Suchergebnisse

[EN] This paper aimed to improve the electrochemical activity of a pitch-derived open-pore graphite foam (GF) by an electrochemical coating of reduced graphene oxide (RGO) and platinum particles without significantly affecting its 3D-structure. RGO was synthesized using cyclic voltammetry (CV) from a 3 g L(-1)GO and 0.1 M LiClO(4)solution. For the electrodeposition of Pt particles, an alternating current method based on electrochemical impedance spectroscopy (EIS) was used. A sinusoidal voltage from a fixed potential Ei was varied following a selected amplitude (Delta E-ac= +/- 0.35 V) in a frequency range of 8 Hz = f(i) = 10Hz, wherei= 500. This method proved its efficiency when compared to the traditional CV by obtaining more highly electroactive coatings in less synthesis time. For samples' characterization, physical measures included permeability, pressure drop, and nitrogen adsorption isotherms. The electrochemical characterization was performed by CV. The surface morphology and chemical composition were examined using field emission electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), respectively. RGO improved the electron transfer rate constant of GF, and a more homogeneous coating distribution of reduced size Pt particles was obtained. ; This research was funded by the Spanish Agencia Estatal de Investigación (AEI) and the European Union (FEDER funds) contracts (MAT2016-77742-C2-1-P, MAT2016-77742-C2-2-P). Financial support of Network E3TECH (CTQ2017-90659-REDT) is acknowledged. ; Fernández Sáez, J.; Bonastre Cano, JA.; Molina, JM.; Cases, F. (2020). Enhancement of the Electrochemical Properties of an Open-Pore Graphite Foam with Electrochemically Reduced Graphene Oxide and Alternating Current Dispersed Platinum Particles. Coatings. 10(6):1-12. https://doi.org/10.3390/coatings10060551 ; S ; 1 ; 12 ; 10 ; 6 ; Prieto, R., Louis, E., & Molina, J. M. (2012). Fabrication of mesophase pitch-derived open-pore carbon foams by replication processing. Carbon, 50(5), 1904-1912. ...

[EN] This work describes a two-step procedure for the electrochemical coating of reduced graphene oxide (RGO) and polypyrrole anthraquinone sulfonate (PPyAQS) onto an activated carbon cloth (ACC) by cyclic voltammetry (CV). The textile samples were characterized by CV, electrochemical impedance spectroscopy (EIS) and galvanostatic charge-discharge measurements using a sandwich-type (electrode/separator/electrode) cell designed to operate in three or two-electrode configurations. The presence of RGO onto the ACC surface optimized the electrosynthesis of PPyAQS and reinforced the stability of the polymer with the number of charge/discharge cycles. A retention capacity of 90% after 100 charge-discharge cycles together with an energy density of 7.8¿×¿10¿4¿W¿h¿cm¿2 at a power density of 1.8¿×¿10¿3¿W¿cm¿2 were obtained for the ACC/RGO/PPyAQS sample. The analyses by field emission scanning electron microscopy (FESEM) showed the RGO veils-like and PPyAQS glomerular structures covering the ACC-fibers. The Fourier transform infrared spectroscopy (FTIR) analyses not only detected the presence of PPy and AQS, but also, the changes in the molecular structure of PPyAQS, depending on its oxidation state, as consequence of the redox reactions occurred in the charge/discharge processes in the two-electrode cell. ; The authors wish to acknowledge to Chemviron Carbon who kindly donated the ZORFLEX® activated carbon fabric. The authors wish to thank the Spanish Agencia Estatal de Investigación de Economía (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P). Tim Vickers is gratefully acknowledged for help with the English revision. Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for help with FESEM characterization. ; Fernández Sáez, J.; Bonastre Cano, JA.; Molina Puerto, J.; Cases, F. (2018). Electrochemical study on an activated carbon cloth modified by cyclic voltammetry with polypyrrole/anthraquinone sulfonate and reduced ...

This paper aimed to improve the electrochemical activity of a pitch-derived open-pore graphite foam (GF) by an electrochemical coating of reduced graphene oxide (RGO) and platinum particles without significantly affecting its 3D-structure. RGO was synthesized using cyclic voltammetry (CV) from a 3 g L−1 GO and 0.1 M LiClO4 solution. For the electrodeposition of Pt particles, an alternating current method based on electrochemical impedance spectroscopy (EIS) was used. A sinusoidal voltage from a fixed potential Ei was varied following a selected amplitude (ΔEac = ± 0.35 V) in a frequency range of 8 Hz ≤ fi ≤ 10Hz, where i = 500. This method proved its efficiency when compared to the traditional CV by obtaining more highly electroactive coatings in less synthesis time. For samples' characterization, physical measures included permeability, pressure drop, and nitrogen adsorption isotherms. The electrochemical characterization was performed by CV. The surface morphology and chemical composition were examined using field emission electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), respectively. RGO improved the electron transfer rate constant of GF, and a more homogeneous coating distribution of reduced size Pt particles was obtained. ; This research was funded by the Spanish Agencia Estatal de Investigación (AEI) and the European Union (FEDER funds) contracts (MAT2016-77742-C2-1-P, MAT2016-77742-C2-2-P).

Polyaniline coated conducting fabrics have been obtained by chemical oxidation of aniline by potassium peroxydisulfate on polyester fabrics. Two different acids have been employed to carry out the synthesis (HCl and H 2SO 4), obtaining the best results of conductivity with the latter one. The conducting fabrics have been characterized chemically by means of Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), energy dispersive X-Ray (EDX) and X-ray photoelectron spectroscopy (XPS). The morphology of the coatings has been observed by means of scanning electron microscopy (SEM). The conducting properties of the fabrics have been measured by means of electrochemical impedance spectroscopy (EIS). The electrochemical characterization has been carried out by means of cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The conducting fabrics have also shown electrochromic properties, changing its color from green yellowish at -1 V to dark green at +2 V. The durability of the coating has been evaluated by means of washing and rubbing fastness tests. © 2011 Elsevier Ltd. All rights reserved. ; Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contract CTM2010-18842-C02-02) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. ; Molina Puerto, J.; Esteves, M.; Fernández Sáez, J.; Bonastre Cano, JA.; Cases Iborra, FJ. (2011). Polyaniline coated conducting fabrics. Chemical and electrochemical characterization. European Polymer Journal. 47(10):2003-2015. https://doi.org/10.1016/j.eurpolymj.2011.07.021 ; S ; 2003 ; 2015 ; 47 ; 10

2003 2015 47 10 ; S ; Polyaniline coated conducting fabrics have been obtained by chemical oxidation of aniline by potassium peroxydisulfate on polyester fabrics. Two different acids have been employed to carry out the synthesis (HCl and H 2SO 4), obtaining the best results of conductivity with the latter one. The conducting fabrics have been characterized chemically by means of Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), energy dispersive X-Ray (EDX) and X-ray photoelectron spectroscopy (XPS). The morphology of the coatings has been observed by means of scanning electron microscopy (SEM). The conducting properties of the fabrics have been measured by means of electrochemical impedance spectroscopy (EIS). The electrochemical characterization has been carried out by means of cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The conducting fabrics have also shown electrochromic properties, changing its color from green yellowish at -1 V to dark green at +2 V. The durability of the coating has been evaluated by means of washing and rubbing fastness tests. © 2011 Elsevier Ltd. All rights reserved. Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contract CTM2010-18842-C02-02) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. Molina Puerto, J.; Esteves, M.; Fernández Sáez, J.; Bonastre Cano, JA.; Cases Iborra, FJ. (2011). Polyaniline coated conducting fabrics. Chemical and electrochemical characterization. European Polymer Journal. 47(10):2003-2015. https://doi.org/10.1016/j.eurpolymj.2011.07.021

The synthesis of reduced graphene oxide onto magnesium discs by electrochemical and chemical methods is presented in this work. The surface morphology and atomic composition were investigated using field emission scanning electron microscopy and energy dispersive X-ray spectroscopy. The corrosion rate of different samples was analyzed in physiological saline 0.9 wt % NaCl solution by potentiodynamic polarization, electrochemical impedance spectroscopy and scanning electrochemical microscopy. As a result of the different treatments, a progressive decrease in the corrosion rate of the magnesium disc in the corroding environment was obtained, reaching up to 80% of reduction for the chemically modified sample. ; The authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and European Union (FEDER funds) for the financial support (contracts MAT2016-77742-C2-1-P and MAT2016-77742-C2-2-P).

This work describes a two-step process for the electrochemical coating of reduced graphene oxide (RGO) and polyaniline (PANI) onto an activated carbon cloth (ACC) by cyclic voltammetry (CV). The fact that the two syntheses are carried out independently of each other, makes it possible to select the experimental conditions for each one and to study the electrochemical response of RGO, PANI, and PANI onto RGO (RGOPANI), separately. Thus, by modifying the potential limits of the aniline-polymerization reaction, it was possible to observe the influence of RGO and the maximum amount of PANI that the carbon cloth can receive in terms of proper electrochemical response. Electrochemical properties were characterized by CV, galvanostatic charge-discharge curves (using three or two-electrodes symmetric cell configurations) and electrochemical impedance spectroscopy (EIS). A maximum improvement of 25%, 56% and 61% over the initial specific capacitance of ACC (about 129 F g−1) were obtained for RGO, PANI and RGOPANI coatings, respectively. Good cycling stability retaining 83% of the initial capacitance, after 1000 cycles stability test, was obtained for RGOPANI sample. Promising results of energy and power densities were also achieved. In the analyses by Fourier transform infrared spectroscopy (FTIR), the PANI-bands could be clearly identified which is indicative of a significant presence of PANI. Field emission scanning electron microscopy (FESEM) showed the morphology of RGO, PANI and RGOPANI onto the ACC fibers. These analyses helped to explain the electrochemical results. ; The authors wish to acknowledge to Chemviron Carbon who kindly donated the ZORFLEX (R) activated carbon fabric. The authors wish to thank the Spanish Agenda Estatal de Investigacion (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P). Tim Vickers is gratefully acknowledged for help with the English revision. ; Fernández Sáez, J.; Bonastre Cano, JA.; Molina Puerto, J.; Del Río García, AI.; Cases Iborra, FJ. ...

The electrochemical characterization of two organic dyes (amaranth and procion orange MX-2R) has been performed on Pt electrodes and Pt electrodes coated with polyaniline and dispersed Pt. Electrodes with different Pt loads have been synthesized and characterized obtaining that a load of 300 ¿g cm -2 was the optimum one. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) was employed to observe the distribution and morphology of the Pt nanoparticles. The electroactivity of the electrodes has also been characterized by means of scanning electrochemical microscopy (SECM). The chemical characterization of Pt dispersed Pani coated Pt electrodes (Pt-Pani-Pt) was performed by means of X-ray photoelectron spectroscopy (XPS). The electrochemical characterization of the dyes has been performed by means of cyclic voltammetry. Voltammograms have shown that the presence of the dyes diminishes characteristic Pt oxidation and reduction peaks. However, redox processes due to the dyes, appeared in the voltammograms. The different species responsible of these redox processes were generated in the vicinity of the electrode and were not adsorbed on the electrode surface since after stirring, the different redox processes disappeared. Characterization with different scan rates showed that redox processes of both dyes were controlled by diffusion. © 2012 Elsevier B.V. ; Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship. ; Molina Puerto, J.; Fernández Sáez, J.; Del Río García, AI.; Bonastre Cano, JA.; Cases Iborra, FJ. (2012). Characterization of azo dyes on Pt and Pt/polyaniline/dispersed Pt ...

Polyaniline (Pani) has been electrochemically polymerized on conducting fabrics of polyester covered with polypyrrole/PW 12O 40 3-, obtaining a double conducting polymer layer. Electrochemical synthesis was performed by potentiostatic synthesis at 1 V. The chemical characterization of the material before and after Pani polymerization was performed by means of X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray (EDX) and Fourier transform infrared spectroscopy (FTIR). The morphology of the coatings was observed employing scanning electron microscopy (SEM). The electrochemical characterization was performed by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). It has been demonstrated that scan rate is an important parameter that influences the response obtained when characterizing conducting fabrics by CV. High scan rates do not allow the observation of redox peaks. However if lower scan rates are employed its apparition has been reported. The electrochemical deposit of polyaniline enhances the electroactivity of the material as it has been demonstrated by CV. SECM measurements showed local response with positive feedback (electroactive material) for the samples in open circuit conditions. XPS analysis also showed a higher doping level (N +/N), consistent with higher material electroactivity. © 2011 Elsevier B.V. ; Authors thank to the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (contract CTM2007-66570-C02-02 and CTM2010-18842-C02-02) and Universidad Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. j. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship. ; Molina Puerto, J.; Fernández Sáez, J.; Del Río García, AI.; Bonastre Cano, JA.; Cases Iborra, FJ. (2011). Electrochemical synthesis of polyaniline on conducting fabrics of polyester covered with ...

The electrochemical treatment of wastewaters from textile industry is a promising technique for substances which are resistant to biodegradation. This paper deals with the electrochemical decolourisation/degradation of synthetic solutions containing a reactive dye, C.I. Reactive Orange 4. Oxidation, reduction and oxido-reduction processes were evaluated using Ti/SnO 2-Sb-Pt and stainless steel electrodes as anode and cathode, respectively. Electrolyses were performed at galvanostatic conditions in a filter press reactor. Decolourisation and degradation were followed by means of total organic carbon (TOC), chemical oxygen demand (COD) measurements and high performance liquid chromatography (HPLC). A higher mineralisation rate for oxidation was found whilst oxido-reduction process gave more oxidised species. The kinetics of decolourisation was of pseudo-first order in all cases. The reduction process was the slowest process to decolourise. Gas chromatography-mass spectrometry (GC-MS) was employed to investigate the main intermediate compounds, confirming the presence of 2-amino-1, 5-naphthalenedisulphonic acid (2A15NDS) in solution. When this compound was generated, it was gradually degraded during the oxidation and oxido-reduction processes indicating the feasibility and durability of Ti/SnO 2-Sb-Pt electrodes. However, during the electrochemical reduction process, this compound was continuously generated but it was not degraded. © 2011 Elsevier B.V. ; The authors would like to acknowledge the Spanish Ministry of Science and Innovation (MICINN) and European Union (FEDER funds) for the financial support (CTM2007-66570-C02-02 and CTM2010-18842-C02-02). A. I. del Rio thanks the Spanish Ministry of Science and Innovation (MICINN) for her F.P.I. grant awarding. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for his FPI grant awarding. ; Del Río García, AI.; Fernández Sáez, J.; Molina Puerto, J.; Bonastre Cano, JA.; Cases Iborra, FJ. (2011). Electrochemical treatment of a synthetic ...

A study of the stability of conducting fabrics of polyester (PES) coated with polypyrrole/PW12O403¿ (organic/inorganic hybrid material) in different pH solutions (1, 7, 13) has been done. Washing tests were also done in views of its possible application in electronic textiles such as antistatic clothing. X-ray photoelectron spectroscopy (XPS) studies have been done to quantify the amount of counter ion that remains in the polymer matrix and determine the doping ratio (N+/N) after the different tests. Scanning electron microscopy (SEM) was also used to observe morphological differences after the different tests. Surface resistivity changes were measured by means of electrochemical impedance spectroscopy (EIS). Scanning electrochemical microscopy (SECM) was employed to measure changes in electroactivity after the different tests. Higher pHs caused a decrease of the doping ratio (N+/N), the loss of part of the counter ions and the decrease of its conducting and electrocatalytic properties. The stability in acid media and neutral media and after the washing test was good. Only at pH 13 the loss of the counter ion was widespread and there was a decrease of its conducting and catalytic properties; although the fabrics continued acting mainly as a conducting material. ; Authors thank the Spanish Ministerio de Ciencia y Tecnologia, European Union Funds (FEDER) (contract CTM2007-66570-C02-02) and Universitat Politecnica de Valencia (Programa de apoyo a la investigacion y desarrollo de la UPV (PAID-05-08)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship. ; Molina Puerto, J.; Fernández Sáez, J.; Del Río García, AI.; Bonastre Cano, JA.; Cases Iborra, FJ. (2011). Chemical, electrical and electrochemical characterization of hybrid organic/inorganic polypyrrole/PW12O403- coating deposited on polyester fabrics. Applied Surface Science. 257:10056-10064. ...

The electrochemical behavior of different carbon-based electrodes with and without nanoparticles of platinum electrochemically dispersed on their surface has been studied. Among others, reduced graphene oxide based electrodes was used to determine the best conditions for the decolorization/degradation of the reactive dye C.I. Reactive Orange 4 in sulfuric medium. Firstly, the electrochemical behavior was evaluated by cyclic voltammetry. Secondly, different electrolyses were performed using two cell configurations: cell with anodic and cathodic compartments separated (divided configuration) and without any separation (undivided configuration). The best results were obtained when reduced graphene oxide based anodes were used. The degree of decolorization was monitored by spectroscopic methods and high performance liquid chromatography. It was found that all of them followed pseudofirst order kinetics. When reduced graphene oxide-based electrodes coated with dispersed platinum by alternate current methods electrodes were used, the lowest energy consumption and the higher decolorization kinetics rate were obtained. Scanning Electronic Microscopy was used to observe the morphological surface differences. ; The authors wish to thank the Spanish Agencia Estatal de Investigacion (AEI) and European Union (FEDER funds) for the financial support (contract MAT2016-77742-C2-1-P). A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for her FPI fellowship. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Programa VALi+D Postdoctoral Fellowship (APOSTD/2013/056). C. Garcia is grateful to the Conselleria d'Educacio, Formacio I Ocupacio (Generalitat Valenciana) for her Geronimo Forteza fellowship. The authors wish to acknowledge to Chemviron Carbon who kindly donated the 265 ZORFLEX (R) activated carbon fabric. ; Del Río García, AI.; García-Albert, C.; Molina Puerto, J.; Fernández Sáez, J.; Bonastre Cano, JA.; Cases Iborra, FJ. (2017). On the behavior ...