Suchergebnisse

The authors thank V. Kuzovkov, A. Lushchik and M. Lushchik for many useful discussions. The research was (partly) performed in the Institute of Solid State Physics, University of Latvia ISSP UL. ISSP UL as the Center of Excellence is supported through the Framework Program for European universities Union Horizon 2020, H2020-WIDESPREAD-01–2016–2017-TeamingPhase2 under Grant Agreement No. 739508, CAMART2 project. ; The unique properties and numerous applications of nanocrystalline titanium dioxide (TiO2) are stimulating research on improving the existing and developing new titanium dioxide synthesis methods. In this work, we demonstrate for the first time the possibilities of the extraction–pyrolytic method (EPM) for the production of nanocrystalline TiO2 powders. A titanium-containing precursor (extract) was prepared by liquid–liquid extraction using valeric acid C4H9COOH without diluent as an extractant. Simultaneous thermogravimetric analysis and differential scanning calorimetry (TGA–DSC), as well as the Fourier-transform infrared (FTIR) spectroscopy were used to determine the temperature conditions to fabricate TiO2 powders free of organic impurities. The produced materials were also characterized by X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM). The results showed the possibility of the fabrication of storage-stable liquid titanium (IV)-containing precursor, which provided nanocrystalline TiO2 powders. It was established that the EPM permits the production of both monophase (anatase polymorph or rutile polymorph) and biphase (mixed anatase–rutile polymorphs), impurity-free nanocrystalline TiO2 powders. For comparison, TiO2 powders were also produced by the precipitation method. The results presented in this study could serve as a solid basis for further developing the EPM for the cheap and simple production of nanocrystalline TiO2-based materials in the form of doped nanocrystalline powders, thin films, and composite materials. This work is licensed under a CC BY 4.0 license. ; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART².

We are grateful to Prof. E. Kotomin for useful discussions. The research leading to these results has received funding from the ERAF (2017) Project, while A. I. Popov thanks IMIS-2 for the funding support. ; In the present work, possibilities of the extraction–pyrolysis method (EPM) to produce FePt nanoparticles with the face-centered tetragonal (fct) phase were studied. A mixture of fine-disperse powder of carbonyl iron and n-trioctylam-monium hexachloroplatinate [(С8Н17)3NH]2PtCl6 solution in toluene, preliminary produced by the solvent extraction method, is used as a precursor. Precursors with a different molar ratio of metals were used. The performed investigations show that as a result of pyrolysis in the air (Tpyr = 600°C, tanneal = 30 min), a FePt alloy with the fct phase is produced. Moreover, such phases as FePt3 and/or Fe3Pt with the cubic structure may be also present in the final products. The phase composition of the produced samples depends on the Fe:Pt molar ratio in the precursor. An increase of the fct phase part with the growth of the iron content from 40 to 60 mol% is observed. Also, with the Fe80%Pt20% molar ratio of the metals in the precursor, only the ordered fct phase along with a small amount of hematite and iron chloride exists in the produced sample. Magnetic measurements confirm the fct-FePt phase formation in all produced samples and evidence that the coercivity exceeds the value (3 kOe) at the 50 mol% Fe concentration in the precursor and significantly decreases with increasing the Fe concentration to 80 mol%. ; ERAF; IMIS-2; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²

The work has been done in frame of the TransFerr project. It has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 778070. This research was also supported by Latvian Research Council project lzp-2018/1-0214. A.I.P. appreciates support from the Estonian Research Council grant (PUT PRG619). ; Interest in magnetic nanoparticles is primarily due to their practical use. In this work, for the production of nanocrystalline powders of pure and gadolinium doped iron oxides, the extraction-pyrolytic method (EPM) was used. As a precursor, either iron-containing extract (iron (III) caproate in caproic acid) or its mixture with gadolinium-containing extract (gadolinium (III) valerate in valeric acid) was used. The mixed precursor contained 0.5 mol %, 2.5 mol %, 12.5 mol %, 50 mol %, and 75 mol % gadolinium in relation to the iron content. The formation of iron oxide phases, depending on the preparation conditions, was investigated. According to the results obtained, it was demonstrated that the presence of more than 2.5 mol % gadolinium additive in the mixed precursor inhibits the magnetite-to-hematite transformation process during thermal treatment. Produced samples were characterized by XRD and SEM methods, and the magnetic properties were studied. ; H2020 Marie Sklodowska-Curie grant agreement No. 778070; Latvian Science Council project lzp-2018/1-0214; Estonian Research Council grant (PUT PRG619); Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART²