Suchergebnisse

The current report deals with the effect of transport time and associated transport conditions on animal welfare and meat quality. The work is part of the EU EU and Animal Welfare Agency /Swedish Board of Agriculture, funded project CATRA (QLK5—1999-01507: Minimising stress inducing factors on cattle during handling and transport to improve animal welfare and meat quality: www.bt.slu.se/catra/). The project was composed of eight work packages: Baseline survey, Effect of transport time (below 14 hours and long distance more than 14 hours), Effect of vibration and motion (to be conducted both in laboratory and field conditions), Optimising pre-and post-transport handling, Air quality in the vehicles, cattle transport logistics including route optimisation, and development of control system. The purpose of the project was to gather sufficient data and to develop methods for controlling and minimizing stress inducing factors during handling and transport of cattle; develop guide-lines and recommendation for end-users, such as meat and vehicle industries and the policy makers, to improve animal welfare and meat quality on the European level. This could be fulfilled through optimization of design of handling areas, transport vehicles, and transport-associated conditions, and by promoting an IT-supported effective logistic system. Hence cattle welfare and meat quality will be improved, thereby enhancing the economic competitiveness of producers and abattoirs. As part of CATRA, this part of the project is the work done in Sweden regarding the effect of transport time, with the objective of determining the effect of transport time (up to ll hours) on animal welfare and post mortem meat quality, when cattle are transported from farms to abattoirs by commercial vehicles. The ultimate objective is to optimise transport time in relation to welfare and meat quality taking into consideration other stress inducing factors. Animals on which the experiments performed were cows, heifers, bulls and calves. Response parameters that were considered were: blood parameters (cortisol, glucose, lactate, CK,), clinical parameters (heart rate, postural stability), meat parameters (bruising score, PH-24, tenderness), and ethological parameters. Input parameters considered were parameters for loading facilities (ramps, lifts), penning systems (stocking density, social group, standing orientation, design of loading compartment), air quality (air speed, relative humidity, evenness of temperature in the compartment, level of NH3, CO2), vibration, transport time, resting time, and feeding regimes. Simultaneous and continuous measurement of heart rate, body temperature, air quality parameters, and video recording was conducted from farm to the abattoirs. Blood samples were taken before and after transport, and also during resting. The results obtained indicated that the transport and handling events are stressful for the animals as a whole, and loading and un-loading are among the most stressful events in the studied conditions. Regarding transport time, the results showed that transport time after six hours is particularly stressful for the animals when transported with usual vehicles without special equipments. In this case, it was reported a significant correlation between transport time and animal stress evaluated by physiological parameters. However, less detrimental effect of transport time on meat quality has been observed. It may therefore be concluded that transport time has influences more on animal welfare than meat quality when transported in conventional vehicles. Transport preceding and initiating conditions and processes such as keeping system, preparation, loading, planning and management, as well as unloading and lairage at the end of the transport chain are important challenges bearing various possibilities to improve welfare and meat quality. Loading and unloading facilities (such as ramp, driveways, and side-block) and quality, of floor have significant influence on both welfare and meat quality. Cattle from tied housing systems are more stressed by transport than untied cattle and there is a greater risk to develop bad carcass- and meat quality. As regard to air quality, the concentration level of ammonia and carbon dioxide increase with transport time and it occasionally passes the acceptable level when only natural ventilation is used. During the field experiment no detectable methane has been found. To prevent thermal stress, the installation of mechanical ventilation system (both for cooling and heating purposes) is recommended. The conclusions deduced from the current studies are as follows: - Transport conditions, as a whole is stressful for animals and compromise their welfare. - Loading and unloading activities are the most stress inducing factors identified using the heart rate measurements and behaviour observations - Result of the analysis of blood parameters showed that level of stress correlates with transport time. Calves are most sensitive to transport time followed by bulls, and cows are relatively less sensitive to transport length. - Transport time after six hours is stressful for the animals when transported with usual vehicles without special equipments. However, less detrimental effect of transport time on meat quality has been observed, - The evenness of temperature in the loading pens depends on season and number of stops - Concentration level of ammonia and carbon dioxide increase with transport time and it occasionally passes the acceptable level.

When animals are exposed to a novel situation such as transportation, they react by eliciting certain physiological and behavioural functions in order to cope with the situation. These changes can be measured to indicate how much stress the animal is suffering. Physiological stress indicators often measured in animal transport research include changes in heart rate, live-weight, cortisol levels, and blood composition including electrolytes, metabolites and enzymes (Broom and Johnson, 1993). Animal behavioural stress indicators include struggling, vocalisation, kicking or biting, hunching of the back, urination, defecation and recumbence (Broom et al. 1996; Gregory, 1998). Meat quality parameters post mortem can also help to indicate stress levels in animals (Grandin, 1990; Gregory, 1998). These include incidence of bruising and DFD in all farm animal species and PSE in pigs. Mortality is also an obvious indicator of poor welfare. Combined aspects of transport that contribute to causing stress in livestock include loading and unloading procedures, close proximity to stock handlers, water/feed deprivation, noise, riding in a truck, mixing with other animals and being forced into unfamiliar environments. The responses of stock to these conditions will depend on the animal's genetically controlled adaptability, physical condition and its previous handling experiences (Gross and Siegel, 1993). Factors such as the adequate preparation of animals for transport, controlled prior access to feed and water, minimal disruption to social groups, considerate animal handling skills, adequate handling and transport facilities including good ventilation in trucks, and careful driving technique are major areas that dictate the standard of animal transport. For example, considerations for pigs should include a pre-transport fasting period which balances the requirement to avoid hunger, travel sickness and deaths. Breeding and selecting for more stress-resistant genotypes of pigs can improve the welfare by reducing mortality and the metabolic consequences of transport stress. Other factors influencing animal transport include farm size and country size. For example, livestock transport in Scandinavia involves transport vehicles travelling to more than one farm in order to fill a vehicle. In Australia often one farm pick up can fill a truck, and although the distances may be much longer to the abattoir, it will be more direct. The market demand dictates the type of animals transported. For example the veal trade in Europe demands young live calves to be transported over long distances from northern countries which supply it to the southern countries which demand it. This trade exists in live animals rather than meat because the demanding countries further fatten and slaughter these animals specific to their needs. The industry set up influences the standard of animal transport in different countries. For example in countries where industries are vertically integrated consisting of producer-owned slaughter plant co-operatives (Sweden and Denmark), producers are paid according to slaughter weight and lean meat percentage, therefore there is more consistent quality control measures in place. In Australia the marketing system is such that it provides no economic incentive to reduce losses. Greater public awareness of animal welfare seems to be increasing in western countries, and as a result there is more pressure on the livestock industry to adopt better standards for the farming, handling, transport and slaughter of animals. The transport of livestock in Australia continues to be under increased scrutiny from overseas markets and animal welfare groups. In the European Union (EU), public pressure has been a successful instigator to the drafting and continued improvement of comprehensive legislation for animal transport. EU animal transport laws cover aspects such as minimum design standards for livestock vehicles (including ventilation controls), maximum journey lengths before resting intervals, stocking rates, what animals are considered as fit to travel, and general handling and care requirements of animals in transport. These laws are causing debate between northern and southern countries in areas such as maximum journey lengths and vehicle design standards. Some countries such as the UK have also gone to a great effort to adjust national laws in order to incorporate EU transport laws, but countries such as Spain and Italy have not. Typically it is these countries that more often have poor standards of animal welfare, and the welfare of farmed animals has historically been of low priority (Schmidt, 1995). When and how these countries will adopt the comprehensive EU animal transport regulations, continues to be an unanswered and politically sensitive question between EU member states.

Biodiversity conservation is an important contemporary issue on global, EU and national policy agendas. However, in the face of human economic development, the important question is how to protect, maintain and restore biodiversity, without compromising economic and social dimensions of sustainability. Two sectors that can to a large extent influence biodiversity are forestry and road infrastructure development. Forestry is a sector very important for biodiversity conservation, since a large amount of protected and threatened species resides in forest ecosystems and many natural processes crucial for biodiversity occur in the forest. In addition, forests and woodlands form a network of habitats for many area-demanding species. Due to intensive forest management and fragmentation of forest and woodlands many elements of biodiversity are threatened, including species, habitats and processes. Road infrastructure development is another process that can negatively influence biodiversity. A growing network of transport infrastructure without doubt affects the functionality of the forest habitat networks. Negative effects include traffic mortality due to road collisions and barrier effect for individuals caused by high traffic volume, noise, wide roads and fencing. Cumulative effects of the infrastructure development can also lead to a loss of different elements of biodiversity at the landscape scale. Poland, with a legacy of less intensive forest management and still without a well-developed road infrastructure, is fortunate in terms of biodiversity maintenance. Due to economic underdevelopment of some regions of the country, Poland is rich in natural values including specialized species, functional habitat networks and ecological processes. However, after entering the European Union, Poland has started a process of rapid economic development, mainly with the help of EU funding. Enhancing road infrastructure is presently a key issue of economic development in this country. Dramatic growth in the amount of new roads can have large scale consequences for the biodiversity of the country, and can even influence biodiversity at the European scale. Policies aiming at biodiversity maintenance underline the need for implementing sustainability ideas in the planning and management for biodiversity. Traditionally, economic, environmental and social pillars of sustainability are identified. To be able to balance these three dimensions in the efforts for biodiversity conservation, there is a need to incorporate social dimensions in the nature science research concerning biodiversity. Especially, consideration of local attitudes is necessary in planning for biodiversity conservation. The aim of this thesis is to examine actors' attitudes and underlying values in two situations of conflict related to biodiversity conservation in Poland. One case concerns forest management in a biodiversity hot-spot, Białowieża forest and the other is about a development of a controversial road project of Augustów bypass. The results show that differences in attitudes may have various sources. The knowledge possessed by actors, their values, as well as scale at which they perceived biodiversity issues were identified as the main reasons for different attitudes. It was observed that in general, the actors whose attitudes were more "ecologically oriented" had to a large extent a cognitive view, that is their attitudes were mainly based on cognition (ecological knowledge) while "socially" or "economically oriented" actors' attitudes were more connected to emotions. In addition to differing attitudes, lack of trust was recognized in both cases as a factor escalating the conflict. The results showed also that legal issues are crucial to consider when biodiversity conservation is at stake. The results may have implications for the practical biodiversity conservation, since they show that both learning and legal incentives would be beneficial for the biodiversity conservation in controversial planning cases. This calls for the need for neutral forum for efficient public participation, communication and trust building between the actors and learning about important issues

The aim of this thesis is to understand the decision-making processes concerning ice-breaking along the coast of Norrland, with the specific aim to analyse the activities of regional interest groups in the Norrland region and government agents at different administrative levels at the key stages of the decision-making processes: initiation, drafting and decision-making. The thesis also explores how institutional factors at different administrative levels affected the agents that were involved at those stages of the decision-making processes. As navigation along the northern Swedish coast must negotiate winter conditions which causes ports to freeze over, the government ice-breaking service functions as an instrument to compensate the export firms in Norrland for these constrains. Year-round navigation in the north Swedish coastal waters was achieved through a series of decision-making processes that took place during the period from 1940 to 1975. These decision-making processes are important to study since ice-breaking was an integrated component of the expanding heavy basic industries in Norrland and thereby for the rapidly growing exports during the 1950s and 1960s. This period is the decisive point in the economic history of the Norrland region regarding how the natural resources should be exploited and how exports should be advanced. This study concludes that the decision-making processes were initiated by government agents at different administrative levels. Official investigatory commissions were set up at several occasions to deal with issues related to the government ice-breaker service by the ministries responsible for ice-breaker policy. It is also demonstrated that the decision-making processes concerning ice-breaker investments were initiated by the government boards that were responsible for the operation of the ice-breaker service. In this respect, the study concludes that the government activities during the initiation stages should not be confused as a sign of regional interest group passivity on these issues. The activities of the interest groups during the initiation stages were primarily intended to draw attention to the problems caused by winter to regional shipping, in order to put the issue on the political agenda. As the decision-making processes proceeded into the drafting stages, the participation from regional interest groups was much more significant as the government offered interest groups forums and procedures for structural consulting through various organisational arrangements. The regional interest groups that participated in those arrangements were industrial firms in the heavy basic industries sector. In those cases other regional interest groups participated, they would promote the interests of those firms. As a result, the final drafts from committees and government bodies included arguments that favoured an expansion of ice-breaking to promote the growth of the heavy basic industries in the Norrland region. The analysis of the decision-making stages suggests that a combination of institutional factors at different administrative levels contributed to the outcome of the decision-making processes. One result is that the general aims of macro policy such as trade policy, growth policy and regional development policy were favourable towards an expansion of the government ice-breaker service, which would benefit the export industries in the Norrland region. Another result is that the sectoral organization within the government maritime bodies contributed significantly to the outcome of the decision-making processes. Large-scale planning and operational experimentation was allowed to take place within the ice-breaker service, which convinced the government that ice-breaking and winter navigation was a feasible transport alternative.

In this dissertation, the Swedish transport aid constitutes a case study with the aim of empirically testing the presence of institutional path dependency. In New Institutional Economics the concept institutional path dependency is used for analyzing why institutions that do not promote growth are developed even when better solutions are available. In this study, institutional path dependency is defined in the following way: institutional path dependency is when new institutional conditions develop in a way that maintains an economic and social practice within the sector of the economy that the institutional condition regulates. The transport aid was introduced in 1971 and is a part of Swedish regional policy. The transport aid is allocated to certain goods-producing companies in northern Sweden in order to subsidize their cost of transportation. The aim was that these companies would strengthen their ability to compete in markets in southern Sweden and abroad. In order to perform a test of the existence of path dependency, three criteria for path dependence were defined. The first of these criteria is that new institutional conditions arise with a maintained practice within the regulated sector. The second criterion for path dependency is that the institutional condition subsists when there are other alternatives which are better and well-known from the point of view of public economy. A third criterion for path dependency is that an institutional condition is given a new legitimacy when interest groups state new motives for it. The study has shown that a practice from the previous traffic policy has lived on in the institutional condition of the transport aid, through a continued subsidization of the cost of transportation similar to a historical tradition in early railway policy (for example in the Norrland tariff). A relatively large part of the transport aid has in practice been subsidizing transports of relatively unprocessed goods, which was a reason for the criticism that the transport aid received in previous studies. A practice from earlier traffic policy, which entailed leveled costs of transportation, has been difficult to combine in practice with goals from regional policy that have emphasized growth and industrial development. This indicates a path dependent development of the transport aid, since it's practice seems to be related to another "path" than main stream regional policy. Since the transport aid was continuously criticized in parliamentary reports and debates for conserving the economic structure in the support area and for distorting the competition on the transport market, there was probably a certain pressure to change the transport aid or replace it with other measures that were more neutral with regard to competition. This pressure of change was brought to a head in the parliamentary resolution from 1990, when the Government suggested radical changes in the design and organization of the transport aid. The Government bill was however rejected by Parliament, and the transport aid continued in the same form as before. Therefore, the transport aid has not followed changes in regional policy at large, neither with regard to organization nor formal goals, in spite of the fact that both the Government and the officials in the Transport Council (the administrative organization) have urged on an adjustment of the transport aid to fit the general direction of the regional policy at large. If the general direction of the regional policy in the 80s and 90s reflects a more growth oriented economic policy, then the transport aid has resisted institutional change, in spite of the fact that better and more well-known alternatives have existed with regard to promoting growth. The second criterion for institutional path dependency may therefore be considered fulfilled. Interest groups have on several occasions expanded the base for legitimacy of the transport aid by presenting new arguments to support it. One example of expanded legitimacy is that the transport aid was directed towards small and medium-sized companies in the 1980s. Such arguments were not presented when the transport aid was introduced in 1970, but was later emphasized by members of the Center Party and the Social Democratic Party. An interesting aspect of this institutional change is that the new motives also were characterized by ideological preferences for equality, since the transport aid with the help of this change would be able to support small firms in their competition with large firms in the same sector. This supports the assertion that the legitimacy of the transport aid has been derived from informal ideological preferences for equality rather than ideological preferences for growth, though the formal goals for the transport aid have been growth related. The conclusion is consequently that interest groups over time have managed to establish a stronger ideological legitimacy for the transport aid. All three criteria for institutional path dependency can therefore be considered fulfilled in the case of the transport aid. ; digitalisering@umu