Suchergebnisse

This work was supported by the UL ISSP grant for Scientific Research Projects for Students and Young Researchers SJZ/2016/15 . ; In this work we demonstrate a method where by adding Nb ions, Ln3+ ion luminescence intensity in HfO2 is increased for up to 15 times (in a sample containing 5 mol%Eu). The effect is described as niobium acting as a charge compensator and neutralizing the charge resulting from Ln3+ ion insertion in Hf4+ site and hence reducing the number of defects present. This is the second system where such an effect was observed, so it is expected that other metal oxides would show the same effect. The optical properties of HfO2: Eu3+ and HfO2: Eu3+, Nb5+, synthesized using the sol-gel method and annealed at various temperatures are studied. A conclusion that the structure of hafnia does not affect luminescence intensity directly and a larger role is played by factors such as defect presence and the size of the particles is drawn based on XRD and TSL measurements. Time-resolved luminescence measurements were also carried out and significant changes depending on dopant concentration and annealing temperatures were observed. Judd Ofelt theory was used to determine quantum efficiency and the local symmetry of Eu3+ ion sites. ; ISSP UL SJZ/2016/15; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

The financial support of research grants ERA.NET RUS_ST20170-051 and SFERA II project "Transnational Access activities" (EU 7th Framework Programme Grant Agreement N312643). This work was partly supported by the Russian Foundation for Basic Research, project no. 18-52-76002. ; ZnO nanocrystals, undoped and doped with Iridium or Indium were prepared by solar irradiation in Heliotron reactor in PROMES CNRS facilities, France. The comparative analysis of the excitonic spectra of ZnO single crystal and ZnO nanocrystals (NCs) doped with In and Ir was performed. It is shown that the excitonic processes in Ir doped nanocrystals coincide well with electronic processes in undoped NC and single crystal; however, the electronic processes in In-doped nanocrystals are significantly different from those in single crystal. The radioluminescence spectra of ZnO:In was analysed and additional luminescence band at ∼3.18 eV was detected due to In-doping. The luminescence decay time depends on In concentration in nanocrystals and is significantly less in ZnO:In compared with undoped nanocrystals. The fast scintillation of ZnO:In makes this material promising for application. ; Russian Foundation for Basic Research 18-52-76002; Seventh Framework Programme N312643; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

This research project was supported financially by ERDF Project No: Nr.1.1.1.1/16/A/182 . ; SrAl2O4:Eu,Dy is a very efficient long afterglow phosphor with wide range of possible applications. The luminescence properties and the possible luminescence mechanism of this material have been studied extensively, but there is almost no information available about the undoped material. Therefore, this article deals with the luminescence and thermally stimulated luminescence of an undoped SrAl2O4, revealing the possible defects that might be involved in the creation of the long afterglow in doped material. We conclude that undoped material exhibits some luminescence under X-ray irradiation in low temperature; close to room temperatures luminescence is almost fully thermally quenched in comparison to low temperatures. We can observe F and F2 center luminescence as well as trace metal luminescence in the emission spectrum. TSL glow curve yields the peaks that are close to those observed in material with Eu and Dy doping; therefore these peaks are clearly related to intrinsic defects. The peak at around 400 K, that is shifting with rare earth doping, might be due to dopant interaction with intrinsic defects. ; European Regional Development Fund Nr.1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

This work was conducted with the funding of Scientific Research Project for Students and Young Researchers realised at the Institute of Solid State Physics, University of Latvia [SJZ/2018/2]. ; Ever since the discovery of SrAl2O4:Eu,Dy persistent afterglow material, that can intensively glow up to 20 h, the mechanism of long-lasting luminescence has been a popular area of research. The research is focused on discovering the mechanism of persistent luminescence in order to prolong the duration and intensity of afterglow in a controlled way. Although most researchers agree on the general things, there are still many unclarities and ambiguities to discuss upon. This review paper briefly sketches in the highlights of past research on the luminescence mechanism in SrAl2O4:Eu,Dy, mainly focusing on the research conducted in the past decade dedicated to clearing these ambiguities. This paper provides an overview of the latest persistent luminescence mechanisms offered by researchers. ; Latvijas Universitate SJZ/2018/2; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

This research project was supported financially by ERDF Project No 1.1.1.1/16/A/182. ; ERDF Project No 1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

The research has been supported by project ERA.NET RUS_ST2017-05 (Latvia) and No. 18-52-76002 (Russia). The Institute of Solid State Physics, University of Latvia as the Centre of Excellence has received funding from the European Union's Hori-zon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-Teaming-Phase2 under grant agreement No. 739508, project CAMART². ; The near-band luminescence of doped ZnO is promising for advanced scintillators; however, the dopant type and concentration effects require a detailed study. Undoped and Ga-doped ZnO nanopowders were prepared by a microwave-assisted solvothermal method and the gallium concentration effect on luminescence properties was studied. The near-band luminescence peak position dependence on gallium concentration was observed. Near-band luminescence intensity versus defect luminescence intensity ratio was explored for different gallium concentrations and the optimal value was determined. Samples were prepared with dopant concentrations between 0.2 and 1.5 at%, XRD analysis confirmed that samples contained only zinc oxide hexagonal wurtzite phase. The results of the research showed that ZnO:Ga containing 0.9 at.% gallium was promising for scintillators.---//---This work is licensed under a CC BY 4.0 license. ; ERA.NET RUS_ST2017-05 (Latvia) and No. 18-52-76002 (Russia). The Institute of Solid State Physics, University of Latvia as the Centre of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-Teaming-Phase2 under grant agreement No. 739508, project CAMART².

Financial support provided by Scientific Research "Luminescence Mechanisms and Dosimeter Properties in Prospective Nitrides and Oxides Using TL and OSL Methods" LZP FLPP No. LZP-2018/1-0361 implemented at the Institute of Solid State Physics, University of Latvia is greatly acknowledged. The Institute of Solid State Physics, University of Latvia as the Centre of Excellence has received funding from the European Union's Horizon 2020 Framework Program H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART². ; Many medical examinations involve ionizing radiation. Although the range of available dosimeters is rather wide, their linearity and chemical stability are limited. Recently, there has been a growing interest in new, improved dosimetric materials for emerging applications in medicine and other fields, such as sterilisation of consumer goods and medical instruments, irradiation of seeds, chemical agents and others.One of the classical dosimeters is carbon-doped alumina (Al2O3:C) – a well-established and widely used material for personal and industrial dosimeter with a range of great properties, such as high sensitivity, wide linearity range and relative ease of production and handling. However, the demand for reliable dosimeters in a high-dose range is still only partially fulfilled, and alumina doped with chromium ions (Al2O3:Cr) can be a promising candidate.In this study, we explored alumina doped with chromium porous microparticles synthesized with a sol-gel method as a possible high dose dosimeter and evaluated its thermostimulated luminescence signal, dose response with two irradiation sources and measured long-time fading. It was found that although the TSL signal was quite complex (consisting of two main peaks above room temperature) and the long-term fading was significant (around 50 % in the span of 30 days), with sufficient optimisation the material could be used as a high-dose dosimeter for X-ray and beta irradiation. Wide high dose linearity range, physical and chemical characteristics, as well as low production costs and ease of synthesis make chromium (III) doped alumina a compelling candidate for applicability in various medical and industry field. ---//---This work is licensed under a CC BY 4.0 license. ; LZP FLPP No. LZP-2018/1-0361; the Institute of Solid State Physics, University of Latvia as the Centre of Excellence has received funding from the European Union's Horizon 2020 Framework Program H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART².

In this study, a new approach for producing phosphorescent aluminum coatings was studied. Using the plasma electrolytic oxidation (PEO) process, a porous oxide coating was produced on the Al6082 aluminum alloy substrate. Afterwards, activated strontium aluminate (SrAl2O4: Eu2+, Dy3+) powder was filled into the cavities and pores of the PEO coating, which resulted in a surface that exhibits long-lasting luminescence. The structural and optical properties were studied using XRD, SEM, and photoluminescence measurements. It was found that the treatment time affects the morphology of the coating, which influences the amount of strontium aluminate powder that can be incorporated into the coating and the resulting afterglow intensity. ; This research project was supported financially by ERDF Project No: Nr.1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

V.V. acknowledges the financial support of ERDF PostDoc project No. 1.1.1.2/VIAA/3/19/440 (University of Latvia Institute of Solid State Physics, Latvia) and K.S., I.B., A.Z., D.M. and K.L. acknowledge the financial support of ERDF, European-Union Project No. 1.1.1.1/16/A/182 (University of Latvia Institute of Solid State Physics, Latvia). ; Temperature dependence of the afterglow of persistent luminescence material SrAl2O4:Eu,Dy is a major problem for outdoor low temperature applications. Therefore this publication deals with tailoring the material for better outdoor use by exploring the second mechanism, that is involved in the afterglow – charge tunnelling from the trapping center to the luminescence center. Structure, morphology, emission and thermally stimulated luminescence properties have been measured for SrAl2O4:Eu,Dy samples with different added boron percentage. The results indicate a change in morphology of the samples with increasing boron concentration, as well as a change in afterglow times. The low temperature luminescence intensity and afterglow time dependence of boron addition turns out to be different from the room temperature luminescence intensity and afterglow time dependence from boron concentration. Boron addition in necessary amount plays a key role to creating trapping centers in the material that are located spatially close to the luminescence center thus making the material afterglow possible even in low temperatures. ; ERDF PostDoc project No. 1.1.1.2/VIAA/3/19/440; ERDF 1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

Financial support provided by Scientific Research Project for Students and Young Researchers Nr. SJZ/2016/12 realized at the Institute of Solid State Physics, University of Latvia is greatly acknowledged. Authors are grateful to R. Ignatans for measurements and analysis of XRD spectra and ElGoo Tech ltd. for providing PEO equipment. ; For decades, plasma electrolytic oxidation (PEO) coatings are actively studied and applied to protect the surface of various valve metals from chemical or mechanical damage. However, over the last couple of years intense research is being done to explore additional possibilities of the PEO coatings apart from their classical application. One of the possible additional uses is thermostimulated luminescence dosimetry that is already widely applied for environmental and health monitoring. This research proposes a method to produce a novel functional coating on aluminium surface exhibiting intense thermostimulated luminescence signal that could be used for dosimetry of ionizing radiation. The result was achieved using plasma electrolytic oxidation with modified electrolyte to introduce carbon ions into the oxide thus inducing defects in the crystalline structure of the coating. Al6082 aluminium alloy was used as a substrate, KOH and ethanol mixture as an electrolyte. A bipolar pulsed regime was used for 15 min. The obtained coating combines the desired luminescence properties with a good mechanical stability due to the relatively hard cubic phase of the coating. Scalability of the technology and low production cost makes the coatings prospective for various practical applications. ; ISSP UL Scientific Research Project for Students and Young Researchers Nr. SJZ/2016/12; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

The financial support of research European Union ERA.NET RUS_ST20170-51 . This work was partly supported by Russian Foundation for Basic Research, Russia , project No. 18-52-76002 . The sample preparation was carried out as part of SFERA II project -Transnational Access activities ( European Union 7th Framework Programme Grant Agreement N3126430 ). ; The effects of indium concentration influence on the morphology, luminescence spectra and luminescence decay kinetics of ZnO:In nanocrystals prepared by the solar physical vapour deposition method are investigated. While undoped ZnO nanocrystals exhibit tetrapod-like morphology, with increasing indium concentration the tetrapods are transformed into particles whose average size decreases with increasing indium concentration. The results of time-resolved luminescence studies of undoped and indium doped ZnO nanocrystals showed that by increasing indium concentration the decay time falls and luminescence intensity decreases. ; ERA.NET RUS_ST20170-51; Russian Foundation for Basic Research No. 18-52-76002; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

This work was supported by institutional research funding ( IUT34-27 and IUT2-14 ) of the Estonian Ministry of Education and Research . ; We studied structure and oxygen-sensitive photoluminescence (PL) of ZrO2:Eu,Nb nanocrystalline powders synthesized via a sol-gel route and heat-treated up to 1200 °C. The material containing only 2 at% Eu3+ was predominantly monoclinic, whereas 8 at% of Eu3+ stabilized tetragonal phase. Comparable amount of niobium co-doping effectively suppressed the formation of tetragonal phase. PL of Eu3+ ions was observed under direct excitation at 395 nm. PL decay kinetics showed that the luminescence was partially quenched, depending on doping concentrations and ambient atmosphere. At 300 °C, the PL intensity of all samples systematically responded (with up to 70% change) to changing oxygen content in the O2/N2 mixture at atmospheric pressure. At low doping levels, the dominant factor controlling the PL intensity was an energy transfer from excited PL centers to randomly distributed defects in the ZrO2 lattice. We argue that the charge transfer between the defects and adsorbed oxygen molecules alters the ability of the defects to quench Eu3+ luminescence. At high doping levels, another type of sensor response was observed, where some Eu3+ emitters are effectively switched on or off by the change of ambient gas. A remarkable feature of the studied material is a reversing of the sensor response with the variation of the Nb concentration. ; Estonian Ministry of Education and Research IUT34-27 and IUT2-14; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

V.V. acknowledges the financial support of ERDF PostDoc project No. 1.1.1.2/VIAA/3/19/440 (University of Latvia Institute of Solid State Physics, Latvia) and LP the Academy of Finland (Flagship Programme, Photonics Research and Innovation PREIN 320165 and Academy Project -326418) for the financial support. Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01- 2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART 2 . ; SrAl2O4: Eu, Dy, B particles were added in a phosphate glass (90NaPO3-10NaF (in mol%)) using the direct doping method. For the first time, the composition of the particles prior to and after embedding them in the glass was analysed using EPMA analysis. Boron was found to be incorporated in already distorted surroundings creating new trapping centers in the particles which are thought to be favourable for the tunnelling process and so for the afterglow at 10K. Despite the partial decomposition of the particles, the glass exhibit afterglow at low temperature confirming to be promising materials for low temperature applications. ; ERDF 1.1.1.2/VIAA/3/19/440; LP the Academy of Finland 320165 and 326418; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017 TeamingPhase2 under grant agreement No. 739508, project CAMART²

This work was supported by the ERDF , European-Union Project No. 1.1.1.1/16/A/182 . ; This study presents a novel approach to produce phosphorescent coatings on metal surfaces. Strontium aluminates are the most popular modern phosphorescent materials exhibiting long afterglow at room temperature and a broad spectral distribution of luminescence in the visible range. However, despite a large amount of research done, methods for synthesis of such materials remain relatively energy inefficient and environmentally unfriendly. A long-afterglow luminescent coating containing SrAl2O4:Eu2+, Dy3+ is prepared by the plasma electrolytic oxidation on the surface of commercial aluminum alloy Al6082. During the electrical discharges in this process, the strontium aluminate is formed in a similar way to the solid-state reaction method. X-ray powder diffraction analysis confirms that the monoclinic SrAl2O4 phase is present in the coating. Optical properties of the obtained coating were analyzed with luminescence methods classically used for studies of luminophores. The performance of the coating was compared with commercially available strontium aluminate powder. The proposed method of coating synthesis may be of value for the development of energy-efficient and long-lasting automotive and public safety infrastructure. ; European Regional Development Fund 1.1.1.1/16/A/182; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²