Suchergebnisse

Abstract
Will sensor-based exposure assessment be the future in workplace settings? Static instruments with embedded sensors are already applied to monitor levels of dangerous substances—in the context of acute health effects—at critical locations. However, with wearable, lightweight, miniaturized (low-cost) sensors developing quickly, much more is possible with sensors in relation to exposure assessment. Sensors can be applied in the work environment, on machines, or on employees and may include sensors that measure chemical exposures, but also sensors or other technologies that collect contextual information to support the exposure measurements. Like every technology it also has downsides. Sensors collect data on individuals that, depending on the purpose, need to be shared with others (e.g. health, safety and environment manager). One can imagine that people are afraid of misuse. To explore possible ethical and privacy issues that may come along with the introduction of sensors in the workplace, we organized a workshop with stakeholders (n = 32) to discuss three possible sensor-based scenarios in a structured way around five themes: purpose, efficacy, intrusiveness, proportionality, and fairness. The main conclusion of the discussions was that stakeholders currently see benefits in using sensors for applied targeted studies (short periods, clear reasons). In order to find acceptance for the implementation of sensors, all individuals affected by the sensors or its data need to be involved in the decisions on the purpose and application of sensors. Possible negative side effects need to be discussed and addressed. Continuous sensor-based monitoring of workers currently appears to be a bridge too far for the participants of this workshop.

Abstract
This commentary explores the use of high-resolution data from new, miniature sensors to enrich models that predict exposures to chemical substances in the workplace. To optimally apply these sensors, one can expect an increased need for new models that will facilitate the interpretation and extrapolation of the acquired time-resolved data. We identified three key modelling approaches in the context of sensor data, namely (i) enrichment of existing time-integrated exposure models, (ii) (new) high-resolution (in time and space) empirical models, and (iii) new 'occupational dispersion' models. Each approach was evaluated in terms of their application in research, practice, and for policy purposes. It is expected that substance-specific sensor data will have the potential to transform workplace modelling by re-calibrating, refining, and validating existing (time-integrated) models. An increased shift towards 'sensor-driven' models is expected. It will allow for high-resolution modelling in time and space to identify peak exposures and will be beneficial for more individualized exposure assessment and real-time risk management. New 'occupational dispersion models' such as interpolation, computational fluid dynamic models, and assimilation techniques, together with sensor data, will be specifically useful. These techniques can be applied to develop site-specific concentration maps which calculate personal exposures and mitigate worker exposure through early warning systems, source finding and improved control design and control strategies. Critical development and investment needs for sensor data linked to (new) model development were identified such as (i) the generation of more sensor data with reliable sensor technologies (achieved by improved specificity, sensitivity, and accuracy of sensors), (ii) investing in statistical and new model developments, (iii) ensuring that we comply with privacy and security issues of concern, and (iv) acceptance by relevant target groups (such as employers and employees) and stimulation of these new technologies by policymakers and technology developers.

Abstract
Low-cost particulate matter sensors are a up-and-coming technology for monitoring occupational exposure to hazardous substances in high spatial and temporal resolutions. Low costs, small sizes and high measurement frequencies offer the potential to continuously, automatically and remotely measure dust exposure and emission in the workplace. However, much remains unknown about how these devices can be successfully applied in occupational settings. TNO (the Netherlands) has, in collaboration with HSE (UK) and NIOSH (US), performed field studies at seven companies in the bakery, woodworking and welding industry to explore the use of sensors. A total of 145 full / half-shift measurements were collected for 37 workers and 15 static positions. Measurement data was obtained using four types of sensor and conventional respirable gravimetric and high-resolution reference devices. High-resolution contextual information was collected using additional sensors, including an ultrasound-based indoor positioning system, to investigate how these can further characterize exposure situations. Sensor accuracy compared to reference measurements ranged up to R2-values of 0.92, but large variations were observed within and between industries. Overall, stationary measurements showed less variation in performance compared to personal measurements. Different types of sensor seemed more accurate for specific industries. Contextual measurements provided additional information on when and where exposure occurred, for example by dynamic hazard maps based on indoor location and personal sensor measurements. Although performance of sensors remains lower than conventional methods, they may provide accurate measurements in specific situations. Additionally, sensors can provide new types of information that cannot be captured by time-integrated measurements.

AbstractIntroductionOil and gas workers have been shown to be at increased risk of chronic diseases including cancer, asthma, chronic obstructive pulmonary disease, and hearing loss, among others. Technological advances may be used to assess the external (e.g. personal sensors, smartphone apps and online platforms, exposure models) and internal exposome (e.g. physiologically based kinetic modeling (PBK), biomonitoring, omics), offering numerous possibilities for chronic disease prevention strategies and risk management measures. The objective of this study was to review the literature on these technologies, by focusing on: (i) evaluating their applicability for exposome research in the oil and gas industry, and (ii) identifying key challenges that may hamper the successful application of such technologies in the oil and gas industry.MethodA scoping review was conducted by identifying peer-reviewed literature with searches in MEDLINE/PubMed and SciVerse Scopus. Two assessors trained on the search strategy screened retrieved articles on title and abstract. The inclusion criteria used for this review were: application of the aforementioned technologies at a workplace in the oil and gas industry or, application of these technologies for an exposure relevant to the oil and gas industry but in another occupational sector, English language and publication period 2005—end of 2019.ResultsIn total, 72 articles were included in this scoping review with most articles focused on omics and bioinformatics (N = 22), followed by biomonitoring and biomarkers (N = 20), external exposure modeling (N = 11), PBK modeling (N = 10), and personal sensors (N = 9). Several studies were identified in the oil and gas industry on the application of PBK models and biomarkers, mainly focusing on workers exposed to benzene. The application of personal sensors, new types of exposure models, and omics technology are still in their infancy with respect to the oil and gas industry. Nevertheless, applications of these technologies in other occupational sectors showed the potential for application in this sector.Discussion and conclusionNew exposome technologies offer great promise for personal monitoring of workers in the oil and gas industry, but more applied research is needed in collaboration with the industry. Current challenges hindering a successful application of such technologies include (i) the technological readiness of sensors, (ii) the availability of data, (iii) the absence of standardized and validated methods, and (iv) the need for new study designs to study the development of disease during working life.

Abstract
Direct-reading, time-resolved devices, such as optical particle counters (OPCs) and photometers, offer a unique insight into the temporal and spatial distribution of airborne particles. They can provide a comprehensive picture of changes in concentration of airborne particles in occupational settings and therefore can be used to investigate failures in engineering control systems as well as identify exposures driven by working procedures and methods. In recent years, new developments have led to the commercialisation of low- cost optical-based sensors, which provide particle matter (PM) mass concentrations including PM2.5 and PM10 for environmental monitoring. TNO, NIOSH, and HSE are investigating their application to occupational settings with the aim to produce guidelines for calibration and use. This study evaluated the performance and accuracy of six commercially available low-cost sensors (Airbeam 2, Airveda, Omni Awair, OPC-N3, OPC-R1 and PATS+), in calm air test chambers, against reference devices including an Aerodynamic Particle Sizer (APS 3320), GK2.69 respirable cyclones, and pDR-1500 photometers. Several factors were considered: type of dust (particles having different size distribution, shape and refractive index), within- and between-device variations and exposure pattern (peak and constant concentrations). The devices were subjected to relatively high respirable concentrations (greater than 1 mg/m3) in addition to low concentrations. This presentation will present the results of the laboratory testing with particular focus on their accuracy, response, and calibration for quantitative exposure measurements. The low-cost sensor devices are also being deployed in the workplace for further evaluation and practicality of use.

The Vasilikos Energy Center (VEC) is a large hydrocarbon industrial hub actively operating in Cyprus. There is strong public interest by the communities surrounding VEC to engage with all stakeholders towards the sustainable development of hydrocarbon in the region. The methodological framework of the exposome concept would allow for the holistic identification of all relevant environmental exposures by engaging the most relevant stakeholders in industrially contaminated sites. The main objectives of this study were to: (i) evaluate the stakeholders' perceptions of the environmental and public health risks and recommended actions associated with the VEC hydrocarbon activities, and (ii) assess the stakeholders' understanding and interest towards exposome-based technologies for use in oil and gas applications. Methods: Six major groups of stakeholders were identified: local authorities, small-medium industries (SMIs) (including multi-national companies), small-medium enterprises (SMEs), academia/professional associations, government, and the general public residing in the communities surrounding the VEC. During 2019–2021, a suite of stakeholder engagement initiatives was deployed, including semi-structured interviews (n = 32), a community survey for the general public (n = 309), technical meetings, and workshops (n = 4). Results from the semi-structured interviews, technical meetings and workshops were analyzed through thematic analysis and results from the community survey were analyzed using descriptive statistics. Results: Almost all stakeholders expressed the need for the implementation of a systematic health monitoring system for the VEC broader area and its surrounding residential communities, including frequent measurements of air pollutant emissions. Moreover, stricter policies by the government about licensing and monitoring of hydrocarbon activities and proper communication to the public and the mass media emerged as important needs. The exposome concept was not practiced by the SMEs, but SMIs showed ...

AbstractLow-cost particulate matter (PM) sensors provide new methods for monitoring occupational exposure to hazardous substances, such as flour dust. These devices have many possible benefits, but much remains unknown about their performance for different exposure monitoring strategies in the workplace. We explored the performance of PM sensors for four different monitoring strategies (time-weighted average and high time resolution, each quantitative and semi-quantitative) for assessing occupational exposure using low-cost PM sensors in a field study in the industrial bakery sector. Measurements were collected using four types of sensor (PATS+, Isensit, Airbeam2, and Munisense) and two reference devices (respirable gravimetric samplers and an established time-resolved device) at two large-scale bakeries, spread over 11 participants and 6 measurement days. Average PM2.5 concentrations of the low-cost sensors were compared with gravimetric respirable concentrations for 8-h shift periods and 1-min PM2.5 concentrations of the low-cost sensors were compared with time-resolved PM2.5 data from the reference device (quantitative monitoring strategy). Low-cost sensors were also ranked in terms of exposure for 8-h shifts and for 15-min periods with a shift (semi-quantitative monitoring strategy). Environmental factors and methodological variables, which can affect sensor performance, were investigated. Semi-quantitative monitoring strategies only showed more accurate results compared with quantitative strategies when these were based on shift-average exposures. The main factors that influenced sensor performance were the type of placement (positioning the devices stationary versus personal) and the company or workstation where measurements were collected. Together, these findings provide an overview of common strengths and drawbacks of low-cost sensors and different ways these can be applied in the workplace. This can be used as a starting point for further investigations and the development of guidance documents and data analysis methods.

Background and aimThe Vasilikos Energy Center (VEC) is a large hydrocarbon industrial hub actively operating in Cyprus. There is strong public interest by the communities surrounding VEC to engage with all stakeholders towards the sustainable development of hydrocarbon in the region. The methodological framework of the exposome concept would allow for the holistic identification of all relevant environmental exposures by engaging the most relevant stakeholders in industrially contaminated sites. The main objectives of this study were to: (i) evaluate the stakeholders' perceptions of the environmental and public health risks and recommended actions associated with the VEC hydrocarbon activities, and (ii) assess the stakeholders' understanding and interest towards exposome-based technologies for use in oil and gas applications. Methods: Six major groups of stakeholders were identified: local authorities, small-medium industries (SMIs) (including multi-national companies), small-medium enterprises (SMEs), academia/professional associations, government, and the general public residing in the communities surrounding the VEC. During 2019–2021, a suite of stakeholder engagement initiatives was deployed, including semi-structured interviews (n = 32), a community survey for the general public (n = 309), technical meetings, and workshops (n = 4). Results from the semi-structured interviews, technical meetings and workshops were analyzed through thematic analysis and results from the community survey were analyzed using descriptive statistics. Results: Almost all stakeholders expressed the need for the implementation of a systematic health monitoring system for the VEC broader area and its surrounding residential communities, including frequent measurements of air pollutant emissions. Moreover, stricter policies by the government about licensing and monitoring of hydrocarbon activities and proper communication to the public and the mass media emerged as important needs. The exposome concept was not practiced by the SMEs, ...

Background: Prenatal exposure to organophosphate (OP) pesticides has been associated with altered neuronal cell development and behavioral changes in animal offspring. However, the few studies investigating the association between prenatal OP pesticide exposure and neurodevelopmental outcomes such as Attention-Deficit Hyperactivity Disorder (ADHD) and autistic traits in children produced mixed findings. Objective: The objective of the present study was to examine whether maternal urinary concentrations of OP pesticide metabolites are associated with ADHD and autistic traits in children participating in the Generation R Study, a population-based birth cohort from Rotterdam, the Netherlands. Method: Maternal concentrations of 6 dialkylphosphates (DAPs) were measured using gas chromatography coupled with tandem mass spectrometry in urine samples collected at 25 weeks of gestation in 784 mother-child pairs. DAP metabolite concentrations were expressed as molar concentrations divided by creatinine levels and log10 transformed. ADHD traits were measured at ages 3, 6, and 10 years using the Child Behavior Checklist (CBCL) (n = 781) and autistic traits were measured at age 6 years using the Social Responsiveness Scale (SRS) (n = 622). First, regression models were fit for the averaged prenatal exposure across pregnancy. Second, we investigated associations for each collection phase separately, and applied a mutually adjusted model in which the effect of prenatal DAP concentrations from each time period on ADHD and autistic traits were jointly estimated. All associations were adjusted for relevant confounders. Results: Median DAP metabolite concentration was 309 nmol/g creatinine at 25 weeks of gestation. Overall, DAP metabolite concentrations were not associated with ADHD traits. For instance, a log10 increase in averaged total DAP concentrations across gestation was not associated with a lower ADHD score (-0.03 per SD 95 CI: -0.28 to 0.23). Similarly, no associations between maternal DAP concentrations and autistic traits were detected. Conclusions: In this study of maternal urinary DAP metabolite concentrations during pregnancy, we did not observe associations with ADHD and autistic traits in children. These are important null observations because of the relatively high background DAP concentrations across pregnancy, the relatively large sample size, and the 10-year follow-up of the offspring. Given the measurement error inherent in our OP pesticide exposure biomarkers, future studies using more urine samples are needed to accurately measure OP pesticide exposure over pregnancy in relation to ADHD and autistic traits. ; This research received financial support from the National Institutes of Health Grants K12 ES019852 and P30 ES001247, and from the intramural research program of the National Institute of Environmental Health Sciences, National Institutes of Health. Henning Tiemeier was supported by a grant of the Netherlands Organization for Scientific Research (NWO grant No. 024.001.003, Consortium on Individual Development, and NWO/ZonMW grant 016.VICI.170.200). Mònica Guxens is funded by a Miguel Servet fellowship (MS13/00054, CPII18/00018) awarded by the Spanish Institute of Health Carlos III. ISGlobal is a member of the CERCA Programme, Generalitat de Catalunya. Dr. Hanan El Marroun was supported by Stichting Volksbond Rotterdam, the Dutch Brain Foundation (De Hersenstichting, project number GH2016.2.01) and the European Union's Horizon 2020 research and innovation programme (grant agreement No. 733206 LifeCycle).

Abstract
Diisocyanates are a group of chemicals that are widely used in occupational settings. They are known to induce various health effects, including skin- and respiratory tract sensitization resulting in allergic dermatitis and asthma. Exposure to diisocyanates has been studied in the past decades by using different types of biomonitoring markers and matrices. The aim of this review as part of the HBM4EU project was to assess: (i) which biomarkers and matrices have been used for biomonitoring diisocyanates and what are their strengths and limitations; (ii) what are (current) biomonitoring levels of the major diisocyanates (and metabolites) in workers; and (iii) to characterize potential research gaps. For this purpose we conducted a systematic literature search for the time period 2000–end 2018, thereby focussing on three types of diisocyanates which account for the vast majority of the total isocyanate market volume: hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), and 4,4′-methylenediphenyl diisocyanate (MDI). A total of 28 publications were identified which fulfilled the review inclusion criteria. The majority of these studies (93%) investigated the corresponding diamines in either urine or plasma, but adducts have also been investigated by several research groups. Studies on HDI were mostly in the motor vehicle repair industry [with urinary hexamethylene diamine result ranging from 0.03 to 146.5 µmol mol−1 creatinine]. For TDI, there is mostly data on foam production [results for urinary toluene diamine ranging from ~0.01 to 97 µmol mol−1 creatinine] whereas the available MDI data are mainly from the polyurethane industry (results for methylenediphenyl diamine range from 0.01 to 32.7 µmol mol−1 creatinine). About half of the studies published were prior to 2010 hence might not reflect current workplace exposure. There is large variability within and between studies and across sectors which could be potentially explained by several factors including worker or workplace variability, short half-lives of biomarkers, and differences in sampling strategies and analytical techniques. We identified several research gaps which could further be taken into account when studying diisocyanates biomonitoring levels: (i) the development of specific biomarkers is promising (e.g. to study oligomers of HDI which have been largely neglected to date) but needs more research before they can be widely applied, (ii) since analytical methods differ between studies a more uniform approach would make comparisons between studies easier, and (iii) dermal absorption seems a possible exposure route and needs to be further investigated. The use of MDI, TDI, and HDI has been recently proposed to be restricted in the European Union unless specific conditions for workers' training and risk management measures apply. This review has highlighted the need for a harmonized approach to establishing a baseline against which the success of the restriction can be evaluated.