Suchergebnisse

Switchable mechanically induced changes in the wetting behavior of surfaces are of para-mount importance for advanced microfluidic, self‐cleaning and biomedical applications. In this work we show that the well‐known polydimethylsiloxane (PDMS) elastomer develops self‐patterning when it is coated with nanostructured TiO2 films prepared by physical vapor deposition at glancing angles and subsequently subjected to a mechanical deformation. Thus, unlike the disordered wrinkled surfaces typically created by deformation of the bare elastomer, well‐ordered and aligned micro‐scaled grooves form on TiO2/PDMS after the first post‐deposition bending or stretching event. These regularly patterned surfaces can be reversibly modified by mechanical deformation, thereby inducing a switchable and reversible wetting petal effect and the sliding of liquid droplets. When performed in a dynamic way, this mechanical actuation produces a unique capacity of liquid droplets (water and diiodomethane) transport and tweezing, this latter through their selective capture and release depending on their volume and chemical characteristics. Scanning electron and atomic force microscopy studies of the strained samples showed that a dual‐scale rough-ness, a parallel alignment of patterned grooves and their reversible widening upon deformation, are critical factors controlling this singular sliding behavior and the possibility to tailor their response by the appropriate manufacturing of surface structures. ; European Union 899352 ; Ministerio de Ciencia e Innovación PID2019- 110430GB-C21, PID2019-109603RA-I0, MAT2013-40852-R, MAT2013- 42900-P ; Ministerio de Economía y Competitividad 201560E055 ; Junta de Andalucía AT17-6079, P18-RT-3480

In this article we present a new type of 1D nanostructures consisting of supported hollow ZnO nanorods (NRs) decorated with Ag nanoparticles (NPs). The 3D reconstruction by high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) electron tomography reveals that the Ag NPs are distributed along the hollow interior of the ZnO NRs. Supported and vertically aligned Ag-NPs@ZnO-NRs grow at low temperature (135 °C) by plasma enhanced chemical vapour deposition on heterostructured substrates fabricated by sputtered deposition of silver on flat surfaces of Si wafers, quartz slides or ITO. The growth mechanisms of these structures and their wetting behavior before and after visible light irradiation are critically discussed. The as prepared surfaces are superhydrophobic with water contact angles higher than 150°. These surfaces turn into superhydrophilic with water contact angles lower than 10° after prolonged irradiation under both visible and UV light. The evolution rate of the wetting angle and its dependence on the light characteristics are related to the nanostructure and the presence of silver embedded within the ZnO NRs.  ; European Union NMP3-CT-2006- 032583 ; Ministerio de Ciencia e Innovación MAT2010-21228, MAT2010-18447, CSD2008-00023 ; Junta de Andalucía P09-TEP-5283, CTS-5189

Oblique angle deposition (OAD) is a powerful technique for the fabrication of porous nanostructured oxide thin films. OAD films typically present a columnar tilted nanostructure due to geometrical shadowing effects during the thin film growth. In this work, we study the fabrication of transparent and conducting indium tin oxide films (ITO) by OAD assisted by a microwave ECR plasma. The objective of assisting the deposition with a plasma discharge is to modify the growth mechanism of the OAD process introducing additional parameters to control the columnar microstructure, composition, porosity of the films. The results indicate the OAD ITO deposition assisted by the plasma discharge is a very effective process to develop in-plane structural anisotropy in the ITO nanocolumnar films what determines their electrical properties. ; Ministerio de Economía y Competitividad MAT2016-79866-R, MAT2013-40852-R, MAT2013-42900-P ; MINECO-CSIC 201560E055, IJCI-2014-21226 ; European Union 661480

This article establishes the bases for a vacuum and plasma supported methodology for the fabrication at mild temperatures of nanostructured platinum in the form of porous layers and nanocolumns using platinum octaethylporphyrin as precursor. In addition, the application of these materials as tunable optical filters and nano-counterelectrodes is proved. On one hand, the transparency in the ultraviolet-visible-near infrared range can be adjusted precisely between 70% and 1% by tuning the deposition and processing conditions, obtaining a high spectral planarity. Deviations of the spectra from an ideal flat filter are below 4%, paving the way to the fabrication of neutral density filters. The transparency limit values yield a sheet resistivity of ¿1350 and 120 ¿ ¿-1, respectively. On the other hand, the catalytic properties of the nanostructures are further demonstrated by their implementation as counterelectrodes of excitonic solar cells surpassing the performance of commercial platinum as counterelectrode in a 20% of the overall cell efficiency due to simultaneous enhancement of short-circuit photocurrent and open-circuit photovoltage. One of the most interesting features of the developed methodology is its straightforward application to other metal porphyrins and phthalocyanines readily sublimable under mild vacuum and temperature conditions. ; Junta de Andalucía TEP8067, FQM-6900, FQM 1851, P12-FQM-2265 ; Ministerio de Economía y Competitividad MAT2013-40852-R, MAT2013-42900-P, MAT2013-47192-C3-3-R, MAT2016-79866-R ; MINECO-CSIC 201560E055 ; European Union 661480