Suchergebnisse

Chromium carbide-based cermets are suitable for use in abrasive and corrosive environments. This work presents the fabrication of chromium carbide-based cermets by a very fast sintering process: Electric Resistance Sintering. The thermal cycle duration was less than 1 s and without protective atmosphere. Two different compositions were studied: Cr3C2-25NiCr (wt%) and WC-20Cr3C2-7Ni (wt%). Microstructure and crystallographic phases of the initial powders and sintered materials are presented. In addition, hardness and toughness were characterized and compared to conventional materials. One important issue of ERS is the size and homogeneity of the pieces. This work presents the also the fabrication of a mining wear piece and some aspects about scaling up. ; This work is financially supported by the European Institute of Innovation and Technology (EIT Raw Materials), a body of European Union (Horizon 2020 Framework Programme) under the project FASTRAM.

According to recent market studies of the North American company Allied Market Research, the field of photonic sensors is an emerging strategic field for the following years and it is expected to garner $18 billion by 2021. The integration of micro and nanofabrication technologies in the field of sensors has allowed the development of new technological concepts such as lab-on-a-chip, which have achieved extraordinary advances in terms of detection and applicability, for example in the field of biosensors. This continuous development has allowed that equipment consisting of many complex devices that occupied a whole room a few years ago, at present it is possible to handle them in the palm of the hand; that formerly long duration processes are carried out in a matter of milliseconds and that a technology previously dedicated solely to military or scientific uses is available to the vast majority of consumers. The adequate combination of micro and nanostructured coatings with optical fiber sensors has permitted us to develop novel sensing technologies, such as the first experimental demonstration of lossy mode resonances (LMRs) for sensing applications, with more than one hundred citations and related publications in high rank journals and top conferences. In fact, fiber optic LMR-based devices have been proven as devices with one of the highest sensitivity for refractometric applications. Refractive index sensitivity is an indirect and simple indicator of how sensitive the device is to chemical and biological species, topic where this proposal is focused. Consequently, the utilization of these devices for chemical and biosensing applications is a clear opportunity that could open novel and interesting research lines and applications as well as simplify current analytical methodologies. As a result, on the basis of our previous experience with LMR based sensors to attain very high sensitivities, the objective of this paper is presenting the route for the development of label-free optical waveguide sensing platform ...