Suchergebnisse

The authors acknowledge the financial support from the Spanish Ministry of Science and Innovation (PID2019-105960RB-C22), the University of Alicante (Project GRE18-01A), the Generalitat Valenciana (Projects PROMETEO/2018/076 and GV2020-075, PhD grant GRISOLIAP/2017/177 and contract APOSTD/2019/030), the Junta de Andalucia (Project P18-RTJ-2974) and the UE (FEDER funding). ; A new method to synthesize integral carbon monoliths with a controlled channel morphology has been developed in this work by combining 3D-printing technology and sol–gel polymerization. By this method, robust and consistent carbon monoliths were obtained with a perfect replica of the channel architecture at a microscale range. As a proof of concept, a carbon monolith with tortuous channels that split and join successively along the monolith length has been designed, fabricated and tested as a CuO/CeO2 support for the preferential oxidation of CO in the presence of H2 (CO-PrOx), which is a topic of ongoing research for H2 purification in fuel cells. The behavior of this novel carbon monolith catalyst has been compared with that of a counterpart catalyst prepared with a conventional honeycomb design. Results shown that the wide macroporosity of the carbon network favors the anchoring and dispersion of the active phase both in the channel surface and the carbon network. The channel architecture affects the gas diffusion both through the channel and the carbon network and consequently, affects the active phase accessibility and activity. T50 (the temperature to achieve 50% CO conversion) decreases by almost 13 °C at 240 mL min−1 in the carbon monolith with tortuous channels (T50 = 79.7 °C) compared to the honeycomb monolith (T50 = 93.1 °C). The turbulent path created by the tortuous channels favours the active phase–gas contact and even the gas diffusion inside the macropores of the carbon skeleton improving the catalytic performance of the active phase compared to that by the conventional honeycomb design. Thus, this work demonstrates the potential of 3D printing to improve the catalytic supports currently available. ; Spanish Government PID2019-105960RB-C22 ; University of Alicante GRE18-01A ; Generalitat Valenciana ; European Commission ; General Electric PROMETEO/2018/076 GV2020-075 GRISOLIAP/2017/177 APOSTD/2019/030 ; Junta de Andalucia P18-RTJ-2974 ; UE (FEDER funding)

The preparation and use of Guefoams as heterogeneous catalyst is reported. The Guefoam catalyst consists of an open-pore Al-Si foam that accommodates a freely mobile guest phase (Ni/CeO2/Al2O3 particles) in its cavities, with neither a physical nor a chemical matrix-guest bond. A eutectic Al-12Si alloy was used as a low-melting matrix precursor to prevent thermal sintering of the active phase during liquid metal infiltration. CO2 methanation was chosen as the reaction test. The activity and CH4 selectivity (close to 100%) achieved with the Guefoam catalyst were similar to those obtained with a packed bed of the same active phase particles, but with the advantages of a structured reactor such as robustness and ease of handling. The thermal conductivity of the Guefoam catalyst is significantly improved with regard to the packed bed of active phase particles, which reduces the temperature gradients in the catalytic reactor, as demonstrated by computational fluid dynamic modelling. Since the permeability of the Guefoam catalyst is 2.7 times that of the packed bed, the pressure drop caused by the passage of a fluid through the novel material is reduced, resulting in a significantly higher catalytic performance index than the packed bed. ; Financial support from the Spanish Agencia Estatal de Investigación (AEI), the Spanish Ministry of Science and Innovation and the European Union (FEDER and NextGenerationEU funds) [projects MAT2016-77742-C2-2-P, PDC2021-121617-C21 and CTQ2015-67597-C2-2-R] and the Conselleria d'Innovació, Universitats, Ciència, i Societat Digital of the Generalitat Valenciana [projects GVA-COVID19/2021/097 and PROMETEO/2018/076, PhD grant of C.Y. Chaparro GRISOLIAP/2017/177 and contract of E. Bailón APOSTD/2019/030]. L.P. Maiorano also acknowledges the financial support from the University of Alicante through grant "Programa Propio para el fomento de la I+D+I del Vicerrectorado de Investigación y Transferencia de Conocimiento" (UAFPU2019-33).