Suchergebnisse

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legislation (CLE); (2) an optimistic case of the maximum emissions reductions currently technologically feasible (MFR); and (3) the contrasting pessimistic IPCC SRES A2 scenario. An extensive evaluation of the present-day deposition using nearly all information on wet deposition available worldwide shows a good agreement with observations in Europe and North America, where 60–70% of the model-calculated wet deposition rates agree to within ±50% with quality-controlled measurements. Models systematically overestimate NHx deposition in South Asia, and underestimate NOy deposition in East Asia. We show that there are substantial differences among models for the removal mechanisms of NOy, NHx, and SOx, leading to ±1 σ variance in total deposition fluxes of about 30% in the anthropogenic emissions regions, and up to a factor of 2 outside. In all cases the mean model constructed from the ensemble calculations is among the best when comparing to measurements. Currently, 36–51% of all NOy, NHx, and SOx is deposited over the ocean, and 50–80% of the fraction of deposition on land falls on natural (nonagricultural) vegetation. Currently, 11% of the world's natural vegetation receives nitrogen deposition in excess of the "critical load" threshold of 1000 mg(N) m−2 yr−1. The regions most affected are the United States (20% of vegetation), western Europe (30%), eastern Europe (80%), South Asia (60%), East Asia (40%), southeast Asia (30%), and Japan (50%). Future deposition fluxes are mainly driven by changes in emissions, and less importantly by changes in atmospheric chemistry and climate. The global fraction of vegetation exposed to nitrogen loads in excess of 1000 mg(N) m−2 yr−1 increases globally to 17% for CLE and 25% for A2. In MFR, the reductions ...

International audience ; We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legislation (CLE); (2) an optimistic case of the maximum emissions reductions currently technologically feasible (MFR); and (3) the contrasting pessimistic IPCC SRES A2 scenario. An extensive evaluation of the present-day deposition using nearly all information on wet deposition available worldwide shows a good agreement with observations in Europe and North America, where 60–70% of the model-calculated wet deposition rates agree to within ±50% with quality-controlled measurements. Models systematically overestimate NHx deposition in South Asia, and underestimate NOy deposition in East Asia. We show that there are substantial differences among models for the removal mechanisms of NOy, NHx, and SOx, leading to ±1 σ variance in total deposition fluxes of about 30% in the anthropogenic emissions regions, and up to a factor of 2 outside. In all cases the mean model constructed from the ensemble calculations is among the best when comparing to measurements. Currently, 36–51% of all NOy, NHx, and SOx is deposited over the ocean, and 50–80% of the fraction of deposition on land falls on natural (nonagricultural) vegetation. Currently, 11% of the world's natural vegetation receives nitrogen deposition in excess of the "critical load" threshold of 1000 mg(N) m−2 yr−1. The regions most affected are the United States (20% of vegetation), western Europe (30%), eastern Europe (80%), South Asia (60%), East Asia (40%), southeast Asia (30%), and Japan (50%). Future deposition fluxes are mainly driven by changes in emissions, and less importantly by changes in atmospheric chemistry and climate. The global fraction of vegetation exposed to nitrogen loads in excess of 1000 mg(N) m−2 yr−1 increases globally to 17% for CLE and 25% for A2. In MFR, the reductions ...

International audience ; We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legislation (CLE); (2) an optimistic case of the maximum emissions reductions currently technologically feasible (MFR); and (3) the contrasting pessimistic IPCC SRES A2 scenario. An extensive evaluation of the present-day deposition using nearly all information on wet deposition available worldwide shows a good agreement with observations in Europe and North America, where 60–70% of the model-calculated wet deposition rates agree to within ±50% with quality-controlled measurements. Models systematically overestimate NHx deposition in South Asia, and underestimate NOy deposition in East Asia. We show that there are substantial differences among models for the removal mechanisms of NOy, NHx, and SOx, leading to ±1 σ variance in total deposition fluxes of about 30% in the anthropogenic emissions regions, and up to a factor of 2 outside. In all cases the mean model constructed from the ensemble calculations is among the best when comparing to measurements. Currently, 36–51% of all NOy, NHx, and SOx is deposited over the ocean, and 50–80% of the fraction of deposition on land falls on natural (nonagricultural) vegetation. Currently, 11% of the world's natural vegetation receives nitrogen deposition in excess of the "critical load" threshold of 1000 mg(N) m−2 yr−1. The regions most affected are the United States (20% of vegetation), western Europe (30%), eastern Europe (80%), South Asia (60%), East Asia (40%), southeast Asia (30%), and Japan (50%). Future deposition fluxes are mainly driven by changes in emissions, and less importantly by changes in atmospheric chemistry and climate. The global fraction of vegetation exposed to nitrogen loads in excess of 1000 mg(N) m−2 yr−1 increases globally to 17% for CLE and 25% for A2. In MFR, the reductions ...

International audience ; We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legislation (CLE); (2) an optimistic case of the maximum emissions reductions currently technologically feasible (MFR); and (3) the contrasting pessimistic IPCC SRES A2 scenario. An extensive evaluation of the present-day deposition using nearly all information on wet deposition available worldwide shows a good agreement with observations in Europe and North America, where 60–70% of the model-calculated wet deposition rates agree to within ±50% with quality-controlled measurements. Models systematically overestimate NHx deposition in South Asia, and underestimate NOy deposition in East Asia. We show that there are substantial differences among models for the removal mechanisms of NOy, NHx, and SOx, leading to ±1 σ variance in total deposition fluxes of about 30% in the anthropogenic emissions regions, and up to a factor of 2 outside. In all cases the mean model constructed from the ensemble calculations is among the best when comparing to measurements. Currently, 36–51% of all NOy, NHx, and SOx is deposited over the ocean, and 50–80% of the fraction of deposition on land falls on natural (nonagricultural) vegetation. Currently, 11% of the world's natural vegetation receives nitrogen deposition in excess of the "critical load" threshold of 1000 mg(N) m−2 yr−1. The regions most affected are the United States (20% of vegetation), western Europe (30%), eastern Europe (80%), South Asia (60%), East Asia (40%), southeast Asia (30%), and Japan (50%). Future deposition fluxes are mainly driven by changes in emissions, and less importantly by changes in atmospheric chemistry and climate. The global fraction of vegetation exposed to nitrogen loads in excess of 1000 mg(N) m−2 yr−1 increases globally to 17% for CLE and 25% for A2. In MFR, the reductions ...

International audience ; We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legislation (CLE); (2) an optimistic case of the maximum emissions reductions currently technologically feasible (MFR); and (3) the contrasting pessimistic IPCC SRES A2 scenario. An extensive evaluation of the present-day deposition using nearly all information on wet deposition available worldwide shows a good agreement with observations in Europe and North America, where 60–70% of the model-calculated wet deposition rates agree to within ±50% with quality-controlled measurements. Models systematically overestimate NHx deposition in South Asia, and underestimate NOy deposition in East Asia. We show that there are substantial differences among models for the removal mechanisms of NOy, NHx, and SOx, leading to ±1 σ variance in total deposition fluxes of about 30% in the anthropogenic emissions regions, and up to a factor of 2 outside. In all cases the mean model constructed from the ensemble calculations is among the best when comparing to measurements. Currently, 36–51% of all NOy, NHx, and SOx is deposited over the ocean, and 50–80% of the fraction of deposition on land falls on natural (nonagricultural) vegetation. Currently, 11% of the world's natural vegetation receives nitrogen deposition in excess of the "critical load" threshold of 1000 mg(N) m−2 yr−1. The regions most affected are the United States (20% of vegetation), western Europe (30%), eastern Europe (80%), South Asia (60%), East Asia (40%), southeast Asia (30%), and Japan (50%). Future deposition fluxes are mainly driven by changes in emissions, and less importantly by changes in atmospheric chemistry and climate. The global fraction of vegetation exposed to nitrogen loads in excess of 1000 mg(N) m−2 yr−1 increases globally to 17% for CLE and 25% for A2. In MFR, the reductions ...

International audience ; We use 23 atmospheric chemistry transport models to calculate current and future (2030) deposition of reactive nitrogen (NOy, NHx) and sulfate (SOx) to land and ocean surfaces. The models are driven by three emission scenarios: (1) current air quality legislation (CLE); (2) an optimistic case of the maximum emissions reductions currently technologically feasible (MFR); and (3) the contrasting pessimistic IPCC SRES A2 scenario. An extensive evaluation of the present-day deposition using nearly all information on wet deposition available worldwide shows a good agreement with observations in Europe and North America, where 60–70% of the model-calculated wet deposition rates agree to within ±50% with quality-controlled measurements. Models systematically overestimate NHx deposition in South Asia, and underestimate NOy deposition in East Asia. We show that there are substantial differences among models for the removal mechanisms of NOy, NHx, and SOx, leading to ±1 σ variance in total deposition fluxes of about 30% in the anthropogenic emissions regions, and up to a factor of 2 outside. In all cases the mean model constructed from the ensemble calculations is among the best when comparing to measurements. Currently, 36–51% of all NOy, NHx, and SOx is deposited over the ocean, and 50–80% of the fraction of deposition on land falls on natural (nonagricultural) vegetation. Currently, 11% of the world's natural vegetation receives nitrogen deposition in excess of the "critical load" threshold of 1000 mg(N) m−2 yr−1. The regions most affected are the United States (20% of vegetation), western Europe (30%), eastern Europe (80%), South Asia (60%), East Asia (40%), southeast Asia (30%), and Japan (50%). Future deposition fluxes are mainly driven by changes in emissions, and less importantly by changes in atmospheric chemistry and climate. The global fraction of vegetation exposed to nitrogen loads in excess of 1000 mg(N) m−2 yr−1 increases globally to 17% for CLE and 25% for A2. In MFR, the reductions ...