Suchergebnisse

In this study, a new approach for producing phosphorescent aluminum coatings was studied. Using the plasma electrolytic oxidation (PEO) process, a porous oxide coating was produced on the Al6082 aluminum alloy substrate. Afterwards, activated strontium aluminate (SrAl2O4: Eu2+, Dy3+) powder was filled into the cavities and pores of the PEO coating, which resulted in a surface that exhibits long-lasting luminescence. The structural and optical properties were studied using XRD, SEM, and photoluminescence measurements. It was found that the treatment time affects the morphology of the coating, which influences the amount of strontium aluminate powder that can be incorporated into the coating and the resulting afterglow intensity. ; This research project was supported financially by ERDF Project No: Nr.1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

This research is funded by the Latvian Council of Science , project "Novel transparent nanocomposite oxyfluoride materials for optical applications", project No. LZP-2018/1–0335 . The crystal growth research was funded by the CNPq (Brazil), project NO 421581/2016–6 . ; Recombination luminescence (RL) and RL-detected electron paramagnetic resonance (RL-EPR) in BaY2F8 single crystal has been investigated after irradiation with X-rays at low temperature. The recombination process, which lasts for several hours at 4 K, results in several broad bands in the RL spectrum. RL-EPR spectra show pronounced angular dependences on crystal orientation relative to external magnetic field. Based on the determined spin-Hamiltonian parameter values the recombination centres have been proposed to be F-type electron and self-trapped hole (VK) centres ; Latvian Council of Science LZP-2018/1–0335; CNPq 421581/2016–6; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

Financial support provided by Scientific Research Project for Students and Young Researchers Nr. SJZ/2016/12 realized at the Institute of Solid State Physics, University of Latvia is greatly acknowledged. Authors are grateful to R. Ignatans for measurements and analysis of XRD spectra and ElGoo Tech ltd. for providing PEO equipment. ; For decades, plasma electrolytic oxidation (PEO) coatings are actively studied and applied to protect the surface of various valve metals from chemical or mechanical damage. However, over the last couple of years intense research is being done to explore additional possibilities of the PEO coatings apart from their classical application. One of the possible additional uses is thermostimulated luminescence dosimetry that is already widely applied for environmental and health monitoring. This research proposes a method to produce a novel functional coating on aluminium surface exhibiting intense thermostimulated luminescence signal that could be used for dosimetry of ionizing radiation. The result was achieved using plasma electrolytic oxidation with modified electrolyte to introduce carbon ions into the oxide thus inducing defects in the crystalline structure of the coating. Al6082 aluminium alloy was used as a substrate, KOH and ethanol mixture as an electrolyte. A bipolar pulsed regime was used for 15 min. The obtained coating combines the desired luminescence properties with a good mechanical stability due to the relatively hard cubic phase of the coating. Scalability of the technology and low production cost makes the coatings prospective for various practical applications. ; ISSP UL Scientific Research Project for Students and Young Researchers Nr. SJZ/2016/12; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

This work was supported by the ERDF , European-Union Project No. 1.1.1.1/16/A/182 . ; This study presents a novel approach to produce phosphorescent coatings on metal surfaces. Strontium aluminates are the most popular modern phosphorescent materials exhibiting long afterglow at room temperature and a broad spectral distribution of luminescence in the visible range. However, despite a large amount of research done, methods for synthesis of such materials remain relatively energy inefficient and environmentally unfriendly. A long-afterglow luminescent coating containing SrAl2O4:Eu2+, Dy3+ is prepared by the plasma electrolytic oxidation on the surface of commercial aluminum alloy Al6082. During the electrical discharges in this process, the strontium aluminate is formed in a similar way to the solid-state reaction method. X-ray powder diffraction analysis confirms that the monoclinic SrAl2O4 phase is present in the coating. Optical properties of the obtained coating were analyzed with luminescence methods classically used for studies of luminophores. The performance of the coating was compared with commercially available strontium aluminate powder. The proposed method of coating synthesis may be of value for the development of energy-efficient and long-lasting automotive and public safety infrastructure. ; European Regional Development Fund 1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²