Suchergebnisse

This research is funded by the European Social Fund according to the activity 'Improvement of researchers' qualification by implementing world-class R&D projects' of Measure No. 09.3.3-LMT- K-712, project "Investigation of the application of TiO2 and ZnO for the visible light assisted photocatalytical disinfection of the biologically contaminated water" (09.3.3-LMT-K-712-01-0175). The authors express gratitude for the S. Tuckute, M. Urbonavicius, G. Laukaitis and K. Bockute for their valuable input in current work. © 2019. This work is licensed under a CC BY-NC-ND 4.0 license. ; Black colour TiO2 films were synthesized on amorphous fused silica substrates by DC magnetron sputtering technique with carbon powders placed at the working magnetron surface. Comprehensive sample analysis by X-ray diffraction, energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy showed that the rutile/anatase heterostructure TiO2 films were successfully formed. Moreover, observation of Osingle bondTisingle bondC bonds confirmed that TiO2 phase was doped by carbon additives. Scanning electron microscopy, atomic force microscopy and X-ray diffraction were used to identify the effect of deposition time and TiO2 film thickness on the surface morphology, roughness and crystallite size. Results of electron spin resonance showed that oxygen vacancies were generated on the surface with trapped unpaired electrons. Optical analysis by UV–vis light spectrophotometer showed that TiO2 films with carbon additives improve its capability to absorb visible light. Accordingly, methylene blue bleaching experiments under UVsingle bondA and visible light irradiation showed that black colour TiO2 films are capable to decompose methylene blue solution at both UVsingle bondA and visible light irradiation. --- / / / --- This is the preprint of the following article: Sarunas Varnagiris, Arturs Medvids, Martynas Lelis, Darius Milcius, Andris Antuzevics, Black carbon-doped TiO2 films: Synthesis, characterization and photocatalysis, Journal of Photochemistry and Photobiology A: Chemistry Volume 382, 1 September 2019, 111941 (2019), DOI 10.1016/j.jphotochem.2019.111941, which has been published at https://www.sciencedirect.com/science/article/abs/pii/S1010603019303442. This article may be used for non-commercial purposes in accordance with Elsevier Terms and Conditions for Sharing and Self-Archiving. This work is licensed under a CC BY-NC-ND 4.0 license. ; European Social Fund 09.3.3-LMT-K-712-01-0175; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017 TeamingPhase2 under grant agreement No. 739508, project CAMART².

One of the directions of application of the perforated metal material is their use as cutting elements in the production of processing tools. In this case it is necessary to carry out hardening of cutting surfaces to increase their hardness. One of the methods of hardening metals could be laser treatment. Therefore, the present work is a study of the effect of Nd:YAG laser radiation on the microstructure and hardness of fragments formed from steel perforated tape. Different laser scan speeds (doses) were used in the experiments. The results have shown that the increase the microhardness of 30-40% after the laser treatment of steel perforated tape in the surface layer in a depth range up to 1 μm take place. The studies of microstructure of fragments formed from steel perforated tape have shown the reduction of the structure size and the presence of a thin oxide compounds, which is consistent with the results on nanoindentation. Hardening of the metal by laser radiation is carried out without surface melting which eliminates the change of macroroughness and the need for subsequent machining process. ; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²