Suchergebnisse

To manage greenhouse gas emissions, directives on renewable energy usage have been developed by the European Commission with the objective to reduce overall emissions by 40% by 2030 which presents a significant potential for renewable energy sources. At the same time, it is a challenge for these energy technologies which can only be solved by integrated solutions. Carbon capture and storage combined with geothermal energy could serve as a novel approach to reduce CO2 emissions and at the same time facilitate some of the negative impacts associated with fossil fuel-based power plants. This study focuses on the technical and economic feasibility of combining these technologies based on a published model, data and market research. In the European Union, Germany is the most energy intensive country, and it also has an untapped potential for geothermal energy in the northern as well as the western regions. The CO2 plume geothermal system using supercritical carbon dioxide as the working fluid can be utilized in natural high porosity (10&ndash ; 20%) and permeability (2.5 × ; 10&minus ; 14&ndash ; 8.4 × ; 10&minus ; 16 m2) reservoirs with temperatures as low as 65.8 ° ; C. The feasibility of the project was assessed based on market conditions and policy support in Germany as well as the geologic background of sandstone reservoirs near industrialized areas (Dortmund, Frankfurt) and the possibility of carbon capture integration and CO2 injection. The levelized cost of electricity for a base case results in &euro ; 0.060/kWh. Optimal system type was assessed in a system optimization model. The project has a potential to supply 6600/12000 households with clean energy (electricity/heat) and sequester carbon dioxide at the same time. A trading scheme for carbon dioxide further expands potential opportunities.

Under the Biofuels Obligation Scheme in Ireland, the biofuels penetration rate target for 2013 was set at 6% by volume from a previous 4% from 2010. In 2012 the fuel blend reached 3%, with approximately 70 million L of biodiesel and 56 million L of ethanol blended with diesel and gasoline, respectively. Up to and including April 2013, the current blend rate in Ireland for biodiesel was 2.3% and for bioethanol was 3.7% which equates to approximately 37.5 million L of biofuel for the first four months of 2013. The target of 10% by 2020 remains, which equates to approximately 420 million L yr−1. Achieving the biofuels target would require 345 ktoe by 2020 (14,400 TJ). Utilizing the indigenous biofuels in Ireland such as tallow, used cooking oil and oil seed rape leaves a shortfall of approximately 12,000 TJ or 350 million L (achieving only 17% of the 10% target) that must be either be imported or met by other renewables. Other solutions seem to suggest that microalgae (for biodiesel) and macroalgae (for bioethanol) could meet this shortfall for indigenous Irish production. This paper aims to review the characteristics of algae for biofuel production based on oil yields, cultivation, harvesting, processing and finally in terms of the European Union (EU) biofuels sustainability criteria, where, up to 2017, a 35% greenhouse gas (GHG) emissions reduction is required compared to fossil fuels. From 2017 onwards, a 50% GHG reduction is required for existing installations and from 2018, a 60% reduction for new installations is required.

To manage greenhouse gas emissions, directives on renewable energy usage have been developed by the European Commission with the objective to reduce overall emissions by 40% by 2030 which presents a significant potential for renewable energy sources. At the same time, it is a challenge for these energy technologies which can only be solved by integrated solutions. Carbon capture and storage combined with geothermal energy could serve as a novel approach to reduce CO2 emissions and at the same time facilitate some of the negative impacts associated with fossil fuel-based power plants. This study focuses on the technical and economic feasibility of combining these technologies based on a published model, data and market research. In the European Union, Germany is the most energy intensive country, and it also has an untapped potential for geothermal energy in the northern as well as the western regions. The CO2 plume geothermal system using supercritical carbon dioxide as the working fluid can be utilized in natural high porosity (10–20%) and permeability (2.5 × 10−14–8.4 × 10−16 m2) reservoirs with temperatures as low as 65.8 ◦C. The feasibility of the project was assessed based on market conditions and policy support in Germany as well as the geologic background of sandstone reservoirs near industrialized areas (Dortmund, Frankfurt) and the possibility of carbon capture integration and CO2 injection. The levelized cost of electricity for a base case results in € 0.060/kWh. Optimal system type was assessed in a system optimization model. The project has a potential to supply 6600/12000 households with clean energy (electricity/heat) and sequester carbon dioxide at the same time. A trading scheme for carbon dioxide further expands potential opportunities.

PrePrint copy of "Alternative seagrass wrack management practices in the circular bioeconomy framework: A life cycle assessment approach" Abstract: Despite providing important ecological functions, seagrass accumulation causes environmental and economic issues, including eutrophication and tourism reduction. Nowadays, seagrass wrack is commonly removed from the beaches and landfilled, which is considered the least desirable practice according to the European Union (EU) Waste Framework Directive. In this study, different management strategies for seagrass valorisation, including anaerobic digestion (AD), composting and ecological restoration, were considered using a life cycle assessment (LCA) perspective. The aim of the work was to evaluate more ecological and economic alternatives to landfill and to provide a robust evaluation method for public and private companies. An economic assessment was subsequently conducted, considering both direct and indirect impacts with a life cycle costing (LCC) approach.