Suchergebnisse

S‐estimators of multivariate location and dispersion are favored for their robustness against outliers. The computations of the exact S‐estimators, however, are difficult, if not impossible. We consider S*‐estimators, a variant of the S‐estimators which is commonly computed in reality. It is shown under very general conditions that S*‐estimators are qualitatively robust with respect to a wide range of metrics, including Prohorov metric and a weak affine invariant metric based on Vapnik‐Cervonenkis sets. The result follows from a continuity result of the S*‐functionals and almost everywhere continuity result of the corresponding estimators in finite‐sample cases.

Current studies reveal that the sharing economy has faced new barriers and issues in its development context, such as trust and privacy issues. By integrating theories of sharing economy and service science, in our past work, we explored how to deal with the service issues of online car-hailing based on process chain network (PCN). We also explored services in the sharing economy on three different levels: personal behavior, platform service and government regulation. With service-dominant logic replacing product-dominant logic, we suggest that research in the sharing economy and e-commerce calls for further systematical application of important service science theories and should make use of emerging technologies to develop new research methods.

The construction industry is responsible for 50% of the solid waste generated worldwide. Governments around the world formulate legislation and regulations concerning recycling and re-using building materials, aiming to reduce waste and environmental impact. Researchers have also been developing strategies and models of waste management for construction and demolition of buildings. The application of Building Information Modeling (BIM) is an example of this. BIM is emergent technology commonly used to maximize the efficiency of design, construction and maintenance throughout the entire lifecycle. The uses of BIM on deconstruction or demolition are not common; especially the fixtures and fittings of buildings are not considered in BIM models. The development of BIM is based on two-dimensional drawings or sketches, which may not be accurately converted to 3D BIM models. In addition, previous researches mainly focused on construction waste management. There are few studies about the deconstruction waste management focusing on demolition. To fill this gap, this paper aims to develop a framework using a reconstructed 3D model with BIM, for the purpose of improving BIM accuracy and thus developing a deconstruction waste management system to improve demolition efficiency, effective recycling and cost savings. In particular, the developed as-built BIM will be used to identify and measure recyclable materials, as well as to develop a plan for the recycling process.

The construction industry is responsible for 50% of the solid waste generated worldwide. Governments around the world formulate legislation and regulations concerning recycling and re-using building materials, aiming to reduce waste and environmental impact. Researchers have also been developing strategies and models of waste management for construction and demolition of buildings. The application of Building Information Modeling (BIM) is an example of this. BIM is emergent technology commonly used to maximize the efficiency of design, construction and maintenance throughout the entire lifecycle. The uses of BIM on deconstruction or demolition are not common; especially the fixtures and fittings of buildings are not considered in BIM models. The development of BIM is based on two-dimensional drawings or sketches, which may not be accurately converted to 3D BIM models. In addition, previous researches mainly focused on construction waste management. There are few studies about the deconstruction waste management focusing on demolition. To fill this gap, this paper aims to develop a framework using a reconstructed 3D model with BIM, for the purpose of improving BIM accuracy and thus developing a deconstruction waste management system to improve demolition efficiency, effective recycling and cost savings. In particular, the developed as-built BIM will be used to identify and measure recyclable materials, as well as to develop a plan for the recycling process.

Ammonia, a molecule that is gaining more interest as a fueling vector, has been considered as a candidate to power transport, produce energy, and support heating applications for decades. However, the particular characteristics of the molecule always made it a chemical with low, if any, benefit once compared to conventional fossil fuels. Still, the current need to decarbonize our economy makes the search of new methods crucial to use chemicals, such as ammonia, that can be produced and employed without incurring in the emission of carbon oxides. Therefore, current efforts in this field are leading scientists, industries, and governments to seriously invest efforts in the development of holistic solutions capable of making ammonia a viable fuel for the transition toward a clean future. On that basis, this review has approached the subject gathering inputs from scientists actively working on the topic. The review starts from the importance of ammonia as an energy vector, moving through all of the steps in the production, distribution, utilization, safety, legal considerations, and economic aspects of the use of such a molecule to support the future energy mix. Fundamentals of combustion and practical cases for the recovery of energy of ammonia are also addressed, thus providing a complete view of what potentially could become a vector of crucial importance to the mitigation of carbon emissions. Different from other works, this review seeks to provide a holistic perspective of ammonia as a chemical that presents benefits and constraints for storing energy from sustainable sources. State-of-the-art knowledge provided by academics actively engaged with the topic at various fronts also enables a clear vision of the progress in each of the branches of ammonia as an energy carrier. Further, the fundamental boundaries of the use of the molecule are expanded to real technical issues for all potential technologies capable of using it for energy purposes, legal barriers that will be faced to achieve its deployment, safety ...

Novel species of fungi described in the present study include the following from Malaysia: Castanediella eucalypti from Eucalyptus pellita, Codinaea acacia from Acacia mangium, Emarcea eucalyptigena from Eucalyptus brassiana, Myrtapenidiella eucalyptorum from Eucalyptus pellita, Pilidiella eucalyptigena from Eucalyptus brassiana and Strelitziana malaysiana from Acacia mangium. Furthermore, Stachybotrys sansevieriicola is described from Sansevieria ehrenbergii (Tanzania), Phacidium grevilleae from Grevillea robusta (Uganda), Graphium jumulu from Adansonia gregorii and Ophiostoma eucalyptigena from Eucalyptus marginata (Australia), Pleurophoma ossicola from bone and Plectosphaerella populi from Populus nigra (Germany), Colletotrichum neosansevieriae from Sansevieria trifasciata, Elsinoë othonnae from Othonna quinquedentata and Zeloasperisporium cliviae (Zeloasperisporiaceae fam. nov.) from Clivia sp. (South Africa), Neodevriesia pakbiae, Phaeophleospora hymenocallidis and Phaeophleospora hymenocallidicola on leaves of a fern (Thailand), Melanconium elaeidicola from Elaeis guineensis (Indonesia), Hormonema viticola from Vitis vinifera (Canary Islands), Chlorophyllum pseudoglobossum from a grassland (India), Triadelphia disseminata from an immunocompromised patient (Saudi Arabia), Colletotrichum abscissum from Citrus (Brazil), Polyschema sclerotigenum and Phialemonium limoniforme from human patients (USA), Cadophora vitícola from Vitis vinifera (Spain), Entoloma flavovelutinum and Bolbitius aurantiorugosus from soil (Vietnam), Rhizopogon granuloflavus from soil (Cape Verde Islands), Tulasnella eremophila from Euphorbia officinarum subsp. echinus (Morocco), Verrucostoma martinicensis from Danaea elliptica (French West Indies), Metschnikowia colchici from Colchicum autumnale (Bulgaria), Thelebolus microcarpus from soil (Argentina) and Ceratocystis adelpha from Theobroma cacao (Ecuador). Myrmecridium iridis (Myrmecridiales ord. nov., Myrmecridiaceae fam. nov.) is also described from Iris sp. (The Netherlands). Novel genera include (Ascomycetes): Budhanggurabania from Cynodon dactylon (Australia), Soloacrosporiella, Xenocamarosporium, Neostrelitziana and Castanediella from Acacia mangium and Sabahriopsis from Eucalyptus brassiana (Malaysia), Readerielliopsis from basidiomata of Fuscoporia wahlbergii (French Guyana), Neoplatysporoides from Aloe ferox (Tanzania), Wojnowiciella, Chrysofolia and Neoeriomycopsis from Eucalyptus (Colombia), Neophaeomoniella from Eucalyptus globulus (USA), Pseudophaeomoniella from Olea europaea (Italy), Paraphaeomoniella from Encephalartos altensteinii, Aequabiliella, Celerioriella and Minutiella from Prunus (South Africa). Tephrocybella (Basidiomycetes) represents a novel genus from wood (Italy). Morphological and culture characteristics along with ITS DNA barcodes are provided for all taxa. ; Christian Lechat gratefully acknowledges Cesar Delnatte (DEAL, Martinique) fro the identification of the horst of Verrucostoma martinicensis. Alfredo Vizzini thanks Edmondo Grilli (Pescara, Italy), for comments on the text of Tephrocybella griseonigrescens. Dilnora Gouliamova was supported by a grant (D002-TK-176) from the Bulgarian Science Fund, EU F6 Synthesis program. She is grateful to K. Metodiev for permission to use the picture of Colchicum autumnale (http://www.bgflora. net/). Olga V. Morozova, Eugene S. Popov and Xiao-Lan He are grateful to V. Trunov, T.H. Li, C.Y. Deng, H. Huang and Y.W. Xia for valuable Entoloma collections. Alina V. Alexandrova was supported by the Russian Science Foundation (project N 14-50-00029). Ekaterina F. Malysheva, Olga V. Morozova, Alexander E. Kovalenko and Eugene S. Popov acknowledge financial support from the Russian Foundation for Basic Research (project 13-04-00838a and 15-04-04645a). Margarita Dueñas, María P. Martín and M. Teresa Telleria acknowledge financial support from the Plan Nacional I+D+I projects No. CGL2009-07231 and CGL2012-3559. They are also thankful to Marian Gleen (Seton Hall University, USA) for commenting on the text. Cony Decock gratefully acknowledges the financial support received from the FNRS / FRFC (convention FRFC 2.4544.10), the CNRS-French Guiana and the Nouragues staff, which enabled fieldwork in French Guiana, and the Belgian State – Belgian Federal Science Policy through the BCCMTM research programme. We also thank the CBS technical staff, A. van Iperen (cultures), M. Vermaas (photographic plates) and M. Starink-Willemse (DNA isolation, amplification and sequencing) for their invaluable assistance. ; Peer reviewed

The classic papers that laid the foundations of modern ecology alongside commentaries by noted ecologists. The period of 1970 to 1995 was a time of tremendous change in all areas of ecology—from an increased rigor for experimental design and analysis to the reevaluation of paradigms, new models for understanding, and theoretical advances. Edited by ecologists Thomas E. Miller and Joseph Travis, Foundations of Ecology II includes facsimiles of forty-six papers from this period alongside expert commentaries that discuss a total of fifty-three key studies, addressing topics of diversity, predation, complexity, competition, coexistence, extinction, productivity, resources, distribution, abundance, and conservation. The result is more than a catalog of historic firsts; this book offers diverse perspectives on the foundational papers that led to today's ecological work. Like this book's 1991 predecessor, Foundations of Ecology edited by Leslie A. Real and James H. Brown, Foundations of Ecology II promises to be the essential primer for graduate students and practicing ecologists for decades to come