Suchergebnisse

Investigation of nitride fuels and their properties has, for decades, been propelled on the basis of their desirable high metal densities and high thermal conductivities, both of which oer intrinsic advantages to performance, economy, and safety in fast and light water reactor systems. In this time several key obstacles have been identied as impeding the implementation of these fuels for commercial applications; namely chemical interactions with air and steam, the noted diculty in sintering of the material, and the high costs associated with the enrichment of 15N. The combination of these limitations, historically, led to the well founded conclusion that the most appropriate use of nitride fuels was in the fast reactor fuel cycle, where the cost burdens associated with them is substantially less. Indeed, it is within this context that the vast majority of work on nitrides has been and continues to be done. Nevertheless, following the 2011 Fukushima-Daiichi nuclear accident, a concerted governmental-industrial eort was embarked upon to explore the alternatives of so-called \accident tolerant" and \high performance" fuels. These fuels would, at the same time, improve the response of the fuel-clad system to severe accidents and improve the economy of operation for light water reactor systems. Among the various candidates proposed are uranium nitride, uranium silicide, and a third \uranium nitride-silicide" composite featuring a mixture of the former. In this thesis a method has been established for the synthesis, fabrication, and characterization of high purity uranium nitride, and uranium nitride-silicide composites, prepared by the spark plasma sintering (SPS) technique. A specic result has been to isolate the impact of the processing parameters on the microstructure of representative fuel pellets, essentially permitting any conceivable microstructure of interest to be fabricated. This has enabled the development of a highly reproducible technique for the production of pellets with microstructures tailored ...

Negotiations to end the world 's longest-running civil war have recently begun. Prospects for peace are better than ever before, but significant obstacles remain. (Survival / SWP)

Objective: To study the influence of 10 min of cyclic twisting motion on abdominal and back muscle activities. Background: Repetitive (cyclic) occupational activity was identified by many epidemiological reports to be a risk factor for the development of work-related musculoskeletal disorders. Biomechanical and physiological confirmation, however, is lacking. Methods: Trunk muscle electromyography (EMG) was recorded while participants performed a continuous 10-min maximum lumbar cyclic twisting to the left, and maximum isometric twist to the left and right sides was measured before and after the exercise. Results: Abdominal muscles contracted symmetrically, independent of twisting direction. The left posterior muscles' integrated EMG (IEMG) decreased during the exercise, whereas the IEMG of the right posterior muscle increased. Simultaneously with increased antagonist coactivity level of the right posterior muscles after the exercise, decrease in maximal isometric left twisting torque was observed. The abdominal muscles did not exhibit any significant changes during the exercise. After the exercise, the right abdominals demonstrated a significant increase in effort, which was independent of the direction of the maximal effort isometric test. Conclusions: The change in muscle activity is attributed to neuromuscular compensation for the development of laxity and microdamage in the soft tissue (ligaments, discs, facet capsules, etc.) of the lumbar spine. Application: The results of this study increase understanding of the risk factors associated with low back disorder induced by labor-intensive occupations that involve cyclic lateral twisting.