Suchergebnisse

Abstract
Indoor air quality is particularly important for children since they spend more than 90% of their time inside. If outdoor levels of hazardous hydrocarbons are principally traffic related, indoor levels also depend on a variety of sources such as heating and cooking systems, stored products and human behavior (e.g. smoking, cleaning). In this context, within the ENVIRONAGE cohort, was investigated the relationship between SPMA urinary concentration in 214 children (4 to 6-year-old), and indoor sources of air pollution like heating and cooking methods (gas based vs electric) and traffic related air pollution (focusing on NO2 and black carbon). The SPMA urinary concentration was determined developing a high-sensitive UPLC-MS/MS method (LOQ: 0.05 ng/mL). Parents of the children were asked, throughout questionnaire, information about sources of indoor air pollution, such as wood-burning stove, fireplace and gas-based methods of heating or as energy source for the cooking stove and their frequency of using. Interpolation techniques was used to model the regional background levels of NO2 and black carbon for each child's residential address. The use of gas based cooking methods in the residential home of the child was associated with a 74% increase in the mean SPMA concentration of the child (95% Cl: 1.07 to 2.83), correcting for sex, age, BMI, waist circumference, passive smoking, education level of the parents, and time of the day. Consequently, this finding indicates that urinary SPMA can be used as biomarker for looking at indoor determinants of hazard hydrocarbons exposure.

Abstract
The territory of Muanda, on the Atlantic coastline of the DR Congo, is an area of off-shore and on-shore oil extraction. Following concerns of the local population about the possible environmental and health consequences of these activities, a pilot study was performed in December 2015 to assess, among other issues, the exposure of residents of various relevant locations to oil-derived chemicals. We measured metabolites of benzene (t,t-Muconic Acid, MA, and S-Phenylmercapturic acid, S-PMA) by LC-MS and 8-hydroxy-2'-deoxyguanosine (8-OHdG, as an indicator of DNA damage) by ELISA, in urine spot samples of 53 volunteers (34 adults, 19 children, recruited by convenience sampling) living within areas of oil extraction with flaring (n=27), in an area where petroleum products were handled (n=14), and in a control area in the Mangroves National Park (n=12). Concentrations of both MA and S-PMA were increased among residents of the oil extraction areas (0.23±0.05 mg/L, 1.04±0.30 µg/L, respectively) and petroleum products area (0.32±0.08 mg/L, 1.74±0.63 µg/L, respectively) compared with controls (0.06±0.01 mg/L, 0.40±0.13 µg/L, respectively). Concentrations of of MA and S-PMA correlated with levels of 8-OHdG (RSpearman = 0.37, p<0.01). Our biomonitoring study revealed a low degree of benzene exposure among residents living in the oil extraction and petroleum handling areas compared to a control area. Although the levels of benzene metabolites were low, the positive correlation with 8-OHdG possibly indicates that pollution by hydrocarbons induced oxidative damage in this study population.

Abstract
Diisocyanates are a group of chemicals that are widely used in occupational settings. They are known to induce various health effects, including skin- and respiratory tract sensitization resulting in allergic dermatitis and asthma. Exposure to diisocyanates has been studied in the past decades by using different types of biomonitoring markers and matrices. The aim of this review as part of the HBM4EU project was to assess: (i) which biomarkers and matrices have been used for biomonitoring diisocyanates and what are their strengths and limitations; (ii) what are (current) biomonitoring levels of the major diisocyanates (and metabolites) in workers; and (iii) to characterize potential research gaps. For this purpose we conducted a systematic literature search for the time period 2000–end 2018, thereby focussing on three types of diisocyanates which account for the vast majority of the total isocyanate market volume: hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), and 4,4′-methylenediphenyl diisocyanate (MDI). A total of 28 publications were identified which fulfilled the review inclusion criteria. The majority of these studies (93%) investigated the corresponding diamines in either urine or plasma, but adducts have also been investigated by several research groups. Studies on HDI were mostly in the motor vehicle repair industry [with urinary hexamethylene diamine result ranging from 0.03 to 146.5 µmol mol−1 creatinine]. For TDI, there is mostly data on foam production [results for urinary toluene diamine ranging from ~0.01 to 97 µmol mol−1 creatinine] whereas the available MDI data are mainly from the polyurethane industry (results for methylenediphenyl diamine range from 0.01 to 32.7 µmol mol−1 creatinine). About half of the studies published were prior to 2010 hence might not reflect current workplace exposure. There is large variability within and between studies and across sectors which could be potentially explained by several factors including worker or workplace variability, short half-lives of biomarkers, and differences in sampling strategies and analytical techniques. We identified several research gaps which could further be taken into account when studying diisocyanates biomonitoring levels: (i) the development of specific biomarkers is promising (e.g. to study oligomers of HDI which have been largely neglected to date) but needs more research before they can be widely applied, (ii) since analytical methods differ between studies a more uniform approach would make comparisons between studies easier, and (iii) dermal absorption seems a possible exposure route and needs to be further investigated. The use of MDI, TDI, and HDI has been recently proposed to be restricted in the European Union unless specific conditions for workers' training and risk management measures apply. This review has highlighted the need for a harmonized approach to establishing a baseline against which the success of the restriction can be evaluated.

Introduction: Phthalates, a group of ubiquitous industrial chemicals, have been widely used in occupational settings, mainly as plasticizers in a variety of applications. Occupational exposure to different phthalates has been studied in several occupational settings using human biomonitoring (HBM). Aim: To provide a comprehensive review of the available literature on occupational exposure to phthalates assessed using HBM and to determine future data needs on the topic as part of the HBM4EU project. Methods: A systematic search was carried out in the databases of Pubmed, Scopus, and Web of Science for articles published between 2000 and September 4, 2019 using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A total of 22 studies on the occupational HBM of phthalates was considered suitable for review. Results and discussion: Among the reviewed studies, 19 (86%) focused on DEHP, an old phthalate that is now subject to authorization and planned to be restricted in the EU. Concentrations of MEHHP, one of its metabolites, varied up to 13-fold between studies and across sectors when comparing extreme geometric means, ranging from 11.6 (similar to the general populations) to 151 μg/g creatinine. Only 2 studies focused on newer phthalates such as DiNP and DPHP. Concerning the geographical distribution, 10 studies were performed in Europe (including 6 in Slovakia), 8 in Asia, and 4 in North America, but this distribution is not a good reflection of phthalate production and usage levels worldwide. Most HBM studies were performed in the context of PVC product manufacturing. Future studies should focus on: i) a more uniform approach to sampling timing to facilitate comparisons between studies; ii) newer phthalates; and iii) old phthalates in waste management or recycling. Conclusion: Our findings highlight the lack of recent occupational HBM studies on both old and new phthalate exposure in European countries and the need for a harmonized approach. Considering the important policy actions taken in Europe regarding phthalates, it seems relevant to evaluate the impact of these actions on exposure levels and health risks for workers. ; publishersversion ; published

This article belongs to the Special Issue 2nd Edition: Human Biomonitoring of Environmental and Occupational Exposures ; Study Protocol ; Workers involved in the processing of electronic waste (e-waste) are potentially exposed to toxic chemicals. If exposure occurs, this may result in uptake and potential adverse health effects. Thus, exposure surveillance is an important requirement for health risk management and prevention of occupational disease. Human biomonitoring by measurement of specific biomarkers in body fluids is considered as an effective method of exposure surveillance. The aim of this study is to investigate the internal exposure of workers processing e-waste using a human biomonitoring approach, which will stimulate improved work practices and contribute to raising awareness of potential hazards. This exploratory study in occupational exposures in e-waste processing is part of the European Human Biomonitoring Initiative (HBM4EU). Here we present a study protocol using a cross sectional survey design to study worker's exposures and compare these to the exposure of subjects preferably employed in the same company but with no known exposure to industrial recycling of e-waste. The present study protocol will be applied in six to eight European countries to ensure standardised data collection. The target population size is 300 exposed and 150 controls. Biomarkers of exposure for the following chemicals will be used: chromium, cadmium and lead in blood and urine; brominated flame retardants and polychlorobiphenyls in blood; mercury, organophosphate flame retardants and phthalates in urine, and chromium, cadmium, lead and mercury in hair. In addition, the following effect biomarkers will be studied: micronuclei, epigenetic, oxidative stress, inflammatory markers and telomere length in blood and metabolomics in urine. Occupational hygiene sampling methods (airborne and settled dust, silicon wristbands and handwipes) and contextual information will be collected to facilitate the interpretation of the biomarker results and discuss exposure mitigating interventions to further reduce exposures if needed. This study protocol can be adapted to future European-wide occupational studies. ; This work has received external funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 733032 and received co-funding from the author's organizations and/or Ministries. ; info:eu-repo/semantics/publishedVersion

Funding Information: Funding: This research was conducted under the HBM4EU project and was funded by European Union's Horizon 2020 research and innovation program under grant agreement no. 733032 and received co-funding from the author's organizations and/or Ministries. Luxembourg entered the study at a later stage and thus financed the study at its own means. Publisher Copyright: © 2022 by the author. Licensee MDPI, Basel, Switzerland. ; Work-related exposures in industrial processing of chromate (chrome plating, surface treatment and welding) raise concern regarding the health risk of hexavalent chromium (Cr(VI)). In this study, performed under the HBM4EU project, we focused on better understanding the determinants of exposure and recognising how risk management measures (RMMs) contribute to a reduction in exposure. HBM and occupational hygiene data were collected from 399 workers and 203 controls recruited in nine European countries. Urinary total chromium (U-Cr), personal inhalable and respirable dust of Cr and Cr(VI) and Cr from hand wipes were collected. Data on the RMMs were collected by questionnaires. We studied the association between different exposure parameters and the use of RMMs. The relationship between exposure by inhalation and U-Cr in different worker groups was analysed using regression analysis and found a strong association. Automatisation of Cr electroplating dipping explained lower exposure levels in platers. The use of personal protective equipment resulted in lower U-Cr levels in welding, bath plating and painting. An effect of wearing gloves was observed in machining. An effect of local exhaust ventilation and training was observed in welding. Regression analyses showed that in platers, exposure to air level of 5 µg/m3 corresponds to U-Cr level of 7 µg/g creatinine. In welders, the same inhalation exposure resulted in lower U-Cr levels reflecting toxicokinetic differences of different chromium species. ; publishersversion ; published

Multicenter Study ; The EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. As part of HBM4EU, we presented a protocol for a multicentre study to characterize occupational exposure to hexavalent chromium (Cr(VI)) in nine European countries (HBM4EU chromates study). This study intended to collect data on current occupational exposure and to test new indicators for chromium (Cr) biomonitoring (Cr(VI) in exhaled breath condensate and Cr in red blood cells), in addition to traditional urinary total Cr analyses. Also, data from occupational hygiene samples and biomarkers of early biological effects, including genetic and epigenetic effects, was obtained, complementing the biomonitoring information. Data collection and analysis was completed, with the project findings being made separately available. As HBM4EU prepares to embark on further European wide biomonitoring studies, we considered it important to reflect on the experiences gained through our harmonised approach. Several practical aspects are highlighted for improvement in future studies, e.g., more thorough/earlier training on the implementation of standard operating procedures for field researchers, training on the use of the data entry template, as well as improved company communications. The HBM4EU chromates study team considered that the study had successfully demonstrated the feasibility of conducting a harmonised multicentre investigation able to achieve the research aims and objectives. This was largely attributable to the engaged multidisciplinary network, committed to deliver clearly understood goals. Such networks take time and investment to develop, but are priceless in terms of their ability to deliver and facilitate knowledge sharing and collaboration. ; Highlights: Feasibility of conducting harmonised Pan-European biomonitoring study on occupational exposure demonstrated; Developing a successful network and implementation of systematic methodology takes significant dedication from all involved; Methodological improvements were identified which will benefit future large-scale occupational biomonitoring campaigns; Developed multicentre network allows and promotes further opportunities for future research, knowledge sharing and collaboration; Data produced supports science to policy interface in the scope of REACH and occupational safety and health regulations. ; This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. ; info:eu-repo/semantics/publishedVersion

Recycling of electric and electronic waste products (e-waste) which amounted to more than 50 million metric tonnes per year worldwide is a massive and global operation. Unfortunately, an estimated 70-80% of this waste has not been properly managed because the waste went from developed to low-income countries to be dumped into landfills or informally recycled. Such recycling has been carried out either directly on landfill sites or in small, often family-run recycling shops without much regulations or oversights. The process traditionally involved manual dismantling, cleaning with hazardous solvents, burning and melting on open fires, etc., which would generate a variety of toxic substances and exposure/hazards to applicators, family members, proximate residents and the environment. The situation clearly calls for global responsibility to reduce the impact on human health and the environment, especially in developing countries where poor residents have been shouldering the hazardous burden. On the other hand, formal e-waste recycling has been mainly conducted in small scales in industrialised countries. Whether the latter process would impose less risk to populations and environment has not been determined yet. Therefore, the main objectives of this review are: 1. to address current trends and emerging threats of not only informal but also formal e-waste management practices, and 2. to propose adequate measures and interventions. A major recommendation is to conduct independent surveillance of compliance with e-waste trading and processing according to the Basel Ban Amendment. The recycling industry needs to be carefully evaluated by joint effort from international agencies, producing industries and other stakeholders to develop better processes. Subsequent transition to more sustainable and equitable e-waste management solutions should result in more effective use of natural resources, and in prevention of adverse effects on health and the environment. ; Highlights: Most e-waste is informally and inequitably recycled in developing countries; Informal recycling is reported to damage human health and the environment; The currently practised e-waste management system is inequitable and unsustainable; Developing formal and safe e-waste management should be a global priority. ; This work was supported by the Diagnosis, Monitoring and Prevention of Exposure-Related Noncommunicable Diseases (DiMoPEx) COST Action project (CA15129) and its Final Action Dissemination Grant from the European Union ; info:eu-repo/semantics/publishedVersion

The EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. Within its remit, the project is gathering new, policy relevant, EU-wide data on occupational exposure to relevant priority chemicals and developing new approaches for occupational biomonitoring. In this manuscript, the hexavalent chromium [Cr(VI)] study design is presented as the first example of this HBM4EU approach. This study involves eight European countries and plans to recruit 400 workers performing Cr(VI) surface treatment e.g. electroplating or stainless steel welding activities. The aim is to collect new data on current occupational exposure to Cr(VI) in Europe and to test new methods for Cr biomonitoring, specifically the analysis of Cr(VI) in exhaled breath condensate (EBC) and Cr in red blood cells (RBC) in addition to traditional urinary total Cr analyses. Furthermore, exposure data will be complemented with early biological effects data, including genetic and epigenetic effects. Personal air samples and wipe samples are collected in parallel to help informing the biomonitoring results. We present standard operational procedures (SOPs) to support the harmonized methodologies for the collection of occupational hygiene and HBM samples in different countries. ; This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. ; Sí

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals. ; This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. Luxembourg entered the study at a later stage and thus financed the study at its own means. ; Sí

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals. ; This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. ; info:eu-repo/semantics/publishedVersion