Suchergebnisse

Abstract. Current drought monitoring and early warning systems use different indicators for monitoring drought conditions and apply different indicator thresholds and rules for assigning drought intensity classes or issue warnings or alerts. Nevertheless, there is little knowledge on the meaning of different hydro-meteorologic indicators for impact occurrence on the ground. To date, there have been very few attempts to systematically characterize the indicator–impact relationship owing to sparse and patchy data on drought impacts. The newly established European Drought Impact report Inventory (EDII) offers the possibility to investigate this linkage. The aim of this study was to explore the link between hydro-meteorologic indicators and drought impacts for the case study area Germany and thus to test the potential of qualitative impact data for evaluating the performance of drought indicators. As drought indicators two climatological drought indices – the Standardized Precipitation Index (SPI) and the Standardized Precipitation Evapotranspiration Index (SPEI) – as well as streamflow and groundwater level percentiles were selected. Linkage was assessed though data visualization, extraction of indicator values concurrent with impact onset, and correlation analysis between monthly time series of indicator and impact data at the federal state level, and between spatial patterns for selected drought events. The analysis clearly revealed a significant moderate to strong correlation for some states and drought events allowing for an intercomparison of the performance of different drought indicators. Important findings were strongest correlation for intermediate accumulation periods of SPI and SPEI, a slightly better performance of SPEI versus SPI, and a similar performance of streamflow percentiles to SPI in many cases. Apart from these commonalities, the analysis also exposed differences among federal states and drought events, suggesting that the linkage is time variant and region specific to some degree. Concerning "thresholds" for drought impact onset, i.e. indicator values concurrent with past impact onsets, we found that no single "best" threshold value can be identified but impacts occur within a range of indicator values. Nevertheless, the median of the threshold distributions showed differences between northern/northeastern versus southern/southwestern federal states, and among drought events. While the findings strongly depend on data and may change with a growing number of EDII entries in the future, this study clearly demonstrates the feasibility of evaluating hydro-meteorologic variables with text-based impact reports and highlights the value of impact reporting as a tool for monitoring drought conditions.

Im Rahmen des Verbundprojekts "massiverLeichtbau" (AiF-KZ47M4712) wurde als Beitrag zur Gewichtsreduktion von Antriebsstrangkomponenten am Institut für Umformtechnik (IFU) in Stuttgart und an der Forschungsstelle für Zahnräder und Getriebebau (FZG) in München das Verfahrenskonzept zur umformtechnischen Herstellung von "gebauten" Zahnrädern mittels Querfließpressen in Mehrkomponentenbauweise entwickelt und dessen Leichtbaupotenzial untersucht. Dieses Verfahren erlaubt das form- und/oder reibschlüssige Fügen von Zahnkranz, Zahnradkörper und Welle und erlaubt so eine kompakte, gewichtsoptimierte Bauweise solcher Zahnräder. Zur Quantifizierung des Anwendungspotenzials von gebauten Zahnrädern mittels Umformfügen wurden die Einflüsse des Werkstoffs, des Umformschmierstoffs und der Zahnkranzinnengeometrie auf das übertragbare Drehmoment gezeigt. Das Ziel der experimentellen Untersuchungen lag einerseits in der Ermittlung der Versagensart unter Torsionslast und schließlich in der Bestimmung einer optimalen Kombination aus Werkstoff, Umformschmierstoff und Zahnkranzinnenprofil zur Übertragung möglichst hoher Drehmomente. Die hier dargestellten Ergebnisse sowie einzelne Textpassagen stammen aus dem AiF-Abschlussbericht sowie einer vorangehenden Veröffentlichung [12].
 
In order to reduce the weight of powertrain components, the manufacturing process concept for joining by forming of "built" gears using lateral extrusion in multi-component design is being developed and the lightweight potential is being investigated. This paper deals with the manufacturing of an assembled gearwheel using cold forging and simultaneously joining the gearwheel body with a gear ring. The aim of this publication is to demonstrate the influence of the material, the lubricant and the geometry of the inner gear ring on the transmittable torsional load based on built gears manufactured by joining by forming. The aim of the experimental investigations was on the one hand to determine the type of failure under torsional load and finally to determine an optimal configuration of material, lubricant and internal gear ring profile for the transmission of preferably high torques. The here presented results and individual text passages originate from the AiF final report [14] and a prior publication [12].

In recent years Switzerland has experienced some unprecedented drought situations. At a political level solutions have been requested for early recognition of hydrological droughts. A prototype information platform has been developed to guide water resources management during situations where water resources drop below critical levels. The development was steered by stakeholders from national administrations and different economic sectors. Since June 2013 the platform has presented daily updated real-time information on several drought indicators including precipitation, streamflow, lake levels, groundwater levels, soil moisture deficit, snow resources, dryness in forests and stream temperatures. For three basins, ensemble forecasts of runoff, soil moisture, snowpack and groundwater storage have been provided. Furthermore, a nationwide operational hydrological simulation at 600 × 600 m resolution gives indications on local water resources deficits. Information for each variable has been used to create automatic "awareness maps" for nine large regions. Three levels of information with increasing detail and complexity can be accessed by over 180 registered users. The operators of the platform give interpreted comments on the content of the platform each week-day. The test phase of the platform will last until the end of 2014.

In recent years Switzerland has experienced some unprecedented drought situations. At a political level solutions have been requested for early recognition of hydrological droughts. A prototype information platform has been developed to guide water resources management during situations where water resources drop below critical levels. The development was steered by stakeholders from national administrations and different economic sectors. Since June 2013 the platform has presented daily updated real-time information on several drought indicators including precipitation, streamflow, lake levels, groundwater levels, soil moisture deficit, snow resources, dryness in forests and stream temperatures. For three basins, ensemble forecasts of runoff, soil moisture, snowpack and groundwater storage have been provided. Furthermore, a nationwide operational hydrological simulation at 600 × 600 m resolution gives indications on local water resources deficits. Information for each variable has been used to create automatic "awareness maps" for nine large regions. Three levels of information with increasing detail and complexity can be accessed by over 180 registered users. The operators of the platform give interpreted comments on the content of the platform each week-day. The test phase of the platform will last until the end of 2014.

Rift Valley fever (RVF) is a vector-borne disease transmitted by a broad spectrum of mosquito species, especially Aedes and Culex genus, to animals (domestic and wild ruminants and camels) and humans. Rift Valley fever is endemic in sub-Saharan Africa and in the Arabian Peninsula, with periodic epidemics characterised by 5–15 years of inter-epizootic periods. In the last two decades, RVF was notified in new African regions (e.g. Sahel), RVF epidemics occurred more frequently and low-level enzootic virus circulation has been demonstrated in livestock in various areas. Recent outbreaks in a French overseas department and some seropositive cases detected in Turkey, Tunisia and Libya raised the attention of the EU for a possible incursion into neighbouring countries. The movement of live animals is the most important pathway for RVF spread from the African endemic areas to North Africa and the Middle East. The movement of infected animals and infected vectors when shipped by flights, containers or road transport is considered as other plausible pathways of introduction into Europe. The overall risk of introduction of RVF into EU through the movement of infected animals is very low in all the EU regions and in all MSs (less than one epidemic every 500 years), given the strict EU animal import policy. The same level of risk of introduction in all the EU regions was estimated also considering the movement of infected vectors, with the highest level for Belgium, Greece, Malta, the Netherlands (one epidemic every 228–700 years), mainly linked to the number of connections by air and sea transports with African RVF infected countries. Although the EU territory does not seem to be directly exposed to an imminent risk of RVFV introduction, the risk of further spread into countries neighbouring the EU and the risks of possible introduction of infected vectors, suggest that EU authorities need to strengthen their surveillance and response capacities, as well as the collaboration with North African and Middle Eastern countries.

Rift Valley fever (RVF) is a vector‐borne disease transmitted by a broad spectrum of mosquito species, especially Aedes and Culex genus, to animals (domestic and wild ruminants and camels) and humans. Rift Valley fever is endemic in sub‐Saharan Africa and in the Arabian Peninsula, with periodic epidemics characterised by 5–15 years of inter‐epizootic periods. In the last two decades, RVF was notified in new African regions (e.g. Sahel), RVF epidemics occurred more frequently and low‐level enzootic virus circulation has been demonstrated in livestock in various areas. Recent outbreaks in a French overseas department and some seropositive cases detected in Turkey, Tunisia and Libya raised the attention of the EU for a possible incursion into neighbouring countries. The movement of live animals is the most important pathway for RVF spread from the African endemic areas to North Africa and the Middle East. The movement of infected animals and infected vectors when shipped by flights, containers or road transport is considered as other plausible pathways of introduction into Europe. The overall risk of introduction of RVF into EU through the movement of infected animals is very low in all the EU regions and in all MSs (less than one epidemic every 500 years), given the strict EU animal import policy. The same level of risk of introduction in all the EU regions was estimated also considering the movement of infected vectors, with the highest level for Belgium, Greece, Malta, the Netherlands (one epidemic every 228–700 years), mainly linked to the number of connections by air and sea transports with African RVF infected countries. Although the EU territory does not seem to be directly exposed to an imminent risk of RVFV introduction, the risk of further spread into countries neighbouring the EU and the risks of possible introduction of infected vectors, suggest that EU authorities need to strengthen their surveillance and response capacities, as well as the collaboration with North African and Middle Eastern countries.