Suchergebnisse

Li-O2 batteries can offer large discharge capacities, but this depends on the morphology of the discharged Li2O2, which in turn is strongly affected by the nanostructured carbon used as support in the air cathode. However, the relation with the textural parameters is complex. To investigate the combined effect of channels of different sizes, meso-macroporous carbons with similar mesopore volume but different pore size distribution were prepared from the polymerization of resorcinol-formaldehyde (RF) in the presence of surfactants and micro-CaCO3 particles. The carbon materials were used as active materials of air cathodes flooded by ionic liquid-based electrolytes in Li-O2 cells with two different configurations, one with a static electrolyte and the other with a stirred electrolyte, which favor a film-like and large particle deposition, respectively. The presence of large pores enhances the discharge capacity with both mechanisms. Conversely, with respect to the reversible capacity, the trend depends on the cell configuration, with macroporosity favoring better performance with static, but poorer with stirred electrolytes. However, all mesoporous carbons demonstrated larger reversible capacity than a purely macroporous electrode made of carbon black. These results indicate that in addition to pore volume, a proper arrangement of large and small pores is important for discharge capacity, while an extended interface can enhance reversibility in Li–O2 battery cathodes. ; This research was supported by the Spanish Government, through the "Severo Ochoa" Programme for Centers of Excellence in R&D (SEV- 2015-0496), and through the projects MAT2015-64442-R and MAT2015-68394-R with FEDER co-funding; the European Commission (contract no. 265971 "Lithium-Air Batteries with split Oxygen Harvesting and Redox processes, LABOHR)". M.O. acknowledges CSIC for a JAE-DOC research contract cofinanced by European Social Fund. ; Peer reviewed

Porous carbons are important cathode materials for metal-air batteries, but the most usual methods to prepare these porous structures are complex and of high cost. We have prepared porous carbons from bacterial cellulose (BC) hydrogels by a simple water-alcohol solvent exchange before carbonization. Alcohol treatment facilitates looser and more open structures than untreated BC, resulting in porous carbon structures with high surface area, appropriate for electrochemical applications. Used as cathodes in lithium-oxygen batteries, the carbon derived from 1-butanol treated BC has excellent discharge capacity (5.6 mA h cm−2) and good cycle life. This work presents a sustainable, straightforward and fast way to prepare porous carbon materials from BC. ; This research was supported by the Spanish Government, through the "Severo Ochoa" Programme for Centers of Excellence in R&D (CEX2019-000917-S), the projects MAT2017-91404-EXP and RTI2018-096273-B-I00 and the PhD scholarships of S. R. (BES-2016-077533) with FEDER co-funding. W.W. gratefully acknowledges the support from the China Scholarship Council (CSC No.:201808340076). The authors participate in the SusPlast and FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC) and in the Aerogels COST ACTION (CA 18125). They also acknowledge the Generalitat de Catalunya (2017SGR765 and 2017SGR1687 grants). This work has been performed within the framework of the doctoral program in materials science of UAB (W. W. and S.R–S.) ; Peer reviewed

The use of slurries of conducting particles has been considered a way to extend the electrode area in some energy storage electrochemical cells. When suspensions of conducting particles are used in electrolytes a decreased impedance is observed, even for concentrations much lower than the theoretical percolation limits. Indeed, it is known that polarization occurs when a conducting material is immersed in an electrolyte in presence of electric fields, and bipolar electrochemistry processes may occur. This work demonstrates the dramatic drop in resistance for electrochemical cells with just a few macroscopic conducting pieces immersed in the electrolyte, in the absence of any electrical contact, through bipolar induction. Furthermore, mediation of soluble redox species between adjacent induced poles of opposite charge results in an additional mechanism for charge transfer, contributing further to the decrease in impedance. Relevant parameters like size, geometry, and spatial occupation of inducible pieces within the electric field, are relevant. Remarkably, the effects observed can explain some empirical observations previously reported for carbon suspensions and slurries. Thus, no electronic percolation requiring particle contact, nor ordering, are needed to explain the good performance associated to lowered impedance These results suggest new engineering designs for electrochemical cells with enhanced currents. ; The authors thank financing from the Ministry of Science of Spain (MAT2015-65192-R, and RTI2018-097753-B-I00, RTI2018-099826-B-I00, MAT2017-91404-EXP), and Severo Ochoa Program (SEV-2015-0496 and CEX2019-000917-S). LLA thanks the Ramon y Cajal Program contract (RYC-2013-12640). ; With funding from the Spanish government through the 'Severo Ochoa Centre of Excellence' accreditation (CEX2019-000917-S). ; Peer reviewed

Energy-dependent full field transmission soft X-ray microscopy (TXM) is able to give a full picture at the nanometer scale of the chemical state and spatial distribution of oxygen and other elements relevant for battery materials, providing pixel-by-pixel absorption spectrum. We show different methods to localize chemical inhomogeneities in Li1.2Mn0.56Ni0.16Co0.08O2 particles with and without VOx coating extracted from electrodes at different states of charge. Considering the 3d(Mn,Ni)-2p(O) hybridization, it has been possible to discriminate the chemical state of Mn and Ni in addition to the one of O. Different oxidation states correspond to specific features in the O-K spectra. To localize sample regions with specific compositions we apply two different methods. In the first, the pixel-by-pixel ratios of images collected at different key energies clearly highlight local inhomogeneities. In the second, introduced here for the first time, we directly correlate corresponding pixels of the two images on a xy scatter plot that we call phase map, where we can visualize the distributions as function of thickness as well as absorption artifacts. We can select groups of pixels, and then map regions with similar spectral features. Core-shell distributions of composition are clearly shown in these samples. The coating appears in part to frustrate some of the usual chemical evolution. In addition, we could directly observe several further aspects, such as: distribution of conducting carbon; inhomogeneous state of charge within the electrode; molecular oxygen profiles within a particle. The latter suggests a surface loss with respect to the bulk but an accumulation layer at intermediate depth that could be assigned to retained O2. ; This research was funded by Spanish Government, through the "Severo Ochoa" Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00 and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association. ; Peer reviewed