo de la institución educativa integrado juan atalaya Eficacia de la ley 1561 de 2012 para otorgar títulos de propiedad al poseedor material de bienes inmuebles urbanos y rurales y sanear la falsa tradición en el municipio de cúcuta De la práctica y la investigación a los syllabus en ingeniería. Una experiencia de actualización permanente de la cátedra. La investigación formativa como desafío en la educación superior. caso: semillero de investigación en mantenimiento – universidad francisco de paula santander Práctica pedagógica de los docentes y las competencias y procesos matemáticos de los estudiantes en educación media y superior: alineación mediante un modelo de ecuaciones estructurales Factores que influyen en el bienestar y satifaccion en la vida de los inmigrantes en la zona de frontera Desde el enfoque socio crítico: el restablecimiento de los derechos de los estudiantes en condición de víctimas de las instituciones educativas del municipio de san josé de cúcuta, norte de santander 2018-2019 Vacíos de protección y riesgos psicosociales en el marco de la migración venezolana: un análisis desde lo documental Incidencia en la seguridad personal frente a la regulación de los delitos informáticos en la universidad de pamplona sede villa del rosario Estrategia socioeducativa para la prevención del dengue en el municipio de los patios Permanencia académica en un grupo de estudiantes de la universidad francisco de paula santander Las barreras en el acceso a la justicia para las mujeres victimas del conflicto en norte de santander. El caso de la fundación myriam castrillón Comisiones de la verdad y derecho a la verdad en la jurisprudencia de la corte interamericana de derechos humanos La incidencia de las dinámicas urbanas y territoriales en la transformación de la ciudad. el caso de la avenida 1 éste de la ciudad de san josé de cúcuta La comunicación como acción de motivación-productividad en las organizaciones Rendimiento académico en matemáticas y objetos interactivos de aprendizaje-oia Implicaciones sociales del celular en la vida cotidiana de los jóvenes universitarios Estudio de la compactación con calor aplicada sobre fardos de paja para el diseño de soluciones constructivas estructurales Consulta popular minera y competencias de las entidades territoriales (muncipios) La pérdida de oportunidad en la responsabilidad médica del estado Derechos humanos y resocialización en colombia: una cuestión de política criminal Modelo pedagógico transdisciplinario en las carreras de ciencias administrativas y económicas: un cambio de paradigma Una mirada a las concepciones sobre la formación docente: programa de licenciatura en educación infantil. Corporación universitaria minuto de dios – Colombia Análisis de la percepción que presentan los docentes, administrativos y estudiantes de la universidad de pamplona sobre la rsu en sus ejes: campus responsable, formación profesional y ciudadana, gestión social del conocimiento y participación social Transformaciones de la dinámica de familias venezolanas asistidos por la propuesta la casita solidaria Construcción de cultura y territorio en el municipio de tibú por jóvenes víctimas del conflicto Percepción de la discriminación por razones de orientación sexual en estudiantes de trabajo social en la ufps cúcuta Catálogo arquimod (ver lo que hemos sido capaces de hacer) Excepción de inconstitucionalidad frente a la conservación de la supremacía constitucional en colombia Energía renovable para la población vulnerable del barrio el paramo en el municipio villa del rosario estudio de la eficacia de la defensa ejercida por los defensores publicos en los procesos penales en el municipio de villa del rosario análisis desde el principio del enfoque diferencial de las mujeres trabajadoras sexuales migrantes en el municipio de cúcuta y zona de frontera niños y niñas migrantes en zona de frontera e inclusión en las instituciones educativas en el municipio de san jose de cùcuta análisis jurisprudencial en relación de los derechos humanos en la población migrante venezolana región del catatumbo: almas atrapadas entre las memorias del olvido y el dolor población migrante entre fronteras analisis de la transculturación y adaptación de los migrantes venezolanos en el municipio de san josé de san josé de cúcuta realidad fronteriza e impacto social de la migración de población venezolana en el municipio de san josé de cúcuta. (2016-2018) el impacto de la salud pública en las mujeres migrantes de venezuela en estado de gestación en el municipio san josé de cúcuta en el año 2016-2019 liderazgos de las mujeres gramaloteras a partir del proceso de reasentamiento al nuevo casco urbano formación de conciencia política en la niñez juguemos por la igualdad saberes de los yerbateros sobre medicina tradicional en el municipio de cúcuta durante el primer semestre del 2020 la restitución de tierras como reparación transformadora en la construcción de paz 437 estrategia educomunicativa para la prevención del acoso escolar en el colegio instituto técnico patios centro 2-sede patios centro uno uso de la guadua para viviendas de interés social frente a sistemas constructivos tradicionales en la ciudad de cúcuta heterotópia de género: reflexiones desde las mujeres trabajadores informales avances teórico-metodológicos del estudio de factores asociados a los resultados de las pruebas saber pro en los estudiantes de ingenieria civil de la ufps reconstrucción de memoria histórica de las mujeres desplazadas en el barrio ciudad rodeo, cúcuta, mediante la elaboración de un monumento representativo optimización estructural y arquitectónica desde lógicas topológicas a soluciones constructivas de arquitectura en tierra reconstrucción de memoria histórica a través de la creación del libro de relatos para narrar las experiencias de vida de las mujeres víctimas del conflicto armado residentes en el barrio ciudad rodeo, cúcuta-colombia estado del arte de instrumentos de evaluación sobre estilos de aprendizaje en publicaciones científicas internacionales protección a los derechos colectivos y del ambiente en villa del rosario y cúcuta frente a la emisión de agentes contaminantes por el transporte público responsabilidad estatal frente a la vulneración de los derechos humanos a mujeres víctimas de violencia sexual en el conflicto armado interno en colombia mineria tradiconal una mineria especial proteccion laboral a pastores y religiosos revisión de literatura sobre computación cuántica aplicada propuesta de un laboratorio steam bajo el enfoque industria 4.0 en la ufps sistema de control de un estacionamiento basado en tecnología rfid comparacion de momentos flectores producidos por carga gravitacional en losas de concreto reforzado armadas en dos direcciones obtenidos por diferentes metodos de analisis prototipo para la adquisición de señales cardiacas aplicaciones alternativas ambientalmente sustentables del carbón de norte de santander recubrimientos de dioxido de titanio mediante rf-magnetron sputtering sobre sustratos geopolimericos a base de metacaolines automatización de un sistema hidropónico nft para la optimización de la producción de hortalizas de hoja en la casa rural villa fonseca del municipio de salazar de las palmas n. de s. herramientas y algoritmo para la identificación de personas con procesamiento de señales cálculo del valor de variación del asentamiento de consolidación por efecto de modificación de cargas estructurales en zona de amenaza sísmica alta. caso de estudio: san jose de cucuta, colombia diseño e implementación de un banco para la detección de fallas en motores trifásicos mediante el uso de inteligencia artificial estudio comparativo de modelos empíricos para el cálculo de la evapotranspiración potencial en la región andina colombiana diseño y analisis de transductores fotonicos para aplicaciones de biosensado extracción de características sobre regiones de interés en mamogramas digitales adaptación de una bacteria nativa compatible con acidithiobacillus ferrooxidans y acidithiobacillus thiooxidans para desulfurar carbón a nivel de laboratorio análisis de variables ambientales para el diseño de circuitos de medición para sistemas solares fotovoltaicos análisis de un escenario de radio sobre fibra como propuesta para soportar los requerimientos de la red 5g software de reconocimiento facial para el control de acceso del personal a los laboratorios de investigación del programa de ingeniería de sistemas de la universidad francisco de paula santander prototipo de un panel modular compuesto a partir de calcín y grafeno, para la configuración arquitectónica de una envolvente pivotante captadora de energía diseño del sistema de riego auto-suficiente y sostenible para zonas verdes en la universidad francisco de paula santander, mediante el uso del software arduino y labview modelo dinámico lineal y no lineal de un dedo robótico para una prótesis de mano modelación y simulación hidráulica de las zonas de desbordamiento de la quebrada tanauca mediante hec-ras en la provincia de pamplona, norte de santander diseño, desarrollo e integración de un chatbot en organizaciones para la mejora en la atención usando inteligencia artificial como servicio en la nube diseño de protesis transfemoral mecanica graduable responsabilidad social empresarial como estrategia de impulso al emprendimiento e innovación en la ciudad de san josé de cúcuta condiciones de vulnerabilidad del contexto socioeducativo de la región del catatumbo que inciden en el aprendizaje de las matemáticas percepción social de estudiantes con discapacidad auditiva y sus docentes sobre la educación inclusiva en una universidad privada de cúcuta el deporte como una herramienta para la construcción de paz territorial en el pos-acuerdo de paz, en cúcuta zeolitas sódicas y potásicas a partir de cenizas volantes provenientes de la combustión del carbón de la termoeléctrica termotasajero s.a.s estudio para la viabilidad de una zona franca en áreas del posconflicto en el municipio de ocaña, norte de santander estudio sobre el impacto del consumo de energía en las ips de san josé de cúcuta desde el análisis del plan de uso eficiente de ahorro de energía implementado tratado de integración progresista de asociación transpacífico (cptpp) evolución e implicaciones para colombia dentro del contexto de inversión aplicación de un sistema de realidad virtual para la práctica en los procesos de importación y exportación en los estudiantes de comercio internacional de la ufps oportunidad de los supermercados y almacenes de cadena instalados en cúcuta por la crisis venezolana la efectividad de la legislación y desarrollo reglamentario en el progreso fronterizo cucuteño situación actual de la zona franca-cucuta como alternativa de productividad para la generacion de empleo las buenas prácticas para la internacionalización de la miel de abeja de asoarimaan oferta exportable del municipio de teorama del departamento de norte de santander como alternativa para el desarrollo socieconómico retos y oportunidades del sector agricola de norte de santander en el mercado asiatico plan de internacionalización para la miel producida por la asociación asoarimaan del corregimiento buena esperanza, municipio de cúcuta comercio internacional de norte de santander y santander frente a las políticas comerciales colombianas después de la salida de venezuela de la comunidad andina de naciones entre 2006-2018 caracterización del sector mipymes formal e informal de la ciudad de san josé de cúcuta evaluación de las propiedades fisicoquímica del caliz de la physalis peruviana (uchuva) en la elaboración de ungüento antiinflamatorio establecimiento de un cultivo de scenedesmus sp en fotobioreactores de 2 l para la producción de carotenoides de interés comercial a partir de efluentes piscicolas análisis de la tasa de cambio en la cobertura natural presente en la ronda hídrica del río pamplonita en su paso por el casco urbano del municipio de cúcuta microencapsulación mediante secado por aspersión del aceite contenido de las hojas de mora (rubus glaucus) diseño experimental para la cuantificación de biomasa aérea a partir de ecuaciones alométricas en ecosistemas de bosque muy seco tropical, sometidos a baja intervención antrópica validacion del software open casa, sperm motility track v. 1.0 y bgm de imagej en semen de porcino evaluación del efecto de la composición del medio de cultivo sobre la propagación in vitro de híbridos de phalaenopsis determinación de la calidad fisiológica de la semillas de linum usitatissimum l. utilizando el test de tetrazolio pisum sativum un bioindicador eficaz para evaluar el efecto citotoxico del hipoclorito de sodio factores de riesgo relacionados con la adherencia al tratamiento en pacientes con hipertensión arterial, centro de salud once de noviembre calidad de vida del cuidador informal del paciente con alzheimer de la clínica stella maris de cúcuta en el primer semestre del año 2019 percepción de la eutanasia en docentes de la universidad francisco de paula santander durante el segundo semestre del 2019 diseño y aplicación de un programa de intervención en seguridad y salud en el trabajo, basado en los factores de riesgos laborales, en salones de belleza / peluquerías de cúcuta 2019 autoconcepto en adolescentes una mirada desde la migración - ii semestre de 2018 y i semestre de 2019 construcción de un sistema automatizado para conformar equipos de trabajo definición de los parámetros para el diseño de un prototipo clasificador de tipos de mente beneficios del pensamiento triádico en los estudiantes de ingeniería mecánica de la universidad francisco de paula santander, ocaña identificación del tipo de mente de los estudiantes de primer semestre de ingeniería civil mediante el pensamiento tríadico en la universidad francisco de paula santander ocaña límites a la libertad de prensa en el municipio de ocaña, norte de santander dificultades de aprendizaje alrededor del algebra elemental en estudiantes de octavo grado actitudes y creencias de estudiantes de matemáticas y su correlación con el uso de las tic análisis de optimización topológica aplicada a espacios arquitectónicos. diseño desde la teoría de grafos enseñanza del concepto de derivada: una propuesta desde la ingeniería didáctica fortalecimiento del programa de prevención de la violencia escolar e intrafamiliar a través de la ejecución del proyecto mediadores en resolución de conflictos perteneciente a la casa de justicia barrio la libertad en las instituciones educativas simón bolívar y misael pastrana borrero de san josé de cúcuta incidencia en la seguridad personal frente a la regulación de los delitos informáticos en la universidad de pamplona sede villa del rosario política de participación social en salud (ppss) desde las competencias ciudadanas como herramienta para la gestión pública de programas y servicios de la e.s.e hospital universitario erasmo meoz representaciones gráficas de una función, ¿ayuda o problema en los jóvenes universitarios? una mirada al contexto penitenciario de las fuerzas militares, estudio de caso: trigésima brigada del ejército nacional de colombia (brigada treinta) felicidad y autoestima como bases esenciales para el desarrollo personal de los estudiantes del colegio universitario san carlos factores que influyen en el bienestar y satifaccion en la vida de los inmigrantes en la zona de frontera estrés laboral en las madres cabezas de hogar vinculadas al comercio informal en cúcuta norte de santander diseño de un estetoscopio digital para el análisis de taquicardia supraventricular analisis de calidad en el ciclo combinado buscando aprovechar el calor residual y control de agentes contaminantes analisis de estructuras de disipacion de energia para mitigar el impacto producido por flujo de avalanchas análisis del desempeño mecánico y de porosidad de una matriz de concreto reforzado con diferentes porcentajes de fibras de tereftalato de polietileno (pet) reciclado caracterizacion de las curvas de un motor de ignicion por compresion a diferentes factores de operación caracterizacion de sistemas de desarrollo esp32 para adquisicion de datos caracterización termo-física y mecánica de un cemento geopolimérico a base de cenizas volantes para diferentes relaciones si/al control de conmutación de baterías para un sistema de carga y descarga elaboración de un pan funcional a partir de harina de centeno (secale cereale) con adición de cúrcuma (curcuma longa) evaluación de la eficiencia de un sistema de refrigeración que opera con distintos refrigerantes evaluación de las propiedades mecánicas, morfológicas y estructurales de tabletas cerámicas con y sin recubrimiento de magnetita usando proyección térmica oxiacetilanica prototipo de cerradura electrónica para el control de acceso mediante huella dactilar y rfid prototipo electrónico para la actualización del sistema de desarrollo "de lorenzo dl3155e24" recubrimientos de poliestireno postconsumo para modificacion de tension superficial 547 rediseño y simulación del rodete y los alabes de la turbina pelton de la universidad francisco de paula santander sistema de cultivo hidropónico semiautónomo diseño e implementación de un sistema de caracterización de un transistor fet con interfaz gráfica de usuario en matlab sistema integrado de desplazamiento entre zanjas basado en sistemas embedidos diseño e implementacion de un sistema de caracterización de dispositivos electrónicos de tres terminales para la medición de la capacitancias internas cπ y cμ caracterización de genes productores de proteasas y quitinasas de hongos entomopatógenos aislados de suelo a caracterización fisicoquimica del raquis de palma de aceite para su aplicación en el uso de nuevos productos agroindustriales efecto de la adición de concentrado autólogo de plaquetas sobre las subpoblaciones espermáticas en semen ovino remocion de coliformes totales y fecales presentes en agua mediante la aplicación de nano particulas de plata tratamiento de aguas contaminadas con glifosato utilizando electrocoagulación utilización de tierras diatomáceas recicladas de la industria cervecera como medio de transporte de macronutrientes estandarización de procesos administrativos y operativos en la fabricación de productos textiles bajo el paradigma de los manuales de procedimientos factores de apoyo social en los pacientes con trastorno bipolar, episodio depresivo sin síntomas psicóticos, en una clínica de la ciudad en el último trimestre del año 2018 selección de un nuevo material refractario determinación del efecto de los fragmentos de bosque urbano sobre el co2 producido por las fuentes móviles en el municipio de ocaña norte de santander desarrollo de una mezcla asfáltica reciclada (rap) en cúcuta analisis comparativo de los tipos de pretratamientos usados en el bagazo de la caña de azúcar diseño de un modelo de gestion de logistica inversa en el sector de muebles en la ciudad de san jose de cúcuta y el área metropolitana identificación de la avifauna, tomando como criterio taxonómico el canto influencia del uso del grano de caucho triturado (gcr) sobre la resistencia bajo carga monotónica en una mezcla drenante caracterización morfológica y térmica de cerámica plastica modelado de la gestión del conocimiento en docencia universitaria empleando dinámica de sistemas desarrollo de un sistema de supervisión de las variables de temperatura, presión y humedad en un biodigestor con el fin de visualizar el balance de energía de la ufpso diseño de la estrategia de control de una celda electrolítica para producir hho como combustible complementario desarrollo de un sistema automatizado para el banco de prueba de soldadura mig modelo numérico de detección de fugas para sistema de tuberias evaluación de un sistema de comunicaciones óptico modulado en desplazamiento de fase empleando multiplexación por división de frecuencia estrategias de producción limpia para las empresas del sector cerámico del área metropolitana de cúcuta aplicación móvil de reconocimiento óptico de caracteres (ocr) en el proceso de tabulación de registro de información de la asociación de padres de hogares comunitarios de bienestar familiar de la comuna siete de san josé de cúcuta análisis de volátiles en el proceso de fermentado de cacao, mediante el uso de una matriz multisensorial o nariz electrónica para el control de calidad del producto en norte de santander cúcuta procesamiento de datos implementado python para identificar clúster asociados a muestras de cacao seco sano e infectado con monilia en norte de santander análisis de la estructura intelectual y la evolución de la investigación en el concepto de universidad inteligente: un análisis bibliométrico modelado 3d aplicado a las plantas del vivero de la universidad francisco de paula santander ocaña análisis y control de humedad del suelo a través de un sistema soportado por sensores en el jardín botánico "jorge quintero arenas" de la universidad francisco de paula santander ocaña portable energy: desarrollo de un multigenerador eléctrico portátil a base de energía fotovoltaica y energía cinética efecto de la polaridad del solvente durante la electrodeposición de asfaltenos de petroleo extrapesado colombiano en presencia de un campo magnético y nanoparticulas magnéticas determinación del índice de compresión a partir de propiedades de plasticidad en los suelos cohesivos residuales de la ciudad de ocaña, norte de santander modelo dinámico lineal y no lineal de un dedo robótico para una prótesis de mano análisis y modelación del transito vehicular en las intersecciones semaforizadas de la avenida 10 del municipio de los patios, colombia gestion del alcance en proyectos de desarrollo de software desarrollo de una aplicación web para la asignación de citas, historias clínicas y facturación utilizando la metodología cmmi (capability maturity model integration) para el hospital de los patios técnicas de medición y análisis del fenómeno de envejecimiento en asfaltos y mezclas asfálticas análisis técnico y económico para evaluación de pavimento flexible entre método convencional y nueva tecnología desarrollo de un sistema embebido configurable para la adquisicíon y monitoreo de un proceso termico – neumatico utilizando una plataforma raspberry pi métodos para la recuperación de aceites lubricantes automotrices usados: revisión del estado de arte propuesta metodologica para la optimizacion de la producción en pequeñas empresas mineras de carbon en norte de santander diseño de un sistema de perfilación de férulas mediante el escaneo 3d de muñeca, brazo y tobillo para fines de impresión 3d evaluación de parámetros mecánicos y de durabilidad de una mezcla asfáltica tipo mdc-19 con inclusión de chamota como reemplazo en agregados de 3/8" simulación computacional del proceso de alivio de tensiones residuales en cilindros para glp identificación del tipo de mente de los estudiantes de primer semestre de ingeniería civil mediante el pensamiento tríadico en la universidad francisco de paula santander ocaña desarrollo e implementación con herramientas tecnológicas de la información y comunicación (tic) para dar solución a requerimiento a diferentes sectores empresariales recuperación de oro desde minerales refractarios auroargentíferos usando una bacteria nativa químicamente compatible con acidithiobacillus ferrooxidans bancas paramétricas [diseño generativo de mobiliario] validación del modelo matemático de una bomba centrífuga barnes de 0.25 hp análisis de componentes principales en cromatogramas para diagnósticar cáncer de próstata análisis de las redes neuronales artificiales en función de base radial para ser empleadas en la extracción de bordes de imágenes aéreas análisis y estimación de la radiación solar en la ciudad de cúcuta usando estadística inferencial aplicación web para la administración de la infraestructura de red y telecomunicaciones del campus central de la universidad francisco de paula santander en la sede cucuta determinación del índice de compresión a través de las propiedades de plasticidad de los suelos de la ciudad de ocaña, norte de santander caracterización del docente y el estudiante de educación superior en la planificación, dinámica de la clase y evaluación caracterización física y funcional del intercambiador de calor con fines de detección y diagnostico de fallos competencias gerenciales de los gerentes de las empresas de del sector ladrillero de villa del rosario como ventaja competitiva comunicación vía bluetooth para la emulación del control de un sistema de iluminación en proteus professional 8.1 a través de una aplicación móvil desarrollo de un prototipo mecatrónico con realimentación háptica para un simulador de actividades de entrenamiento de la cirugía laparoscópica en animales caninos diagnóstico y análisis del impacto social del uso de dos tipos de infraestructura de vivienda de tipo horizontal en poblaciones vulnerables caso de estudio, cúcuta, colombia diseño de envolventes arquitectónicas paramétricas diseño de un sistema de emulación de movimiento robotizado de mano de bajo costo diseño de un sistema de medición de material particulado mediante un vehículo aéreo no tripulado diseño de un sistema de percepción del impacto de choques mecánicos y golpes en el cerebro dureza de recubrimientos de si-ti-zr fabricados por la técnica de sol-gel sobre sustratos de aluminio aa2024-t3 efecto del número de reynolds sobre la relación de coeficientes aerodinámicos de un aerogenerador sin aspas amplificador electrónico portátil con energía solar para el análisis de la variabilidad de la frecuencia cardiaca en campo estimación de la radiación solar utilizando redes de neuronas artificiales autoreparación del concreto y el impacto en el futuro de las construcciones evaluation of the use of biomaterials for the manufacture of biodegradable films alternatives for critical points of vehicular accident according to statistical analysis estudio de patología para la rehabilitación del teatro juan atalaya en san josé de cúcuta, colombia estudio de seguridad vial mediante la implementación de comparendos por medios técnicos y tecnológicos en la autopista san antonio, villa del rosario, colombia evaluación estimada de derrames de crudo ocasionados por acciones subversivas al oleoducto caño limón coveñas experiencias significativas en los procesos de movilidad académica en un programa de ingeniería industrial factores de riesgo de la desercion estudiantil del programa de ingenieria industrial en una universidad publica gerencia creativa para el desarrollo del marketing social gestión del riesgo frente a movimientos telúricos en construcción de edificaciones en san josé de cúcuta impacto socioeconómico y nivel de emprendimiento en los graduados de un programa de ingeniería industrial la educación inclusiva y las tecnologías en las prácticas pedagógicas medición de parámetros en líneas de transmisión con sistemas embebidos metodología del cálculo de la exergía en la chimenea de una caldera pirotubular de 10bhp metodología para la selección de perfiles aerodinámicos de aerogeneradores a bajo número de reynolds microstructure and morphology of wc-18co coatings obtained by thermal spray by flame modelo de simulación de eventos discretos, para mejorar los tiempos de espera en los servicios de urgencias de un hospital público modelo matematico de un intercambiador de calor tipo tubo y coraza pbx ip como herramienta de integración de servicios de comunicaciones para la ufps basado en las mejores prácticas de itil percepción empresarial del impacto de los trabajos de grado desarrollados por un programa de ingeniería industrial en el área metropolitana de cúcuta plataforma web para la gestión de protección y adopción de animales en condición de calle en la ciudad de cúcuta y su área metropolitana predicción del precio del petróleo mediante redes de neuronas artificiales propuesta de mejoramiento de las zonas de estacionamiento vehicular y de motos de la ufps cúcuta empleando simulación prototipo para control de asistencia académica de manera remota con tecnología rfid resistencia a la compresion de concretos con adicion parcial de polietileno de alta densidad simulación bidimensional del flujo de aire sobre un perfil aerodinámico sg6043 a bajos números de reynolds mediante la simulación computacional simulación de un alabe de aerogenerador para bajas potencias y velocidades software de registro de asistencia usando mecanismos de hardware libre con comunicación nfc "agile sheduling" generación automática de la planificación de la entrega "release planing" asignación de historias de usuario a los desarrolladores usando algoritmos genéticos la tecnología una alternativa creativa en el proceso enseñanza- aprendizaje en los deportes sobre ruedas caracterización espectroscópica y fisicoquímica de la gulupa passiflora edulis sims de la provincia de pamplona, norte de santander asociación entre el conocimiento de los factores de riesgo y las condiciones de salud vocal en docentes universitarios ansiedad, depresión y autoconcepto en mujeres diagnósticadas con cáncer de mama autoconcepto en adolescentes una mirada desde la migración - ii semestre de 2018 y i semestre de 2019 estilos de vida en jóvenes estudiantes de fisioterapia de dos universidades de bucaramanga, colombia diseño y aplicación de un programa de intervención en seguridad y salud en el trabajo, basado en los factores de riesgos laborales, en salones de belleza / peluquerías de cúcuta 2019 impacto del programa cuidado de enfermería a las puérperas y su recién nacido egresados de una institución de salud del municipio de cúcuta decálogo de seguridad vial para la disminución de los riesgo en los usuarios viales en una empresa ubicada en la intervención pedagógica mediada por las tics en la enseñanza y el aprendizaje del cuidado de personas con enfermedad crónica cuidado humanizado de enfermería desde la experiencia de los pacientes: metasíntesis en búsqueda de la humanización de la unidad de cuidados intensivos nivel de conocimiento sobre sífilis gestacional en mujeres gestantes que asisten a la unidad básica de comuneros, en el segundo trimestre del año 2019 la espiritualidad de los cuidadores en el contexto de la alta complejidad memoria histórica en los trabajadores de salud en la zona del catatumbo, un abordaje desde la bioética para la deliberación descripción del uso tradicional de plantas medicinales en el mercado del municipio de sardinata, norte de santander prevalencia de molestias osteomusculares y calidad de vida laboral en el personal de enfermería de un centro quirúrgico de la ciudad de cúcuta en el primer semestre de 2019 perfil cognitivo de los pacientes con trastorno afectivo bipolar activo y en remisión en el hospital mental rudesindo soto en el segundo trimestre del 2019 perspectiva del cuidador entrenado en pacientes con enfermedad renal cronica desde tres dimensiones estado serológico igg e igm frente a toxoplasma gondii y factores de riesgo relacionados, en gestantes de primer trimestre atendidas instituciones de salud de cúcuta, colombia análisis dimensional del riesgo percibido por la exposición a radiaciones ionizantes del activo intangible del sector salud ; International scientific commiteeI Prof. Ricardo Santiago Puca Molina Universidad Nacional de la Patagonia Austral, Argentina Prof. William J. Ugarte Guevara Universidad de Uppsala, Suecia Prof. Antoni Bosch Pujol Universidad Autónoma de Madrid, España Prof. Libardo Flórez Villamizar Universidad Pedagógica Experimental Libertador, Venezuela Prof. Jimmy Jefferson Túllume Salazar Gerente General - ICACIT / Coordinador IEEE YP Region 9, Perú Prof. Maura Olivia García Pineda Universidad Tecnológica de Querétaro, México Prof. Carlos Humberto Sierra Becerra Universidad Autónoma del Estado de Morelos, México Prof. Ramona Moliné Escanilla Institute of Audit and IT-Governance Prof. Anderson Sandoval Amador Universidad Nacional del centro de la provincia de Buenos Aires, Argentina Prof. Ely Dannier V. Niño Basque Center on Materials, Applications and Nanostructures (BCMaterials), Leioa, Spain; Fundation of Researchers in Science and Technology of Materials, Colombia. ; National scientific commitee Prof. Octavio Andrés González Estrada Universidad Industrial de Santander, Bucaramanga Prof. Fredy Humberto Vera Rivera Universidad Francisco de Paula Santander, San José de Cúcuta Prof. Oscar Javier Rodríguez Riveros IEEE Colombia / Universidad de San Buenaventura, Bogotá D.C. Prof. Elkín Gélvez Almeida Universidad Simón Bolívar, San José de Cúcuta Prof. José José Barba Ortega Universidad Nacional de Colombia, Bogotá D.C. Prof. Hugo Fernando Castro Silva Universidad Pedagógica y Tecnológica de Colombia, Tunja Prof. Nelson Afanador García Universidad Francisco de Paula Santander seccional Ocaña ; Organizing commitee Universidad Francisco de Paula Santander- UFPS Jhan Piero Rojas Suarez Olga Marina Vega Angarita Judith Del Pilar Rodriguez Tenjo Liliana Marcela Bastos Osorio Nydia María Rincón Villamizar Mawency Vergel Ortega Edwin Alberto Murillo Ruiz Giovanni Mauricio Baez Sandoval Gloria Esperanza Zambrano Plata Jessica Lorena Leal Pabón Marling Carolina Cordero Díaz Andrea Cacique Dixon Alirio García Carrillo Universidad Francisco de Paula Santander - Seccional Ocaña Torcoroma Velasquez Perez Ana Melissa Rodríguez Chinchilla Lady Sánchez Jácome Nelson Fernando Gaona Díaz Didier Camilo Gaona Sánchez ; 6th ed

La popolazione mondiale è in continua espansione e la crescita demografica ed economica inducono allo sfruttamento progressivo dell'ambiente ed al depauperamento delle risorse naturali (acqua ed energia in particolare), con conseguenti impatti potenzialmente importanti sul cambiamento globale. Si rende, pertanto, necessaria ed urgente una più efficiente gestione delle risorse basata sulla rielaborazione di obiettivi sostenibili di politiche e strategie ambientali e sulla riduzione del consumo delle risorse, promuovendo la transizione da un modello di economia lineare ad uno circolare, costituito da un ciclo continuo di sviluppo positivo che preserva e migliora il capitale naturale, ottimizzando l'utilizzo delle risorse a tutte le scale. Come noto, l'Ingegneria Naturalistica (IN) utilizza le piante come materiale da costruzione nelle opere per la riqualificazione ambientale e paesaggistica del territorio. Le opere di IN sono infatti a basso impatto ambientale ed in grado di innescare processi di rinaturalizzazione che favoriscono la biodiversità, offrendo una promettente strategia di mitigazione e adattamento ai cambiamenti climatici. Fondamentale per il raggiungimento di questi obiettivi, risulta essere quindi l'uso di materiali adeguati, sostenibili, di facile reperimento e basso costo. Tenuto conto della grande disponibilità dei residui derivanti dalla potatura annuale delle viti (sarmenti) e dallo spiaggiamento annuale delle foglie di Posidonia oceanica (banquette) in Sicilia, la presente tesi ha come obiettivo principale la descrizione e l'analisi di questi nuovi materiali organici di scarto in relazione alla possibilità di uso degli stessi in opere di Ingegneria Naturalistica. Ogni anno infatti la potatura dei vigneti produce un elevato quantitativo di residui (sarmenti), che rappresentano una biomassa da smaltire; nel contempo, il fenomeno dello spiaggiamento dei residui di P. oceanica è percepito come un disagio dai cittadini, entrando in conflitto con alcune attività economiche (turismo, stabilimenti balneari, ecc). Nonostante il fondamentale ruolo ecologico che rivestono le fanerogame marine sia per limitare l'erosione della costa che per favorire la formazione del sistema dunale costiero, la presenza di residui di P. oceanica lungo la costa può comportare la riduzione del valore turistico delle spiagge; conseguentemente è richiesta alle amministrazioni locali la rimozione delle banquette ed il loro conferimento in discarica. L'utilizzo della biomassa prodotta comporta quindi un duplice vantaggio: la risoluzione del problema dello smaltimento dei residui prodotti e la creazione di nuovi prodotti, locali ed a basso costo, riutilizzabili anche nel campo del risanamento ambientale. La biomassa residuale viene vista in questo modo come una risorsa e non più un rifiuto, acquisendo un valore sia dal punto di vista ecologico che dal punto di vista economico Nell'ottica dell'economia circolare, i sarmenti sono stati assemblati in forma di fascina per costituire l'elemento base per realizzare il modulo di una fascinata, opera lineare di IN con funzioni antierosive, consolidanti e di stabilizzazione, mentre, i residui di P. oceanica sono stati utilizzati come substrato di coltivazione per rendere "viva" l'opera dopo la messa a dimora di specie autoctone al suo interno. Nella tesi sono state eseguite una serie di analisi e sperimentazioni volte: i) a caratterizzare i due materiali per valutarne l'idoneità come costituenti della fascina, ii) ad individuare le specie vegetali biotecnicamente più idonee a rendere viva l'opera, iii) ad eseguire una prima valutazione sulla funzionalità dell'opera nel suo insieme utilizzando osservazioni fatte su un piccolo prototipo di fascinata messa in opera nei campi sperimentali dell'Università di Palermo. Viene infine presentata una tecnica costruttiva innovativa delle fascinate oggetto di brevettazione da parte dell'Università degli Studi di Palermo e sviluppata nel corso delle attività di questo dottorato di ricerca. Con l'obiettivo di stimare indicatori di resistenza e durabilità delle fascine sperimentali sono state, in primo luogo, individuate quattro aziende vitivinicole che operano nel territorio siciliano, disponibili a fornire a titolo gratuito i sarmenti appena potati. Le prove meccaniche di resistenza a flessione (valutazione di tensioni di rottura e modulo di elasticità) sono state quindi eseguite su 122 provini di 8 differenti cultivar di sarmento (Cabernet, Inzolia, Nero d'Avola, Grecanico, Grillo, Chardonnay, Sirah e Catarratto). I provini di sarmento, di lunghezza L=10 cm ed umidità "normale" (12%), sono stati selezionati con criterio di assenza di nodi ed imperfezioni, uniformità di diametro ed asse longitudinale rettilineo (cilindricità). Sotto l'ipotesi di validità della legge di Hook, le prove di resistenza a flessione eseguite secondo lo schema a tre punti (3 point bending test) sino alla rottura delle fibre inferiori dei provini, hanno permesso di ricavare il modulo di elasticità longitudinale (lungo le fibre), E, e la tensione di rottura sulla base dei diagrammi sforzo/deformazione e della forza a rottura. Dai primi risultati si rileva come i vitigni Cabernet, Grillo e Sirah presentino le migliori caratteristiche di resistenza flessionale (maggiore rigidità) con netta prevalenza del Sirah (4878.6 MPa), mentre più deformabili risultano essere i sarmenti di Grecanico, Chardonnay, Catarratto e Nero d'Avola (1200 - 2000 MPa). I valori maggiori di tensioni di rottura si riscontrano invece per il Cabernet (70 MPa). Nel complesso, mettendo in relazione le tensioni di rottura campionarie ai corrispondenti moduli di elasticità, le migliori caratteristiche di resistenza e di maggiore durabilità riscontrate sono quelle del Cabernet e dello Chardonnay, che possono quindi trovare potenziale impiego come materiale da costruzione nelle opere di Ingegneria Naturalistica. Pertanto, i sarmenti di Cabernet sono stati utilizzati per il confezionamento delle fascine nell'installazione sperimentale, insieme al Catarratto che è la cultivar maggiormente coltivata nella regione e che, conseguentemente, produce il maggior quantitativo di biomassa annuale. L'area di prelievo dei residui di P. oceanica è stata individuata nella costa prospicente l'abitato di Custonaci in provincia di Trapani. La banquette dalla quale sono stati prelevati i residui presenta un'altezza di 4 m e si estende per centinaia di metri lungo la costa rocciosa alle spalle di Monte Cofano. I residui di P. oceanica spiaggiata sono stati rimossi meccanicamente e depositati in un'area di stoccaggio appositamente realizzata nel vicino Parco Sub urbano di Custonaci. Allo scopo di valutare l'abbattimento della salinità a mezzo dilavamento naturale è stato studiato il processo di infiltrazione che si attua nei residui di P. oceanica accumulata nei siti di stoccaggio. Un contributo alla caratterizzazione idrologica dei residui di P. oceanica è stato fornito eseguendo una sperimentazione su campioni di residui sottoposti ad una pioggia di fissata intensità, al fine di mettere a punto un modello semplificato di infiltrazione, valido per ammassi porosi altamente permeabili. Più precisamente il modello di infiltrazione a base fisica adottato stima il tempo di ritardo, (o di primo gocciolamento) ovvero il tempo necessario affinchè il fronte di umidità, a partire dall'inizio dell'evento piovoso, raggiunga la base dell'ammasso. Il protocollo di sperimentazione è stato studiato in modo da variare progressivamente le condizioni iniziali di umidità sullo stesso campione così da non alterare le caratteristiche fisiche del campione stesso rendendo omogenei i risultati. I campioni di residui di P. oceanica, preparati in laboratorio con una densità apparente, pari a quella misurata su campioni indisturbati nel sito di stoccaggio, sono stati posti in anelli metallici di diametro, D = 200 mm liberamente drenanti al fondo, chiusi con tessuto non tessuto e rete metallica di contenimento. Le prove di infiltrazione sono state condotte con un simulatore di pioggia di diametro pari a quello degli anelli, alimentato con una bottiglia di Mariotte (pressione costante). Nella sequenza delle prove le condizioni iniziali di umidità sono variate da 0.030 a 0.197, mentre il volume drenato, si è incrementato da 0.030 a 0.32. La condizione iniziale di umidità ha influenzato i tempi di ritardo che sono passati dai 3.87 minuti della prima prova ai 13.62 minuti dell'ultima prova. La densità apparente, stimata empiricamente in funzione dell'altezza H del campione, ha mostrato una variazione, da 0.130 a 0.140 g/cm3 che ha comportato una riduzione della porosità. Dalle prove eseguite è emerso come la compattazione dei residui di Posidonia abbia giocato un ruolo determinante durante il processo di infiltrazione. Sulla base di questa osservazione il modello teorico di infiltrazione adottato, valido su mezzi altamente porosi ma a porosità costante, è stato modificato introducendo sia l'effetto della compattazione che quello della parzializzazione della superficie effettivamente interessata dal processo di infiltrazione. La legge di infiltrazione tarata sui dati sperimentali per valori dell'intensità di pioggia variabili da i=20 a i=100 mm/h, per un ammasso di P. oceanica, messa a confronto con l'analoga legge di infiltrazione relativa ad un terreno con stesse caratteristiche idrologiche della P. oceanica, ha evidenziato in definitiva la differenza di comportamento dei due media. I residui di P. oceanica mostrano rispetto al terreno, tempi di ritardo molto brevi (infiltrazione veloce), poco variabili sia con l'intensità che con le condizioni iniziali di umidità. Per condizioni di umidità iniziale superiori a 0.15 i tempi di ritardo per il campione dei residui di P. oceanica tendono a crescere all'aumentare dell'umidità indicando, in questo campo, una lieve riduzione della permeabilità del mezzo. L'abbattimento della salinità nei residui di P. oceanica è stato valutato in laboratorio simulando in un campione un processo di lavaggio a pressione costante. I campioni di residui di P. oceanica appena spiaggiati mostrano un elevato valore di conducibilità elettrica (CE) iniziale nell'acqua di drenaggio ( 20 mS/cm) ed un rapido abbattimento del contenuto in sali già con i primi tre lavaggi unitari (di peso pari al peso del materiale dilavato). Gli ulteriori sei lavaggi hanno affinato la riduzione di CE fino al raggiungimento di valori accettabili all'utilizzo agricolo ( 2 mS/cm). Assunta una densità della P. oceanica pari a 0,1 g/cm3 un lavaggio unitario di un ammasso alto un metro corrisponde allora ad un volume d'acqua specifico di 100 mm. I valori estremi del processo di lavaggio dei residui appena spiaggiati sono stati confermati da analisi di salinità svolte secondo metodo standard con diluizione 1:20. L'abbattimento del contenuto salino dei residui di P. oceanica accumulati nel deposito all'aperto di Custonaci è avvenuto, in modo sostenibile, a mezzo di un dilavamento naturale durato poco più di un anno che ha ridotto il valore di CE a 2,8 mS/cm. Tale riduzione concorda con le sperimentazioni fatte, infatti, tenuto conto che la precipitazione media annua alla stazione pluviografica di S. Vito Lo Capo vale 474 mm e che lo spessore medio dell'ammasso è di 1 m, il deposito è stato soggetto a circa 6 lavaggi unitari che sono bastati per abbattere significativamente il valore di CE. Ulteriori lavaggi unitari applicati ad un campione di P. oceanica prelevato dal deposito hanno portato ad un CE pari a 1,8 mS/cm, dopo il primo lavaggio, che si è ridotto ulteriormente del 33,3% (CE=1,2 mS/cm) al terzo lavaggio unitario. L'individuazione delle specie vegetali biotecnicamente più idonee a rendere viva l'opera è stata condotta a mezzo di prove di resistenza a trazione, Tr, delle radici. Il prelievo delle specie vegetali autoctone da utilizzare per rendere vive le fascine è stato eseguito in 5 differenti stazioni nella provincia di Palermo. Gli elevati valori di tensioni di rottura delle radici delle specie vegetali prese in esame nello studio (A. mauritanicus, O. miliaceum, H. coronarium. M. lupulina, L. spartum, B. distachyon, R. officinalis, R. coriaria e S. junceum) confermano la loro adeguatezza nel campo del ripristino ambientale, della stabilizzazione dei versanti e nella prevenzione delle frane. In particolare S. junceum ha mostrato le migliori caratteristiche biotecniche in termini di legge tensioni/diametri e quindi è stato individuato come materiale da utilizzare preferibilmente per rendere vive le fascine. Da un'analisi più approfondita delle radici di S. junceum che crescono nelle due differenti giaciture di piano e di pendenza (22°- 28°- 40°), è stato possibile evidenziare come la giacitura in pendenza influenzi significativamente sia l'architettura complessiva del sistema radicale che lo stato tensionale dello stesso. L'indagine è stata eseguita in tre siti di prelievo (A, B e C) tutti in provincia di Palermo Nelle prove di trazione effettuate, in accordo con il maggiore sviluppo e la differente architettura radicale, i campioni di S. junceum prelevati in giacitura di pendenza hanno presentato i valori di tensione a rottura mediamente più alti. In corrispondenza dei diametri più bassi (0,5 mm) i valori di tensione a rottura sono risultati molto simili (61-70 MPa) nelle due giaciture mentre in corrispondenza dei diametri maggiori (>1 mm) la tensione a rottura dei campioni in piano risulta minore rispetto ai campioni in pendenza. Il test di covarianza (ANCOVA) applicato al campione delle tensioni di rottura con covariata il Diametro e variabili indipendenti il sito (A, B, C) e la giacitura (piano, pendenza) ha permesso di considerare non significativa la differenza tra i siti (suoli) e significativa la differenza tra le due giaciture. Nell'installazione delle fascine sperimentali si è stimata la crescita delle piantine in fitocella di S. junceum messe a dimora in diversi substrati. Dalle prime evidenze le piante cresciute sul substrato costituito dai residui di P. oceanica hanno presentato la maggior percentuale di attecchimento e la maggiore crescita epigea. Tale risultato può essere, con buona probabilità, attribuito alle proprietà fisiche ed alla capacità isolante dei residui. Difatti, la maggiore capacità drenante del substrato costituito dai residui di P. oceanica, rilevato durante le prove di infiltrazione, sembra aver giocato un ruolo positivo nell'attecchimento e sviluppo della pianta. Il controllo del microclima all'interno delle fascine è stato eseguito con misure di temperatura rilevate ad intervalli di 30 minuti da sensori hobo data logger inseriti ad una profondità di 5 cm, lasciati indisturbati per tutta la durata delle misure (dal 14.07.2017 al 20.11.2017). I dati sono stati misurati: a) nell'ambiente atmosferico, b) all'interno dei residui di P. oceanica contenuti nelle fascine e c) nel terreno contiguo all'istallazione. In totale sono stati raccolti 6201 valori di temperatura per ognuno dei tre sensori. Le misure di temperatura hanno evidenziato l'elevata capacità isolante dei residui di P. oceanica che si è manifestata con una significativa attenuazione, a livello dell'apparato radicale, delle temperature massime (36.6°C) nei residui di Posidonia e minime giornaliere (9.7°C), rispetto alle temperature massime (55.1°C) e minime (5.6°C) misurate nell'ambiente esterno nei due periodi considerati (estate e autunno). Le temperature medie più basse si sono registrate nei residui di Posidonia all'interno delle fascine, sia nel periodo estivo (25.7±3.6) che nell'arco temporale delle misure (21.8±5.2). È interessante osservare come il ruolo che tale materiale ha nel campo dell'edilizia come isolante termico possa risultare di interesse anche nel campo della coltivazione di specie vegetali. Infine, la ricerca svolta nei tre anni di dottorato ed i risultati conseguiti hanno portato al miglioramento della tecnica di realizzazione della fascinata le cui metodologie sono oggetto di una domanda di brevetto depositata dall'Università di Palermo. I vantaggi della nuova metodologia rispetto alle tecnologie attuali, possono sintetizzarsi come segue: • Riutilizzo sostenibile di materiali organici di scarto (sarmenti e P. oceanica spiaggiata e dilavata) con conseguente economia di realizzazione di una fascinata (opera I.N. lineare di consolidamento e protezione idrogeologica). • Meccanizzazione della produzione dei manufatti modulari (fascina) costituenti l'opera, che nell'attuale pratica prevede un assemblaggio solo di tipo manuale, con conseguente riduzione dei tempi di costruzione e dei costi ad esso associati. • Il prodotto proposto rende "strutturale", con un sistema di collegamento dei moduli, un'opera che staticamente non è resistente alle azioni di spinta delle terre. • Riduzione dei tempi di messa in opera del manufatto lineare. Con la tecnica innovativa avanzata, grazie alla caratteristica strutturale del manufatto, si potranno realizzare opere su più piani (non più di tre) o opere chiuse. I residui di potatura della vite ed i residui di P. oceanica sono stati utilizzati anche nell'ambito di un progetto, finanziato dalla Comunità Europea, al Comune di Custonaci dal titolo "Primi interventi finalizzati a contenere il fenomeno della desertificazione del territorio Comunale Parco sub-urbano Portella del Cerriolo". Recenti controlli di qualità dell'Unione Europea sulle opere realizzate con i suddetti materiali di scarto nel Parco sub-urbano Portella del Cerriolo a Custonaci, hanno evidenziato gli ottimi risultati raggiunti dal progetto. Per tale motivazione, La UE ha proposto la candidatura del suddetto progetto come best practices nell'area mediterranea per la lotta al fenomeno della desertificazione. L'uso dei due materiali, che rappresentano uno scarto di produzione agricola ed un rifiuto solido, ampiamente presenti sia in Sicilia che nella maggior parte dell'area mediterranea, si inquadra in un uso efficiente delle risorse (riuso sostenibile), nel risparmio economico ed energetico e nel pieno rispetto dell'ambiente. ; The world population is expanding continuously, and economic and demographic growth are leading to the exploitation of the environment and the reduction of natural resources (water and energy in particular), with potentially important impacts on global climate change. Therefore, more efficient management of resources is necessary, based on the reworking of sustainable objectives of environmental policies and strategies and lower consumption of resources, thus promoting the transition from a linear economy model to a circular one, consisting of a continuous positive development cycle that preserves and improves natural capital, optimizing the use of resources. Soil and Water Bioengineering uses plants as living building material in environmental and landscape development works. Such works with low environmental impact, promote biodiversity and, in addition, offer a promising strategy for mitigation and adaptation to climate change. Thus, the use of adequate, sustainable, easy to find and low-cost materials are essential for the achievement of these objectives. Considering the great availability of residues resulting from the annual pruning of vines and the annual cleaning of beaches from the leaves of Posidonia oceanica in Sicily, the aim of this thesis is to describe and apply innovative Soil and Water Bioengineering techniques that involve the construction of modular structures made with organic waste materials, namely, the residues of vine pruning (vine shoots) and beachside P. oceanica (banquette). In fact, every year, the pruning of vines produces high quantity residues (vine shoots), which represent a biomass to be disposed. At the same time, the beaching of P. oceanica residues is considered a problem by the population. It conflicts with a number of economic activities (tourism, bathing establishments, etc.). Even though seagrasses have a fundamental ecological role to play in limiting coastal erosion and promoting the formation of the coastal dune system, the presence of P. oceanica residues along the coast can reduce the tourism value of beaches. As a result, local authorities are required to remove banquette and dispose of them in landfills. Therefore, the use of this biomass has a double beneficial effect. It constitutes a solution to the problem of waste disposal and an opportunity for the creation of local and low-cost new products. Moreover, this waste can also be used in the field of environmental restoration. Therefore, the residual biomass considered a resource and no longer as waste, and has ecological and economic value. From the viewpoint of the circular economy, vine shoots were assembled in the form of fascines to constitute the basic element used to create a fascinate module, a linear Soil and Water Bioengineering work with anti-erosive, consolidation and stabilization functions, while the residues of P. oceanica were used as a growing medium to render the work "alive" after planting with native species. A series of analyses and experiments were carried within the framework of the thesis, in order to i) characterize both materials and evaluate their suitability as constituents of fascines, ii) identify the most biotechnically suitable plant species for rendering the work "alive", and iii) evaluate the functionality of the work as a whole using observations made on a small prototype of fascinate set up in experimental fields at the University of Palermo. Finally, an innovative fascinates construction technique is presented, which is the object of patenting by the University of Palermo and was developed during the activities of this research doctorate. First of all, we identified four wine-producing companies operating in Sicily and available to provide vine shoots just after pruning and free of charge. In order to estimate the durability of the experimental fascines, mechanical tests were carried out in the laboratory (tensile strength and modulus of elasticity) on 122 samples of 8 different vine shoot cultivars (Cabernet, Inzolia, Nero d' Avola, Grecanico, Grillo, Chardonnay, Sirah and Catarratto). The vine shoot samples, L=10 cm long and "normal" humidity (12%), were selected based on the criteria of absence of knots and imperfections, uniformity of diameter and straight longitudinal axis (cylindricality). The abiotic (mechanical) durability of the vine shoots was then estimated by means of flexural strength tests and measurement of tensile strength. Under the hypothesis of validity of Hook's law, flexural strength tests were carried out according to the three-point scheme up to the rupture of the lower fibres of the samples, which allowed to obtain the longitudinal elasticity modulus E (along the fibres) and the tensile strengthon the basis of the force/deformation diagram and tensile strength. The first results show that Cabernet, Grillo and Sirah vine shoots have the best flexural strength characteristics (greater rigidity) with a clear prevalence of Sirah (4878.6 MPa), while the vine shoots of Grecanico, Chardonnay, Catarratto and Nero d' Avola (1200 - 2000 MPa) are the most deformable. The highest values of tensile strength were found for the Cabernet (70 MPa). Consequently, by linking sample tensile strength to the corresponding elasticity modules, Cabernet and Chardonnay display the best resistance and durability characteristics, and could be used potentially as a building material in Soil and Water Bioengineering works. Therefore, Cabernet vine shoots have been suggested and used for the packaging of fascines in the experimental installation, together with Catarratto, which is the variety most cultivated in the region and, consequently, produces the largest quantity of annual biomass. P. oceanica residues were collected on the coast of Custonaci, Trapani (Southern of Italy). The "banquette" from which the residues were obtained is 4 metres high and extends hundreds of metres along the rocky coast behind Monte Cofano. P. oceanica residues were removed mechanically and deposited in a storage area created in the nearby Custonaci Park. In order to evaluate the reduction of salinity by natural runoff, the infiltration process that takes place in the residues of P. oceanica accumulated at the storage sites was studied. The investigation carried out on samples of P. oceanica residues subjected to rain of fixed intensity, allowed the development of a simplified theoretical model, valid for highly permeable porous storage. Furthermore, an analysis was performed in order to characterise P. oceanica residues from a physical and hydrological point of view and verify the applicability of a physical infiltration model for the estimation of delay time, starting from the beginning of the rainy event and ending with the storage site. The experimental protocol was studied in order to modify gradually the initial humidity conditions of the same sample and not modify the physical characteristics of the sample for the results to be homogeneous. The samples of P. oceanica residues, prepared in the laboratory with an apparent density equal to that measured on undisturbed samples at the storage site, were placed in metal rings, D = 200 mm, with free draining at the bottom, closed with non-textile and metal mesh containment. The infiltration tests were conducted with a rain simulator equal in diameter to that of the rings, and connected to a Mariotte bottle. In the test sequence, the initial humidity conditions varied from 0.030 to 0.197, while the drained volume increased from 0.030 to 0.32. Modification of the initial humidity condition had an effect on delay times. In particular, the times, with certain dispersion, increased by initial humidity conditions from the initial values of 3.87 minutes for the first test to 13.62 minutes for the last test. The apparent density empirically estimated as a function of the height H of the sample, showed a variation from 0.130g/cm3 to 0.140 g/cm3 which resulted in a reduction of porosity. The tests carried out showed that the compaction of P. oceanica residues played a decisive role during the infiltration process. Following this observation, the infiltration model on highly porous media was modified by introducing the effect of both compaction and that of the surface actually affected by the infiltration process. The infiltration law calibrated on the experimental data for rain intensity values varying from i=20 to i=100 mm/h, for P. oceanica storage, compared with the analogous infiltration law relative to soil with the same hydrological characteristics as stored P. oceanica. The difference in behaviour of the two media was revealed. P. oceanica residues show very short delay times in relation to soil (fast filtration); small differences are measured in the intensity and the initial humidity conditions. While the soil shows a typical monotonous reduction in delay times, for P. oceanica there is a slight increase in time after a given initial humidity condition, which indicates a slight reduction in permeability of the medium in this field. The reduction of salinity in P. oceanica residues was evaluated in the laboratory by means of a constant pressure washing process. P. oceanica residue samples show a high initial electrical conductivity (EC) value in drainage water (20 mS/cm) and a rapid reduction of the salt content with the first three unit washes. The six additional washings refined EC reduction to an acceptable level for agricultural use (2 mS/cm). The extreme values of the residue washing process were confirmed by salinity analysis using the standard method with dilution 1:20. The reduction of the salt content of P. oceanica residues was also achieved in a sustainable way by means of natural runoff in open storage for more than one year (≈ 500 mm/year of rain). The measurements taken at the first unit wash showed an EC of 1.8 mS/cm, which was reduced by 33.3% (CE=1.2 mS/cm) after the second unit wash. The most biotechnically suitable plant species were then identified to make the work "alive" by means of laboratory tests of Tr tensile strength of the roots. The native plant species used to make the fascine "alive" were collected at 5 different stations in the province of Palermo. The high tensile strength values of the roots of the plants considered in the study (A. mauritanicus, O. miliaceum, H. coronarium. M. lupulina, L. spartum, B. distachyon, R. officinalis, R. Coriaria and S. junceum) confirm their suitability in the field of environmental restoration, slope stabilization and landslide prevention. In particular, S. junceum displayed the best biotechnological characteristics in relation to the tension/diameter law and has therefore been identified as a material to be used for making fascine "alive". A more detailed analysis of the morphological parameters of S. junceum roots, growing at two different positions (plane and slope of 22°- 28°- 40°), showed that the position on the slope significantly influences the root system of the plant and the overall architecture of the root system at the three sampling sites (A, B and C). In the tensile strength tests carried out, in accordance with the greater development and the different radical architecture, the samples of break strength values taken in a slope position showed the highest break strength values. As regards the lowest diameters (0.5 mm), the break strength values are similar (61-70 MPa) in the two positions, while for larger diameters (2 mm) the break strength values of plane samples are lower than those of slope samples. In fact, they range from 20 MPa to almost 80 MPa at site A, 20 MPa to 50 MPa at site B, and 20 MPa to 40 MPa at site C. In the experimental installation, we estimated the growth of S. junceum planted in different substrates. The first evidence shows that the plants grown on the substrate consisting of P. oceanica residues showed the highest percentage of rooting and the greatest aerial growth (121.3 cm). This result can, most probably, be attributed to the physical properties and insulating capacity of the residues. In fact, the increased draining capacity of the substrate of P. oceanica residues, detected during infiltration tests, may have played a positive role in plant rooting and development. The micro-climate inside the fascines was estimated with temperature measurements using hobo data logger sensors inserted at a depth of 5 cm from 14.07.2017 to 20.11.2017, carried out continuously and with a time interval of 30 minutes. The data were recorded: a) in the external environment, b) inside the P. oceanica residues contained in fascines and c) in the land adjacent to the installation. A total of 6201 temperature values were collected by each of the three sensors. The temperature measurements showed the high insulating capacity of the P. oceanica residues, which manifested itself with a significant attenuation, at root level, of the maximum temperatures (36.6°C) in P. oceanica residues and daily minimum temperatures (9.7°C), compared to the maximum temperatures (55.1°C) and minimum temperatures (5.6°C) measured in the external environment during the two periods considered (summer and autumn). The lowest average temperatures were recorded in P. oceanica residues inside fascines, both in the summer period (25.7±3.6) and throughout the measurement period (21.8±5.2). It is interesting to note that the thermal insulation role of this material in the building industry also applies to agriculture. Finally, the research carried out during the three years of doctoral studies has led to the improvement of the fascinate production technique, and this methodology is subject to a patent application filed by the University of Palermo. The benefits of the new methodology compared to current technologies can be summarised as follows: • The proposed product makes "structural", with a module connection system, a work frequently used in Soil and Water Bioengineering that is not statically resistant to the actions of soil thrust. • Sustainable reuse of organic waste materials with consequent economy of construction. • Mechanisation of modular manufactured products, which in current practice provides for assembly only by hand with consequent reduction of construction time and costs. • Reduction of installation time for hydrogeological protection structures. The advanced innovative technique, to be developed with future experimental installations, has provided for the construction of a modular building made with eco-compatible materials at low cost; vine pruning residues (vine shoots) and Posidonia oceanica beaches (banquette). Vine pruning residues and P. oceanica residues were also used in a project, funded by the European Community, to the Municipality of Custonaci entitled " Primi interventi finalizzati a contenere il fenomeno della desertificazione del territorio Comunale Parco sub-urbano Portella del Cerriolo". European Union quality controls on these works has shown the excellent results achieved with the waste materials. For this reason, the EU has suggested project application as "best practices" in the mediterranean area for combating desertification. The use of these two materials, namely agricultural production waste and solid waste which are widely available in both in Sicily and most of the Mediterranean area, constitutes an efficient use of resources (sustainable use) that is low-cost, energy efficient and totally respects the environment.

Ego te provoco: algunas consideraciones preliminares.El continuo despliegue de potencias extra-regionales por el hemisferio ha adquirido nuevas connotaciones estos dos últimos años. En ambientes políticos, y comunidades epistémicas, han surgido visiones contrapuestas a la hora de evaluar estos despliegues. Por un lado, están quienes ven esta problemática de forma relativamente benigna y en lo medular acorde a las tendencias globalizantes que estarían abarcando todo el planeta sin excepciones de país, cultura, economía o sociedad. Por otro, están quienes matizan las intensidades y diferencian entre los objetivos buscados por una u otra potencia extra-regional. China, India, Rusia e Irán, los actores extra-regionales más activos, tendrían motivaciones distintas; y la receptividad también sería diferenciada. Sin embargo, en los nichos e intersticios por donde circula la influencia extra-regional queda al descubierto una característica común cual es la ausencia relativa del otrora omnipresente comportamiento de Estados Unidos.En este contexto, plagado de factores multidireccionales, es la penetración iraní la que suscita mayor atención. También es sobre la que hay menor información en fuentes públicas. Ello no ha sido óbice, sin embargo, para que, desde 2005 en adelante, ésta penetración sea no sólo ostensible sino creciente. En visibilidad y en complejidad.En efecto, Irán se está desplegando por América Latina a través de una hábil combinación de elementos propios de soft y del hard power. Emplea también una gama de otros elementos intermedios. Los énfasis de unos, o de otros, está relacionados no sólo con el diseño conceptual y praxis desplegada por Teherán, sino también con la receptividad que ha tenido en cada país de la región. De esta forma, se han generado tendencias que hacen de la relación de Irán con los países latinoamericanos un tema esencial de la agenda de seguridad hemisférica.Siguiendo a dos de los más prolíficos autores en esta materia, Román Ortiz y Ely Karmon, y teniendo en consideración el carácter complejo del diseño conceptual y la praxis de la penetración iraní, se sostiene la hipótesis general de que la principal motivación de los iraníes es la obtención de influencia en el "patio trasero de EEUU".Aunque el despliegue iraní se observa en la mayoría de los países del hemisferio, cinco sudamericanos son los que concentran mayor actividad (en orden alfabético): Argentina, Bolivia, Brasil, Ecuador y Venezuela. Con cada uno, se registra una relación multifacética y no desprovista de elementos sui generis, que poco o nada tienen que ver con los cánones tradicionales de las relaciones bilaterales. En consecuencia, identificar y problematizar estos elementos coadyuva en la muy intrincada tarea de desentrañar las razones por las que, por primera vez en su historia milenaria, los persas se muestran interesados en esta zona del mundo.Para alcanzar un foothold en América del Sur, el régimen iraní se procura diversos tipos de elementos categorizables en a) aquellos de poder suave (diplomacia pura y formal, lazos culturales inocuos, como el hermanamiento de ciudades, convenios universitarios y otros), b) elementos intermedios (apoyo material y espiritual a comunidades shií en la región, a mezquitas y centros religiosos) y c) elementos definitivamente duros (acuerdos militares o industriales vinculados a asuntos de seguridad y defensa o comerciales con dicha finalidad, o bien actividades encubiertas con grupos terroristas afines como Hizbollah). Denominador común de todos estos elementos es su ubicación en el contexto de una estrategia a prioridefinida.La vastedad de los elementos señalados, así como el fortísimo sigilo con que son ejecutados, ha llevado a que analistas y académicos privilegien dos posturas para entender su impacto; ambas benignas. En efecto, la mayoría las ve como algo irrelevante, por momentos incluso con cierta indiferencia, casi como un sub-producto de las excentricidades del régimen de los ayatollahs, mientras que en otros momentos, buscan asociarla a cierta inevitabilidad de los cambios en el escenario mundial y a la pérdida relativa de la influencia estadounidense en América del Sur. Sin embargo, ambas relativizan las verdaderas consecuencias y no dan cuenta de su naturaleza. Naturaleza y consecuencia van de la mano. La primera se entiende por su rasgo fundamental, cual es que toda la estrategia iraní está en manos del Pasdaran. Por cierto que ello no implica necesariamente que todas las consecuencias sean previsibles o inmediatas. Pero al ser el Pasdaran el principal instrumento de la penetración, no se puede sino asociar la penetración a los objetivos e imperativos estratégicos de Teherán, vale decir con los planes nucleares, con la competencia estratégica con EEUU, con la construcción de bases capaces de propinar golpes de represalia en el corazón mismo de Norteamérica y, last but no least, con el papel global asignado a la religión. En otras palabras, con la capacidad de disuasión iraní. Por lo mismo no es casualidad que los planes de desarrollo nuclear y misilístico estén bajo tuición del Pasdaran. Tampoco es casualidad que el despliegue esté tan estrechamente vinculado a su estrategia de promoción del fundamentalismo islámico y a la pretensión de aislar a Israel (1). Vista en el contexto de los imperativos estratégicos de Irán, la generación de complicidades con gobiernos afines es fundamental.En esta materia, el despliegue iraní en la región registra novedades generales y específicas a lo largo del bienio 2010-2011.Hannibal ante portas: Irán se despliega en América del SurCuasi de forma paralela a la gira del Presidente Barack Obama por Brasil, Chile y El Salvador en marzo de 2011, el Viceministro de Relaciones Exteriores iraní, Behrouz Kamalvandi realizó un periplo por Quito, Bogotá y La Paz. Pocas semanas más tarde, al iniciar junio de 2011, el influyente y controversial Ministro de Defensa iraní, Ahmed Vahidi, llegó a Caracas para desplazarse luego a La Paz. Asimismo, a fines de 2010, el régimen de Ahmedinejad destinó US$ 4.500 millones para esta nueva etapa de su despliegue en América del Sur (2).Esta verdadera proliferación de recursos económicos, políticos abiertos y encubiertos, así como diplomáticos indica que los énfasis de estos dos últimos años se han comenzado a vincular crecientemente con el poder duro. De acuerdo a las previsiones de Elías Eliaschev, durante 2011 se completará la designación de 150 cargos para el staff que se dedica a América Latina en general, y de esa masa de US$ 4.500 millones, ya se han empezado a ejecutar US$ 87 millones (una transferencia supervisada por el propio comandante general de las brigadas Quds, Qassem Soleimani), de los cuales, a su vez, siete milllones han ido directo a Hizbollah(3).Parece razonable entonces asumir la hipótesis de que el poder duro ha adquirido centralidad. Sin embargo, los ritmos e impulsos que vaya observando el despliegue iraní dependerá finalmente de los nioveles de receptividad de cada país sudamericano(4). Esta responde a necesidades y motivaciones específicas. De ahí que el despliegue deba tener también una atención relativa en aquellos elementos de poder blando y toda la gama intermedia. Los sucesos acaecidos en torno a la visita de Ahmed Vahidi a Bolivia, examinados infra, así como el objetivo de alcanzar pronto US$ 20 mil millones en inversiones diversas de Irán en la región, confirman esta necesidad que tendrá Irán de ir acomodando su estrategia a las citadas sensibilidades de cada país sudamericano.En cuanto a los elementos de poder suave, el más importante verificador de tendencia del despliegue está dado por el incremento de embajadas iraníes en la región. Teherán tenía hasta el 2007 (5) sólo cinco embajadas en América Latina; de ellas únicamente tres en América del Sur. Hacia el 2011, el número de legaciones con embajador residente ha crecido ostensiblemente. Once suman hasta mediados de 2011 las embajadas iraníes en América Latina. Un dato anexo es que salvo Guyana y Surinam, la diplomacia iraní mantiene legaciones en todos los países de la región, y la única donde no hay embajador residente es aquella en Paraguay. Sin embargo, las visitas a Asunción del embajador concurrente -desde Montevideo- tienen la inusual frecuencia de una por mes; sin contar las constantes visitas de personeros de gobierno a Asunción (6). Finalmente, dentro del ámbito de poder suave, destaca también el apoyo manifiesto expresado por los embajadores de los países integrantes del ALBA en Teherán el 16 de julio de 2010, reiterando el "derecho soberano de Irán para generar energía atómica y utilizarla para fines pacíficos". Declaración vista con satisfacción en Teherán ya que permite visualizar algunos signos homogéneos en la receptividad regional. Debe tenerse en consideración que en los asuntos concernientes al vínculo con Irán, son los países sudamericanos del ALBA (Venezuela y Bolivia) los que llevan la iniciativa (7).En definitiva, se trata de un bienio lleno de connotaciones de alto significado, de una tendencia in crescendo, que, sin embargo, podría terminar abruptamente si la enfermedad del Presidente venezolano eclipsa su protagonismo.a) Relatio in terrorem: ArgentinaLas relaciones argentino-iraníes, a lo largo de estos dos últimos años, siguieron muy fuertemente marcadas por las reverberaciones de los brutales atentados a la embajada israelí y contra la AMIA en 1992 y 1994, respectivamente (8).Antecedentes con poderosa significación fueron descritos y fundamentados por Pepe Eliaschev en el diario Perfil (26.3. 2011). El primero apunta a la propuesta de la Casa Rosada para negociar un acuerdo secreto entre los dos gobiernos para dejar de lado el proceso judicial que lleva a cabo el juez Alberto Nisman contra exdiplomáticos y altos funcionarios iraníes a cambio de un compromiso por mayor intercambio comercial (9). La revelación de este antecedente tuvo como resultado que la visita del canciller Hector Timmerman a Israel, anunciada para fines de marzo, estuvo a punto de ser cancelada debido al profundo malestar causado en el gobierno iraní. Declaraciones posteriores de la cancillería argentina, negando la propuesta, mitigaron el estado de crispación bilateral, y el canciller finalmente se desplazó a Jerusalén.Un segundo antecedente de alta significación, y que causó gran molestia en el juez Nisman, es la revelación de tareas de reclutamiento y recolección de fondos en Brasil por parte de Hizbollah, Hamas y Al Qaeda en la zona de la Triple Frontera, en las que el iraní Moshe Rabbani, sindicado como autor intelectual del ataque a la AMIA, es fundamental. Rabbani ha visitado ocasionalmente Brasil utilizando pasaporte falso (10). Para ahondar aún más la controversia, Rabbani participó en abril de 2011 en un programa de radio junto al activista kirchnerista Luis D´Elía negando la versión de sus viajes a Brasil. Anexo a esta problemática, durante el bienio continuó también la controversia en torno a las actividades de la embajada de Irán en Buenos Aires. El juez Rafael Rafecas, por ejemplo, denunció que desde esa legación se financia a muchas agrupaciones anti-judías y que el nexo es el activista pro-gubernativo Luis D´Elía (11).El intento de revertir el estado de deterioro generalizado que existe en las relaciones bilaterales, y que Eliaschev adjudica a la influencia del canciller Timmerman, ocurrió meses después de que la Presidenta Cristina Fernandez, hablando ante la Asamblea General de la ONU en septiembre de 2010, propusiera una solución a la Lockerbie, que comprendiera un proceso judicial a los iraníes acusados por el caso de la AMIA en un tercer país, por mutuo acuerdo entre Irán y Argentina (12). No queda muy claro la finalidad de la propuesta, ya que, como era dable esperar, provocó una agria carta respuesta de Irán dirigida al Presidente de la Asamblea General(13).Finalmente cabe consignar que en el plano comercial, a inicios de abril de 2011, se anunció que Teherán empezará a incrementar sus compras de soya. La iniciativa surgió no sólo por el interés de Irán sino por la baja de las exportaciones argentinas de este producto a la India para las que era necesario encontrar otro poder comprador (14).En suma, el bienio 2010-2011 ha servido para constatar que el vínculo iraní-argentino sigue alterado en sus cimientos (15). La intensidad de las reverberaciones que continúan emanando de los atentados a la embajada israelí y a la AMIA ponen necesariamente un signo de interrogación a la evolución ulterior que tenga este problema, cuya solución definitiva no se divisa. En tal sentido, el principal elemento a monitorear es la presunta oferta emanada de Teherán a mediados de julio orientada a re-tomar el diálogo.b) Dulce periculum: las tentaciones bolivianas El bienio 2010-2011 fue especialmente fructífero para la relación entre estos dos países. Mirado desde el punto de vista de la estrategia iraní, los antecedentes del período consolidaron a Bolivia, en términos cualitativos, como el segundo eslabón más importante en la región. Mirado desde la perspectiva boliviana, asistencia iraní en diversos ámbitos superó los US$ 1200 millones lo que convirtió a Irán en el segundo donante del país, superando a la Unión Europea (16).En el plano diplomático adquirieron relevancia varios hechos como la inauguración de la embajada iraní en La Paz, en septiembre de 2010, el viaje del Presidente Morales a Teherán un mes más tarde (17), y los desplazamientos realizados por varios altos personeros del gobierno iraní por territorio boliviano durante el primer semestre de 2011. Desde el punto de vista comunicacional, lo más destacado del viaje de Morales a Teherán y Tabriz, fue el anuncio de que Irán asistiría a Bolivia en la construcción de una planta de energía nuclear. Dado que el asunto carece de toda viabilidad debido al precario nivel de masa crítica existente en Bolivia respecto a esta materia, el anuncio adquiere singularidad. Desde ahora en adelante habrá movimientos, algunos visibles, otros menos, de especialistas y personeros vinculados a elementos de poder duro iraní. En este marco, fuertes sospechas tiene la aprobación de un proyecto de ley por el Congreso boliviano en junio de 2011, destinado a facilitar el turismo entre los dos países, ya que, pese a no existir cifras oficiales sobre el tema, todas las estimaciones apuntan a un flujo prácticamente inexistente.Otros dos elementos de poder duro son tanto la declaración conjunta emitida tras el viaje de Morales, en el sentido de que ambos países señalan a EEUU como enemigo común, como también el anuncio de crear un banco binacional que permitirá gestionar futuros proyectos. Esto último, ya se había visualizado un mes antes del viaje de Morales, cuando el ministro de Industrias y Minas de Irán, Ali Akhbar Mehravian asistió a la presentación de cartas credenciales del embajador Alireza Ghozeilee en La Paz, asunto que además, coincidió con la apertura física de la legación persa. La cartera del ministro constituyó una señal indicativa del énfasis que Irán está dando a este vínculo. Consecuentemente, durante la visita de Mahrebi, ambos países suscribieron acuerdos en materias de gas, petróleo y petroquímica. Además, Mahrebi inauguró las dependencias de la Iranian Oil en Santa Cruz y ofreció una nueva línea de crédito por US$ 254 millones que permitirá expandir los proyectos existentes y examinar nuevos proyectos en torno a la extracción del litio.Posteriormente, en marzo de 2011, la visita del Vicecanciller Behrouz Kamalvandi hizo anuncios que reforzaron el carácter estratégico que está asumiendo Bolivia en el despliegue iraní en la región. Kamalvandi anunció tanto la creación de un Centro Geocientífico, que se dedicará a estudiar datos geológicos de Bolivia, como de una red de transmisión y de antenas que permita crear un canal nacional de televisión. El objetivo central del Centro Geocientífico es localizar yacimientos de uranio. Hasta ahora, los estudios sobre localización y caraterísticas de depósitos uraníferos bolivianos son confusos, debido a su obsolescencia y poca acuciosidad. Uranio existiría en la Cordillera de Los Frailes, en Cotaje (Potosí) y en Mamonó, el este del país cerca d ela frontera con Brasil, en el Parque Noel Kempff Mercado y bajo el Bosque Seco Chiquitano (ambos forman el ecosistema El Pantanal). Tras la visita de Mehravian, la ministra boliviana de Planificación, Viviana Caro manifestó, "hay intenciones de realizar trabajos, pero lo que se necesita es una carta geológica actualizada en la que colaborará Irán" (18). Jorisch sostiene que el litio podría ser utilizado como un acelerador alternativo en el enriquecimiento de uranio. Durante su visita, Kamalvandi firmó acuerdos justamente para explotar litio (algo acordado inicialmente durante la visita de Ghozeilee)(19). Además, comprometió una línea de crédito adicional a la de US$ 270 millones ya existente para construir represas. Se trata de una línea crediticia abierta que se materializará apenas lo disponga el gobierno de Morales.Una significancia mayor tiene la llegada a Bolivia, en junio de 2011, del ministro de Defensa iraní, Ahmed Vahidi (20), quien visitó La Paz y Santa Cruz. Declaraciones de Vahidi ofreciendo todo tipo de ayuda militar que Bolivia demande y la invitación a la inauguración de la Escuela Militar del ALBA, ratifican la hipótesis sustentada acerca de la especificidad estratégica que tiene el despliegue iraní en Bolivia. Como trascendió por la prensa, Vahidi debió interrumpir su estadía en Bolivia, cuando fue detectado por el servicio de inteligencia argentino (SI) mientras se efectuaba una ceremonia en el Colegio Militar de Aviación (COLMILAV) en la que se entregaban licencias de pilotos a cadetes de Bolivia, Venezuela y Panamá. Ello motivó la rápida queja del gobierno de Cristina Fernández, quien advirtió al Presidente Morales sobre el retiro de la invitación que se le había cursado para que visitara Buenos Aires la semana siguiente (21). Bolivia presentó sus excusas al gobierno argentino, y ni Morales ni su ministra de Defensa, Cecilia Chacón se refirieron públicamente al incidente. Vahidi, sin comentarlo directamente, valoró positivamente su paso por Bolivia y reiteró que "la cooperación total con los países latinoamericanos goza de prioridad para Irán"(22).El carácter estratégico de Bolivia en el despliegue iraní en la región, había quedado esbozado en octubre de 2010, cuando el ministro de Economía y Finanzas de Bolivia, Luis Arce informó de un acuerdo entre los dos países para la compra de equipos militares iraníes, el mantenimiento de las aeronaves de la Fuerza Aérea Boliviana (FAB), así como un acuerdo para entrenamiento militar. Ese anuncio ministerial ocurrió dos semanas después que Morales llegara procedente de Teherán (23).En síntesis, la relación bilateral ha entrado en una etapa cualitativamente distinta estos dos últimos años, marcada por claras intenciones de fortalecer un compromiso que adquiere visos de estratégico. El interés manifestado por ambos en esta línea indica que se debería generar mayores niveles de asociatividad bilateral en el futuro cercano. En todo caso, si Bolivia no cautela los aspectos políticos formales de este acercamiento, se producirán inevitablemente fricciones inesperadas con terceros, tal cual de desprendió de la tensión argentino-iraní en relación a Vahidi. La experiencia de este hombre clave del Pasdaran en Bolivia es una señal que los próximos pasos del acercamiento bilateral se caractericen por la opacidad y el sigilo.c) De omnibus dubitandum, las aprehensiones del neo-lulismobrasileño Las relaciones bilaterales durante el bienio, sometidas a las reverberaciones del viaje del Presidente Ahmedinejad a Brasil, ocurrido en las postrimerías del 2009, siguen mostrando señales ambivalentes. Sin embargo, la fuerza ex intra de algunas de éstas indican que, paulatinamente, se ha ido instalando la idea de poner las relaciones bilaterales bajo premisas nuevas. Son señales que, decodificadas, ofrecen matices diferenciadores respecto a los años de lulismo puro.En efecto, a lo largo de casi todo el 2010 se observó una atención brasileña muy deferente hacia problemática iraní, ejemplificada en la crítica que hizo el canciller Celso Amorim en marzo de ese año a la imposición de sanciones contra el régimen de Teherán. El pragmatismo del lulismo puro cobró expresividad en el acuerdo Brasil-Turquía (marzo 2010), que provocó desconcierto en varios países centrales, malestar en Washington y preocupación en Israel (24). Ese acuerdo, percibido positivamente por Ahmedinejad, se suscribió en el marco de la cumbre de los G-15 realizada en Teherán.Otra señal proveniente del pragmatismo lulista había ocurrido poco antes, en abril de 2010, cuando Petrobras anunció que mantendría sus oficinas en Teherán y todas sus inversiones en el Mar Caspio, pese al clima internacional desfavorable. Prosiguió al mes siguiente, cuando de forma demostrativa, Lula realizó una visita oficial a Teherán, que culminó en el controversial acuerdo con Turquía. Continuó en junio de 2010, cuando, en votación dividida, el Consejo de Seguridad aprobó sanciones (Resolución 2040) con los votos en contra de Brasil y Turquía (ambos miembros no permanentes del órgano en ese momento).En esta postura pragmática subyacía una visión muy clara. Lula veía los asuntos internacionales con un prisma que favorecía la mantención del diálogo con todo tipo de regímenes y de rechazo a la imposición de sanciones. Para Lula, el efecto de las sanciones terminaban recayendo en los más pobres. Lula, además, insistía en el necesario respeto a la cultura, costumbres y leyes de todos los países, alegando que de lo contrario se alimentaba las tendencias al caos en el sistema internacional.Sin embargo, la asunción de Dilma Roussef comenzó a ofrecer matices respecto allulismo puro, denominación que parte del supuesto que con Dilma el lulismo sigue representando el prisma central de la política exterior brasileña.Sin embargo, los nuevos matices, advertibles en las primeras decisiones de Dilma en torno a la problemática iraní, sugieren que subyacen ideas nuevas. Aunque es prematuro visualizar la intensidad que estas ideas nuevas, se pueden conjeturar énfasis de tipo cuasi doctrinario, por ejemplo en materia de derechos humanos, vistos tanto genéricamente como en lo relativo al de las mujeres. Tal inclinación salpicará directamente la relación con Irán.Dos novedades interesantes sobre esto son las siguientes. Dilma, por ejemplo, fue mucho más dura que su antececesor en cuanto a criticar la lapidación de Sakineh Ashtiani, por presunta complicidad en asesinato de su esposo. Indicó que era "inaceptable y medieval". Apenas ocurrido el hecho, y en su calidad de candidata presidencial, Dilma, solicitó al entonces Presidente Lula, que diera indicaciones a su embajador en Teherán, Antonio Luis Salgado para reunirse con autoridades de la cancillería persa e informarles que Brasil estaba en condiciones de garantizar asilo a Ashtiani.Luego, ya en funciones, invitó a la abogada disidente Shirin Ebadi, Premio Nobel de la Paz 2003, asunto que irritó a la cancillería iraní. Luego, el ministerio de Cultura brasileño formuló críticas a la censura de las obras del escritor Paulo Coelho en Irán.Probablemente el dato más significativo ocurrió en 2011, cuando, por primera vez en 10 años, Brasil (junto a Panamá y Colombia y contra Cuba y Ecuador) votaron a favor de una moción en la Comisión de Derechos Humanos para monitorear la situación de éstos en Irán. Baste recordar que el año previo -2010, es decir bajo ellulismo puro- Brasil se abstuvo (25).Aunque el re-enfoque brasileño implicará que Brasil ya no tendrá un papel tan relevante en el establecimiento del foothold iraní en la región, el régimen de Ahmedinejad ha reaccionado con cautela ante las nuevas señales provenientes de Brasilia. No ha hecho ver sus molestias y pareciera optar por darle preeminencia a los espacios e intersticios que se muestren disponibles. En esa línea, anunció que establecerá un centro comercial durante el segundo semestre 2011 para facilitar negocios entre los dos países (26). El régimen iraní es consciente que el deterioro de la relación bilateral perjudicará más a Irán que a Brasil. Además, también hay señales de continuidad.Vital en este aspecto es la mantención del negocio de la triangulación de alimentos, carnes y azúcar que realizan empresas brasileñas instaladas en Dubai y Emiratos Arabes Unidos.Huelga subrayar que este recalibramiento seguirá siendo monitoreado por Washington y las potencias centrales. A lo largo del bienio ha habido varios motivos de preocupación que podrían repetirse. Por ejemplo, según revelaciones de Wikileaks, a fines de 2010, se produjo una situación que generó preocupación en EEUU y en Alemania, ya que la empresa Machine Sazi Tabriz (MST) habría estado adquiriendo material de uso dual a la brasileña Mello SA Maquinas e Equipamentos. Siemens habría detenido a última hora importantes envíos a Mello SA que iban a ser entregados a MST (27).En definitiva se puede establecer que la relación brasileño-iraní pasa por momentos de ciertas re-definiciones producto de los cambios políticos internos en Brasilia. Dado que la cautela dominará la apreciación de ambos, es probable que la agenda bilateral no oscile entre elementos de poder duro ni blando, sino descanse en aquellos intermedios, donde las cuestiones estrictamente comerciales vayan adquiriendo centralidad. (1) Los dos principales instrumentos globales de la línea estratégica anti-israelí son ese híbrido llamado Hizbollah y el Pasdaran; ambos con capacidades para operar en cualquier parte del globo. Los mortíferos ataques en Buenos contra la embajada de Israel en Buenos Aires en 1992 y contra la AMIA en 1994, ejecutados conjuntamente, son los mejores ejemplos de dicha capacidad. Karmon sostiene que la amenaza terrorista es el principal desafío a la seguridad internacional y que después de la guerra fría no se podría hablar de un conflicto armado donde no se haga uso del instrumento terrorista. En tal sentido –añade- la gran amenaza actual proviene de lo que denomina la "coalición iraní", compuesta por Irán y su proxy organization, Hizbollah, creado por el Pasdaran, por Siria, por Hamas.(2) La cifra aparece en varias de las referencias utilizadas en este texto. Según Eliaschev, las prioridades de esta nueva fase del despliegue iraní son: la Triple Frontera (Brasil, Paraguay, Argentina), Venezuela y Panamá. (3) Ver: "Venezuela e Irán".(4) Otros elementos de poder duro son el esfuerzo por instalar en la región bancos iraníes o bien formar instituciones bancarias asociadas así como la cooperación para la prospección y explotación de recursos energéticos específicos (uranio, litio, petróleo y gas).(5) Fecha referencial clave. El despliegue iraní adquirió contornos más precisos y sistémicos con la Conferencia Internacional sobre América Latina, denominada "Desarrollo en América Latina: su papel y su estatus en el futuro sistema internacional" (febrero, 2007) y en la que participaron invitados de Argentina, Venezuela, Colombia, Cuba, Brasil, Uruguay y Ecuador aparte de latinoamericanistas de Italia, Rusia, y China". Fue un seminario auspiciado por el Ministerio de Relaciones Exteriores iraní y sirvió para dar luces acerca del diseño conceptual y modelos de praxis para materializar la iniciativa. Procuró insertar conceptualmente el despliegue en las corrientes revolucionarias de la época, buscando asociar las figuras de los comandantes Chamran y Guevara como simbólicas del encuentro revolucionario entre Irán y América Latina. El gobierno iraní invitó a exponer al seminario a dos hijos de Guevara. Pocos meses más tarde, en Teherán e Isfahan, también con auspicio de organismos de gobierno, se efectuó el Primer Congreso Internacional de Literatura Latinoamericana. Ver Witker, op cit. pp. 171-172.(6) La relación de Irán con Paraguay se inicia bajo mandato del Presidente Lugo el 15 de agosto de 2008. Un trascendido relevante en las relaciones de Irán con esta zona del mundo es la presunta petición formulada a inicios de abril de 2011 por Ahmedinejad al Presidente paraguayo, Fernando Lugo en orden a garantizar asilo para Muammar Gaddafi.(7) Ver "Apoyo del ALBA a Irán" en el sitio http://www.noticiasdeiran.com (accesado el 01.06.2011).(8) La trayectoria y los eventos dramáticos ocurridos en la capital argentina apuntan a un diseño conceptual y praxis específicas del interés de Irán en Argentina, pues no se divisan motivos demográficos o migratorios, ni económicos, ni gran colaboración militar, aunque sí hay versiones, no confirmadas, de interés en la industria nuclear argentina a comienzos de los 90. Sí tiene fuerza explicativa la numerosa población judía en Argentina. Al asumir a los aproximadamente 250 mil judíos argentinos como blanco de su despliegue global, se advierten elementos coherentes con el esquema antijudío que marca la diplomacia iraní desde fines de los 80.(9) El acuerdo habría nacido tras una oferta hecha por Timmerman mientras efectuaba una visita a Aleppo, Siria entre el 23 y 24 de enero de 2011. Los mediadores iban a ser el Presidente sirio Bashar al Assad y su canciller Walid al Mohalem. El texto de Eliaschev asegura que en septiembre de 2010 y febrero de 2011 se produjeron tratativas directas, aunque discretas, entre Argentina e Irán a nivel de "funcionarios poco conocido".(10) Pagina 12 y Perfil (7 de abril). El juez Nisman identificó una casa de seguridad de Rabbani y otros 20 terroristas en Sergipe N° 67 en la ciudad Foz de Iguacú.(11) Rafecas instruye casos contra algunos grupos terroristas como Quebracho. Esas afirmaciones las hizo en una reunión realizada en la Sociedad Hebraica del Pilar, Buenos Aires el 30 de marzo de 2011.(12) Hay versiones que indican que esta fórmula habría sido propuesta en 2003 y que no se habría encontrado ningún país dispuesto a servir como tal.(13) "Respuesta de Irán a Argentina en Naciones Unidas" en http://www.noticiasdeiran.com (accesado 14.6.2011).(14) El intercambio comercial entre Irán y Argentina llegaba en 2011 a US$ 1.200 millones anualmente.(15) Inicialmente, las investigaciones tropezaron con las enormes dudas acerca de qué pudo haber motivado esta expansión terrorista hacia América del Sur. También se hicieron públicas varias hipótesis argentino-céntricas de un presunto descontento del mundo musulmán por la participación de Buenos Aires en la primera guerra desatada por Estados Unidos contra Irak, aunque Irán era muy hostil al Irak de Saddam Hussein 1980-1988. Ese resentimiento musulmán se habría visto alimentado también por otros motivos. Los daños causados a Irak, financista de Egipto, y potencial beneficiario del proyecto misilístico Cóndor (desarrollado por Argentina y Egipto), abandonado por Menem por imposición de Estados Unidos. Luego estaría la decepción de Trípoli tras haber invertido fondos en la campaña electoral de Menem. Otro elemento de resentimiento musulmán con Argentina sería la distancia que tomó Buenos Aires respecto del Movimiento de No Alineados en 1991 y su acercamiento a Estados Unidos. Por último, la desilusión experimentada por Damasco ante los diversos viajes de Menem a Medio Oriente en los que no visitó Siria (el país de sus ancestros), a la vez que se convertía en el primer Presidente argentino en viajar a Israel. Todas hipótesis excesivamente argentino-céntricas y carentes de efectivo poder explicativo.(16) Irán ha financiado una fábrica de textiles, una de cemento, un hospital en El Alto, una procesadora de lácteos y ha iniciado estudios para una ensambladora de tractores. La suma es un conjunto de créditos que forman parte del llamado Plan de Cooperación Industrial válido por cinco años firmado en 2007 durante la visita de Ahmedinejad a La Paz. Notoriedad tiene un reportaje de la BBC (27.11.2009) alerta sobre la posible obligatoriedad que existiría en el centro hospitalario construido en El Alto para que las mujeres porten velo.(17) La visita de Morales incluyó un desplazamiento a la ciudad de Tabriz donde visitó una fábrica de tractores. Irán tiene la oferta de instalar una ensambladora similar a la levantada en Venezuela.(18) Ver: "Uranio y agua para Irán" en http://www.noalamina.org (accesado 10.6.2011).(19) Sobre este punto, las negociaciones se habían iniciado en octubre de 2010 durante la segunda visita de Morales a Teherán. Bolivia tiene un depósitos estimados de 100 millones de toneladas métricas (TM) de litio, lo que correspondería al 70% de las reservas mundiales.(20) Excomandante general de la Fuerza Quds del Pasdaran. Existe orden de captura internacional por su participación en el atentado contra la AMIA en Buenos Aires en 1994. Por años nexo entre Teherán y Hizbollah. Su cargo actual implica una tuición directa en el programa de desarrollo nuclear de Irán. La orden de captura de Interpol se extiende a Moshen Rabbani (ex agregado de prensa en la embajada iraní en Buenos Aires), Ali Akhbar Velayati (excanciller), Alí Fallahijan (exministro de Informaciones), Alí Rafsanjani (expresidente), Moshen Rezai (exasesor presidencial), Hadi Soleimanpour (exvicecanciller).(21) Gran parte de la prensa mundial consignó esta nota ese día. El canciller David Choquehuanca endosó responsabilidades a funcionarios medios del Ministerio de Defensa. Otro antecedente que apoya la sospecha de una circunstancia embarazosa es que Vahidi se encontraba alojado en el mismo hotel (Casa Blanca), que el Presidente Morales. Ver La Tercera, Santiago de Chile 6.6. 2011.(22) La Prensa (Bolivia) 03.06.2011.(23) El anunció precisó que podrían adquirirse FAJR-3, S-68 e IRAN-140 así como helicópteros. Ver Los Tiempos, Cochabamba 1.11.2010.(24) El acuerdo consistía en que Irán se comprometía a enviar 1200 kilos de uranio enriquecido al 3,5% hacia Turquía y recibiría el producto enriquecido al 20% para usos médicos, en un proceso supervisado por EEUU, Francia y Rusia más el Organismo Internacional de Energía Atómica.(25) Aprobada por 22 votos a favor , 7 en contra y 14 abstenciones.(26) Aunque la relación entre ambos países también se remonta a comienzos del siglo 20 sólo a partir de los 90 comenzó a registrar cierto volumen al intercambiar alimentos. Sin embargo, a partir de 2003, Petrobras obtuvo una primera licencia de exploración de petróleo en el Mar Caspio con lo que la relación bilateral aumentó fuertemente. En 2004, Petrobras obtuvo una segunda licencia y en 2007 una tercera. El 2009, asociada con Repsol, obtuvo derechos de explotación del bloque Tosan, también en el Caspio.(27) State 123431 SIPDIS E.O. 12958: DECL:12/12/2034 *El autor es politólogo y periodista de la Universidad de Chile,PhD en Comunicaciones por la Universidad Carlos IV de Praga, República Checa y egresado del Centro Hemisférico de Estudios de la Defensa, National Defense University (CHDS-NDU). Ha sido jefe de la Mención en Relaciones Internacionales del Doctorado en Estudios Americanos de la Universidad de Santiago y jefe de Cátedra de Estudios Internacionales de la Academia Nacional de Estudios Políticos y Estratégicos (ANEPE) de Chile. En la actualidad es profesor de la ANEPE y la Universidad Alberto Hurtado de Santiago de Chile,profesor visitante del Colegio Interamericano de Defensa, Washington DC. Ha publicado varios artículos sobre terrorismo y seguridad internacional en revistas académicas, destacando "Los guiños de Mefisto. Relaciones Irán-América Latina, los casos de Chile y Argentina", "El síndrome de Herostratos o la conversión de terroristas en íconos". "Momentos palmerstonianos: retórica integracionista y conductas divisivas a la luz de la cumbre energética de 2007".

Edward C. Boyle ; The Weber and Davis County Communities Oral History Collection include interviews of citizens from several different walks of life. These interviews were conducted by Stewart Library personnel, WeberState University faculty and students, and other members of the community. The histories cover various topics and chronicle the personal everyday life experiences and other recollections regarding the history of the Weber and Davis County areas. ; 68p.; 29cm.; 2 bound transcripts; 4 file folders. 1 video disc: digital; 4 3/4 in. ; Oral History Program Edward C. Boyle Interviewed by Rebecca Ory Hernandez 9 November 2011 18 November 2011 Oral History Program Weber State University Stewart Library Ogden, Utah Edward C. Boyle Interviewed by Rebecca Ory Hernandez 9 November 2011 18 November 2011 Copyright © 2012 by Weber State University, Stewart Library Mission Statement The Oral History Program of the Stewart Library was created to preserve the institutional history of Weber State University and the Davis, Ogden and Weber County communities. By conducting carefully researched, recorded, and transcribed interviews, the Oral History Program creates archival oral histories intended for the widest possible use. Interviews are conducted with the goal of eliciting from each participant a full and accurate account of events. The interviews are transcribed, edited for accuracy and clarity, and reviewed by the interviewees (as available), who are encouraged to augment or correct their spoken words. The reviewed and corrected transcripts are indexed, printed, and bound with photographs and illustrative materials as available. Archival copies are placed in the University Archives. The Stewart Library also houses the original recording so researchers can gain a sense of the interviewee's voice and intonations. Project Description The Weber and Davis County Communities Oral History Collection includes interviews of citizens from several different walks of life. These interviews were conducted by Stewart Library personnel, Weber State University faculty and students, and other members of the community. The histories date back to the early settlement of North Ogden, and cover various topics including the History of Fort Buenaventura, city government affairs, controversial issues, Latinos in Ogden, personal everyday life experiences and other recollections regarding the history of the Weber and Davis County areas. ____________________________________ Oral history is a method of collecting historical information through recorded interviews between a narrator with firsthand knowledge of historically significant events and a well-informed interviewer, with the goal of preserving substantive additions to the historical record. Because it is primary material, oral history is not intended to present the final, verified, or complete narrative of events. It is a spoken account. It reflects personal opinion offered by the interviewee in response to questioning, and as such it is partisan, deeply involved, and irreplaceable. ____________________________________ Rights Management University Archives All literary rights in the manuscript, including the right to publish, are reserved to the Stewart Library of Weber State University. No part of the manuscript may be published without the written permission of the University Librarian. Requests for permission to publish should be addressed to the Administration Office, Stewart Library, Weber State University, Ogden, Utah, 84408. The request should include identification of the specific item and identification of the user. It is recommended that this oral history be cited as follows: Edward C. Boyle, an oral history by Rebecca Ory Hernandez, 9 November 2011 and 18 November 2011, WSU Stewart Library Oral History Program, University Archives, Stewart Library, Weber State University, Ogden, UT. iii Edward Boyle Roswell, New Mexico 1943 Edward Boyle New York, 1984 1 Abstract: The following is an oral history interview with Edward C. (Ted) Boyle (b. 1922). The interview was conducted by Rebecca Ory Hernandez, on November 9, 2011. In this interview Ted speaks of his early life growing up and attending school in Ogden, Utah and later attending Weber State University. The interview also highlights his life after graduating from Weber State University and going on to graduate school at the Thunderbird School of Management. Ted also talks about his career in international banking with Citibank, traveling the world and working as a bank executive. Ted is retired and now lives in St. George, Utah with his wife Hazel. ROH: I'm going to state the date and where we are. Today is November 8, 2011. We're in the home of Ted and Hazel Boyle in St. George, Utah. We are here conducting an oral history. I'll just start by asking you to repeat your name and where and when you were born. EB: My name is Edward Conrad Boyle, commonly known as Ted Boyle. I was born in Ogden, Utah, August the tenth, 1922 in the Thomas D. Dee Hospital in Ogden, Utah. I picked up the nickname of Ted Boyle when I was a youngster which came from my Uncle Albert. He used to call me Theodore Roosevelt and Ted stuck with me all my life. I was socially known as Ted Boyle. ROH: You were born in Ogden. Where did you grow up? EB: I grew up in Ogden, Utah on the east side of Ogden, which at that time was at the outskirts of the city. It was at 1470 26th Street which was between Taylor and Polk Avenue and was an area which was basically low income people on the 2 north side of the street and people of means on the south side of the street. Our house was very small by today's standards—two bedrooms, one bathroom, a small kitchen, a dining room, a living room, and a small lot. My brother and sister and I and my mother and my father only had two bedrooms. So my brother and I slept in the unheated basement of our home in unfinished bedrooms with my mother's washing machine between us. My sister had one bedroom and my father and mother had the other bedroom. It had no garage in as much as my father never owned a car. He was one of the very few in Ogden who didn't have a car. My original concept of this house was that it was purely acceptable for us during those trying times which would be the Depression era of 1920s and 1930s. We got along as we could and stayed out of each other's way. My father who was a furniture salesman with Boyle Furniture Company in Ogden would actually walk two miles through all kinds of weather to save a five cent bus fare. Without a car we all depended on friends to get around to social activities. My mother had to walk three to four blocks and bring back her groceries. I remember that very distinctly. At the tender age of six, seven, and eight years old, I was unaware of the differences in the economic status of people on the block. As I grew older I learned to understand that we were on the wrong side of the track as far as the economic aspect of it. It didn't really bother me that we grew up near the poverty line. My father was a good provider. My mother was a wonderful cook. We ate the staples, cornmeal and mush in the morning and things of that nature. We had an icebox, a small cubicle to eat in 3 and I got by. I learned to accept what we had. I had one pair of shoes and one suit. I learned early in my life that I was not conventional in the sense that I had no feel for solving mechanical problems. I couldn't do anything but maybe change a light bulb. That carried through my whole life as my wife knows very well. I was just not like that. I was not allowed to have a house pet. All my friends had dogs but my father adamantly said no dogs. So I grew up in the neighborhood by adopting dogs in the area. My earliest recollections of my schooling in elementary school were at Polk School, which was a block away from our house. It was a very modern school of that time. There were eight grades and it was very convenient. However, during the heavy winter storms that we had in Ogden in those days, we had snow days where I couldn't even get to school because the snow was piled up so high. ROH: How did you get school? EB: We would try and get through these snow drifts but we were basically snowed in. We used to build snow igloos in my front yard. In my early days at Polk School I was a very average student. I thought I had a knack for numbers but when it came to social studies, math, and others, I had trouble. The teachers at that time—our principal was named Florence Brown. If we got out of order then, at that time, we were called in the office and she took out a ruler and hit us on the butt. Today, you know what would happen. But we accepted that. Our parents accepted that if Johnny was out of order he would pay the price. My earliest contact with the female species was in the third grade when we had all the boys 4 sitting on one side of the room and the girls on the other with a phonograph record playing dance music. The teachers would pair us off and we'd go out and try to dance with each other. It was a very strange feeling. Among those girls was Rosanne Peery. She was in the same class I was. I had no skills of any sort. We had a shop organization where we went down in the basement of the school and made wooden things. By hook and crook I made a sewing cabinet for my mother and had it shellacked and it was a pride and joy for me. As I walked up to my house I stopped at the neighbors place and his Labrador retriever went over and did his thing on my sewing cabinet. I was devastated. It didn't matter when I took it home to my mother. She said, "Oh, that's fine." I think that really must have been the only thing I ever created. ROH: How old do you think you were? EB: I was probably about ten years old I guess. In the school I was not physically adept towards contact sports which bothered me enormously because we were always rough housing and I was afraid to get in the middle of it. So I became a finesser, trying to find a sport where I didn't have the contact. I developed a very fine arm. I used to throw stones and I developed a very strong pitching arm, so I became successful in softball and things like that. Going back on Polk School— my late brother (who was five years older) at one time, on the third floor, opened a window and got a hold of the ropes on the flag pole and swung out one hundred feet off the ground before hitting the ground. That was the beginning of my brother being an ultimate dare devil. He was afraid of nothing. My dad loved Sundays as it was his only day off. He was not a church man. He would go out 5 and tend his garden which included all kinds of fruit trees. Then in the afternoon he would go down on the bus to the Orpheum Theater and see a movie, then come back home with a bag of popcorn for the family. My mother of course was in church. I was encouraged at that time to go to church on Sunday. ROH: What church did your family go to? EB: It was the LDS church at 26th and Jackson. At that time it was a six block walk for my mother in all kinds of weather. Our bishop was David Romney. I had a group of friends while growing up and among them was Jennings Olson. Jennings was a person whose handicap was a club foot. We all tried to put that out of our minds when we were playing baseball and things. Jennings was always full of vim and vigor. One thing I remember about him was that he did not like carbonated drinks. He always had to have something non-carbonated. I remember that he read voraciously. His father was a very good medical doctor in Ogden. His mother was a dear but rather homespun. We formed cliques. We had what we called the 26th Street Gang which was the street we lived on. We had about six or seven of us that used to play football in the street and then we'd go skating over bumps and things like that. It became the center of activity. We all grew up to bond. Those people in my early ages were the people that stood with me through the ages and today are still my best friends. It was a phenomenon that we all had the same interests and it was a matter of getting along without any money. We created our own fun outside of the theaters. For instance, on Saturday I would go down to my dad's office at Boyle Furniture and I'd say, "Dad, I want to go to the movie." So he'd give me twenty five cents. That twenty five 6 cents covered my bus fare down and back from the Paramount Theater, a bag of popcorn and I would sit in the front row as close as I could get for these cowboy movies because it was thought at that time, the closer you were to the action, the better off. I'd get out of there and I'd be blurry eyed. I couldn't see for five minutes when I got out of the theater. One thing that I do remember very vividly was Christmas. In Ogden, in the thirties, there were several department stores including the Emporium and Lowe's where they had Christmas displays with electric trains and everything like that. I used to spend hours looking at these various things and hoping against hope that we would be able to get something of that note. Christmas night my brother, my sister and I would go to bed early hoping that Santa Claus would get down the chimney. We had a chimney. I never did understand how he was going to get down through there. My mother put out the cookies with milk and we'd go to bed early and get up at four o'clock in the morning to sneak up the stairs and look and see what Santa Claus had brought. Quite often it was a bowl of hard candy and an orange, a piece of clothing and an inexpensive game. We kept hoping for a train set but we made the best we could. We survived. I became aligned with my closest friends that I loved. About the church— my mother was a devout Mormon. She would have been in the bishopric if they had allowed women. My father was a non-believer, a great man but did not actively participate. I was obliged by my mother every Sunday to go to church with my friends. We diligently went in and passed the sacrament and obeyed what we thought were the laws of the church until such time when I think I was 7 about sixteen or seventeen. The bishop came down the aisle and got me by the arm and said, "Ted. I think it's time for you to go on a mission." That shocked me. I think I just said, not negatively, but that I was not really interested at that time. My truest friends—all of them followed the same line of reckoning, so I wondered at this time, what was it? Was it peer pressure? We all had the same idea at that time that we were not going on missions. It was etched in stone. After we graduated from Polk School, I went to Central High School down at 26th Street and Monroe. Believe it or not, those two years are negative. I have nothing really factual that I can remember of any note. In other words they passed by me without any real essence of any happenings at all except the music instructor there said, "Ted, you've got a wonderful voice. You should go out and use that voice." I remembered that. So off we went to High School at dear old Ogden High School on 28th and Harrison. We were the third class and that's when I really grew up. It was a new atmosphere. The ambiance, the people, the teachers, the location all struck me as being something super. I guess you could say I was a jokester all my life and I got by with my wits. In other words, I was always cracking jokes and breaking up people. I became very popular and joined the social clubs there. I knew quite a few people. But I do remember something, this was pre-war, they had ROTC. It was officer's training school. We were obliged to go out on the campus and parade around for an hour and then after that they selected officers from our group to lead. These were the power makers. This bothered me enormously. I was not selected. I was a private. All my friends were colonels, majors, captains, etc. I was obliged to walk through 8 the ranks as a private. I thought, "Well, this may be my life. Maybe I'm not going to make anything out of it." But I did make some very good connections there. I loved the people there. Our actual basketball team were the state champions. We were honored in Salt Lake. We had, what I think Tom Brokaw would call the finest generation. I would consider that our class of 1940 was exceptional as far as the quality of the people and what they did and the environment we were living in. ROH: Can I ask you a question real quick? Tell me the names of some of your friends at Ogden High. Who were your best friends? EB: Jack Luddington, who I'll talk about incessantly. Jack Dalton, Bill Hinds, Jennings Olson, Richard Stine, Parry Thomas. Here's something that you want to wire in. Parry Thomas and I were very close and Parry Thomas probably was the leader of the pack, as far as what happened to the graduates. Parry became president of a prestigious bank in Las Vegas. He became a very big factor in banking in Las Vegas. Bob Bishoff who was president of I think the Commercial Security Bank and Maurice Richards, a prominent attorney. It was a time when Ogden was at its apex as far as producing people of culture with the ability to move on. One thing I noted that in our parking lot there were probably five or six cars of people that owned cars. You go by today and there's hundreds of them out there which is an indication of time and change. I still, at that time, had no real love connections. I think a lot had depended upon that my family had no car so I depended a lot on double dating and taking girls out like that. I had a lot of very close female friends but nothing serious at 9 all. I would go to the prom by myself and my friends would put my name down and I'd dance with their female partners. ROH: Did you call that stag? We always call that stag when you went by yourself. EB: Yeah, I went stag. I enjoyed the dance with other people's partners. I was awe stricken by the campus. It was so beautiful in 1940. It was constructed for less than one million dollars and one of the advisors to building was Meryl McClanahan whose son was Richard, a classmate of mine. After we graduated many people went their different ways and I went home and I said, "Where do I go from here?" I knew we had very limited means. I had no money myself. My dad couldn't afford anything. So Dad scratched up enough money for tuition for Weber Junior College. Quite a few of the students there were on short hook as far as money. The money class went to Utah or BYU. We arrived down on the campus of Weber College and it was very, very small in relationship to what I had pictured. The student body and my class were something like 180 people. We were in a war by that time so that meant that there were very few people around. I thought while I was there that I still wanted to be a forest ranger because of my likes of being outside, hunting and fishing at the cost of the government, and so that was my theory. I wanted to graduate from Weber College and then go on to Utah State where they had a forestry school. I became involved with the Excelsior Club, which was the premier social club. I made lots of friends. I think my personality lent itself to making friends. I was like a loose cannon. I always felt like I had to make light of anything and I think that was a big hit down there. 10 I became very close to [Henry] Aldous Dixon who was president of the College. His son, John Dixon, became Director of the University of Utah Medical Center. I made new friends. I found at that time that Ogden had a history of being a Mormon town. In other words, if you were Catholic, you were on the wrong side of the track. I had wanted to date a girl who was a Catholic. My mother found out about it and she had a fit. She was very down to earth and strong in her beliefs of the LDS Church. ROH: Did you have any friends who were African American? EB: Here we go. In the student body there was one black. His name was Willy Thomas and he was a huge, black, muscular athlete from Kansas. He was an outstanding track man and basketball player. He ran the hundred meter dash. I became very close to him out on track. I ran the track there, the mile run. I would joke with him and he would sometimes take it as offensive and then he'd say, "After I thought about you Ted." I was chuckling to myself. I became very close to him. Another example was Wat Misaka who was of Japanese origin and an excellent basketball player. He has been honored nationally. I became very close to him. At that early stage in my life it became apparent that I had no racial problems. I had made my point there at Weber College and found that later on in life, that's what often led on to what I did and where I went. Anyway, I took fond memories from Weber College. I thought that the beauty of that college at that time was the smallest of the class, the informalities, the attention from the seniors as to coming in to classrooms and talking to you. You felt like it was a family operation, totally family. It was a wonderful thing. 11 Aldous Dixon lived on campus in a small house right there. Later on when I went in to the war—my family would tell him what I was doing over there and he would write to my family and say Ted was going to be okay. I also liked the small classes at Weber. We had a lot of help from a very professional teaching staff. As an aside, I purchased an expensive oil painting of Farrell Collett who was once the head of the art department at Weber College. ROH: Nice. EB: Anyway, I always imagined myself as being an athlete. I had a very strong arm and I could throw the football farther than anybody on the football team but I was so fragile that I knew that once I was hit I was down. So I never did participate in football or basketball. But I was on the tennis team at Weber College. By the way, while I was in high school I was city champion in several contests there and I would ride down on my bicycle to Liberty Park, and I would have one racket with maybe a string broken. In one case, a prominent citizen would come up in his convertible in white shorts with a racket and the contrast was startling. I had a tremendous forehand but no backhand so I would always attack from my forehand and try and cover up my backhand. I was fairly successful because when I was younger I used to pound the back of our house constantly with a ball. That's where I developed my forehand and the serve was tremendous. But my backhand did not exist so I lived by playing around that. It was one of those things. As we progress along, the war was coming closer and closer so a group of us, after graduation from Weber College, decided to go to Utah State. Five of us 12 went to Logan and moved into in a house near the campus. We managed to survive. I joined the Sigma Alpha Epsilon fraternity, which was a premier club. I was very comfortable on the campus. Then my dearest friend Jack Luddington, who I mentioned before, had been taking pilot training out at the old Ogden Airport, and he said, "Ted, things are closing in. The Air Force is having a meeting in Ogden for possible applicants to join the Air Force. Do you want to go along with me?" I said, "I don't know." Then he talked me into it. I said, "Yeah, we'll get drafted if we don't." So we went in there for the physical, I think I weighed 138 pounds. The Army Air Force medical guy said, "You don't qualify. You're too thin. But I want you in here. Go home and eat about three pounds of bananas and come back tomorrow. See if we can fudge you in there." Low and behold I gained a pound or two and he said, "You're in." My friend Luddington, who was not a genius either, as far as his ability to score well on tests, was the last one out of the class. He sat down and I said, "Come on Luddington." He finally made it and we both joined the Air Force and left Salt Lake City on the train for Santa Ana, California. We arrived and there were 20,000 cadets at our base. We were separated after we took the tests to find out what our abilities were. He was assigned as a potential pilot and I was assigned as a potential bombardier. So after we graduated from the base in Santa Ana I was assigned to Roswell, New Mexico which was a bombardier school. Jack went in to pilot training on the California coast. I arrived in Roswell and found that we were dealing with the Norden bomb sight which was highly prized by the German Air Force as being something they 13 would like to have in their power. So, while we were in training, we always had to carry a .45 revolver and treat the bomb sight as a most valuable item. We would practice bomb day and night. We were expected to drop the bomb in a five hundred foot circle from five miles high. The blue practice bombs had ninety-eight pounds of sand and two pounds of spotting powder. The Air Force kept washing out cadets. I would call my mother and say, "I'm still in here but the ranks are thinning." When I finished, I got a short leave to go home to Ogden and I showed off my wings. Then I was assigned to Hondo, Texas for navigational training. Hondo wasn't too far from Austin, Texas, where my Aunt Clara lived with her billionaire husband. She invited me to go up there on the weekends. She let me sleep late and she fed me well and I was in seventh heaven. After we were through with Hondo, we got our orders to form our strategic bomb group in Salt Lake City, at Kearns Army Base. I thought it was nice to be back near home for a few days. Our plane crew was made up of crewmen, pilot, copilot, bombardier, navigator, and six gunners. We named our plane 'Lassie and Her Lads' because we had a gorgeous spray painting of Betty Grable wearing a swim suit on the tail. We were a composite group of the Midwest and far West. We trained in Dyersburg, Tennessee. Then we moved on to West Palm Beach Florida for our final training. From there we got orders to go to Trinidad, West Indies. We flew by ourselves. The landing strip was in the jungle and we were in there overnight. The next day we took off for Belem, Brazil. We flew over the Brazilian forest for ten hours and I said to the navigator, "If we go down in 14 there, we're done for. They'll never find us." From an overnight in Belem we flew to Fortaleza, Brazil, which is on the tip of Brazil. The next stage was thirteen hours flying over the Atlantic Ocean. We took off at night. We were flying a thousand feet over the waves in order to save on fuel. I was in the nose, as usual, and we encountered St. Elmo's fire, which was an electrical discharge carried to our guns. I thought we were being fired on. It was phenomenal to see. We arrived in Dakar, Senegal in North Africa. That was an eye-opener. As we landed, a multitude of Senegalese warriors came out with guns and top hats and surrounded our plane in order to protect it. They put us in canvas tents and as we relaxed, the Senegalese came through with their spray guns for malaria and they sang as they went through and sprayed us. Our next stop was Marrakech, Morocco situated high in the Atlas Mountains of North Africa. We went into town to visit the markets and old French restaurants. Towards the evening we decided to visit the French Foreign Legion outpost in Marrakech. We asked the commander if we could watch their parade in the evening and he said we would be their guests of honor. That night we froze to death and slept in our plane. The next morning we got orders to go to Tunis, North Africa. We flew across the Sahara and landed at a deserted German Luftwafee air base that was used during the Montgomery and Rommel desert war. We visited the ancient aqueducts there and marveled at how they had been built. We also visited the ruins of various German Luftwafee planes and we were warned not to take anything because everything was booby trapped. 15 We received our combat orders and flew from Tunis to Foggia, Italy and landed at a deserted air field that had been occupied by the German Luftwafee. We went to our canvas tent and proceeded to locate the mess hall. We thought the food was not very tasteful, so we bartered our provisions for local products such as fresh eggs. Our group was the 463rd bombardment group commanded by Colonel Frank Kurtz, who went back in history to the invasion of the Philippines by the Japanese. His airfield was attacked by Japanese bombers and several of the American B-17 bombers were split in half. They put one piece of a bomber into another and called it the Swoose—half swan, half goose. Colonel Kurtz was the chief pilot of that plane, which is presently being restored in the United States. We got settled into our base and our first mission was what we called a 'milk run.' That was to indoctrinate one without fear of major casualties. As the bombing missions progressed, they became more deadly and losses mounted. Then it became one of marking down. You had to make fifty missions as related to a loss of three to four percent of the planes each time we went out. As the missions increased in intensity, we finally came to a mission where the target was Ploesti, Romania. For the Germans, the Ploesti oil fields were a source of oil for their entire military operation. It was heavily guarded by flak guns and F-190s and ME-109s. They were the elites of the German Air Force. When we found out we were going to Ploesti, everyone sighed, had their breakfast, went out to put in their bomb load, and proceeded to taxi out to the runway. 16 By the way, the air fields were metal strips, not cement, and the B-17 loaded with 6,000 pounds of bombs, 2700 gallons of high-octane gasoline, does not get off the ground very quickly. At the end of the runway there was a fence. I was in the nose of the plane and remarked to the navigator, "This plane's not going fast enough to get off the ground." Finally we cleared it by about a hundred yards and went up into our formation at 15,000 feet. Over the Adriatic Sea, everyone discharged their machine guns to make sure they were firing. Then we went over the Yugoslavian Alps. The Yugoslavians were not allies at that time and they had flak guns mounted on top of the mountains. They shot at us, but weren't very effective as they didn't have advanced radar. We flew into our target area and our escort fighters, which were P-38s and P-47s peeled off because they were short of fuel and headed back to their base. They left us unescorted as we approached the target area. There were three or four hundred planes forming a line at what was called, the 'initial point.' This enabled German aircraft guns to zero in on our direction and altitude. I took command of the plane, flying it as we approached the target area. As we neared the target area we saw a huge black cloud box where all the German flak guns were concentrated. I saw planes going through that box and going down on fire and we knew we were next. It was very trying and tested ones fortitutde to the maximum. As we approached closer to the target, I cranked in the airspeed, the velocity, the wind, and other data into the bomb sight. The two indices cross and you know you're on target. I'm watching carefully and finally the indices cross 17 and I say, "Bombs away." The bombs are released and we turn away with planes on fire on both sides of us. As we left the target, if any of the planes in our formation had an engine out and they trailed the pack, they were attacked incessantly. You had to keep a tight diamond formation with seven planes, which also gave you more firing power against the enemy. So as we came away from the target and headed back, we were still alive. Then we started talking about if we had enough fuel to get home. As we neared the Adriatic coast, we started planning whether we were going to make it or whether we were going to ditch. We'd all had training as far as what to do. We finally arrived in the vicinity of the airfield and landed. We were interrogated and had our hot chocolates and donuts and tried to unwind. In another mission, we lost all of our commanding officers and crew in a mid-air collision caused by cloud coverage. In another occasion after takeoff to return to base, we had instructions that the mission was aborted. Our chief pilot, who was later a noted neurologist from Boise, Idaho, turned to our copilot and said, "Why don't you handle this landing." We turned towards the runway and I noted there was a crosswind and the copilot wasn't factoring that in. As we approached the runway, I said, "We're in trouble." We hit on the left landing gear and bounced about fifty feet up in the air and came down with the engines chopping up the runway—with 6,000 pounds of bombs and 2,700 gallons of fuel. I said, "I'm dead." We slid for about five hundred yards and the minute we stopped I yelled for everyone to get out and I ran for about a half a mile and dropped down and covered my head. For some time the rescue crew wouldn't 18 get near the plane to deactivate the bomb load. I don't know why that plane didn't explode. [photo included] ROH: Let's pick up where we left off with World War II. You had survived a crash landing. You said it took a long time before anyone would go near it. EB: Gas was pouring out over the engines and the bombs were banging against each other. We stayed away for a long time and then the emergency crew hosed it down to cool it off. ROH: Did they send you on vacation after that? EB: No, the policy was that you could fly twenty-five missions and then you could take a week off and go to the Isle of Capri near Naples to unwind. My theory was that I wanted to get out of there as fast as possible so I didn't take the vacations. I flew my missions because I wanted to get back to the States. The B-17s flew between twenty and twenty-seven thousand feet. It was thirty degrees below zero—freezing. Non-pressurized cabins. Ice formed down the face of your gear. No relief tubes. We had flak suits on and our parachutes hooked on one side, then we had a helmet. It made it very hard for us to move around. On another mission, we had a misfire in the bomb bay as two bombs had banged together and did not detach. The pilot said, "Boyle, get back there and release those bombs before they blow up." In the B-17, between the front part of the plane, the bomb bay, and the back, was a rail and two supports. As I walked over it, I was looking down at the Mediterranean from 25,000 feet and holding on to a rail with one hand. I was trying to release the catch for the bomb that was 19 swinging against the plane. I managed to unhook the bomb and made a silent prayer as I returned to the nose of the plane. It was a terrible thing to fly eight hours on total oxygen at very low temperatures. It was bitterly cold. After a mission, the Red Cross would be there waiting for us with donuts and hot chocolate, then we'd be interviewed about the mission immediately. As the missions went on, I would write letters. I have over a hundred letters that I wrote to my mother that she kept. I began to wonder if I was going to make it or not. On my fiftieth mission I was flying with another Utahn, Clyde Hart, and he knew it was my fiftieth mission. When we landed, I got out of the plane and kissed the ground. Before that, on a raid over northern Italy, we had some terrible problems from damage to the plane. I managed to get the bombs on target and two weeks later I was awarded the Distinguished Flying Cross. After my fiftieth mission, I said, "I've done it!" We got ready to depart and the fifteenth Air Force came out with a memorandum saying, "Unfortunately, we have a shortage of flight crews, so you can have thirty days' leave in the United States, then come back and serve another fifty missions." I wrote to my mother and said that was a death sentence, I would never come back. Fortunately, they reversed that. I left Naples on a troop ship on July 26. We were in the upper part of the boat and on the decks they had thousands of people who were fleeing France and Italy. They had no place to sleep, so they slept on the deck. We were in a convoy surrounded by destroyers, but we had reports of submarines in the 20 area, so we were dropping death charges. That was scary. We arrived in New York. I took a train from New York to my home in Ogden. My first few nights in my family home, I would wake up screaming. I hadn't unwound yet. I would try to find ways and means of winding down. After resting at home, we were sent to a camp in Santa Monica to continue to decompress. My combat days were over, thank the Lord. I was assigned to San Antonio Air Base, and then I spent a series of time moving from one air base to another. I kept in mind that I might be called to duty again. I applied for pilot training in the Air Force and I was accepted. I was assigned to Thunderbird Field in Phoenix, Arizona. The field was also occupied by Chinese cadets who thought nothing of flying into you or on top of you because they had no reason for flying etiquette. In that area of Arizona, there are always hot air drafts. After I had gotten to the point where I was flying solo, I was landing the plane and unbeknownst to me, the pocket of hot air was pushing the plane up and I didn't compensate for that factor. I pancaked and spun around on the landing strip. Thankfully, I wasn't hurt. Immediately I went on a flight check. The instructor, a pilot named Carl Thigpen said, "Ted, you're a good pilot, it's unfortunate you've painted yourself into a corner." They washed me out of the program. I eventually ended up in Denver, Colorado where I was released from the Army-Air Force. ROH: Did your older brother serve as well? EB: No, he had a medical problem. He was a dare-devil—totally different than I am. He parachuted out of a plane in Ogden in 1934 at the age of seventeen. It was a 21 high school bet with his friends. The owner of the airport told him he had to have his father's permission, so Billy called our dad and said, "Dad, I'm going to jump out of a plane, you have to give permission." We sat on the front porch and watched this biplane circling up and then a parachute drop. He became a champion ski jumper in the 1930s. He became an expert on Ecker Hill which was adjacent to Park City. It was a humungous, steep hill, and it attracted a bevy of Norwegian ski jumpers. They formed a cartel and would have jumping contests. My dad and I would go to watch my brother jump. He did exceptionally well at that. After that, he went to California and raced cars. He had no fear at all. That was his life. Later, he became a dreamer. He got into real estate and everything was going to be a million dollars. He was an alcoholic. He became an advisor in Santa Monica for a bevy of movie stars and famous people who would call him at two o'clock in the morning, "Billy, I got a problem." He never quite made it financially. He was always engrossed and saying, "I just got to get this guy to sign this and then I've got it made." It was always touch-and-go with Billy. We were very different. ROH: Did he write to you while you were gone? EB: I've got a ton of letters. Hazel and I are always wondering about who's going to give a hoot about these letters after we're gone. Billy was a great personality. He could walk into a place and immediately have people around him. He eventually ended up in a nursing home in Santa Monica and Hazel and I would go diligently and take him milkshakes and candy bars. The next day he would say that people 22 had stolen them from him. I said to Hazel, "Now that I've seen this in my brother, when it comes time for me, I'm heading for the hills with a Pepsi." It taught me a lesson in assisted living. He was my protector when I was young. My sister was a beauty queen from the get go. She did modeling in Salt Lake City and she was a prom queen. She married well—Ed Haas who was one of the producers of "The Munsters." She traveled in high style in Santa Monica with him. We had the same experience with her in assisted living that we had with my brother. ROH: So none of you worked in the Boyle furniture store? EB: This is fun. I thought from day one that I was going to be selling furniture for the rest of my life. I worked in Boyles as a delivery boy and not withstanding my frail structure, they put me on a delivery truck to haul stoves to second floor premises. Then I handled the store elevator covering three stories which didn't have an automatic stop. During the Christmas season we'd have a pile of customers on the third floor and I'd try to judge where the first floor was and end up sliding clear to the bottom and have to go back up again. HB: You'd better start telling her what happened to change your life. EB: I haven't got that far yet. Anyways, after I got out of the war, I was twenty-three and I was looking for companionship. I had bought a car during the war for my family, who had never had one. I met a girl and we had a relationship. Her name was Gloria and her dad was the music instructor at Weber College. Things were progressing. I was an avid skier and we were in Snow Basin and I told her she 23 needed to learn to ski faster and she went down and fell and broke her leg. Things went from bad to worse after that. Another day, I was at Snow Basin skiing by myself. I was the last man on the hill. The ski patrol had gone and I wanted to do one more run. On the way down, I fell and spun around and stopped near where the gate was. I got up and decided I was okay, so I was going to do another run. Remember, there was nobody on the hill. I got on the ski lift and about half way up, my left knee started to hurt so bad I couldn't stand it. I rolled off the lift at the top. It was dark. I zigzagged my way down the hill, sitting down all the way. It took me an hour to get down. I went to the doctor and found out I'd blown all the tendons in my knee. I had my knee in a cast and I was the house boy at the Pi Phi house in Salt Lake. I was living in the basement with about thirty Pi Phi's as residents; one of them being my sister. I got all the dirt about what had happened on dates—the girls would sit at the kitchen table talking about their dates as if I didn't exist. One day a group of young men in the lounge were talking about the Thunderbird school in Glendale, Arizona. I thought, "Wow. That sounds good." So I made an application to enroll. I was accepted—I still had my leg in a cast. I set out for Phoenix by myself in the winter with my left leg in a cast. I got near Cedar City and it was black ice and I skidded off the road and tipped over in a ditch. This was 6:00 in the morning. I got out and hobbled down the road to an all-night café. There were several patrons in the bar who offered me a drink before they went out to put my car back on the road. I arrived to Thunderbird school and decided I wanted to live abroad and work for an international company. 24 I decided I needed to work on my command of the Spanish language. My friend and I traveled to a small university in Morelia, Mexico. We lived rather sparingly with a Mexican family. After studies in Spanish, it came time to go home. We had practically nothing in our pockets, so we boarded a bus to Guadalajara. There were more chickens than people on the bus. In Guadalajara, we had no money for a hotel, so we went to a flop house that had a hundred beds or so. Bill and I went in and paid and we agreed that one would sleep and the other would stay awake because someone might assault us if we were both asleep. We had to go third class on the train to Nogales, Mexico. That was a laugh because it was full of immigrants heading to the United States and they were all pretty liquored up. We had no money for food, so when the train would stop, we'd get a stock of bananas. We were on the train three days and all we ate was bananas. Close to the border, we got off the train. Bill left his U.S. passport on the seat and had it stolen. Going through customs in Nogales, Bill went to jail because he didn't have a passport. Then they put me in jail because my passport, when we'd gone into Mexico with friends, had been stamped that I had brought a car into the country. So I was put in jail until they called the owner of the car and verified that the car was in Mexico City. I don't remember how Bill got out of jail. That was a journey never to be forgotten. After we graduated from Thunderbird—the beauty of the school, is that the people who hire, came to campus. I was prepping to get a job with Sears Roebuck. A friend of mine had scheduled a meeting with a Citibank officer from New York. When Citibank found out my friend was married, they said no. My 25 friend said to me, "Ted, why don't you interview in my place?" I asked for an interview and the first question their man from New York—Gordon Bullock— asked was, "Why do you want to go to Latin America?" I said, "I have an uncle who runs the largest sugar cane factory in Puerto Rico and if you hire me, I think I can get the account." I made it up off the top of my head on the spot. [Laughter] I walked off to get ready for Sears Roebuck and a week later I got a telegram saying Citibank had accepted me. They had to write for references. Not far from me lived two very powerful lawyers, George Lowe and Roy Thatcher. They wrote letters to Citibank. Then I asked my dad, "Dad, I'm at a crossroads here. I don't know anything about Citibank." My dad said, "Ted, the only people who are important in Ogden are doctors, lawyers, and bankers. Go for it." I accepted Citibank and said goodbye to Ogden. I got on a train to New York and went to the YMCA with the other trainees. I stayed seven days in New York and they shipped me off to San Juan, Puerto Rico. San Juan was our training base for South America. The people there were very friendly, we practiced our Spanish, and we learned about banking—that including carrying the golf bag for the managers when they went golfing. My family came to see me. They had never been out of Ogden, Utah. My mother has a diary of everything that happened. She even wrote about my dad listening to the motors on the plane. We had a lovely time. I think that was the biggest thing to ever happen to them in their lives. As it came time to depart from San Juan, they told us, "You trainees have three choices, you can go to Havana, Cuba," which was pre-Castro, which was a 26 great place, "or you can go to Mexico City," which was number one, or Bogota, Colombia. I'd never heard of Bogota, Colombia. For some unknown reason, I chose Bogota. I arrived in Bogota at 8,600 feet in altitude. It rains about every other day. It's in the top of the Andes with ancient Indian culture all around it. I settled into an apartment with another trainee and we lived the buena vida—the good life. He was a football player from Ohio State named John Mack—a very joyful guy who would fit in any crowd. We played fifty-four holes of golf in one day. We had a great time. We dropped golf balls out of the windows to watch them bounce on cars and roll down the street. A friend who liked to drink went out and got locked up and couldn't find a way home. The police called the wife of the other man with him and asked if she wanted to come down and bail him out. She said, "Hell no. Leave him in there." She was furious. Anyway, we had a wonderful time. Our chief officers at the bank were Boice Nourse and Juan Sanchez, a Castilian from Spain. It was just idyllic. We would play Liars Dice at the Anglo- American club and whoever lost would pay for lunch. We'd play against the manager and he wasn't very good at concealing his thoughts, so we got a lot of free lunches. We used to have vacations—we would get three months off after every two years and they'd put us on the Grace Lines ships to go up to New York. I'd go back to home in Ogden and I'd bought a car—my original car was a 1942 Chrysler Sedan that I'd bought during the war, then I bought another that I think was a Ford. Back in Ogden, I reunited with my old friends but I felt like I was out of place with them. In the interim period, I was doing well in the bank and 27 learning about the theory of banking. Citibank was the world leader in international banking. We worked with governments and with major organzations and their subsidiaries. We were not oriented towards individual banking. We worked with big-ticket items. In one of my trips North, I met a young lady from New York City, who was on the cruise with her mother. We became involved and were engaged when I went back to Bogota. One day I was working on the bank platform in Bogota and this young woman walked in and stopped the music. She walked down that platform with her gorgeous black hair and I thought this was the girl of my life. I hadn't even met her. When she walked in, I just thought, "Where have you been all my life?" ROH: What year was that? EB: That was about 1951. We dated about eight months. The bank had a policy that you could not date employees and I was engaged. I had a dilemma. I talked to my general manager, Boice Nourse and he said, "Ted, we'll make an exception as long as you play the rules of the game." Hazel loved peach melbas, so I asked her out to get one with me. I kind of dallied around. Finally I went out to meet her parents and find out if they were willing to let her date me. To the very strict in Latin America, this is how you go about dating. When her father saw that we were getting serious, he wrote the State Department to find out if I was married. He was worried about the Mormon religion and if a polygamist might be after his daughter. 28 Hazel and I started dating and I was in seventh heaven. I couldn't believe it because of the age difference. But we dated and then I got really sick. We had an idiot bank doctor and I went to him and said I didn't feel good. He said, "Do you chew gum?" I said yes. He said, "Then stop chewing gum." Well, I got worse and I started turning yellow. Hazel got worried and I went to another doctor. He said I had Hepatitis and he wanted me in bed resting immediately. I was in bed for three months. All I can remember of the treatment was that I ate a lot of hard candy because the doctor wanted to build up the sugar in my body. I had written to my fiancé in New York and told her that things had changed. She showed up in Colombia. The bank was having a big party and I ended up with Hazel and my fiancé in the same room. I just about died. I said to myself, "What have I done to deserve this?" I managed to make it through the night. I made the break with my fiancé and she went back to New York. Hazel's dad came over all the time while I was sick. He taught me to play bridge and he spent a lot of time with me. I think he was trying to make sure that this thing was real. His name was Edward Pierce Roskruge. Let me interrupt here to say that Hazel's biological father was German who I think was connected with the Colombian Air Force. When the world war came, he was called to duty back in Germany. Then Edward Pierce Roskruge married Hazel's mother. He was a wonderful Englishman and always very correct. I fell in love with him right away. He was there when I needed him. Anyways, so I managed to get out of bed to get married. We had the wedding in her house with a Catholic priest. It went well but Hazel had an affinity 29 for dolls. She had a huge doll she loved that she wanted to take with her as we were packing for the airport. I said, "No way, you're not taking that doll on that plane." ROH: How old were you two when you got married? EB: That was 1952. I was thirty years old and Hazel was seventeen. Anyways, we got to Barranquilla, which is a seaport at the head of the Magdalena River. Hazel took to married life with vim and vigor. She learned how to cook. She was a wonderful hostess. People there loved her. She became very active in the American Woman's Society. At that time, we made a lot of friends in Barranquilla. They had an international golf tournament one year and one of the players was a young man named Arnold Palmer. We were privileged to meet him and have drinks with him. That was the beginning of his career. My mother and father came to Barranquilla to visit over Christmas and that was a real treat for them. At those times, I rode the city bus. We didn't have enough money to buy a car. At one point, we were in dire circumstances financially. Hazel's father had given her a very expensive bracelet with gold in it and unbeknownst to me, she went to a pawn shop and sold it. When I found out, we went back to get it but it was gone. It was tough in the early days, but it was a learning process. My supervisor was from Brooklyn and from the old school. He was very gruff. He and I had several personality clashes. He would say, "This is the way we're going to do it." But I had a feeling that my ideas were better. When we got to the point where we didn't get along, I would go take a walk around the block 30 and then come back and sit down. He knew what he was doing but he did it with the old style. He hadn't arrived into the twentieth century. Among the American counselors was a gentleman named Harry Shlaudeman, who was a vice council and a super golfer from Pasadena, California. Harry, through his career, became the right-hand man for Henry Kissinger in Washington. The head American council was an elderly Scotsman who loved golf. One morning we were alerted that he was missing. We looked for him for three days and eventually he showed up and said, "I just fell asleep." We really enjoyed life there. When it came time to start a family, I witnessed the birth of our first daughter, Sharon Elizabeth. Everyone said she was beautiful just like her mother. Our second daughter, Linda Kay, was born in Cali. We almost lost her but she survived. When it came time for us to move to Cali, Columbia, I had the title of Pro-Manager. It sounds better than it was. I had been a sub-accountant. ROH: Why did they call you a sub-accountant? EB: It was something to show that one was just starting a banking career. We got our orders to go to Cali, Colombia. Cali was a wonderful place and we settled into a very nice house and I became the second in command there. I eventually became manager of that branch, which was a big success. We were very prominent there. I was president of the American Men's Society and Hazel was president of the American Women's Society. ROH: Tell me a little about these societies. 31 EB: It was a consortium of Americans who were working abroad and assigned to Cali. It was similar to a Kiwanis Club. The Americans and some prominent Colombians worked together to promote service activities to the community. Cali was the a center for the production of sugar cane, which is a major source of income for the Colombian government. We also had many pharmaceuticals plants, Quaker Oats and other multi national companies. Political unrest and local violence were causes of concern. In one instance, we had gone to a cocktail party at the American councilor's home and when Hazel and I got back in the car, I said, "Oh, it's drafty." Then I realized someone had removed the entire front windshield of the car. After that we would go down to an automotive spare parts store and see our windshield and buy it back. It was petty thievery. Another thing was if you were driving in thick traffic and had your arm out the window thieves would take your watch off your wrist. Cali was in an earthquake fault zone. One night I heard this thunder like a train approaching the house. It was a tremendous noise and the house was shaking badly and shook for about two or three minutes. It was a major earthquake and there was a lot of property damage in Cali. The next day we had big cracks in the masonry of the house. We were very fortunate in the banking industry to deal with high class business houses and individuals. We also had banking relationships with the Colombian government. There were very little dealings with individuals. Kim, our third daughter was born in Cali. I never questioned the superb quality of medical facilities in Colombia. So, our third daughter arrived and I'd 32 send telegraphs to my mother and father, "I've got another queen in the family." The girls went to the American schools in Cali. All of my daughters had dual nationalities, Colombian-United States of American, until they were twenty one. They were brought up strictly by their mother in the Catholic Church. From Cali we were transferred to Medellin. People associate Medellin as the center of the narcotic industry in Colombia. At that time there were no problems with narcotic trade. The only political parties were liberals and conservatives. There was a fierce political battle which was a concern. We had problems with rioters in the street in Cali. We had to close the branch because people were being shot in the street. Castro arrived with Che Guevara in Bogota and from that sprung out these problems with peasants up in the mountains who were ill-prepared to make a decision. They entered the Colombian political system of 1949 in addition to the conservatives and the liberals. It was a problem if you were in the wrong place at the wrong time. There were instances when it was rather dicey to go certain places. An uprising would happen overnight and you would get caught unawares. But I do want to add that in Colombia, bull fighting was famous as it was in Spain. Bogota was very much connected to Spain. We still have films of bull fighting. My career was blossoming. I had been named manager of the branch, which was a major move. ROH: Can you give me an idea of the size of the branch? EB: I had over a hundred employees. The currency was pesos. When I arrived, the peso was at par with the dollar—if you had a peso, you had a dollar. When I left, 33 the peso was something like two cents to the dollar. It completely devalued. Much like what is happening in the United States right now, the government's economic policies were off-key. By the way, coffee represented a major portion of their exports and they lived off that, but they had almost every major natural resource but they lacked the funds to develop. They were passed by other world countries that didn't want to put money into Colombia at that time. So, the economics at times got out of balance at times. The Brazilian coffee was a lesser quality. The Colombian coffee was called "mam"; which meant "Medellin, Armenia, Manizales." That's the high grown coffee; the higher the area it grows the more valuable it is because it matures slower. Medellin was my next step. It was a larger area and more responsibility. It was the center of textiles for most of South America. Again, we were very favorably invited to join the community there. It was group of outstanding people we were associating with—both the Americans and Colombians. The manager of Citibank was on par with the American consul, as far as prominence, in any city we were in. So we were always on the top of the list as far as invitees for whatever might be going on. In Medellin, we had the fourth addition to our family. Sarah was born premature and it was almost a tragedy. The hospital there took such great care of her. There wasn't a minute when there wasn't a nurse there looking after her. That was our family. After our fourth daughter, I said, "That's it. I'm surrounded by women." But anyway, I think being in the international banking circle, you're dealing with people who are intelligent and sociable, usually the moneyed class. It was a 34 wonderful world. It encouraged you to step up and be a part of it. We dearly loved that. The one major incident when I took my life in hands was when I bought a car in Bogota. The individual had a late-model car for sale and I had to fly to Bogota to get it. My boss said, "What are you doing?" I said I was going to drive it back to Medellin. He said, "You're crazy." The road from Bogota to Medellin was undeveloped and had very few facilities. At that time, there were uprisings with the natives attacking buses, dragging people out and cutting their heads off. They called it "Corte de Franela." There were several massacres in that area. That was in the back of my mind, but I said I'd travel at night while they were asleep. So I left Bogota all by myself. I drove maybe seven or eight hours through areas where I saw nothing except a paved road. It was eerie and I kept thinking, "What am I doing?" I arrived in Medellin at about 5:00 in the morning. Hazel was thrilled that I made it. It was an idiotic thing for me to do. EB: Eventually, we sold that car and got a good price for it. Hazel was driving it about three days before we sold it and there was a truck parked with a piece of lumber sticking out of it. She went too close and the lumber went right through the front windshield and all the way back. She was okay. I went to the guy I sold it to and I was really upset. He said, "Don't worry. I can get a new one from Miami." We got a lot of letters from corporations saying thank you for the attention and help I'd given them as they got started in their business. I was on the board of directors of companies where we were involved in Medellin and Cali. They 35 wanted a local director with banking experience on their boards. They'd send the Chairman of the Board down to Colombia and I'd take him golfing. In Medellin, we were honored as a well-managed branch. I got letters saying that and that helped my career. I was a stickler for details and communication. ROH: Did you travel back to the states as part of your work? EB: No, we very seldom would go back to New York when we were in a foreign branch. Except when we were on furlough, I would normally spend a week or so in New York on my way to vacation. Hazel would take the children while I was in New York. I don't know how she did it—traveling with four young kids. She was a marvel. There was a group of expatriates in Medellin who ended up in Fort Lauderdale, Florida after their careers in Colombia ended. There seemed to be an exodus of American workers in Colombia going to Florida after. It had a Latin complex in Florida, and the weather was similar. After Medellin, I got a promotion and orders to go to San Salvador, Central America to be the manager of a huge branch there. They didn't have a house for us when we arrived, so we had the privilege of staying in a very high class hotel for about three months. That was a good life for Hazel. She didn't have to cook or anything like that. In El Salvador we had a problem with earthquakes. El Salvador lies right on a fault line. We had several earthquakes while we were there. Anyway, I was second in command at the branch in El Salvador. Our major clients there were coffee exporters, almost entirely. Then we also dealt with the Salvadorian government directly. We were on intimate terms with the president of El 36 Salvador. The ambassador to El Salvador was a gentleman from Phoenix, Arizona and his last name was Castro. He looked like a Mexican bandolero— black hair, moustache, had a gorgeous blond wife. He would call the American business leaders to a meeting on Wednesday and he wanted all the information he could get about what was happening so that he could report back to Washington. I was president of the American school there. We had Joe Borgatti, who was an innovative vice president. He did a lot of things of which nobody had ever heard. Nobody at CitiBank, at that time, had the privilege of having an airplane available to the chief officers. Joe said to them, "I'm in charge of Central America—Honduras, Guatemala, Nicaragua, Panama, and so forth. I want to get a plane." So we got a push-pull. It's a plane that has a propeller in the front and one in the back. One of the things I organized down there was a league of soccer teams. Citibank was the champion of the tournament. Two things while we were there. One was when President Lyndon B. Johnson was trying to form better relations with Latin America. They decided they were going to have a big meeting in San Salvador and invite the heads of state from Central American countries. Citibank was encouraged to be a part of this meeting. The Mexican embassy said that Johnson liked cuff links with coins from the country he was visiting, so I was assigned to get to the local jewelry store and get some coins that were delivered to him. We were part of the big entourage. We met the President and his wife and the two daughters. 37 The other thing that happened in San Salvador was the Chairman of our Board, George Moore, who was a genius in my estimation. He decided to come down with his wife, who was from a very prominent Mexican family. She was not very sociable. We decked out his room with flowers and when he walked in, he said, "Is this for my funeral?" He had all of the young, gung-ho businessmen in San Salvador come to the swimming pool at 6:00 in the morning and swim with him. Then he would have breakfast with them and talk about business. Hazel was in charge of a party for his wife. Hazel carried it off perfectly. The two big events were that we were going to take them around in our plane and show them Honduras. The plane was small and Mrs. Moore was rather large, so when we went to get on the plane, she said, "George, you think I'm going to get on that plane? Never." She walked off. We had to run around and get a commercial plane to take them. The crowning event was a party on an island resort owned by the coffee barons. I happened to be walking along the path and Mrs. Moore crossed in front of me and she wanted to sit down. I suggested she sit in a hammock. Well, she got in the hammock and it broke. She's on the ground and said, "Don't touch me." I said, "I'm going to get fired whatever I do." I didn't dare touch her. She rolled off and dusted herself off. One of our prominent clients was elderly but liked to fly. He flew his own plane over there, but the weather worsened. He insisted he was going to fly back to the air base. His son told him not to so he took off unbeknownst to them. He took off into the clouds and got lost. The Salvadorian air force had to find him and guide him down. 38 There was a war of sorts between Colombian and Honduras. They called it the "soccer war." They got very serious about soccer. I think the end result was a Honduran plane dropped a bomb in the ocean near a port city. There was no actual exchange, but there were a lot of words. The president of the country would ride around on a motorcycle; he was very flamboyant. He would come to our office like that. But the people we dealt with were delightful. Most had made their money exporting coffee. We carried a lot of memories out of that. A lot of our clients were from the moneyed class and they didn't want to deal with Salvadorians or Hondurans or Colombians for tax reasons, so they wanted to confide in us. We were an intermediary. ROH: How long were you in El Salvador? EB: Three years. I was the manager and we had about twelve officers reporting to me. ROH: Did you have the young rookie kids like you coming up through the ranks? EB: We had people who were doing what I was—coming up through the ranks just two steps behind me. We always had trainees or American staff. Then they decided that I needed to go back to the domestic side, so we packed up and ended up in Wilton, Connecticut. The agent who sold us the house was married to a man who was a Citibank manager. We had minimal funds to invest; I still was not making any money. But we let her take us around to see houses. This was 1965 or 1966. She asked how much money I had and I said I had about $46,000. So she started showing block houses to Hazel. Hazel didn't like them. Nora said she had another that might be available. It was a two-story colonial 39 home with two acres of woodland with an immaculate four bedrooms. It was everything you'd ever want. Hazel wanted it. Nora said it was out of our price range. Hazel said, "That's my house." We managed to get that house in the low-forties. It was idyllic. In Wilton, I commuted on the New Haven railroad for five years. I think it was from 1968 to 1973. I was working in our head office in what we called the Overseas Unit for Individual Banking. People from all over the world would come in and want to talk about their money in Liberia and Japan, and so on. I worked in that area during those years. Wilton was a wonderful area. The highlights there were two intercontinental trips from Wilton, Connecticut to Long Beach, California in a station wagon. Those trips were classic. I told the girls that they'd seen the United States from thirty-thousand feet but that they hadn't really seen it. Well, we got into the station wagon, loaded to the gills, with the four girls in the back trying to get comfortable. We'd go from one stop to another and see things along the way. We always stopped at the Holiday Inns and the girls went straight to the pool. We traversed the country and saw everything. The girls saw America and it was a great growing-up experience. My parents lived near Long Beach and whenever we went there, we went to Disneyland. The cross-country trips were invaluable. I kept them on their toes with games like, "First one to see a white horse or a yellow Volkswagen gets five cents." It was something that created memories. All of them talk about it. One memorable trip, our youngest, Sarah, was about five or six years old. We 40 stopped for gas and drove off and we were a mile away when we realized we'd left her. Nobody had counted noses. We got back and she was crying. It was one of those things. Hazel and I fell in love with Disneyland, too. On our fiftieth anniversary, we all went to Disneyland and they bought two blocks with our names on them in the area where they sell your name and it's there for eternity. ROH: When did your parents move to Long Beach? EB: After I left home. My dad had several close friends who had moved to Long Beach. Dad became an avid golfer at sixty-five and played almost until his death. My brother had lived there most of his life. My sister did very well there. Those trips across country were something else. The girls graduated from Wilton High School. Then they got ahold of me in New York and said, "Ted, how would you like to go to Monrovia, Liberia? We've got a branch there that is the central bank for Liberia and we also do international banking from there; it's an important link for us in West Africa." I went home and told Hazel. If I had been married to an American, I think I would never have had the opportunity to go because an American woman probably would not have adjusted. Hazel said, "Let's go." We got out library books and I got a post report. The first thing that caught my eye was that we had a house in a fifteen-acre strip with six other houses. That area around Liberia contained six of the most deadly snakes in the world. That influenced Hazel to buy riding boots for all the girls so that when they walked through the grass, there would be less of a chance they'd be bitten. There was also a lot of malaria. Our doctor gave us pills, which I think affected us all later in terms of our eyesight. We arrived there with a 41 dog and a cat. Our house had a river behind it that contained crocodiles. There were other animals, like apes and things. We were in the middle of an animal kingdom. When I got into the branch I got a shock. I didn't have a problem with blacks, but it was a cultural shock to walk in and see everyone in the branch was black except the manager and me. There was an adjustment there. We settled in and found out that we were the kingpins as far as the American banks there. The president of Liberia thought nothing of coming in at whatever hour of the day or night and saying to the manager of the bank, "I'm going to New York. I need some traveler's checks." We'd have to open the branch and get that for him. We had a problem with labor relations. The employees decided to strike because their white managers did not understand them—that was I and the other manager. We were in the hot seat there for a while. Hazel developed a friendship with the wife of the President through the American Club. They had a graduation ceremony and Hazel loaned Mrs. Tubman one of her chairs to sit on. During the ceremony, the lights went out and it was raining cats and dogs. They brought out some lanterns. It was a comic graduation. We were invited to a wedding of one of our employees. We were the only white couple there. When we saw the cake, there was a colony of ants crawling over the cake. The cultural shock—you learn to adjust to it and get involved with it. They had golf there but the greens were tarred, they weren't grass. The caddies didn't wear shoes so they'd go out into the rough and pick up 42 your ball—which is illegal in golf, but they wanted a tip—and there were snakes all along the fairway. From time to time, we would transfer money that was depreciated to the central bank. We had a cash officer and two guards when we took that money over to the central bank. On one day, we had branches up-country and he went to the cash officer said he wanted to take money over; I asked how he was going to do it. He said, "Our two Monrovia trucks are busy, so I'll get my chauffeur and my car and get a guard from the bank." I said, "So be it." So they drove over and parked in front of the Monrovia Central Bank. The guard got out and the driver stayed in his seat. Before the guard could get the money out of the car, the driver took off with the money in the trunk. We found the abandoned car. It was a national catastrophe—it was all over the news and all the borders were closed so they couldn't get out. For two days I was waiting. New York told me I'd better get the money back or I was in trouble. So, the guy who stole the money went to his brother's house and they buried it. The one who stole the money took enough to get to the Ivory Coast for vacation. There are two episodes. The guy with the money waiting for a taxi to take him to the Ivory Coast that's fifty miles away. The taxi driver said, "You haven't got enough money to get to the Ivory Coast." And the guy said, "Here." He put the money on the seat and the taxi driver drove off with the money. This is comic. Well, they got a hold of the guy and shook him down and he admitted to where the money was. It was wet and they were digging it up and all the bills were sticking together. So the Treasury Department said, "You've got to be down there 43 while we count this money." I spent three hours there while they were peeling dollar bills to be sure we got all the money back. Another thing—and this one was scary—Hazel and I, and our daughter, went to a show down in the center of Monrovia at night. Coming back, the car stopped. Hazel and our daughter pushed me over the bridge down to the bottom where there was a house. I knocked on the door and a guy came out. I said, "Here's ten dollars, if that car is still there in the morning, I'll give you another ten dollars." We took a taxi home. The funny thing was that our daughters were dating and they wanted me to take them into town. The roads were very narrow and had big drops. This was tribal country. So I'm going along the road at night and I see this car coming towards me on my side of the road. There was no shoulder and I dropped down about ten feet into a ravine—still upright with two of the girls in the back seat. Within five minutes, there was a tribe of indigenous people swarming the car. I thought we were going to be cannibal soup. Well, it took about twelve of these guys, but they helped get the car back up on the road. The compound had a guard at night. One of our junior officers was coming in at night and he went over to him and shook him. Well the native went over to his tribe headquarters and said he had been assaulted by an American. The tribal chief ordered that this man be arrested and go into a tribal court. The bank immediately said, "That's a problem." The only way we saved him was to transfer him out of the country. Then we had an incident of inside robbery. Hazel and I were sleeping in bed with our golden retriever next to me. My wallet was two feet from me. The 44 next morning I woke up and saw my wallet was gone. What had happened was we'd had a thief who had come in with a screw driver and broke through one of the windows. He got into our room and the dog growled but we didn't pay attention. The thief stole my wallet, then went down to the St. Paul River, took everything out and dumped the wallet. At that time, Liberia was ruled by elitists, the people who came by boat from the United States. They had the money and they ran the country. About ninety percent of the people had no money and had been kept under control by the people in power. Just after we left, they had an uprising where they took the president and his cabinet down to the beach, stripped them to their skivvies, and shot them. They gunned down the President of Liberia and eight counselors. That was when this John Doe became famous and was running the country and now things have calmed down. But it was a very serious uprising of the have-nots. Mind you, when they had a parade, they wore top hats and they wore canes—they didn't have any guns. It looked like Laurel and Hardy. We were there about three years and we were packing up to go back to the States—we'd about had it at that point. ROH: Were you doing better financially by this point? EB: No, we were barely hanging on. Anyway, we were scheduled to go back to New York after that tour and one of our senior officers from Athens, Greece was in Liberia visiting. I was talking to him and said I didn't want to go back to New York. He said, "Okay." And the next thing I know, my superior at the branch said, "How 45 would you like to go to Beirut, Lebanon." Well, there was a war going on there. But again, Hazel said, "Okay, let's go." It was eerily quiet when we landed at the Beirut airport. The taxi driver took us to the Bristol Hotel, which was one of the best in the city. We registered and Hazel and Sarah were the only females in that hotel for about three months. They were treated royally by the staff. It was an indication that it was a very dangerous situation. One day Hazel and I decided to go visit the ruins in Syria. Word got around that Boyle and his wife were going to visit the ruins. We got in a taxi with a reporter from New York. We rode up into the area occupied by the Syrian army. We got into Baalbek and we were stopped by Syrian police. They took our passports and wouldn't give them back until we left. The ruins were spectacular. We were the only tourists in any form in that area. We had so many near-misses in Lebanon. They burned the American Embassy. We were located on the Mediterranean in a high rise. We were on the seventh floor and there was a Saudi prince on the eighth floor. Unbeknownst to us, we were in a PLO area—the western side of Beirut was headquarters for Yasser Arafat. We had a bank there called the Bank of Lebanon and Kuwait. It was fifty-fifty with the Kuwait royal family. Our principle objective was to recover investments for our clients because of the war. We were in a tenuous situation. One of the most dangerous things I've ever done—I was obliged to do it. We had branches on the east and west sides of the city. The west was the Muslim side and the east was the Christian. There was a dividing line between them. At one point, the leaders of the Lebanese government decreed that they 46 were going to get some insurance money from the bankers in the area for protection purposes. They approached our offices on the east side and said, "We're going to keep people around here to protect your branch, but it's going to cost you this much." It was not a threat, but in order to continue to bank without being hustled or having people break into the bank, we sent the proposal to New York. They said, "Absolutely not. We cannot be taken to court on that type of issue. Just send down an ultimatum: we do not accept these terms." Well, someone had to take that message to the people in authority. We drew straws and I got the short straw. They said, "Ted, you are going to be an emissary. You're going to drive through an area that's highly contested on both sides and you're going to carry this message personally." I had to go down this road with enemies and firepower on both sides. We stopped near the headquarters of the Lebanese presidency. We were searched and they sat me in the hall to wait. One of the men that was ruling the country had been educated in the United States, so he had an English background. I was brief about it. I told him, "This is what has happened and we've been advised by our headquarters that we cannot do this." He said, "I understand." He shook my hand and I walked out. That was scary. With all this going on, it was very dangerous. Quite frequently, Hazel and our daughter would be flown down to Athens and I'd stay behind. When I'd get to go to Athens, I'd stay over the weekend and come back. The pilot would say, "I've got to find out which runway is open. There's firing on the north side, so I'm 47 coming on the south side so we won't be hit." While we were flying in, there were missiles flying around the airport. ROH: What did you think of Athens? EB: Athens was a dream come true. I had seen a little of the ancient history when I was in the Air Force in Tunisia—the aqueducts and all that. But when I walked around there, I just felt eerie, like it was unreal. It was hard to imagine the history that you were walking around. When we left Beirut, we didn't find out until we were ready to go that our body guards and the people who were hanging around in the lobby all the time were PLO—they were protecting us, unbeknownst to us. The golf course in Lebanon was laid out on the edge of the PLO firing range. The ambassador, I was told, carried a machine gun in his golf bag when he played. We had shrapnel coming down on us while we played. ROH: Did you have friends there? EB: Thanks to Hazel, we have had friends everywhere we've gone. We were involved with the government because of the banking industry. They had the American school there and this is where Hazel and our daughter were baptized. I got the idea, having bombed Europe and seen the desolation and the destruction, Beirut reminded me very much of a destroyed city. They had destroyed the business sector. Buildings were derelict. It was a mini world war for me. ROH: Did that cause problems in business for you? EB: Oh yes. This was an extreme case of merchants who took advantage of the situation and refused to pay us back. Recovery of assets was very difficult. They 48 knew what the situation was and we had very little clout. You never knew who would be the governing body. We were going to the airport, leaving Beirut, and our driver, innocently, drove through a road block of Syrian soldiers. They were ready to shoot us with machine guns. Another car drove into the line of fire and stopped—in other words, they couldn't see us anymore. He overtook us down the road and said, "I saved your life, what the hell were you thinking?" Our driver thought they were telling us to go on. That was our departure from Beirut. We went from there to Karachi, Pakistan. That was in turmoil too. The president had been convicted of crimes and they were going to execute him. They had killed several marines in our embassy in Islamabad. We got word from New York to get out of there. Hazel and our daughter were flown down to Athens again. I went underground with our people. It was a very tenuous situation when we first got there. There was a lot of demonstrating in front of the bank. Again, our bank worked closely with the government. Pakistan is famous for its textiles. They had an industry down on the coast that broke up old ships that were battle-worn. There was a big industry there for that. They had oil deposits, too, but textiles were their strongest industry. The entertainment there was centered around the American school, which was a premier school. In fact, the Pakistanis who had money would be on waiting lists for years to get their children in the American schools. I was on the board there. In fact, the head of that school was here recently in a tennis tournament for seniors—Tony Horton. He had traveled all over the world as the head of 49 American schools. We had, again, a very closely knit community. We were there for about three years. ROH: Was it better than when you were in Beirut? EB: Oh yes. There was an underlying community of the have-nots. The countries we were in at this time had a high rate of poverty. As a result, there were riots in the cities. It was a learning experience again. ROH: At this point were you thinking about retiring? EB: No, I was still active. I had become a resident vice president. My duties were managing our portfolio—the quality of our loans and making sure people were paying and all that. We took several tours up into the area where the book Three Cups of Tea was written. We were in that area, not quite as high as he was. It's very rural. It was kind of scary in a sense that there wasn't a real feeling that you didn't belong, but you had a feeling that you might be better off if you weren't there. The populous in Karachi was horrific in terms of slums—water and sanitation was a horrible mess. I understood why the have-nots had uprisings. Of course, spinning off from India, there was always a feeling that India was their big rival and there was a fear that India would come after them, and then they had the nuclear problem down there. Pakistan was a tinder box. After Pakistan, we moved over to Riyadh, Saudi Arabia. That was an eye-opener. The bank there was called Saudi-American Bank. It was fifty percent owned by Citibank and fifty percent owned by the royal family. We also had a subdivision for females only. There wasn't a male teller in that division. We had 50 lots of meetings and instances—one where we had a Saudi princess with a lot of money who had a farm development out in the desert. They desired to have their own wheat, which cost ten times as much as it would have to import it from Canada. They have pivot wheels out in the desert with the wheat growing out there, and then the Saudis would have their estates out there. I was invited by a Saudi and the princess arranged for a luncheon. She had about sixty pieces of chicken for three of us for lunch. Our dealings there were really something. If you invited a Saudi of any importance, the wife never came. You never saw their wives in a social engagement. And there was enormous segregation. One of the things they told me was, "If you're driving down the street and a Saudi runs into you, you're liable. They say it wouldn't have happened if you weren't there." The philosophy is that you caused the accident because you were residing in their country. I had a terrible incident there with my health. The Saudi hospitals are staffed by Americans and have our equipment; it's just like an American institution, but only Saudis can utilize those services. My condition worsened and it was decided that I would leave the Kingdom. Our driver took us to the airport and I found that I had a missing document. They said I had to go six blocks to another location to get the document, but the plane was on the runway taxing without me. We raced over and they actually held the plane for thirty minutes for us. I was on that plane for thirty hours in terrible straights. But what I'm going to say is that if anyone in the royal family has hay fever, they head to Walter Reed hospital and take up a whole wing. 51 We dealt with Osama bin Laden's father. He was one of our biggest clients and continues to be one of the biggest powers in industrial equipment in Saudi Arabia. I can't document it, but I think Bin Laden was employed there in Saudi Arabia while I was there. It's funny. You don't have any poverty in Saudi Arabia. It's set up so that if you get in line and go tell the king you need a washer or whatever, he gives you the royal handshake and gives an order. You don't see poverty because the people with oil money keep the populace happy with that type of thing. They say, "Hey, I've got money." But religion—if they think that you are even getting together for religious purposes, they kick you out of the country. They consider that a deterrent to the kingdom. So Hazel and her friends would have secret meetings. They were told not to park close to the house, they would walk so that no one would see the cars together and think, "We got one." Our Air Force guarding the kingdom is a deterrent to the kingdom being overthrown. I think, militarily, our presence has been a big thing in saving the kingdom. Another thing that's interesting is once the Saudis get into the Saudi planes, they'll exchange their royal robes and put on their jeans. ROH: While you were there, was your daughter still with you? EB: Our youngest daughter was a threat—in other words there were restrictions that a young female could not enter the kingdom. They didn't want any western women walking around with the Saudi boys looking at her. So she couldn't get a visa to get in. I don't remember, but I think their laws prohibit interest on loans, making it extremely difficult to bank at a profit. You had to protect yourself with 52 collateral outside of the kingdom because the laws there would make it so difficult to foreclose on a property. You have to play their rules. It's an extremely difficult area to bank in. After Saudi Arabia, we came back to Wilton, Connecticut. At that time, I was approaching retirement and I took an early retirement there. I was sixty-two. ROH: What position did you hold at the bank? EB: I was Vice President for Citibank. ROH: Were you finally doing okay financially? EB: I've always thought in terms of the investments and stocks. Over a period of forty years or so, I've been fortunate. But you have to be patient. The average investor today with this market and all this growling about Wall Street and what's wrong. But what do we produce now? We've lost our keys—we were the kings of electronics and technology. We've lost everything where we could say we dominated. I think most of it is a labor factor of the cost value. You cannot compete with China and India where the person is making a dollar or two dollars an hour but Detroit wants fifty or sixty dollars for the same product. But I want to talk about several vacations. We went to Cairo and went down the Nile on a houseboat from the Aswan Dam clear to Cairo. Doing everything that tourists do with all the royal burial grounds. We got off at Luxor, which is kind of a tourist trap, and Hazel wanted to get a cartouche for each girl. While Hazel was dealing in the jewelry store, the owner of the shop came over and said, "Mister, I give you a hundred racing camels for your wife!" [Laughter] 53 Racing camels were thousands of dollars; it was millions he was talking about. I told him, "Give me a few minutes to think about it." That was hilarious. Our trip to Nairobi, Kenya was fantastic. I've always thought about big game. We got down there with three of our girls and we decided not to go with a guided tour. We got out to the base of Mount Kilimanjaro and we were right in the middle of all kinds of wild game. The next day I decided to go out in our car, by myself, and find the animals. I was going along the trail and low and behold, I see three lions loping by the side of the car. We've got pictures of them. Anyway, we got in there and saw lions, elephants, and rhinos, you name it. On the way back to Nairobi, I tried to drive through a dry lake bed but it was sandy and we got stuck. I finally got onto what you'd call a road and one of the girls smelled gas. I stopped and found that the gas line had parted. The girls put it together and put some gum around it to patch it. We stopped in a village of Masai natives who were about six feet, ten inches tall. We are the only white people in the village. They all had spears and red paint. We dealt with them and got a couple of spears from them. When we got back to our hotel, we headed out towards Mount Kenya. It was a very sumptuous place which was owned by a famous movie star—William Holden. It was like an Elizabeth Taylor movie—there were all these natives with turbans on and holding rifles. At night, you had a fireplace in each cabin and they'd come in and light the fire. It was, again, something out of a fantasy land. 54 Going back with the same car, the car was stopping and starting. We had to coast into Nairobi. We lucked out. But that trip was worth a million dollars. We really roughed it. ROH: Did you hunt while you were there? EB: No, that's too expensive. We did it on an economy budget. The other tourists would get on a bus and see a lion off in the distance, but we had them running right alongside of us. That was something. We spent several vacations in Switzerland. We had a close friend from San Salvador whose husband was a hotel manager. He had a chalet in the Swiss Alps near the border with France. We spent a Christmas there. Switzerland is very orderly. They have a lot of rules and regulations, and it's hard to get in, but I said to Hazel I would live there. Then we spent a Christmas in the Spanish Alps. We did Spain while we were in Saudi Arabia. We saw bullfights and where they grew the wine and all that. We went into Russia during the Cold War. It was 1976. The big thing there was a train ride from Moscow to Leningrad overnight. There was supposed to be an elite coach, but there were four bunks—no beds. Hazel and I and Sarah got in the train leaving the station and a middle-aged Russian male came in and said, "Mine," and pointed to one of the bunks. Then he stripped down and went to sleep there in our cabin. I thought that was hilarious. We were an oddity in Russia. We were at the Kremlin looking at Lenin's tomb and they were parading some of their Mongolian soldiers all dressed up. Hazel was standing around and a Russian lieutenant came up to her and said, "I take you." He served as our 55 guide and took us up through this church we wanted to see. Then we had our English speaking guide, an attorney. I said I wanted to give him something and asked if I could give him money. He said, "Absolutely not. They'll put me in jail." But he said he liked my jeans. So Hazel and I left a package on the back seat of the bus with my jeans in it and he picked it up. ROH: Where haven't you been that you might want to go sometime? EB: I think Australia. We were in Thailand and Hong Kong. I admire the Australians. I lost one of my best friends in the battle with the Japanese down there. My dad used to sing from South Pacific. I'd like to go there. ROH: You were very successful in the banking industry. What do you attribute your success to? EB: I think it was doing the right thing, first of all. No monkey business and a perseverance in cultivating human contacts—relationships with your staff so you didn't talk down to them. Like when we went to Nellis Field and a general came out in a flight suit like a normal trainee and I thought, "That's success—getting down in the trenches." Assimilating customs of the people and trying to understand what makes them work. In other words, why are we banking here, what do they want from us, and how do we go about it. I think relationships and how you treat people are prime—also, towing the line. We went where we were told. I attribute that to my wife because she was very flexible. Without her, I may have stayed in New York and not done any of this. The minute I said, "Pakistan," she said, "Okay." There was never any discussion or complaining. I attribute my success to my wife. She was with me in the trying moments. You have to have 56 support. Now that I've been talking to you, I've asked myself, "What if I had stayed in Ogden?" I could very well have been a salesman for Boyle Furniture for the rest of my life. It's hard to picture who was pulling the strings. Hazel always said God was looking over us and I think she's right. I think somebody was directing us through all this that we did. That's my problem now, I've run the mill and I think I have no more bridges to cross as far as advance or travel I'm content to just kind of sit back. Here in St. George there is a difficulty of communication because of where we were and what we did and our thoughts and perceptions. A lot of times, people turn you off; they're not interested. You get the idea that they want to talk about the local scene and the lack of water here in St. George. If our leaders would at least look at the world and look at what makes the world go 'round—and I stress religion—and try to understand civilizations that have lived according to the Quran for thousands of years and overnight you want them to change and you said, "We've got something better than what you have." I don't like isolation. I think we've got to understand what makes the world go around. China, Cuba, trade wars, and now they're undercutting us—so what? They've done the right thing; let's learn from them. What are they doing that we're not doing? What happened to our manufacturing abilities from the '50s and '60s when we were king of the hill? I think a lot of it is political, unfortunately. But I just wonder where we are headed and what our children's future will be. ROH: Do you keep in touch with people from Citibank? 57 EB: Oh yes, I have a lot of friends in Florida who I met in Colombia. I have my ex-boss in San Salvador and New York. He owns a bank in Bulgaria. He's been featured in Fortune magazine because it's the best bank in Europe. Joe Borgatti was my favorite. He was down to earth. But you get other people who get ahead of themselves because of their title or they want to isolate themselves from you and make you a lesser factor in running the bank. I've had some wonderful associations with people above me and I've had some I didn't like. ROH: What do you think about the changes that have happened with Citibank since you left? EB: We started out with the Rockefellers. In fact, Citibank is the oldest bank in New York. Through the years, leaders of the bank came from high society and we had people in there who were bankers by trade and by inheritance and they stayed the line; in other words, they held on to tradition and what we were good at. There was no variance. We had enormous control over our assets by our auditing departments. We held on to tradition under George Moore and Walter Wriston, then John Reed who was a genius but had a failing in personal communication. After Reed, you drop off. He was the last of the Mohicans. Next you get Sandy Weil who brought all of his ideas about insurance and things we didn't normally get into. He wanted to build an empire and we lost control of what we did best. Sandy did a tremendous job of building up assets, but he lost control of the inner workings and delegated too much. Then they made a bad mistake in naming Prince the president. He was an attorney by profession and knew very little about banking. We got off track. There was a law earlier that prohibited 58 banking activities outside of a certain area, like the derivatives and things we got into later. The derivatives were the downfall, they were dealing with assets they had no control over. I think Citi Group will survive because of all the help from the government but it back-fired. The major corporations, who used to be the pillar for the banking community, now have their own in-house bank. A depositor asks, "Will my money be safe with Citibank?" This goes right back to the economy. We don't have jobs and there's no money in circulation. ROH: How did you decide to create an endowment at Weber State? EB: "I have accepted this assignment with immense feelings of inadequacy, humility, and privilege, keenly aware that the man we honor and memorialize here today was, and is, a giant whose character, thought and deeds can never receive can never receive justice by the mere force of human utterance. Dr. Jennings G. Olsen is the only person I have ever known who is unqualifiably deserving of the title genius. One who, in fact, came closer than any of my acquaintances, of being a man for all seasons, as was said of Thomas Moore. Indeed, a virtual superman. I was an eighteen year old freshman just out of high school, anything but passionate about the need for an education. Wet enough behind the ears to have narrowly escaped drowning, my friend and new found mentor Jennings G, on the other hand, a man of twenty-five soon to receive his doctorate in philosophy from UCLA, had even read and absorbed more than most academics do in an entire lifetime. Along with the rest of my fellow students, I promptly found myself astounded by his incredible knowledge and memory, prodigious vocabulary, and his uncanny ability to quote chapter and verse from everything 59 and anything he had ever read. Even more importantly, his power to analyze, synthesize, and contain this ever-growing information within a context amendable to the humblest of intellects. Impeccably dressed in starched white shirts, ties and a sport coat, slacks inevitably pressed to a crease that would cut your hand, his cheery countenance well-scrubbed and glowing with vitality. Jennings was also the quintessence of organization. His lessons on Plato, Socrates, Aristotle, and other greats, such as Augustine, were always carefully outlined on the blackboard and completed with articulate and meticulously exact due. One of his oft-expressed mottos read as follows, 'Organization and schedule are the keys to success.' Nevertheless, his presentations were rarely limited to straight lecture and he made ample provision for student response through carefully inter-related and challenging questions that required us to engage in the unique experience of actually thinking." ROH: Who wrote that? EB: Gordon Allred. This is a eulogy he wrote for the funeral. I'll give you a copy. [See Insert]. There's a picture of him at Weber College in his younger days. Let me tell you, Gordon Allred's father was Thatcher Allred, who was in a department at Weber College who was a dominating factor in stage production. His mother was a poet. He came from a very talented family. I have a book that Gordon wrote about the Japanese Kamikaze pilots. He spent some time over there with a pilot who had survived. The book is spellbinding if you're interested. HB: I don't think you told them that he was born with a handicap. 60 EB: He was born with a club foot and he participated in pole-vaulting. Nobody knew about it unless you were an intimate friend of his. He never divulged that. He had a professional singing voice. He performed in operas and sang on television. People that knew him, like I did from day one, admired his ability to surpass all of his difficulties. But he never, ever complained. I think he was a little bit above the crowd and very intellectually powerful. Perhaps it was overabundant to the average student. He delved into the topic of the origin of life in order to show students that there were two sides to the equation, but he never pushed it. He went into Darwinism and just said, "This is something that people think about it. I'm not telling you what to think." He opened their minds and wanted people to be able to think instead of just being told. From my perspective, Hazel and I had nothing to do with Weber State. Then we went into Ogden one day and saw the campus there and I decided to go take a look. Carol Biddle was the catalyst. I walked in to her office and I said, "I'm Ted Boyle and maybe I have some money to donate." She said, "First thing, I want you to read this book by Sadler." So I went home and read that book from front to back looking for indices of Jennings Olsen. There wasn't a single award. I noticed the lesser degree people were getting awards and I said, "What happened to Jennings Olsen? Why isn't he mentioned somewhere?" That triggered my interest. I went back to Carol and said, "I want to do something for Jennings Olsen." That's where it started. I think Jennings was probably not a sociable person. I think he may have isolated himself in his books and his will to increase 61 his knowledge of religion and the world. It was just his background. He came through hell and high water and he was a person who should have been eulogized at the highest level—with his physical problems and coming from kind of a broken home. I really think that Jennings was so worldly that Weber County wasn't ready for him. He got his doctorate from UCLA and I think he would have been president of the university there. I think he was misplaced and in this community he was misunderstood. He didn't get the recognition he deserved. ROH: You've created that recognition. EB: No, I haven't, and I am so displeased that not one dollar from his staff, his friends, his family—there hasn't been one. I say, "What am I missing?" You would have thought someone, in the total time he taught there, would have said, "He taught me something and I'm going to put ten dollars in." I'm being facetious. ROH: You should get credit for stepping up. EB: It's still not recognizable as something that is popular. I think it's something that's there, but it's not an attention-getter. I really think that Dr. Olsen was in the wrong place at the wrong time. His manner of attacking world religion and making people understand where we all came from. All he wanted was for students to open their minds and think. He wouldn't tell him it was right or wrong. I'm disappointed because I think I tried and there's nothing to show for it. I thought maybe it would catch fire but I think it's going to die a natural death. ROH: It's there and people can find it. We appreciate the fact that you did this because I, for one, wouldn't know anything about Dr. Olsen if not for you. But each person 62 who gives to the university does it in a way that they are passionate about. You never know what's going to happen. EB: Maybe someday it'll be like when they resurrect these ancient scholars. Unfortunately, he didn't produce any work of his own. I have personal letters but I don't know if they should be made public or not. We were so different—he was an intellectual and, as I told you, I barely got passing grades. Maybe opposites attract. ROH: Is there anything you would like to add before we finish? EB: I'm infatuated with Ogden still, though I've left, and I want to know what happened to the Ogden I knew in the 1930s and 1940s. I can imagine it was the railroad departure and the entrance of the supply depot and Hillfield. Maybe it attracted a lesser culture. But it was king of the hill—people from Salt Lake traveled to Ogden to shop. It was a place of honor. As Tom Brokaw said, "The greatest generation," I think the class of 1940 from Ogden High was the class of a generation. I'm not being facetious, but that class had more activity and more people who were going places and doing it with little resources. The final shot is the Ogden Standard Examiner. I felt that in the 1930s, and 1940s, and 1950s, the Standard Examiner got inside of what was happening in Ogden—the people and what they were doing and where they were going. It was a very informative paper about doings. It seems to me that they've gotten off track now. You don't feel like you're a part of it anymore. ROH: Thank you very much for your time.

La V Semana Internacional de la Ciencia, Tecnología e Innovación, es un evento organizado por ALIANZA SISTEMA UNIVERSITARIO DE NORTE DE SANTANDER SIES +, dirigido a la comunidad académica, científica y los sectores productivos de la región, cuyo propósito es difundir los avances en investigación y extensión de instituciones nacionales e internacionales, a través de grupos de investigación e incubadoras, promoviendo la participación de los sectores productivos en actividades de investigación, extensión, desarrollo tecnológico e innovación que fortalezcan la relación Universidad - Empresa - Gobierno y el intercambio de experiencias con investigadores de ámbito Nacional e Internacional. campos. ; CONTENIDO PROGRAMACIÓN 8 LA POBREZA COMO EFECTO DEL DESPLAZAMIENTO FORZADO: COMUNIDADES MARGINADAS EN OCAÑA, COLOMBIA TECNICA INFORMATICA PARA LA IDONEIDAD DE LA EVIDENCIA DIGITAL EN EL ATAQUE A UN SISTEMA DE INFORMACION: ANALISIS FORENSE PARA LA CADENA DE CUSTODIA DIGITAL DIAGNOSTICO DE FUGAS EN TUBERIAS HORIZONTALES MEDIANTE REDES NEURONALES TERNARY DIAGRAMS SiO2-Al2O3-K2O AS TOOL FOR THE ANALYSIS OF BEHAVIOR OF CERAMIC MATERIALS DINÁMICAS CONTABLES Y SU RELACIÓN CON LAS TECNOLOGÍAS DE LA INFORMACIÓN Y COMUNICACIÓN (TIC´s) DIAGNOSTICO DE LA MAQUINARIA UTILIZADA, EN LOS PROCESOS DE POS-COSECHA DEL CAFÉ, Y CEBOLLA OCAÑERA, EN LOS MUNICIPIOS DE SAN CALIXTO Y ABREGO, NORTE DE SANTANDER QUEBRADA LA BRAVA: EVALUACIÓN DE LA CALIDAD DEL AGUA DENTRO DE LA ESTRUCTURA URBANA DE OCAÑA, NORTE DE SAN-TANDER THE ENVIRONMENTAL MANAGEMENT SYSTEM AND CLEANER PRODUCTION STRATEGIES: COMPANY BIOCAÑA S.A.S EFECTO DE LA INCLUSIÓN DE BLOQUES MULTINUTRICIONALES COMO SUPLEMENTO ALIMENTICIO EN BOVINOS DOBLE PROPOSITO SOBRE LA PRODUCCIÓN Y COMPOSICIÓN DE LA LECHE EN CONDICIONES DE BOSQUE SECO TROPICAL EFECTO DEL ENSILAJE DE CÁSCARA NARANJA Y GLICEROL SOBRE LA PRODUCCIÓN Y CALIDAD DE LA LECHE EN UN SISTEMA GANADERO DOBLE PROPÓSITO EN CONDICIONES DE BOSQUE SECO TROPICAL PLATAFORMA DE SENSADO FOTÓNICO PARA LA GENERACIÓN DE ALERTAS TEMPRANAS EN MOVIMIENTOS DE TIERRA EN MASA DISEÑO DE UNA PLANTA DE TRATAMIENTO DE AGUAS RESIDUALES MUNICIPALES - HERRAMIENTA: PANEL DE EXPERTOS MODELAMIENTO DE UNA CELDA ELECTROLÍTICA ALCALINA QUE PRODUCE OXIHIDRÓGENO SIMILITUD HIDROLÓGICA DE CUENCAS EN LA ZONA SUR DE LA REGIÓN ANDINA DE COLOMBIA Coliformes, Pseudomonas aeruginosa y Salmonella spp., EN AGUA ENVASADA PRODUCIDA Y COMERCIALIZADA EN SAN JOSE DE CUCUTA, EN LOS MUNICIPIOS LOS PATIOS Y VILLA DEL ROSARIO. MODELO COMPUTACIONAL ARTIFICIAL PARA LA ESTIMACION FUNCIONAL DE LA VARIABLE INSULINA COMO APOYO AL DIAGNOSTICO DE PATOLOGÍAS CARDIACAS. PROPUESTA DE UN MODELO BASADO EN SISTEMA MULTIAGENTE PARA LA GESTIÓN DE LAS COMUNICACIONES EN PROYECTOS INFORMÁTICOS DEL SECTOR SALUD HERRAMIENTAS DE INTELIGENCIA ARTIFICIAL PARA MINERÍA DE DATOS CASO PRÁCTICO: ESTIMACIÓN DE PREVALENCIA DE SÍNDROME METABÓLICO METODOLOGÍA PARA EL PROCESAMIENTO DE IMÁGENES DE TOMOGRAFÍA COMPUTARIZADA COMO APOYO AL DIAGNOSTICO DE PATOLOGÍAS MÉDICAS: CASO CÁNCER GÁSTRICO TIPO 2 DISEÑO DEL FUSELAJE PARA UN VEHÍCULO FÓRMULA SAE MEDIANTE LA SIMULACIÓN COMPUTACIONAL DE FLUJOS DE FLUIDOS . LA CÁTEDRA DE LA PAZ COMO HERRAMIENTA PARA EL USO RESPONSABLE DE LA VIRTUALIDAD EN EL CONTEXTO EDUCATIVO PARTIENDO DE LA INTELIGENCIA DE TIPO EMOCIONAL. ESTUDIO FISICOQUIMICO DEL ACEITE DE FRITURA RESIDUAL COMO MATERIA PRIMA PARA LA PRODUCCIÓN DE BIODIESEL TENDENCIAS INVESTIGATIVAS DE LOS DOCENTES EN FORMACIÓN INICIAL DE LA UFPS: UNA PERSPECTIVA TEMÁTICA Y METODOLÓGICA DESDE LA LICENCIATURA EN BIOLOGÍA Y QUÍMICA IDENTIFICACIÓN MOLECULAR MEDIANTE ITS DE LOS FITOPATÓGENOS Fusarium sp., Alternaria sp., Rhizopus sp., Aspergillus sp., Curvularia sp El CÁLCULO DESDE LA GEOMETRIZACIÓN DE INDICADORES URBANOS COMO ESTRATEGIA PARA CREACIÓN DE ARQUITECTURA Y URBANISMO TURISMO COMO FACTOR DE DESARROLLO EN LA CIUDAD DE CÚCUTA BOLEGANCHO: FABRICACIÓN DE DESTILADO ARTESANAL DESDE UNA PERSPECTIVA SOCIAL, RURAL Y AMBIENTAL BIORREMEDIACIÓN DE AGUAS RESIDUALES POR MEDIO DE UN CONSORCIO DE ALGAS NATIVAS DE LA REGIÓN DE OCAÑA NORTE DE SANTANDER. ESTUDIO DE EFECTOS NO GENÉTICOS QUE INFLUYEN SOBRE LA PRODUCCIÓN DE LECHE EN CABRAS EN OCAÑA (N.S) QUANTIFICATION OF UNCERTAINTY IN METALLIC PARTS SUBJECT TO FATIGUE PROPUESTA DE UN MODELO DE CONTINUIDAD DEL NEGOCIO PARA PYMES PRESTADORAS DEL SERVICIO DE INTERNET AL HOGAR: ESTUDIO DE CASO VALORACIÓN DE LA DIMENSIÓN TECNOLÓGICA EN LAS SOCIEDADES LIMITADAS Y ANÓNIMAS DE OCAÑA, COLOMBIA APLICACIÓN MÓVIL PARA LA OPTIMIZACIÓN DE LOS PROCESOS DE PRODUCCIÓN DE LECHE Y ALIMENTACIÓN DE LAS CABRAS: GRANJA EXPERIMENTAL DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER SECCIONAL OCAÑA DISEÑO DE UNA SEMBRADORA MECÁNICA DE SEMILLAS DE MAÍZ Y FRÍJOL.INTEGRACIÓN DE BIGDATA EN LAS PYMES: BUSINESS INTELLIGENCE AND CLOUD COMPUTING INFRAESTRUCTURA TECNOLÓGICA DE LAS PYMES DEL SECTOR COMERCIAL DE LA CIUDAD DE CÚCUTA: HACIA EL DISEÑO DE UN MODELO DE SEGURIDAD DE LA INFORMACIÓN. EL PAPEL DE GREEN IT EN LOS REQUERIMIENTOS NO FUNCIONALES DE DESARROLLO DE SOFTWARE: PERSPECTIVAS PARA EL DISEÑO FUNCIONAL ANÁLISIS DE LA SOSTENTABILIDAD DEL RECURSO HÍDRICO EN LA CUENCA ALTA DEL RÍO ALGODONAL, VEREDA EL OROQUE INFLUENCIA DE LA CULTURA ORGANIZACIONAL EN LA APLICACIÓN DEL GOBIERNO DE TI. CASO DE ESTUDIO UNIVERSIDAD FRANCISCO DE PAULA SANTANDER OCAÑA SOLUCIÓN POR MÉTODOS NUMÉRICOS DE LA ECUACIÓN DEL CALOR EN APLICACIONES DE LA INGENIERÍA. UN ESTUDIO DE CASO: REFRIGERACIÓN SIN USO DE ELECTRICIDAD RED SOCIAL FACEBOOK EN LAS ORGANIZACIONES CAMPESINAS DEL CATATUMBO VIOLENCIA INTRAFAMILIAR EN COLOMBIA: ANÁLISIS DE INFORMACIÓN A PARTIR DEL USO DE LA METODOLOGÍA CRISP-DM HERRAMIENTAS COMUNICATIVAS PARA EL CAMBIO SOCIAL DE LAS ASOCIACIONES DE VÍCTIMAS DEL CONFLICTO ARMADO DE LA PLAYA DE BELÉN, NORTE DE SANTANDER ANÁLISIS DE PARÁMETROS FÍSICOS EN EL SISTEMA SOLAR FOTOVOLTÁICO DEL BANCO DE ENERGÍA UBICADO EN LA PLAZOLETA A LA VIDA DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER OCAÑA MODELO ESTADISTICO PARA LA CREACION DE VALOR DE LAS PEQUEÑAS Y MEDIANAS EMPRESAS EN LA ZONA DE CONFLICTO SUSTENTABILIDAD EN LA GESTION DE PROYECTOS DE INGENIERIA EN COLOMBIA APROVECHAMIENTO DE LA CASCARILLA DE ARROZ (Oryza Sativa) PARA LA ELABORACION DE UN MATERIAL AGLOMERADO DESTINADO A LA CONSTRUCCION DE VIVIENDA EN CUCUTA. NORTE DE SANTANDER - COLOMBIA EL PROCESO DE GERMINACIÓN DEL MAÍZ; UNA OPORTUNIDAD DE MEJORA DEL CULTIVO METALES PESADOS EN PECES DE ALTO CONSUMO EN LA CIÉNAGA GRANDE DE SANTA MARTA (COLOMBIA) SIMULACIÓN DEL VERTIMIENTO DE LA PLANTA DE AGUA RESIDUAL DEL MUNICIPIO DE BARRANCABERMEJA SOBRE EL RIO MAGDALENA EFECTOS DE LA VARIABILIDAD CLIMÁTICA EN EL PESO DE LOS GRANOS DE CAFÉ EN EL DEPARTAMENTO NORTE DE SANTANDER, COLOMBIA CUANTIFICACIÓN DE BACTERIAS DIAZÓTROFAS Y SU RELACIÓN CON LA PRESENCIA DE Burkholderia glumae EN CULTIVOS DE ARROZ, NORTE DE SANTANDER, COLOMBIA INFLUENCIA DEL SULFATO DE ALUMINIO EN LA CONSERVACIÓN DEL BANANO 'CRIOLLO' (Musa, AAA, SUB-GRUPO GROS MICHEL) IMPLEMENTACÓN DE UN MODELO FÍSICO PARA DETERMINAR EL COMPORTAMIENTO HIDRÁULICO DE RÍOS DE MONTAÑA EVALUACIÓN DE LA DINÁMICA FORESTAL DE DOS ECOSISTEMAS ESTRATÉGICOS EN LA CUENCA DEL RÍO PAMPLONITA EVALUACIÓN DE CEPAS DE Azospirillum COMO PROMOTORAS DEL CRECIMIENTO VEGETAL EN Brachiaria decumbens OBTENCIÓN DE LÍPIDOS DE Scenedesmus obliquus CON POTENCIAL PARA BIODIESEL BAJO CONDICIONES DE CARBONO ADICIONAL Y NITRÓGENO REDUCIDO RED DE SENSORES INALÁMBRICA PARA PROCESAR DATOS EN CULTIVOS MASIVOS DE LOMBRICES NARIZ ELECTRÓNICA PARA LA IDENTIFICACIÓN DE CAFÉ (Coffea arábica) ADULTERADO CON HABA (Vicia faba) TOSTADA Y MOLIDA PREDICCIÓN DEL NIVEL DE CONTAMINACIÓN ELECTROMAGNÉTICA UTILIZANDO GOOGLE MAPS Y TECNICAS IDW BASADO EN MEDIDAS OBJETO VIRTUAL DE APRENDIZAJE PARA DISEÑAR AMPLIFICADORES MULTI-ETAPA CON TRANSISTORES BIPOLARES Y EFECTO DE CAMPO ANÁLISIS TÉRMICO COMPARATIVO DE PRODUCTOS CERÁMICOS EXTRUSIONADOS: EL LADRILLO MULTIPERFORADO VS. LADRILLOS MODIFICADOS POR MEDIO DE GEOMETRÍAS DISIPADORAS EXPERIMENTACIÓN COMPARATIVA DE TRANSFERENCIA DE CALOR POR PUENTE TÉRMICO A PARTIR DE LA MODIFICACIÓN DE LA GEOMETRÍA EN BLOQUE CERÁMICO H10. MODELO MATEMÁTICO PARA LA SECUENCIACIÓN DE LA PRODUCCIÓN EN UNA EMPRESA MANUFACTURERA DISEÑO DE LA ARQUITECTURA DE INFORMACIÓN (AI) DE LA PLATAFORMA TECNOLÓGICA PARA GESTIÓN DE LA PRODUCCIÓN INVESTIGATIVA DE LOS DOCENTES E INVESTIGADORES DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER SINPLAFUT – UNA APLICACIÓN BASADA EN MICROSERVICIOS PARA EL ENTRENAMIENTO DEL FÚTBOL. LAS TIC EN LA ADMINISTRACIÓN DE LOS PROCESOS Y SISTEMATIZACIÓN DEL BANCO DE CEPAS DE LABORATORIO DE INVESTIGACIONES EN MICROBIOLOGÍA AVANZADA DE LA UFPS "INSTANCIA" DATOS QUE DAN FORMA [ARTE GENERATIVO] LA INNOVACIÓN DISRUPTIVA COMO VENTAJA COMPETITIVA EN LAS EMPRESAS DEL SECTOR CALZADO EN LA CIUDAD DE CUCUTA EVALUACIÓN DE LA INFLUENCIA DE LA MOLIENDA HÚMEDA EN EL DESEMPEÑO ESTRUCTURAL Y MECÁNICO DE PRODUCTOS CERÁMICOS CONFORMADOS POR EXTRUSIÓN INFLUENCIA DE LA ADICIÓN DE FIBRA COCO EN LA FORMULACIÓN DE PASTAS CERÁMICAS Y SU EFECTO EN EL COMPORTAMIENTO FÍSICO-MECÁNICO Y ESTRUCTURAL DISEÑO Y CONSTRUCCIÓN DE UNA INCUBADORA DE AVES DE BAJO CONSUMO ENERGÉTICO DISEÑO E IMPLEMENTACIÓN DE UN CONVERTIDOR DC/DC HÍBRIDO REALIMENTADO SIMULACIÓN DE UN SISTEMA DE CONTROL PID DE TEMPERATURA DE UN DINAMÓMETRO HIDRÁULICO IMPLEMENTADO EN EL SOFTWARE MATLAB-SIMULINK ® MÉTODO COMPUTACIONAL PARA LA VALORACIÓN AUTOMÁTICA DEL VOLUMEN VENTRICULAR IZQUIERDO EN ANGIOGRAFÍA POR RAYOS X. RESISTENCIA AL DESGASTE A ALTA TEMPERATURA DE RECUBRIMIENTOS DE CIRCONA-ALUMINA-CERIA OBTENIDOS POR PROYECCIÓN TÉRMICA POR LLAMA APLICACIÓN DEL BUSINESS MODEL CANVAS EN LA ELABORACIÓN DE MUEBLES DE OFICINA A PARTIR DE LA CASCARILLA DE ARROZ, IMPULSANDO LOS NEGOCIOS VERDES EN LA CIUDAD DE CÚCUTA, NORTE DE SANTANDER. PROPIEDADES TÉRMICAS Y TRIBOLÓGICAS DE RECUBRIMIENTOS DE CIRCONA-ALÚMINA OBTENIDOS POR PROYECCIÓN TÉRMICA POR LLAMA. MEJORAMIENTO EMPRESARIAL DE MIPYMES A TRAVÉS DEL USO DE UNA APLICACIÓN WEB COMO PRIMER PASO HACIA LA REVOLUCIÓN INDUSTRIAL 4.0 "SISTEMA FOTOVOLTAICO AUTONOMO PARA UN PROYECTO PRODUCTIVO DE DURAZNO EN ZONA NO INTERCONECTADA: CASO DE ESTUDIO" CLUSTER CV2: APLICACIÓN DE VISIÓN COMPUTACIONAL PARA IDENTIFICACIÓN ESPACIAL DE AGRUPAMIENTO DE DATOS REDUCCIÓN DE LA BRECHA DIGITAL A PARTIR DE LAS REDES INALÁMBRICAS EN LOS COLEGIOS PÚBLICOS DE CÚCUTA EVALUACIÓN DE LA PRODUCCIÓN DE BIOETANOL A PARTIR DE LA CASCARILLA DE ARROZ (Oryza sativa) PRETRATADA CON NaOH E HIDROLIZADA CON CELULASA ÁCIDA (CFB3S) CONVERTIDOR AC/DC SEMICONTROLADO COMO CARGADOR DE BATERÍAS PARA VEHÍCULOS. CONTROL EN LAZO CERRADO EN UN SISTEMA INALÁMBRICO DE POSICIONAMIENTO EN DECIMAS DE MILÍMETROS PARA UN MOTOR PASO A PASO. DESARROLLO DE PROJECT MANAGEMENT GAME VR (PMG-VR) COMO APOYO AL APRENDIZAJE DE LA GUÍA PMBOK PARA GERENTES DE PROYECTO RESISTENCIA A LA CORROSION DE RECUBRIMIENTOS DE Si/Zr/Ti SOBRE SUSTRATOS DE ALUMINIO AA2024-3 SINTERIZADOS VIA SOL-GE IMPLEMENTACIÓN DE UNA APLICACIÓN MÓVIL PARA LA REALIZACION DE LABORATORIOS EN EL AREA DE PROTECCIÓN DE SISTEMAS INFORMÁTICOS APLICANDO HERRAMIENTAS DE SEGURIDAD DIGITAL AERODYNAMICS DESIGN OF SMALL HORIZONTAL AXIS WIND TURBINE PROPIEDADES FÍSICAS Y MECÁNICAS DE BLOQUES H10 FABRICADOS EN EL HORNO HOFFMAN DE LA LADRILLERA OCAÑA APLICACIÓN DE LA CONEXIÓN REMOTA ENTRE PLC UNITRONICS Y SMARTPHONE EN LA EVOLUCIÓN TECNOLÓGICA DE LA AUTOMATIZACIÓN DE LOS PROCESOS DE LA INDUSTRIA LADRILLERA DE NORTE DE SANTANDER. REVISIÓN BIBLIOGRÁFICA: UNA MIRADA A LOS SISTEMAS DE DETECCIÓN Y DIAGNÓSTICO DE FALLOS EN EQUIPOS ESTACIONARIOS CRÍTICOS, CASO ESTUDIO: INTERCAMBIADORES DE CALOR SISTEMA DE MONITORIZACIÓN Y CONTROL DEL PROCESO DE LLENADO DE TANQUES DE DISTRIBUCIÓN DE AGUA POTABLE METODOLOGÍA PARA CONTROLAR UNA VÁLVULA DE COMBUSTIBLE DE UN MOTOR DE COMBUSTIÓN INTERNA UTILIZANDO UN MOTOR PASO A PASO IMPLEMENTACIÓN DE UN SISTEMA DE CONTROL PID PARA LA VELOCIDAD DE UN DINAMÓMETRO HIDRÁULICO UTILIZADO EN LA CARACTERIZACIÓN DE MOTORES DE COMBUSTIÓN INTERNA ALGORITMO PARA DETECCIÓN DE FALLAS Y SUAVIZADO DE DATOS DE UNA RED INALÁMBRICA DE SENSORES PARA MONITORIZACIÓN DE VARIABLES AMBIENTALES ANÁLISIS FRACTAL EN IMPRESIÓN DIAGNÓSTICA EN CASOS DE TRASTORNO NEURODEGENERATIVO TIPO ALZHEIMER ANÁLISIS FRACTAL DE LA INFLUENCIA DE LA DISTRIBUCIÓN DE REDES VIALES EN LAS VARIABLES DE TRÁNSITO EFECTO DEL ÁNGULO DE FUERZAS EXTERNAS EN LA DISTRIBUCIÓN DE TENSIONES DE LOS IMPLANTES DENTALES OSTEOINTEGRADOS APORTES DE LA INGENIERÍA MOLECULAR EN LAS VACUNAS TERAPÉUTICAS DEL VIRUS DEL PAPILOMA HUMANO EN MÉXICO FACTORES QUE INCIDEN EN LAS ESTRATEGIAS DE ARTICULACIÓN ENTRE EL PROGRAMA ADMINISTRACIÓN DE EMPRESAS Y EL SECTOR EMPRESARIAL DE CÚCUTA HABILIDADES MATEMATICAS PARA EL PROCESO DE FORMACIÓN EN LAS CIENCIAS CONTABLES DE LA UFPS-CUCUTA RESOLUCIÓN DE PROBLEMAS A TRAVÉS DE LAS TIC Y EL ENFOQUE METODOLÓGICO CPA EVALUACION DEL EFECTO INHIBIDOR DE LA ENZIMA POLIFENOL OXIDASA EN UNA SALSA DE AGUACATE (Persea americana) de la VARIEDAD HASS CONSTRUCCIÓN DEL CONCEPTO DE DERIVADA USANDO LA TI-VOYAGE 92 LA INGENIERÍA DIDÁCTICA COMO METODOLOGÍA DE INVESTIGACIÓN EN EL APRENDIZAJE DEL CÁLCULO DIFERENCIAS INCIDENCIA DEL PENSAMIENTO COMPLEJO EN LA TRANSVERSALIDAD DE LA GESTIÓN DEL CONOCIMIENTO EN LAS CIENCIAS ADMINISTRATIVAS Y ECONÓMICAS EFECTOS DE LA INGENIERÍA DIDÁCTICA EN EL APRENDIZAJE DEL CONCEPTO DE FUNCIÓN ESTUDIO DE LA MOJABILIDAD DE UNA SUPERFICIE HIDROFÓBICA INTELIGENTE ACTIVADA POR CAMBIOS EN EL pH DISEÑA DIGITAL UN ESCENARIO DE CREACIÓN DE CONTENIDOS PARA CANAL CAPITAL BIO-CONVERSIÓN DE AGUAS POST-CONSUMO PISCICOLA PARA LA PRODUCCIÓN DE BIOMASA ALGAL DE ALTO VALOR AGREGADO HERRAMIENTAS DE FABRICACIÓN DIGITAL COMO ESTRATEGIA DE INNOVACIÓN EDUCATIVA TIC EN LOS PROCESOS DE DISEÑO ARQUITECTÓNICO AULA INVERTIDA MEDIADA POR EL USO DE UN PORTAL DE APOYO A LA DOCENCIA EN UN CURSO DE MATEMÁTICAS ANÁLISIS DE COMPONENTES PRINCIPALES SOBRE INTELIGENCIAS MÚLTIPLES Y RENDIMIENTO ACADÉMICO EN ESTUDIANTES DE ESTRATOS BAJOS DE CÚCUTA LA GESTIÓN DE LAS COMUNICACIONES EN EL ÉXITO DE LOS PROYECTOS. CASO ESTUDIO: UNIVERSIDAD DE PROVINCIA PERCEPCIÓN DE LOS ESTUDIANTES DE UN PROGRAMA DE INGENIERÍA SOBRE LA MOVILIDAD ESTUDIANTIL Y SU IMPACTO EN LA FORMACIÓN INTEGRAL COMUNICACIÓN Y MEDIO AMBIENTE: LA TRADICIÓN ORAL COMO HERRAMIENTA PARA LA CONSTRUCCIÓN DE MEMORIA HISTÓRICA EN LA CUENCA DEL RÍO PAMPLONITA NECESIDADES TECNOLÓGICAS DE LA COMUNIDAD INVIDENTE DE LA UNIVERSIDAD DE PAMPLONA, SEDE VILLA DEL ROSARIO ANÁLISIS DE ÁCIDO FÓLICO EN ARROZ BLANCO POR CROMATOGRAFIA LIQUIDA ULTRA RAPIDA (UFLC)SITUACIÓN MIGRATORIA DE LA POBLACIÓN ASENTADA EN LAS COMUNAS 3, 4, 6 Y 7 DEL MUNICIPIO DE CÚCUTA DESDE EL ENFOQUE EN DERECHOS HUMANOS CONTEXTUALIZACIÒN EDUCATIVA EN LA FRONTERA: MEMORIAS, NARRATIVAS ORALES Y SUBJETIVIDADES DE LA POBLACIÒN MEDIACIÓN EN LAS PRÁCTICAS PEDAGÓGICAS A TRAVÉS DE LAS TIC ATENEO: ESTRATEGIA PARA DISMINUIR LA DESERCIÓN Y REPITENCIA DE ESTUDIANTES DE CICLO BÁSICO UNIVERSITARIO ESTABLECIMIENTO IN VITRO DE YEMAS AXILARES DE CEBOLLA DE BULBO (Allium cepa L.) MAQUINAS TURBOCOMPRESOR DE GAS NATURAL – MODELADO DE VIBRACIONES COMPORTAMIENTO DEL CONSUMIDOR DE PRODUCTOS EN LA OFERTA DE TRIBUS INDIGENAS CONCEPCIONES DE EDUCACIÓN A DISTANCIA Y MATEMATICA FINANCIERA DESDE UNA COMPRENSIÓN ONTO-HISTÓRICA EFECTO DE UNA DIETA A BASE DE PROTEÍNA NO CONVENCIONAL EN LA ETAPA DE ALEVINAJE DE CACHAMA BLANCA (Piaractus brachypomus) MODELACIÓN MATEMÁTICA CON APLICATIVOS WEB HACIA LA COMPRENSIÓN DEL CONCEPTO DE DERIVADA LA VIVIENDA DIGNA Y BARRERAS DE ACCESO A LA JUSTICIA: ESTUDIO DE CASO ANÁLISIS DE LAS REPRESENTACIONES SOCIALES DEL MEDIO AMBIENTE COMO SUJETO DE DERECHOS A PARTIR DE LA SENTENCIA T - 622 DE 2016 EN FUNCIONARIOS PÚBLICOS DE CORPONOR EN LA CIUDAD DE CÚCUTA THE IMPACT OF A CLASS PROJECT BASED ON INTERACTION WITH A NATIVE SPEAKER TO IMPROVE THE STUDENTS' LINGUISTIC AND CULTURAL COMPETENCE IN A FOREIGN LANGUAGE COURSE URBANOSCOPIO: PERCEPCIÓN DEL ESPACIO URBANO A TRAVÉS DE LA CATEGORIZACIÓN DE LA MALLA CURRICULAR DEL PROGRAMA DE ARQUITECTURA DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER PROCESO DE APRENDIZAJE DE LA MATEMÁTICA DESDE LA PERSPECTIVA DE LA NEUROEDUCACIÓN EN LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER HABILIDADES PARA LA VIDA EN JÓVENES UNIVERSITARIOS REFORMA RURAL INTEGRAL, UNA MIRADA AL MUNICIPIO DE FORTUL, ARAUCA 301 EL EMPRENDIMIENTO COMO VALOR AGREGADO DEL PROGRAMA DE ADMINISTRACIÓN DE EMPRESAS DE LA UFPS OCAÑA DISEÑO UN MODELO DE DIRECCIÓN ESTRATEGICA PARA EL INSTITUTO DE FORMACIÓN TEOLÓGICA HEBBRÓN – INFORTHEB FACTORES QUE AFECTAN LA PERDURABILIDAD EN LA EMPRESA LEÓN DISTRIBUCIONES DE LA CIUDAD OCAÑA, NORTE DE SANTANDER ANÁLISIS DE LA GENERACIÓN DE RENTAS PROPIAS POR EL MUNICIPIO DE OCAÑA EN EL PERIODO 2009-2017 COMPROMISO SOCIAL EN TORNO AL PROCESO DE COBRANZA DE LAS MULTAS DE TRÁNSITO DE LA CIUDAD DE OCAÑA A LOS INFRACTORES PROVENIENTES DE LA REGIÓN DEL CATATUMBO BUENAS PRÁCTICAS DE GOBERNANZA DE TI PARA LAS CAJAS DE COMPENSACIÓN FAMILIAR DEL NORORIENTE COLOMBIANO AFILIADAS A FEDECAJAS CAPACIDAD DE INNOVACIÓN DE LAS EMPRESAS APÍCOLAS COLOMBIANAS MEJORAMIENTO Y/O REDISEÑO DE PROCESOS ADMINISTRATIVOS PARA OPTIMIZAR EL ÁREA DE RRHH DE LA EMPRESA COOPERATIVA DE CAFICULTORES DEL CATATUMBO LTDA INFLUENCIA DE LAS TIC EN EL DESEMPEÑO DE LOS ESTUDIANTES DE ADMINISTRACIÓN EN LAS PRUEBAS DE SABER PRO 2017 PROTOTIPO DE SOFTWARE FUNCIONAL QUE PERMITA AUDITAR EN EL ÁREA DE RECURSOS HUMANOS DE LAS ENTIDADES DEL SECTOR SALUD EN LA SELECCIÓN DEL PERSONAL COMPARATIVO DE LA VOLATILIDAD TRIMESTRAL DEL ÍNDICE COLCAP EN EL PERIODO 2012-2017 METODOLOGÍA PARA LA EVALUACIÓN INTERNA DE UNA CADENA DE VALOR PREDICCIÓN MEDIANTE INTELIGENCIA ARTIFICIAL DE LA RECOMENDACIÓN DE HOTELES EN MONTEVIDEO EVOLUCION Y CAMBIOS EN EL TRATO DE LOS TRABAJADORES DENTRO DE LAS ORGANIZACIONES LA PRODUCTIVIDAD DEL VALOR AGREGADO (MPVA) Y LOS ESTILOS DE LIDERAZGO EN EL SECTOR MINERO DEL DEPARTAMENTO NORTE DE SANTANDER COLOMBIA LAS COMPETENCIAS LABORALES QUE REQUIERE EL SECTOR PRODUCTIVO: "DILEMA ENTRE LA TEORÍA Y LA PRÁCTICA COMPROMISO DE LOS CONTRIBUYENTES DEL MUNICIPIO DEL CARMEN CON EL IMPUESTO PREDIAL RESPONSABILIDAD SOCIAL EMPRESARIAL CON ENFOQUE MEDIOAMBIENTAL DE LAS EMPRESAS CARBONÍFERAS DE LA CIUDAD DE CÚCUTA IMPACTO DEL CONSUMO EN LOS COMERCIOS DE LA CIUDAD DE CÚCUTA. BAJO UN ESTUDIO DE CASOS DE LA MIGRACIÓN DE VENEZOLANOS EL TURISMO COMO CONTRIBUCIÓN AL CRECIMIENTO DEL PIB, PARA EL DESARROLLO DE LA ECONOMÍA DEL PAÍS LAS TIC COMO FACTOR DETERMINANTE DE INNOVACIÓN EN EL SECTOR TURÍSTICO EFECTOS SOCIO-ECONOMICOS DE LA CRISIS DE VENEZUELA EN CUCUTA Y SU SECTOR MANUFACTURERO CASO: CONFECCIONES Y CALZADO TASA MÍNIMA DE RENDIMIENTO REQUERIDA (TMRR) "MITO O REALIDAD" APLICACIÓN DE LA INDUSTRIA 4.0 EN LOS NEGOCIOS INTERNACIONALES CARACTERIZACIÓN DE ACTITUDES Y HABILIDADES EMPRENDEDORAS Y CAPACIDADES DE EMPRESARIALIDAD ENMARCADAS EN LA POLÍTICA DE CULTURA DEL EMPRENDIMIENTO DE LOS ESTUDIANTES Y DOCENTES EN LAS INSTITUCIONES EDUCATIVAS (IE) DEL MUNICIPIO DE SARDINATA, NORTE DE SANTANDER HEURÍSTICOS Y SESGOS COGNITIVOS EN LAS DECISIONES GERENCIALES: QUÉ SON Y CÓMO SE PUEDEN EVITAR ANÁLISIS DE SOSTENIBILIDAD DE SISTEMAS DE PRODUCCIÓN OVINO-CAPRINO ESTUDIO DE FACTIBILIDAD PARA LA EXPORTACIÓN DEL AGUACATE (persea americana) EN LA PRODUCCIÓN DEL MUNICIPIO BOCHALEMA, NORTE DE SANTANDER PRÁCTICAS DE RESPONSABILIDAD SOCIAL DE LAS EMPRESAS DE INGENIERÍA ELÉCTRICA EN NORTE DE SANTANDER TURISMO GASTRONÓMICO, UNA OPORTUNIDAD PARA EL DESARROLLO ECONÓMICO LOCAL DILEMAS BIOÉTICOS DEL PERSONAL DE SALUD Y VIVENCIAS DE PACIENTES EN LISTA DE ESPERA FRENTE A LA PRESUNCION LEGAL DE DONACIÓN RELACIÓN ENTRE EL NIVEL DE SOBRECARGA DEL CUIDADOR PRINCIPAL Y LA AGENCIA DE AUTOCUIDADO DEL PACIENTE DE CIRUGÍA CARDIACA EN UNA INSTITUCIÓN DE ALTA COMPLEJIDAD EN CÚCUTA FORMACIÓN PROFESIONAL PERTINENTE Y DE CALIDAD EN UN PROGRAMA DE SALUD: LOGROS Y BRECHAS INDICADORES BIOQUIMICOS INCIDENTES DURANTE EL ESFUERZO FISICO EN PATINADORES DE CARRERAS DEL DEPARTAMENTO DE NORTE DE SANTANDER DIAGNÓSTICO DE LAS CONDICIONES Y MEDIO AMBIENTE DE TRABAJO DEL LABORATORIO DE CERÁMICOS DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER, SEDE CÚCUTA IDENTIFICACIÓN DE LOS ESTILOS DE VIDA Y EL RIESGO CARDIOVASCULAR EN LOS COLABORADORES DE LA SEDE ADMINISTRATIVA COOMEVA EPS OFICINA CÚCUTA CONCORDANCIA ENTRE LA RELACIÓN GENÉTICA Y PROTEÓMICA DE AISLADOS CLÍNICOS Y AMBIENTALES DE Cryptococcus neoformans var. grubii EN CÚCUTA, COLOMBIA ACTIVIDAD FÍSICA E INTELIGENCIA EMOCIONAL: UN ESTUDIO COMPARATIVO EN ESTUDIANTES UNIVERSITARIOS DESAFIOS EN LA ADHERENCIA TERAPÉUTICA AL TRATAMIENTO ANTITUBERCULOSIS Y PLANES HACIA LA ELIMINACION DE LA ENFERMEDAD EN LA CIUDAD DE SAN JOSÉ DE CÚCUTA DETERMINANTES SOCIALES DE LA SALUD EN POBLACIÓN INMIGRANTE VENEZOLANA EN EL TERRITORIO DE CÚCUTA, NORTE DE SANTANDER, 2017-2018 CALIDAD DE VIDA EN POBLACIÓN INMIGRANTE VENEZOLANA EN EL TERRITORIO DE CÚCUTA, NORTE DE SANTANDER, 2017-2018 IMPACTO DE LA ESTRATEGIA CUIDANDO JUNTOS EN CUIDADORES DE PERSONAS CON DISCAPACIDAD RENOVACIÓN CONCEPTUAL DEL PRINCIPIO DE OPORTUNIDAD EN EL SISTEMA PENAL ACUSATORIO IMAGINARIOS SOCIALES DE PAZ E IMPLEMENTACIÓN NORMATIVA DE LA CÁTEDRA PARA LA PAZ A TRAVÉS DE LA PAZ APP EN INSTITUCIONES EDUCATIVAS PÚBLICAS EN CÚCUTA LINEAMIENTOS PEDAGÓGICOS PARA LA FORMACIÓN EN GESTIÓN AMBIENTAL DEL CONTADOR PÚBLICO, DESDE LA ACCIÓN DOCENTE" "APROXIMACIÓN TEÓRICA SOBRE LA CORRESPONDENCIA ENTRE LA FORMACIÓN DOCENTE Y LAS POLÍTICAS NACIONALES DE CALIDAD EDUCATIVA COMO BASES PARA UNA PEDAGOGÍA INFANTIL" UNIVERSIDAD FRANCISCO DE PAULA SANTANDER CUCUTA "APORTES TEÓRICOS CONCEPTUALES A LAS COMPETENCIAS PEDAGÓGICAS DE LOS FORMADORES OCUPACIONALES EN EL MARCO DE LA EDUCACIÓN NO FORMAL" MIGRACIÓN FRONTERIZA, MOVILIDAD SOCIAL, E IMPACTO EN LOS ASENTAMIENTOS HUMANOS. "Caso Talento, Municipio de San José de Cúcuta." INCLUSIÓN EDUCATIVA EN CONTEXTOS DE VIOLENCIA: ESTUDIO DE CASO, TIBÚ- COLOMBIA. GEOMETRIZACIÓN DE INDICADORES URBANOS COMO ESTRATEGIA PARA PRODUCCIÓN DE PROYECTOS DE ARQUITECTURA Y URBANISMO LA ARCILLA Y LA ARQUITECTURA REPRESENTATIVA DEL SECTOR CENTRO COMO ELEMENTOS PROPIOS DE LA IDENTIDAD DE SAN JOSÉ DE CÚCUTA. MEMORIA HISTÓRICA GRÁFICA DE LAS HUELLAS DEL CONFLICTO ARMADO EN NORTE DE SANTANDER. CAMINANDO POR LAS HUELLAS DEL DISEÑO GRÁFICO EN COLOMBIA. INCLUSIÓN SOCIO LABORAL DE PERSONAS CON DISCAPACIDAD INTELECTUAL, EN LAS EMPRESAS PRIVADAS DE CÚCUTA. DESDE LA PEDAGOGIA CRÍTICA LA FORMACIÓN EN CIUDADANIA: ESTUDIO DE CASO ESTUDIANTES DE LOS PROGRAMAS PERTENECIENTES A LA FACULTAD DE EDUCACIÓN ARTES Y HUMANIDADES DE LA U.F.P.S PRAXIS PEDAGÓGICA: UNA APROXIMACION TEORICA EN EL CONTEXTO DEL SUBSISTEMA DE EDUCACION BASICA, NIVEL PRIMARIA MUNICIPIO LA CEIBA ESTADO TRUJILLO, REPÚBLICA BOLIVARIANA DE VENEZUELA IMAGINARIOS DE CONFLICTO SOCIAL EN UN ASENTAMIENTO HUMANO DE LA ZONA METROPOLITANA DE CÚCUTA REPRESENTACIÓN MEDIÁTICA DE LOS MIGRANTES EN LA FRONTERA COLOMBO VENEZOLANA: ANÁLISIS DE LAS FRANJAS INFORMATIVAS DEL CANAL UNO Y CANAL TRO LA SUPERVISION EDUCATIVA DEL SUBSISTEMA DE EDUCACION BASICA VENEZOLANA MODELACIÓN MATEMÁTICA CON APLICATIVOS WEB HACIA LA COMPRENSIÓN DEL CONCEPTO DE DERIVADA EL RECONOCIMIENTO COMO POSIBILIDAD PEDAGÓGICA DESDE LA TEORÍA DE LAS REPRESENTACIONES SOCIALES DE GUERRA Y PAZ DE JÓVENES UNIVERSITARIOS CARACTERIZACIÓN DE LOS RESULTADOS DE LA PRUEBA SABER PRO 2017 EN LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER ESTRATEGIA DIDÁCTICA PARA FORTALECER LAS PRÁCTICAS EN LECTURA Y ESCRITURA DE LA UNVERSIDAD FRANCISCO DE PAULA SANTANDER: GUÍA ORIENTADORA ULISES ESTILO DE ENSEÑANZA Y APRENDIZAJE DEL PROGRAMA INGENIERÍA ELECTRÓNICA DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER RESPONSABILIDAD SOCIAL UNIVERSITARIA UN NUEVO ENFOQUE PARA EL DESARROLLO DE LA EDUCACION SUPERIOR EN COLOMBIA. ESTRATEGIA PARA INCENTIVAR EL APRENDIZAJE AUTÓNOMO: CASO CONCURSO NACIONAL DE INTEGRALES ALFABETIZACIÓN ESCOLAR Y LITERACIDAD: UNA LECTURA DESDE LA INVESTIGACIÓN ACCIÓN PEDAGÓGICA EDUCACION DE CALIDAD EN EL CATAUMBO: CARACTERIZACIÓN DEL DOCENTE DE CALIDAD CIUDADANÍA Y DESARROLLO HUMANO: UN ABORDAJE DESDE LA CARTOGRAFÍA SOCIAL DIAGNÓSTICO SOBRE LA PERCEPCIÓN Y EL USO DEL ESPACIO PÚBLICO DE LA CIUDAD DE CÚCUTA POR PARTE DEL COLECTIVO FEMENINO. CASO CALLE TRECE ENTRE AVENIDAS CERO Y QUINTA LAS DINÁMICAS URBANAS Y SU INCIDENCIA EN LA TRANSFORMACIÓN DEL TERRITORIO. LA BRECHA ENTRE LAS COMPETENCIAS DE LOS EGRESADOS DEL PROGRAMA DE INGENIERÍA DE SISTEMAS DE LAS UNIVERSIDADES OFICIALES DE NORTE DE SANTANDER Y EL EJERCICIO PROFESIONAL EN MATERIA DE GOBIERNO DE TI. FORMAS DE LA INFORMACION / LA CIENCIA COMO FUNDAMENTO PROYECTUAL INTELIGENCIA EMOCIONAL EN LA FORMACIÓN INICIAL DE DOCENTES CARTOGRAFÍA DE LAS PRACTICAS DE CRIANZA DE LAS SUBJETIVIDADES INFANTILES EMERGENTES EN LA CIUDAD DE CÚCUTA. ATENCIÓN PSICOEDUCATIVA A NIÑOS Y NIÑAS HOSPITALIZADOS POR ENFERMEDAD GENERAL DEL SERVICIO DE PEDIATRIA E.S.E H.U.E.M DESEMPEÑO CIENTIFICO DEL DOCENTE DE LA UNIVERSIDAD PÚBLICA COLOMBIANA ANÁLISIS DE LA SITUACIÓN SOCIAL FRENTE AL DESARROLLO DE INCENDIOS FORESTALES EN LA COMUNIDAD PERTENECIENTE A LAS VEREDAS SAN MIGUEL Y TEJA DE ÁBREGO, NORTE DE SANTANDER ANÁLISIS DE LOS ESTILOS DE DIRECCIÓN DE LAS MUJERES QUE DESEMPEÑAN CARGOS DE ALTA DIRECCIÓN EN LAS ENTIDADES DE ECONOMÍA SOLIDARIA EN LA CIUDAD DE OCAÑA, NORTE DE SANTANDER FACTORES DE ÉXITO DE EMPRENDIMIENTOS BENEFICIARIOS DE CAPITAL SEMILLA FONDO EMPRENDER EN COLOMBIA LA DIFICIL TAREA DE SER MADRE EN ESTUDIANTES UNIVERSITARIAS LA DISCAPACIDAD POR EL CONFLICTO ARMADO: UN CAMBIO DE VIDA PARA EL CUIDADOR PRINCIPAL CALIDAD DE VIDA Y FUNCIONALIDAD FAMILIAR EN PERSONAS CON HIPERTENSION ARTERIAL Y DIABETES MELLITUS DE CUCUTA PERCEPCIÓN DE LOS USUARIOS DEL COMPORTAMIENTO DE CUIDADO HUMANIZADO DEL PROFESIONAL DE ENFERMERÍA EN LAS UNIDADES DE CUIDADO INTENSIVO DE UNA ENTIDAD OFICIAL Y UNA ENTIDAD PRIVADA EN EL I SEMESTRE DE 2017 INFLUENCIA DE LOS METODOS CONTRASTE Y PLIOMETRICO SOBRE LA FUERZA EXPLOSIVA EN ETAPA PRECOMPETITIVA EN FUTBOLISTAS JUVENILES PERFIL SOCIODEMOGRÁFICO DEL ESTUDIANTE DE ENFERMERÍA ASOCIADO A SU CONOCIMIENTO Y ACTITUD FRENTE A LA DONACIÓN Y TRASPLANTE DE ÓRGANOS Y TEJIDOS. CONDICIÓN FÍSICA Y ACTIVIDAD FÍSICA DIRIGIDA MUSICALIZADA EN ESTUDIANTES DE LA UNIVERSIDAD DE PAMPLONA FACTORES MULTIDIMENSIONALES QUE INFLUYEN EN EL ESTADO DE SALUD DEL ADULTO MAYOR RETOS PARA EL FOMENTO DE LA EDUCACIÓN SEXUAL Y CONSTRUCCIÓN DE CIUDADANÍA EN EL MUNICIPIO DE SARDINATA BARRERAS DE ACCESO A LA JUSTICIA EN LA PRESTACION DE LOS SERVICIOS PUBLICOS DOMICILIARIOS - BARRIO LOS MANGOS – CÚCUTA – NORTE DE SANTANDER CÚCUTA ENTRE LA LEGALIDAD DEL LÍMITE Y LA ILEGALIDAD DE LA FRONTERA. EFECTO DEL PRETRATAMIENTO CON ULTRASONIDO EN LAS CINÉTICAS DE SECADO CONVECTIVO DEL BANANO (Musa paradisiaca sp). TORTUOSIDAD Y PERMEABILIDAD DE MATERIALES CERÁMICOS MESOPOROSOS DE CAOLÍN Y DIATOMITA EFECTO DE LA CONCENTRACIÓN DE ALMIDÓN EN LAS PROPIEDADES, MORFOLÓGICAS Y ESTRUCTURALES DE CERÁMICAS POROSAS A BASE DE ARCILLAS EXPANSIVAS. SIMULACIÓN Y CONSTRUCCIÓN DE LA SILLA DE RUEDAS CONVENCIONAL EN MATERIAL ECOLÓGICO DISEÑO DE SISTEMA AUTOMÁTICO DE CONTROL DE VELOCIDAD DE MOTOR BLDC APLICADO A MICROCENTRÍFUGA. SISTEMA DE INFORMACIÓN PARA AUTOEVALUACIÓN – SIAU EXTRACCIÓN DE CARACTERÍSTICAS DISCRIMINANTES EN IMÁGENES BIOMÉDICAS. ANÁLISIS DEL POTENCIAL TÉCNICO PARA LA PRODUCCIÓN DE ENERGÍA RENOVABLE A PARTIR DEL CUESCO DE PALMA EN NORTE DE SANTANDER CODIFICACIÓN MORFOLOGICA E HISTÓRICA DE LA ARQUITECTURA RELIGIOSA EN LA CIUDAD DE SAN JOSÉ DE CÚCUTA: CASO CATEDRAL DE SAN JOSÉ COMPETENCIAS RELEVANTES DE UN DIRECTOR DE GRUPO DE INVESTIGACIÓN EN LA UFPS, PARA SER EFICAZ EN SU ENTORNO, BUSCANDO ARTICULAR LA INVESTIGACIÓN CON EL DESARROLLO LOCAL, REGIONAL Y NACIONAL LA DEMOSTRACIÓN POR REDUCCIÓN AL ABSURDO UNA VÍA AL DESARROLLO DEL PENSAMIENTO MATEMÁTICO AVANZADO LA EFECTIVIDAD MATERIAL DE LA CONSULTA POPULAR EN LA ACTIVIDAD MINERA PARA LA PROTECCION DE LOS RECURSOS NARUTALES EN COLOMBIA EVALUACIÓN DE UN CONCETRADO PARA GANADO BOVINO A PARTIR DE QUERATINA EXTRAÍDA DEL SUBPRODUCTO (PLUMAS DE POLLO) COMPLEMENTADO CON PROTEÍNA DE SOYA (Glycine max) Y MAÍZ (Zea mayz). EVALUACIÓN DEL TEST DE TETRAZOLIO COMO MÉTODO PARA DETERMINAR LA VIABILIDAD DE SEMILLAS DE Glycine max. INDUCCIÓN DE POLIPLOIDIA EN KALANCHOE DAIGREMONTIANA RAYM.-HAMET & H.PERRIER (CRASSULACEAE) TOXICIDAD DE LAS AGUAS RESIDUALES PISCÍCOLAS SOBRE EL CULTIVO DE Scenedesmus sp. CAPACITAR EN EDUCACIÓN ADMINISTRATIVA Y FINANCIERA PRODUCTORES DE OVINOS Y CAPRINOS DE ASOVICAN (ASOCIACIÓN DE OVINOS Y CAPRINOS DEL NORTE DE SANTANDER) FITODEPURACIÓN DE AGUAS RESIDUALES CON UNA PLANTA EPÍFITA DE BOSQUE SECO TROPICAL (Tillandsia flexuosa ) VIABILIDAD DE INVERSIÓN EN EL MERCADO DE VALORES DE LAS EMPRESAS Y PERSONAS NATURALES RADICADOS EN ZONA DE FRONTERA NORORIENTAL, CON EL FIN DE OBTENER MEJORES BENEFICIOS ECONÓMICOS QUE CONTRIBUYAN AL DESARROLLO REGIONAL PERFIL COMPETITIVO DE LA INDUSTRIA DEL BLUE JEANS EN LA ECONOMÍA DE CÚCUTA SECTOR AGRÍCOLA EN NORTE DE SANTANDER Y EL MERCADO ASIÁTICO CARACTERIZACIÓN DEL SECTOR MIPYMES FORMAL E INFORMAL DE LA CIUDAD DE SAN JOSÉ CÚCUTA ANALISIS DEL COMPORTAMIENTO DE LAS FINANZAS PÚBLICAS EN SAN JOSÉ DE CÚCUTA DEL 2015-2017. APUESTAS COMPETITIVAS PARA EL FOMENTO DE LA PRODUCTIVIDAD DE LOS PRODUCTORES DE AGUACATE DEL MUNICIPIO DE BOCHALEMA, NORTE DE SANTANDER. USO DE SOFTWARE CONTABLE EN EL SECTOR COMERCIAL DE AUTOPARTES DEL MUNICIPIO DE SAN JOSE DE CÚCUTA MEDIDAS DE MITIGACIÓN Y ADAPTACIÓN SOBRE LAS EMISIONES DE GASES EFECTO INVERNADERO EN EL SECTOR TEXTIL DE NORTE DE SANTANDER ENFOCADAS AL COMERCIO INTERNACIONAL. EL TRABAJO SOCIAL DESDE LAS REPRESENTACIONES DE LOS ESTUDIANTES DE LICENCIATURA EN MATEMÁTICAS DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER ANÁLISIS DE LAS REPRESENTACIONES SOCIALES DEL MEDIO AMBIENTE COMO SUJETO DE DERECHOS A PARTIR DE LA SENTENCIA T - 622 DE 2016 EN FUNCIONARIOS PÚBLICOS DE CORPONOR EN LA CIUDAD DE CÚCUTA . ANALISIS DE LA TRANSCULTURACIÓN Y ADAPTACIÓN DE LOS INMIGRANTES VENEZOLANOS EN EL MUNICIPIO DE SAN JOSÉ DE SAN JOSÉ DE CÚCUTA. REALIDAD FRONTERIZA E IMPACTO SOCIAL DE LA MIGRACIÓN DE POBLACIÓN VENEZOLANA EN EL MUNICIPIO DE SAN JOSÉ DE CÚCUTA. (2016-2018) LAS ACTITUDES HACIA LAS MATEMATICAS EN ESTUDIANTES DE EDUCACION MEDIA: UN INSTRUMENTO PARA SU MEDICIÓN ESTRATEGIA DE INFORMACIÓN, EDUCACIÓN, COMUNICACIÓN PARA INCENTIVAR EL USO DE LAS TIC EN EL SEMILLERO DE INVESTIGACIÓN EN CIENCIAS SOCIALES FALS BORDA DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER DE LA CIUDAD DE SAN JOSÉ DE CÚCUTA EN EL AÑO 2018 SECUENCIA DIDÁCTICA PARA LA COMPRENSIÓN LECTORA DEL LENGUAJE ALGEBRAICO EN ESTUDIANTES DE GRADO SÉPTIMO INCLUSION DE LA POBLACION LGBTI DESDE LA DIVERSIDAD DE GÉNERO, ORIENTACIÓN E IDENTIDAD SEXUAL . CULTURA CIUDADANA Y PRÁCTICA DEMOCRÁTICA: UN ANÁLISIS DESDE CENTRO DE CONVIVENCIA CIUDADANA DE CÚCUTA IDONEIDAD DEL TÉRMINO "SORDOMUDOS" EN LA LEGISLACIÓN COLOMBIANA AL REFERIRSE A LA POBLACIÓN CON DISCAPACIDAD AUDITIVA VIOLENCIA SIMBÓLICA BASADA EN GÉNERO EN ESTUDIANTES CISGÉNERO, DEL PROGRAMA DE INGENIERÍA CIVIL, SEXTO SEMESTRE, DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER. ESTRATEGIA DE COMUNICACIÓN PARA LA VISIBILIZACIÓN DE LA MARCA ASOCIACIÓN CHICAS F - LA FORTALEZA, COMUNA 8 DE SAN JOSÉ DE CÚCUTA DISEÑO DE MODELO ARQUITECTÓNICO PARA CENTRO AGROECOLÓGICO EN CLIMA TROPICAL CÁLIDO: CASO ASENTAMIENTO LA FORTALEZA, SAN JOSÉ DE CÚCUTA, NORTE DE SANTANDER ANÁLISIS DE LAS ACTITUDES Y COMPORTAMIENTOS DEL NORTE SANTANDEREANO HACIA LOS INMIGRANTES VENEZOLANOS REPRESENTACIONES SOCIALES DEL TRABAJO INFORMAL DE LOS VENDEDORES EN LA COMUNA UNO Y CINCO DE CÚCUTA DERECHOS FUNDAMENTALES INNOMINADOS: EVOLUCIÓN, CONCEPTO Y APLICACIÓN. LA TEORIA DEL RIESGO PARA LA IMPUTACION DEL DAÑO EN LA RESPONSABILIDAD CIVIL EXTRACONTRACTUAL: CASO DE RITA SABOYA CABRERA Y OTROS CONTRA CONDENSA S.A. SISTEMAS CONSTRUCTIVOS PREFABRICADOS CON MATERIALES DE LA REGIÓN CON ENFOQUE SOSTENIBLE PARA LA CONSTRUCCIÓN DE VIVIENDAS ECONÓMICAS Y DE CALIDAD HABITACIONAL EN CÚCUTA. ESTRATEGIA DE MARKETING SOCIAL PARA LA PROMOCIÓN DE DERECHOS HUMANOS EN VÍCTIMAS DEL CONFLICTO ARMADO EN NORTE DE SANTANDER, 2018 RESIGNIFICACIÓN DEL RIO CATATUMBO TIBÚ – LA GABARRA: CRÓNICAS WEB PARA LA RECONSTRUCCIÓN DE MEMORIA HISTÓRICA A TRAVÉS DE LA TRADICIÓN ORAL IDENTIFICACIÓN DE MENÚ TÍPICO GRAMALOTERO PROSPECTIVA ESTRATÉGICA DESDE LA COMUNICACIÓN DIGITAL 2018 – 2020 PARA LA ASOCIACIÓN LA ASOCIACIÓN CHICAS F DE LA COMUNA 8 DE SAN JOSÉ DE CÚCUTA OBJETO VIRTUAL DE APRENDIZAJE (OVA), PARA LA ENSEÑANZA DEL INGLÉS EN NIÑOS DE PREESCOLAR Y/O TRANSICIÓN DE LA ESCUELA SAN VICENTE DE PAÚL, DE LA CIUDAD DE CÚCUTA CONTEXTO DEL USO DE LOS MEDIOS PUBLICITARIOS DE LA AVENIDA 0 ENTRE CALLE 2 Y 18 DE SAN JOSÉ DE CÚCUTA SEMANTICA DE LOS TÉRMICOS GASTRONOMICOS EN LA COCINA TRADICIONAL EN LOS SANTANDERES ANÁLISIS HISTÓRICO DE LA INCLUSIÓN EDUCATIVA DESDE LA PERSPECTIVA DEL MODELO PRAXEOLÓGICO DISEÑO E IMPLEMENTACIÓN DE PROCESOS DE EMPODERAMIENTO A TRAVÉS DEL PLAN DE COMUNICACIÓN ESTRATÉGICA 2018 – 2020 PARA LA ASOCIACIÓN LA ASOCIACIÓN CHICAS F DE LA COMUNA 8 DE SAN JOSÉ DE CÚCUTA ACCIONES Y CONCEPTOS DE LA COMUNICACIÓN PARA EL CAMBIO SOCIAL EN LAS ONG'S DEL DEPARTAMENTO NORTE DE SANTANDER 2018 RECONSTRUCCIÓN DE LA MEMORIA HISTÓRICA DEL CULTIVO TRADICIONAL DEL TRIGO EN MUTISCUA, NORTE DE SANTANDER. ESTRATEGIAS DE AFRONTAMIENTO Y ORIENTACIÓN SUICIDA EN ADOLESCENTES DE UN COLEGIO DE LA COMUNA 7 EN LA CIUDAD DE CÚCUTA SIGNIFICADO DE LA VENTILACIÓN MECÁNICA PARA LOS FAMILIARES DE PACIENTES QUE ESTUVIERON HOSPITALIZADOS EN LA UNIDAD DE CUIDADOS INTENSIVOS DE LA CLÍNICA MEDICAL DUARTE DURANTE EL SEGUNDO TRIMESTRE DE 2018 HALLAZGO DE Cryptococcus spp. A PARTIR DE AISLADOS AMBIENTALES DE Acanthamoeba spp. DE LA CIUDAD DE CÚCUTA, NORTE DE SANTANDER TIEMPO DE ESTIRAMIENTO ADECUADO EN LOS MUSCULOS ISQUIOTIBIALES Y SU EFECTIVIDAD EN LA GANANCIA DE ARCOS DE MOVILIDAD UTILIZANDO LA TECNICA SOSTENER RELAJAR EN ADULTOS JOVENES SANOS VIVENCIAS FRENTE AL ESTIGMA DE LA MATERNIDAD EN ADOLESCENTES, ASISTENTES A LA E.S.E HOSPITAL LOCAL DEL MUNICIPIO DE LOS PATIOS EN EL SEGUNDO SEMESTRE DE 2018 SISTEMAS DE INFORMACIÓN PARA LA GESTIÓN DE PROYECTOS DE OBRAS CIVILES PATRONES EN MOSAICOS Y TESELADOS DESDE COMPOSICIONES GEOMÉTRICAS SÍNTESIS Y CARACTERIZACIÓN DE ZEOLITAS A PARTIR DE CENIZAS VOLANTES PROVENIENTES DE LA COMBUSTIÓN DEL CARBÓN EN LA TERMOELÉCTRICA TERMOTASAJERO S.A.S POR EL MÉTODO DE HIDROGEL ELABORACIÓN Y ANÁLISIS DE UN ABONO APARTIR DE DIATOMEAS RECICLADAS, CARBOXIMETILCELULOSA Y FECULA DE MAIZ EN MEZCLA CON DISTINTAS CONCENTRACIONES DE NPK. PLAN DE NEGOCIO PARA LA PREPARACIÓN Y COMERCIALIZACIÓN DE PRODUCTOS DE REPOSTERIA A BASE DE FRUTAS DE LA REGIÓN EN EL MUNICIPIO DE CHITAGA NORTE DE SANTANDER ELABORACIÓN DE UNA GOMITA MASTICABLE A PARTIR DE PECTINA CITRICA FORTIFICADA CON CARBONATO DE CALCIO Y VITAMINA D DESARROLLAR LA CÁTEDRA 'TEORÍA DE LA COMUNICACIÓN I' DEL PROGRAMA DE COMUNICACIÓN SOCIAL DE LA UNIVERSIDAD DE PAMPLONA - CAMPUS VILLA DEL ROSARIO EMPLEANDO LA SERIE ANIMADA 'LOS SIMPSON' COMO HERRAMIENTA MEDIADORA . DETERMINACIÓN DE LA CULTURA DE RECICLAJE DE PLÁSTICO PET DE LOS HABITANTES Y ORGANIZACIONES DE OCAÑA ANÁLISIS DE PATOLOGÍAS ORIGINADAS EN LAS PERSONAS DEL MUNICIPIO DE OCAÑA NORTE DE SANTANDER A PARTIR DEL USO DE SISTEMAS COMPUTACIONALES SEGURIDAD INFORMÁTICA EN LA REGIÓN CATATUMBO: UNA REALIDAD QUE DEBE VIVIR TODO SISTEMA OPERATIVO DETERMINACIÓN DE LA CULTURA DE RECICLAJE DE PLÁSTICO PET DE LOS HABITANTES Y ORGANIZACIONES DE OCAÑA ANÁLISIS DE PATOLOGÍAS ORIGINADAS EN LAS PERSONAS DEL MUNICIPIO DE OCAÑA NORTE DE SANTANDER A PARTIR DEL USO DE SISTEMAS COMPUTACIONALES ANÁLISIS DE EMPRENDIMIENTO EMPRESARIAL EN LOS ESTUDIANTES DE CONTADURÍA PÚBLICA DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER OCAÑA PARADIGMAS DE LA EVOLUCIÓN DE LA PROFESIÓN CONTABLE: HISTORIA CONTADA EN LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER-OCAÑA FOOD MONITOR ESTUDIO DEL PENSAMIENTO TRIÁDICO EN INGENIERÍA DE SISTEMAS DESCRIPCIÓN DE LA ACTITUD DE LOS MICROEMPRESARIOS OCAÑEROS FRENTE A LAS NIIF. DISEÑO DE PRODUCTO TURISTICO DEL MUNICIPIO DE ABREGO NORTE DE SANTANDER, COLOMBIA DISEÑO DE PRODUCTO TURISTICO DEL MUNICIPIO DE LA PLAYA DE BELÉN NORTE DE SANTANDER, COLOMBIA ANÁLISIS DE LOS DERECHOS FUNDAMENTALES DEL ADULTO MAYOR PRIVADO DE LA LIBERTAD EN EL INSTITUTO NACIONAL PENITENCIARIO Y CARCELARIO (INPEC), DEL MUNICIPIO DE OCAÑA NORTE DE SANTANDER PROYECTO DE EXTENSIÓN SOLIDARIO: "FELICIDAD SIN FRONTERAS" DISEÑO DE UN PROTOTIPO DE INVERNADERO AUTOMATIZADO POR MEDIO DE UN MICRO CONTROLADOR ARDUINO CON EL FIN DE SIMULAR LOS FACTORES QUE INFLUYEN EN EL CRECIMIENTO DE UN CULTIVO DISEÑAR UN SISTEMA DE SEGURIDAD QUE SE ADAPTE EN LA CERRADURA MANUAL DE SOBREPONER UTILIZANDO UN MÓDULO DE RECONOCIMIENTO DE HUELLA DIGITAL, CON LA FINALIDAD DE TENER MAYOR CONTROL DEL ACCESO DE LAS PERSONAS DISEÑO DE PRODUCTOS TURÍSTICOS CON FINES DE APROVECHAMIENTO DEL POTENCIAL RELIGIOSO Y CULTURAL DEL MUNICIPIO DE RÍO DE ORO, CESAR DETERMINAR LA COMPRENSIÓN LECTORA DE LOS ESTUDIANTES DE CONTADURÍA PÚBLICA DE LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER OCAÑA LA ECONOMÍA IMPUESTA EN DOS MUNICIPIOS TESTIGOS DEL CONFLICTO ESTRATEGIAS PEDAGÓGICAS A LA EDUCACIÓN A PERSONAS EN CONDICIÓN DE DISCAPACIDAD AUDITIVA EN LA UNIVERSIDAD FRANCISCO DE PAULA SANTANDER-OCAÑA PROFUNDIZACIÓN DEL IMPACTO DE LA INFORMALIDAD: REALIDADES EMPRESARIALES DE LOS SALONES DE BELLEZA MOTOTAXISMO EN LA CIUDAD DE OCAÑA TENIENDO EN CUENTA LOS PUNTOS PRINCIPALES PARA DETERMINAR LA CONTAMINACIÓN ATMOSFÉRICA A TRAVÉS DE FACTORES DE EMISIÓN. CARACTERIZACIÓN DE LOS LODOS RESIDUALES EN TIEMPO DE VERANO GENERADOS EN EL PROCESO DE POTABILIZACIÓN DEL AGUA EN LA EMPRESA DE SERVICIOS PÚBLICOS DE OCAÑA ESPO S.A IMPLEMENTACIÓN PEDAGÓGICA A LOS ESTUDIANTES DE EDUCACIÓN MEDIA, DE LOS GRADOS 11°, EN LAS INSTITUCIONES EDUCATIVAS DEL MUNICIPIO DE ABREGO, NORTE DE SANTANDER, EN CUANTO AL APRENDIZAJE DE LOS DEBERES Y DERECHOS CON RELACIÓN A LOS MECANISMOS DE PROTECCIÓN CONSAGRADOS EN LOS ARTÍCULOS 23, 86 Y 88 DE LA CONSTITUCIÓN POLÍTICA DE COLOMBIA. ANÁLISIS DE LA DIRECCIÓN DEL CHORRO INYECTADO QUE INCIDE SOBRE LAS CUCHARAS, MEDIANTE LA ESTRUCTURA DE MEDICIÓN, PARA LA OPTIMIZACION DE FUERZA Y POTENCIA EN UNA MICROTURBINA PELTON PROPUESTA DE DISEÑO DE UNA MICROTURBINA MICHELL-BANKI EN EL SECTOR LA PRADERA OCAÑA, NORTE DE SANTANDER CONTROL, PROTECCIÓN Y REGULACIÓN DE LOS VANT EN COLOMBIA PENSAMIENTO TRIADICO Y RENDIMIENTO ACADEMICO EN ESTUDIANTES DE INGENIERIA DE SISTEMAS RESPONSABILIDAD DE LA ADMINISTRACIÓN LOCAL FRENTE A LOS IMPACTOS SOCIALES QUE PRODUCE LA EXPANSIÓN URBANA INFORMAL EN EL BARRIO FUNDADORES EN EL MUNICIPIO DE OCAÑA DESAFIOS Y OBSTACULOS DEL SECTOR INDUSTRIAL PARA LA GENERACIÓN DE EMPLEO EN OCAÑA SIMULACIÓN CDF TURBINA BANKI-MICHELL FTALATOS: REVISIÓN DE EFECTOS ADVERSOS CAUSADOS EN LA SALUD HUMANA Y EL MEDIO AMBIENTE COMPORTAMIENTO DEL PETFE Y POLICARBONATO PARA UN MATERIAL EFICIENTE EN CONSTRUCCIONES ANÁLISIS Y REVISIÓN DE LOS POLÍMEROS TERMOPLÁSTICOS UTILIZADOS EN LAS VÍAS Y EDIFICACIONES MODERNAS ADHESIVOS VERDES, REVISION DE UNA TECNOLOGIA INCORPORACION DE CENIZAS VOLANTES EN LOS PROCESOS DE FABRICACION DEL CEMENTO Y PRODUCTOS CERÁMICOS DE CONSTRUCCION EVALUANDO SUS PROPIEDADES ESTRUCTURALES Y MECÁNICAS: UNA REVISION DE LITERATURA DISEÑO E IMPLEMENTACIÓN DE LA RUTA AGROTURISTICA PARA EL MUNICIPIO DE GRAMALOTE APLICACIÓN DE POLÍMEROS EN LA ESTRUCTURA DEL PAVIMENTO ASFÁLTICO COMO ALTERNATIVA SOSTENIBLE PARA LA DISMINUCIÓN DE RESIDUOS PLÁSTICOS. UNA REVISIÓN DE LITERATURA REPRESENTACIONES SOCIALES DE EMPRESARIOS COLOMBIANOS, RESPECTO A LA ECONOMÍA EN LA FASE DE POSCONFLICTO DISEÑO DE SISTEMA AUTOMÁTICO DE CONTROL DE VELOCIDAD DE MOTOR BLDC APLICADO A AGITADOR DE ÓRBITA MODULAR DESARROLLO DE PELICULAS EN BASE DE NANOCELULOSA Y QUITOSAN: UNA REVISIÓN DESARROLLO DE PROTOTIPO DE ORTESIS PARA MIEMBRO SUPERIOR POR IMPRESIÓN 3D ; TOPICS Biological Physics (BIP) Gastronomy and Tourism (GT) Medical Physics (MEP) Arts and Culture Studies (ACS) Mathematical physics (MAP) Health and Sport Sciences (HSS) Chemical physics and physical chemistry (CHP) Pedagogical, Didactic Dractices and Educational Management (PDPEM) Computational science (CMSD) Social Sciences, and Communication (SSC) Electronics and devices Social Studies, Politics, and Law (SSPL) Instrumentation and measurement (IAM) Business, Management, and Finance (BMF) Education and communication (EAC) International Relations and Economics (IRE) Technology development and innovation (TDI) Education, Language, Literature, and Linguistics (ELLL) Environmmental and earth science (EES) Humanities Sciences, and Communication (HSC) ; PARTICIPATING INSTITUTIONS Universidad Francisco de Paula Santander - UFPS Fundación de Estudios Superiores Comfanorte - FESC Universidad Francisco de Paula Santander seccional Ocaña - UFPSO Escuela Superior de Administración Pública - ESAP Servicio Nacional de Aprendizaje - SENA - CEDRUM Universidad Nacional Abierta y a Distancia - UNAD Corporación Universitaria Minuto de Dios - UNIMINUTO Instituto Superior de Educación Rural - ISER Servicio Nacional de Aprendizaje - SENA - CIES Universidad de Pamplona - UNIPAMPLONA Universidad Santo Tomás - USTA Universidad de Santander - UDES Universidad Simón Bolívar - UNISIMÓN Universidad LIBRE Sede Cúcuta- UNILIBRE ; INTERNATIONAL SCIENTIFIC COMMITTEE •PhD María Judith Percino Zacarías Group of Polymers of the Chemical Center of the Benemérita Universidad Autónoma de Puebla - México •PhD Julio Omar Giordano Cornell University - USA •PhD Danae Duana Avila Universidad Autónoma del Estado de Hidalgo - México •PhD Manuel Eduardo Albán Gallo Universidad Tecnológica Equinoccial - Ecuador •PhD Manuel Enrique Bermudez University of Florida - USA •PhD Modesto Graterol Rivas Universidad del Zulia - Venezuel •PhD Verónica Teresa Guerra Guerrero Universidad Católica de Maule - Chile •PhD (c) Ely Dannier V. Niño Universidad Politécnica de Madrid - España ; NATIONAL SCIENTIFIC COMMITTEE •Judith Del Pilar Rodriguez Tenjo Universidad Francisco De Paula Santander – UFPS •Ender José Barrientos Monsalve Fundación de Estudios Superiores Comfanorte - FESC •Torcoroma Velásquez Pérez Universidad Francisco De Paula Santander seccional Ocaña – UFPSO •Martha Lucia Pinzon Bedoya Universidad de Pamplona - UNIPAMPLONA •Yesenia Campo Vera Instituto Superior De Educación Rural (ISER) •Valmore Bermudez Universidad Simón Bolivar - UNISIMON •Cindy Lizeth Niño Parada Universidad Santo Tomas - USTA •Jorge Alexander Rubio Parada Universidad Santo Tomas - USTA ; UNIVERSIDAD FRANCISCO DE PAULA SANTANDER UFPS Jhan Piero Rojas Suarez Judith Del Pilar Rodriguez Tenjo Olga Marina Vega Angarita Liliana Marcela Bastos Osorio Gladys Adriana Espinel Mawency Vergel Ortega Giovanni Mauricio Baez Sandoval Gloria Esperanza Zambrano Plata Jessica Lorena Leal Pabón Marling Carolina Cordero Díaz UNIVERSIDAD FRANCISCO DE PAULA SANTANDER SECCIONAL OCAÑA UFPSO Torcoroma Velasquez Perez Ivette Carolina Flórez Picón UNIVERSIDAD DE SANTAN DER UDES Lesley Fabiola Bohorquez ESCUELA SUPERIOR DE ADMINISTRACIÓN PÚBLICA ESAP Henry Caamaño Rojas SERVICIO NACIONAL DE APRENDIZAJE SENA CEDRUM Liana Carolina Ovalles Zulmary Carolina Nieto CORPORACIÓN UNIVERSITARIA MINUTO DE DIOS UNIMINUTO Yan Carlos Ureña Villamizar José Alberto Cristancho INSTITUTO SUPERIOR DE EDUCACIÓN RURAL ISER Yesenia Campo Vera UNIVERSIDAD SIMÓN BOLÍVAR UNISIMON Mauricio Sotelo Valmore Bermudez Marcela Flórez Romero Yurley Karime Hernández Peña SERVICIO NACIONAL DE APRENDIZAJE SENA CIES Wilmer Guevara UNIVERSIDAD SANTO TOMÁS USTA Cindy Lizeth Niño Parada Jorge Alexander Rubio Parada UNIVERSIDAD NACIONAL ABIERTA Y A DISTANCIA UNAD Alexander Suarez Universidad de Pamplona UNIPAMPLONA Oscar Gualdron Guerrero Martha Lucia Pinzon Bedoya FUNDACIÓN DE ESTUDIOS SUPERIORES COMFANORTE FESC Karla Yohana Sanchez Mojica