Suchergebnisse

AbstractThis paper is devoted to the investigation of the relationship between concentrations of traffic-related pollutants at pedestrian level in the street and indoor pollutant concentrations inside different rooms of different floors of a standard building. CFD modelling covering the whole urban environment, including the interior of a target building, is used to explicitly simulate wind flow and pollutant dispersion outdoors and indoors. A wide range of scenarios considering different percentage and location of open windows and different wind directions is investigated. A large variability of indoor pollutant concentrations is found depending on the floor and configuration of the open/closed windows, as well as the wind direction and its incidence angle. In general, indoor pollutant concentrations decrease with floor, but this decrease is different depending on the scenario and the room investigated. For some conditions, indoor concentrations higher than the spatially averaged values in the street (up to a ratio of 1.4) are found in some rooms due to the high pollutant concentrations close to open windows. This behavior may lead, on average, to higher exposure inside the room than outside although, in general, indoor pollutant concentrations are lower than that found in the street at pedestrian level. Results are averaged for all scenarios and rooms being the average ratio between indoor and oudoor concentrations 0.56 ± 0.24, which is in accordance with previous studies in real buildings. This paper opens to a unified approach for the assessment of air quality of the total indoor and outdoor environment.

International audience Global climate is changing as a result of anthropogenic warming, leading to higher daily excursions of temperature in cities. Such elevated temperatures have great implications on human thermal comfort and heat stress, which should be closely monitored. Current methods for heat exposure assessments (surveys, microclimate measurements, and laboratory experiments), however, present several limitations: measurements are scattered in time and space and data gathered on outdoor thermal stress and comfort often does not include physiological and behavioral parameters. To address these shortcomings, Project Coolbit aims to introduce a human-centric approach to thermal comfort assessments. In this study, we propose and evaluate the use of wrist-mounted wearable devices to monitor environmental and physiological responses that span a wide range of spatial and temporal distributions. We introduce an integrated wearable weather station that records a) microclimate parameters (such as air temperature and humidity), b) physiological parameters (heart rate, skin temperature and humidity), and c) subjective feedback. The feasibility of this methodology to assess thermal comfort and heat stress is then evaluated using two sets of experiments: controlled-environment physiological data collection, and outdoor environmental data collection. We find that using the data obtained through the wrist-mounted wearables, core temperature can be predicted non-invasively with 95 percent of target attainment (PTA) within ±0.27◦C. Additionally, a direct connection between the air temperature at the wrist (Ta,w) and the perceived activity level (PAV) of individuals was drawn. We observe that with increased Ta,w, the desire for physical activity is significantly reduced, reaching "Transition only" PAV level at 36◦C. These assessments reveal that the wearable methodology provides a comprehensive and accurate representation of human heat exposure, which can be extended in real-time to cover a large spatial distribution in a ...

AbstractThis paper aims to assess the impact of individual measures for NOx emission reduction on NO2 concentrations at very high spatial resolution in an urban district of Madrid City (Spain). A methodology based on a set of Computational Fluid Dynamics simulations for 16 meteorological scenarios combined with the CHIMERE model for background pollution is used to obtain annual NO2 concentration maps. Two scenarios included in the Spanish National Air Pollution Control Programme are investigated: NOx emission reductions from the installation of more efficient boilers for domestic heating (ECOBOIL) and from the partly substitution of passenger cars with combustion engines by electric cars (EC). This analysis is extended to 9 additional scenarios of more ambitious implementation of electric vehicles in order to determine what the NOx emission reduction required for the annual mean NO2 concentration EU limit value not being exceeded is. The ECOBOIL scenario has a very weak impact on the NO2 concentrations. However, the EC scenario implies a more significant reduction of the NO2 concentrations, but not enough to fully remove NO2 limit value exceedances in the study area. A small additional (compared with the EC scenario) implementation of electric vehicles seems to fulfil that the spatially averaged NO2 concentration be lower than the EU limit value, but the area with exceedances is still very large. However, stronger traffic emission reductions (80%) corresponding to the most ambitious scenarios are needed in order to reach that at least 95% of the domain is free of EU limit value exceedances.

Current European legislation aims to reduce the air pollutants emitted by European countries in the coming years. In this context, this article studies the effects on air quality of the measures considered for 2030 in the Spanish National Air Pollution Control Programme (NAPCP). Three different emission scenarios are investigated: a scenario with the emissions in 2016 and two other scenarios, one with existing measures in the current legislation (WEM2030) and another one considering the additional measures of NAPCP (WAM2030). Previous studies have addressed this issue at a national level, but this study assesses the impact at the street scale in three neighborhoods in Madrid, Spain. NO2 concentrations are modelled at high spatial resolution by means of a methodology based on computational fluid dynamic (CFD) simulations driven by mesoscale meteorological and air quality modelling. Spatial averages of annual mean NO2 concentrations are only estimated to be below 40 µg/m3 in all three neighborhoods for the WAM2030 emission scenarios. However, for two of the three neighborhoods, there are still zones (4–12% of the study areas) where the annual concentration is higher than 40 µg/m3. This highlights the importance of considering microscale simulations to assess the impacts of emission reduction measures on urban air quality.

The 2008 European Air Quality Directive (AQD) (2008/50/EC) encourages the use of models in combination with monitoring in a range of applications. It also requires Member States to design appropriate air quality plans for zones where the air quality does not comply with the AQD limit values. In order to cope with these various elements, a wide range of different modeling methods have been developed and applied by EU Member States in the last decade to assess the effects of local and regional emission abatement policy options on air quality and human health. However, an overall review of the methodologies that are used in different countries to compile local and regional air quality plans has not been performed so far. Such a review has been the objective of the APPRAISAL EU FP7 project with the main goal to identify methodologies and their limitations and to propose possible key areas to be addressed by research and innovation on the basis of this review. To fulfill these objectives, a structured online database of methodologies has been developed in collaboration with experts involved in the design of air quality plans (AQP). The current work relies on the APPRAISAL database which currently totals 59 contributions from 13 Member States. In this paper we summarize the outcome of the APPRAISAL project with respect to the review of current Integrated Assessment Modeling practices. ; SCOPUS: ar.j ; info:eu-repo/semantics/published

International audience ; This chapter provides a review, derived from the extended survey conducted within the APPRAISAL project, of the integrated assessment methodologies used in different countries to design air quality plans and to estimate the effects of emission abatement policy options on human health. The final purpose of this review is to foster the dissemination of knowledge on integrated assessment for air quality planning at regional and local scales, and to provide policy makers and regulatory bodies across EU member states with a broader understanding of the underlying scientific concepts.

International audience ; This chapter provides a review, derived from the extended survey conducted within the APPRAISAL project, of the integrated assessment methodologies used in different countries to design air quality plans and to estimate the effects of emission abatement policy options on human health. The final purpose of this review is to foster the dissemination of knowledge on integrated assessment for air quality planning at regional and local scales, and to provide policy makers and regulatory bodies across EU member states with a broader understanding of the underlying scientific concepts.