The growth of a fullerene derivative (PCBM) on top of a layer of a tetrathiafulvalene (TTF) derivative previously deposited on Au(111) has been studied by scanning tunneling microscopy (STM). The results show that the preferential interaction with the gold substrate induces the exchange of PCBM molecules with the exTTF monolayer, expelling exTTF molecules to the outer surface. This exchange process is forbidden when the thickness of the exTTF layer increases above the monolayer, and the larger surface energy of PCBM leads to the growth of 3D islands ; Our work was supported by the MICINN of Spain (FIS2010-18847, FIS2012-33011), Comunidad de Madrid (NanobiomagnetS2009/MAT-1726), CONSOLIDER-INGENIO on Molecular Nanoscience (CSD2007-00010) and European Union (SMALL PITN-GA- 2009-23884)
The accurate determination of electronic temperatures in metallic nanostructures is essential for many technological applications, like plasmon-enhanced catalysis or lithographic nanofabrication procedures. In this Letter, we demonstrate that the electronic temperature can be accurately measured by the shape of the tunnel electroluminescence emission edge in tunnel plasmonic nanocavities, which follows a universal thermal distribution with the bias voltage as the chemical potential of the photon population. A significant deviation between electronic and lattice temperatures is found below 30 K for tunnel currents larger than 15 nA. This deviation is rationalized as the result of a two-electron process in which the second electron excites plasmon modes with an energy distribution that reflects the higher temperature following the first tunneling event. These results dispel a long-standing controversy on the nature of overbias emission in tunnel junctions and adds a new method for the determination of electronic temperatures and quasiparticle dynamics. ; R.M. and R.O. acknowledge financial support from the Spanish Ministry for Economy and Competitiveness (Grants PGC2018-098613-B-C21, PGC2018-096047-B-I00), the regional government of Comunidad de Madrid (Grant S2018/NMT-4321), Universidad Autónoma de Madrid (UAM/48) and IMDEA Nanoscience. Both IMDEA Nanoscience and IFIMAC acknowledge support from the Severo Ochoa and Maria de Maeztu Programmes for Centres and Units of Excellence in R&D (MINECO, Grants SEV-2016-0686 and CEX2018-000805-M). R.O. acknowledges support from the excellence programme Echegaray, funded by the regional government of Madrid. A.A. and V.M.S. acknowledge support from the Spanish Ministry of Science and Innovation (Grants Nos. PID2019-103910GB-I00 and PID2019-105488GB-I00, respectively) and from the Projects of the Basque Government for consolidated groups of the Basque University, through the Department of Universities (Grant Nos. IT-1246-19 and IT-1164-19, respectively). ; Peer reviewed
Atomically-sharp tips in close proximity of metal surfaces create plasmonic nanocavities supporting both radiative (bright) and non-radiative (dark) localized surface plasmon modes. Disentangling their respective contributions to the total density of optical states remains a challenge. Electroluminescence due to tunnelling through the tip-substrate gap could allow the identification of the radiative component, but this information is inherently convoluted with that of the electronic structure of the system. In this work, we present a fully experimental procedure to eliminate the electronic-structure factors from the scanning tunnelling microscope luminescence spectra by confronting them with spectroscopic information extracted from elastic current measurements. Comparison against electromagnetic calculations demonstrates that this procedure allows the characterization of the meV shifts experienced by the nanocavity plasmonic modes under atomic-scale gap size changes. Therefore, the method gives access to the frequency-dependent radiative Purcell enhancement that a microscopic light emitter would undergo when placed at such nanocavity ; We acknowledge financial support from the Spanish Ministry for Economy and Competitiveness (grants FIS2015-72482-EXP, FIS2015-64951-R, FIS2016-78591-C3-1-R, PGC2018-098613—B-C21, PGC2018-096047-B-I00, RTI2018-099737-B-I00 and MAT2014-53432-C5-5-R), the regional government of Comunidad de Madrid (grant S2018/NMT-4321), Universidad Autónoma de Madrid (UAM/48 and UAM/134) and IMDEA Nanoscience. Both IMDEA Nanoscience and IFIMAC acknowledge support from the Severo Ochoa and Maria de Maeztu Programmes for Centres and Units of Excellence in R&D (MINECO, Grants SEV-2016-0686 and MDM-2014-0377). We also acknowledge support by the QuantERA program of the European Union with funding by the Spanish AEI through project PCI2018-093145
4 páginas, 4 figuras.-- PACS numbers: 73.20.-r, 68.37.Ef, 68.55.-a, 73.22.Pr.-- et al. ; We explore the spatial variations of the unoccupied electronic states of graphene epitaxially grown on Ru(0001) and observed three unexpected features: the first graphene image state is split in energy; unlike all other image states, the split state does not follow the local work function modulation, and a new interfacial state at þ3 eV appears on some areas of the surface. First-principles calculations explain the observations and permit us to conclude that the system behaves as a self-organized periodic array of quantum dots. ; Financial support by the Spanish MICINN through project CONSOLIDER-INGENIO 2010 on Molecular Nanoscience and Grants No. FIS2007-61114 and No. FIS2007-6671, Comunidad de Madrid through the program NANOBIOMAGNET S-2009/MAT1726, the Basque Government (Grant No. IT-366-07 and inanoGUNE projects) is gratefully acknowledged. ; S-2009/MAT-1726/Nanobiomagnet ; Peer reviewed
Nanotechnology-based approaches hold substantial potential to avoid chemoresistance and minimize side effects. In this work, we have used biocompatible iron oxide magnetic nanoparticles (MNPs) called MF66 and functionalized with the antineoplastic drug doxorubicin (DOX) against MDA-MB-231 cells. Electrostatically functionalized MNPs showed effective uptake and DOX linked to MNPs was more efficiently retained inside the cells than free DOX, leading to cell inactivation by mitotic catastrophe, senescence and apoptosis. Both effects, uptake and cytotoxicity, were demonstrated by different assays and videomicroscopy techniques. Likewise, covalently functionalized MNPs using three different linkers—disulfide (DOX-S-S-Pyr, called MF66-S-S-DOX), imine (DOX-I-Mal, called MF66-I-DOX) or both (DOX-I-S-S-Pyr, called MF66-S-S-I-DOX)—were also analysed. The highest cell death was detected using a linker sensitive to both pH and reducing environment (DOX-I-S-S-Pyr). The greatest success of this study was to detect also their activity against breast cancer stem-like cells (CSC) from MDA-MB-231 and primary breast cancer cells derived from a patient with a similar genetic profile (triple-negative breast cancer). In summary, these nanoformulations are promising tools as therapeutic agent vehicles, due to their ability to produce efficient internalization, drug delivery, and cancer cell inactivation, even in cancer stem-like cells (CSCs) from patients ; This research was funded by the European Seventh Framework Program (grant agreement number 262943); the European Union's Horizon 2020 research and innovation programme (grant agreement number 685795); Ministerio de Economía y Competitividad, Spain (grants CTQ2016-78454-C2-2-R, BIO2016-77367-C2-1-R and SAF2017-87305-R); Basque Government Elkartek KK- 2017/00008; Comunidad de Madrid (IND2017/IND-7809; S2017/BMD-3867 RENIM-CM and S2018/NMT-4321 NANOMAGCOST-CM); NIHR Manchester Biomedical Research Centre (IS-BRC-1215-20007) and Breast Cancer Now (MAN-Q2); co-financed by European Structural Cancers 2020, 12, 1397 17 of 19 and Investment Fund, Asociación Española Contra el Cáncer (Singulares 2014) and IMDEA Nanociencia. CIC biomaGUNE acknowledges Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant MDM-2017-0720). IMDEA Nanociencia acknowledges support from the 'Severo Ochoa' Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686)
TCNQ derivatives adsorbed on a metal surface undergo a self-limited decyanation reaction that only affects two out of the four cyano groups in the molecule. Combined Scanning Tunneling Microscopy/X-ray Photoelectron Spectroscopy experiments and Density Functional Theory calculations relate the self-limiting behavior to the transfer of electrons from the metal to the molecule ; We thank the CCC-UAM and the RES for allocation of computer time. Our work has been supported by the MINECO of Spain (MAT2009-13488, FIS2010-18847, FIS2010-15127, FIS2012-33011, CTQ2010-17006, CTQ2011-24652/BTQ), Comunidad de Madrid (Nanobiomagnet S2009/MAT-1726, Madrisolar-2 S2009/PPQ-1533), CONSOLIDER-INGENIO on Molecular Nanoscience (CSD2007- 00010) and European Union (SMALL PITN-GA-2009-23884)
The COVID-19 pandemic has brought to light the need for fast and sensitive detection methods to prevent the spread of pathogens. The scientific community is making a great effort to design new molecular detection methods suitable for fast point-of-care applications. In this regard, a variety of approaches have been developed or optimized, including isothermal amplification of viral nucleic acids, CRISPR-mediated target recognition, and read-out systems based on nanomaterials. Herein, we present CASCADE (CRISPR/CAS-based Colorimetric nucleic Acid DEtection), a sensing system for fast and specific naked-eye detection of SARS-CoV-2 RNA. In this approach, viral RNA is recognized by the LwaCas13a CRISPR protein, which activates its collateral RNase activity. Upon target recognition, Cas13a cleaves ssRNA oligonucleotides conjugated to gold nanoparticles (AuNPs), thus inducing their colloidal aggregation, which can be easily visualized. After an exhaustive optimization of functionalized AuNPs, CASCADE can detect picomolar concentrations of SARS-CoV-2 RNA. This sensitivity is further increased to low femtomolar (3 fM) and even attomolar (40 aM) ranges when CASCADE is coupled to RPA or NASBA isothermal nucleic acid amplification, respectively. We finally demonstrate that CASCADE succeeds in detecting SARS-CoV-2 in clinical samples from nasopharyngeal swabs. In conclusion, CASCADE is a fast and versatile RNA biosensor that can be coupled to different isothermal nucleic acid amplification methods for naked-eye diagnosis of infectious diseases. ; This work was supported by the Spanish Ministry of Economy and Competitiveness (SAF2017-87305-R, PID2020-119352RB-I00), Instituto de Salud Carlos III (FONDO-COVID19:COV20/00144 and COV20/00122) and Madrid Regional Government (NANOCOV-CM and IND2017/IND7809). C.E-N, M. L-V and C.R-D thank Madrid Regional Government for the pre-doctoral Grants (PEJD-2017-PRE/BMD-3730, PEJD-2018-PRE/IND-9584 and PEJD-2017-PRE/IND-4438). P.M.R thanks the Ministry of Economy, Industry and ...
The development of graphene (Gr) spintronics requires the ability to engineer epitaxial Gr heterostructures with interfaces of high quality, in which the intrinsic properties of Gr are modified through proximity with a ferromagnet to allow for efficient room temperature spin manipulation or the stabilization of new magnetic textures. These heterostructures can be prepared in a controlled way by intercalation through graphene of different metals. Using photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), we achieve a nanoscale control of thermally activated intercalation of a homogeneous ferromagnetic (FM) layer underneath epitaxial Gr grown onto (111)-oriented heavy metal (HM) buffers deposited, in turn, onto insulating oxide surfaces. XPS and STM demonstrate that Co atoms evaporated on top of Gr arrange in 3D clusters and, upon thermal annealing, penetrate through and diffuse below Gr in a 2D fashion. The complete intercalation of the metal occurs at specific temperatures, depending on the type of metallic buffer. The activation energy and the optimum temperature for the intercalation processes are determined. We describe a reliable method to fabricate and characterize in situ high-quality Gr-FM/HM heterostructures, enabling the realization of novel spin-orbitronic devices that exploit the extraordinary properties of Gr ; This research was supported by the Regional Government of Madrid through projects P2018/NMT-4321 (NANOMAGCOST-CM) and P2018/NMT-4511 (NMAT2D) and by the Spanish Ministry of Economy and Competitiveness (MINECO) through projects RTI2018-097895-B-C42, FIS2016-78591-C3-1-R, PGC2018-098613-B-C21, PGC2018-093291-B-I00, FIS2015-67367-C2-1-P, and PCIN-2015-111 (FLAGERA JTC2015 Graphene Flagship "SOgraph"). IFIMAC acknowledges support from the ″Maria de Maeztu″ programme for units of Excellence in R&D (MDM-2014-0377). IMDEA Nanoscience is supported by the "Severo Ochoa" programme for the Centres of Excellence in R&D, MINECO (grant number SEV-2016-0686)
Taming the magnetic anisotropy of lanthanides through coordination environments is crucial to take advantage of the lanthanides properties in thermally robust nanomaterials. In this work, the electronic and magnetic properties of Dy-carboxylate metal–organic networks on Cu(111) based on an eightfold coordination between Dy and ditopic linkers are inspected. This surface science study based on scanning probe microscopy and X-ray magnetic circular dichroism, complemented with density functional theory and multiplet calculations, reveals that the magnetic anisotropy landscape of the system is complex. Surface-supported metal–organic coordination is able to induce a change in the orientation of the easy magnetization axis of the Dy coordinative centers as compared to isolated Dy atoms and Dy clusters, and significantly increases the magnetic anisotropy. Surprisingly, Dy atoms coordinated in the metallosupramolecular networks display a nearly in-plane easy magnetization axis despite the out-of-plane symmetry axis of the coordinative molecular lattice. Multiplet calculations highlight the decisive role of the metal–organic coordination, revealing that the tilted orientation is the result of a very delicate balance between the interaction of Dy with O atoms and the precise geometry of the crystal field. This study opens new avenues to tailor the magnetic anisotropy and magnetic moments of lanthanide elements on surfaces. ; The ALBA synchrotron is acknowledged for providing beam time at BOREAS beamline (proposal number 2015091454). This project has received funding from the European Research Council (ERC, grant 766555) and Marie Sklodowska-Curie Actions (MSCA, project 894924) under the European Union's Horizon 2020 research and innovation programme. This work has been financed by the Spanish Ministerio de Economía, Industria y Competitividad (projects FIS2016-78591-C3-1-R, RTI2018-097895-B-C42, MAT2016-78293-C6-2-R, MAT2017-85089-C2-1-R, and PID2019-107338RB-C65); the Comunidad de Madrid (Projects S2013/MIT-2850, P2018/NMT4321, and S2018/NMT-4367); the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI); and "Severo Ochoa" Programme for Centres of Excellence in R&D (grants SEV-2016-0686, and SEV-2017-0706).
Nanometer-thick epitaxial Co films intercalated between graphene (Gr) and a heavy metal (HM) substrate are promising systems for the development of spin–orbitronic devices due to their large perpendicular magnetic anisotropy (PMA). A combination of theoretical modeling and experiments reveals the origin of the PMA and explains its behavior as a function of the Co thickness. High quality epitaxial Gr/Con/HM(111) (HM = Pt,Ir) heterostructures are grown by intercalation below graphene, which acts as a surfactant that kinetically stabilizes the pseudomorphic growth of highly perfect Co face-centered tetragonal (fct) films, with a reduced number of stacking faults as the only structural defect observable by high-resolution scanning transmission electron microscopy (STEM). Magneto-optic Kerr effect (MOKE) measurements show that such heterostructures present PMA up to large Co critical thicknesses of about 4 nm (20 ML) and 2 nm (10 ML) for Pt and Ir substrates, respectively. X-ray magnetic circular dichroism (XMCD) measurements show an inverse power law of the anisotropy of the orbital moment with Co thickness, reflecting its interfacial nature, that changes sign at about the same critical values. First principles calculations show that, regardless of the presence of graphene, ideal Co fct films on HM buffers do not sustain PMAs beyond around 6 mLs due to the in-plane contribution of the inner bulk-like Co layers. The large experimental critical thicknesses sustaining PMA can only be retrieved by the inclusion of structural defects that promote a local hcp stacking such as twin boundaries or stacking faults. Remarkably, a layer resolved analysis of the orbital momentum anisotropy reproduces its interfacial nature, and reveals that the Gr/Co interface contribution is comparable to that of the Co/Pt(Ir). ; Financial support from MINECO (Grant Nos. RTI2018-097895-B-C41, RTI2018-097895-B-C42 and RTI2018-097895-B-C43 (FUN-SOC), PID2019-103910GB-I00, FIS2016-78591-C3-1-R and FIS2016-78591-C3-2-R (SKYTRON), PGC2018-098613-B-C21 (SpOrQuMat), PCI2019-111908-2 and PCI2019-111867-2 (FLAGERA 3 grant SOgraphMEM)], from Regional Government of Madrid (grant number P2018/NMT-4321 (NANOMAGCOST-CM)) and from Gobierno Vasco-UPV/EHU (grant numbers GIU18/138 and IT-1246-19). We acknowledge experiments at ALBA BL29 via proposal no. 2019023333. IMDEA-Nanociencia acknowledges support from the "Severo Ochoa" Program for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). ; Peer reviewed
