Suchergebnisse

We have studied experimentally jump-to-contact (JC) and jump-out-of-contact (JOC) phenomena in gold electrodes. JC can be observed at first contact when two metals approach each other, while JOC occurs in the last contact before breaking. When the indentation depth between the electrodes is limited to a certain value of conductance, a highly reproducible behaviour in the evolution of the conductance can be obtained for hundreds of cycles of formation and rupture. Molecular dynamics simulations of this process show how the two metallic electrodes are shaped into tips of a well-defined crystallographic structure formed through a mechanical annealing mechanism. We report a detailed analysis of the atomic configurations obtained before contact and rupture of these stable structures and obtained their conductance using first-principles quantum transport calculations. These results help us understand the values of conductance obtained experimentally in the JC and JOC phenomena and improve our understanding of atomic-sized contacts and the evolution of their structural characteristics ; This work was supported by the Spanish government through grants FIS2010-21883, CONSOLIDER CSD2007-0010, Generalitat Valenciana through PROMETEO/2012/011, ACOMP/2012/127 and Feder funds from E.U.

The electronic gap structure of the organic molecule N,N′-diphenyl-N,N′-bis(3-methylphenyl)-(1,1′-biphenyl)-4,4′-diamine, also known as TPD, has been studied by means of a Scanning Tunneling Microscope (STM) and by Photoluminescence (PL) analysis. Hundreds of current-voltage characteristics measured at different spots of the sample show the typical behavior of a semiconductor. The analysis of the curves allows to construct a gap distribution histogram which reassembles the PL spectrum of this compound. This analysis demonstrates that STM can give relevant information, not only related to the expected value of a semiconductor gap but also on its distribution which affects its physical properties such as its PL. ; We acknowledge financial support of the Spanish Government (Grant Nos. FIS2010-21883-C02-01, MAT2011-28167-C02-01, and No. CONSOLIDER CSD2007-0010) and Comunidad Valenciana (ACOMP/2012/127 and PROMETEO/2012/011). This research has been partial funded by FEDER funds of the EU.

The process of creating an atomically defined and robust metallic tip is described and quantified using measurements of contact conductance between gold electrodes and numerical simulations. Our experiments show how the same conductance behavior can be obtained for hundreds of cycles of formation and rupture of the nanocontact by limiting the indentation depth between the two electrodes up to a conductance value of approximately 5G0 in the case of gold. This phenomenon is rationalized using molecular dynamics simulations together with density functional theory transport calculations which show how, after repeated indentations (mechanical annealing), the two metallic electrodes are shaped into tips of reproducible structure. These results provide a crucial insight into fundamental aspects relevant to nanotribology or scanning probe microscopies. ; This work was supported by the Spanish government through Grants No. FIS2010-21883 and No. CONSOLIDER CSD2007-0010.

Using a scanning tunnel microscope or mechanically controllable break junctions atomic contacts for Au, Pt, and Ir are pulled to form chains of atoms. We have recorded traces of conductance during the pulling process and averaged these for a large number of contacts. An oscillatory evolution of conductance is observed during the formation of the monoatomic chain suggesting a dependence on the numbers of atoms forming the chain being even or odd. This behavior is not only observed for the monovalent metal Au, as was predicted, but is also found for the other chain-forming metals, suggesting it to be a universal feature of atomic wires. ; This work is part of the research program of the "Stichting FOM." G. R. acknowledges support of the Spanish DGI by the Project No. MAT 2001-1281. C.U. has been supported by the European Union under Contract No. HPMF-CT-2000-00724.

The magnetization reversal of two-dimensional arrays of parallel ferromagnetic Fe nanowires embedded in nanoporous alumina templates has been studied. By combining bulk magnetization measurements (superconducting quantum interference device magnetometry) with field-dependent magnetic force microscopy (MFM), we have been able to decompose the macroscopic hysteresis loop in terms of the irreversible magnetic responses of individual nanowires. The latter are found to behave as monodomain ferromagnetic needles, with hysteresis loops displaced (asymmetric) as a consequence of the strong dipolar interactions between them. The application of field-dependent MFM provides a microscopic method to obtain the hysteresis curve of the array, by simply registering the fraction of up and down magnetized wires as a function of applied field. The observed deviations from the rectangular shape of the macroscopic hysteresis loop of the array can be ascribed to the spatial variation of the dipolar field through the inhomogeneously filled membrane. The system studied proves to be an excellent example of the two-dimensional classical Preisach model, well known from the field of hysteresis modeling and micromagnetism. ; This work was part of the research program of the Stichting voor Fundamenteel Onderzoek der Materie (FOM), which is supported by the Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NOW). C.U. and F.L. acknowledge grants funded by the European Union in the framework of its TMR Marie Curie Program. M.K. acknowledges a grant funded by Deutsche Forschungsgemeinschaft (DFG).

Our analysis of the contact formation processes undergone by Au, Ag, and Cu nanojunctions reveals that the distance at which the two closest atoms on a pair of opposing electrodes jump into contact is, on average, 2 times longer for Au than either Ag or Cu. This suggests the existence of a longer-range interaction between those two atoms in the case of Au, a result of the significant relativistic energy contributions to the electronic structure of this metal, as confirmed by ab initio calculations. Once in the contact regime, the differences between Au, Ag, and Cu are subtle, and the conductance of single-atom contacts for metals of similar chemical valence is mostly determined by geometry and coordination. ; This work has been funded by the Spanish Government through Grants No. FIS2013-47328 and No. MAT2016-78625 and the Conselleria d'Educació, Investigació, Cultura i Esport de la Generalitat Valenciana, PROMETEO/2017/139. C. S. gratefully acknowledges financial support from SEPE Servicio Público de Empleo Estatal. W. D. acknowledges funding from the National Research Foundation of South Africa through the Innovation Doctoral scholarship programme, Grant No. UID 102574.

The formation and rupture of atomic-sized contacts is modelled by means of molecular dynamics simulations. Such nano-contacts are realized in scanning tunnelling microscope and mechanically controlled break junction experiments. These instruments routinely measure the conductance across the nano-sized electrodes as they are brought into contact and separated, permitting conductance traces to be recorded that are plots of conductance versus the distance between the electrodes. One interesting feature of the conductance traces is that for some metals and geometric configurations a jump in the value of the conductance is observed right before contact between the electrodes, a phenomenon known as jump-to-contact. This paper considers, from a computational point of view, the dynamics of contact between two gold nano-electrodes. Repeated indentation of the two surfaces on each other is performed in two crystallographic orientations of face-centred cubic gold, namely (001) and (111). Ultimately, the intention is to identify the structures at the atomic level at the moment of first contact between the surfaces, since the value of the conductance is related to the minimum cross-section in the contact region. Conductance values obtained in this way are determined using first principles electronic transport calculations, with atomic configurations taken from the molecular dynamics simulations serving as input structures. ; W. Dednam acknowledges support from the National Research Foundation of South Africa through the Scarce Skills Masters scholarship funding programme. This work is supported by the Generalitat Valenciana through grant reference PROMETEO2012/011 and the Spanish government through grant FIS2010-21883. This work is part of the research programme of the Foundation for Fundamental Research on Matter (FOM), which is financially supported by the Netherlands Organisation for Scientific Research (NWO).

The conductance across an atomically narrow metallic contact can be measured by using scanning tunneling microscopy. In certain situations, a jump in the conductance is observed right at the point of contact between the tip and the surface, which is known as "jump to contact" (JC). Such behavior provides a way to explore, at a fundamental level, how bonding between metallic atoms occurs dynamically. This phenomenon depends not only on the type of metal but also on the geometry of the two electrodes. For example, while some authors always find JC when approaching two atomically sharp tips of Cu, others find that a smooth transition occurs when approaching a Cu tip to an adatom on a flat surface of Cu. In an attempt to show that all these results are consistent, we make use of atomistic simulations; in particular, classical molecular dynamics together with density functional theory transport calculations to explore a number of possible scenarios. Simulations are performed for two different materials: Cu and Au in a [100] crystal orientation and at a temperature of 4.2 K. These simulations allow us to study the contribution of short- and long-range interactions to the process of bonding between metallic atoms, as well as to compare directly with experimental measurements of conductance, giving a plausible explanation for the different experimental observations. Moreover, we show a correlation between the cohesive energy of the metal, its Young's modulus, and the frequency of occurrence of a jump to contact. ; W. Dednam acknowledges support from the National Research Foundation of South Africa through the Scarce Skills Masters scholarship funding programme (Grant Unique Number 92138). This work is supported by the Generalitat Valenciana through Grant Reference PROMETEO2012/011 and MINECO under Grant No. FIS2013-47328, by European Union structural funds and the Comunidad de Madrid Programs S2013/MIT-3007 and P2013/MIT-2850. This work is also part of the research programme of the Foundation for Fundamental Research on Matter (FOM), which is financially supported by the Netherlands Organisation for Scientific Research (NWO).

Atomic-sized contacts of iron, created in scanning tunneling microscope break junctions, present unusually high values of conductance compared to other metals. This result is counterintuitive since, at the nanoscale, body-centered-cubic metals are expected to exhibit lower coordination than face-centered-cubic metals. In this work we first perform classical molecular dynamics simulations of the contact rupture, using two different interatomic potentials. The first potential is isotropic, and produces mostly single-atom prerupture contacts. The second potential accounts for the directional bonding in the materials, and produces mostly highly coordinated prerupture structures, generally consisting of more than one atom in contact. To compare the two different types of structures with experiments, we use them as input to density functional theory electronic transport calculations of the conductance. We find that the highly coordinated structures, obtained from the anisotropic potential, yield higher conductances which are statistically in better agreement with those measured for body-centered-cubic iron. We thus conclude that the directional bonding plays an important role in body-centered-cubic metals. ; This work was supported by the Generalitat Valenciana through PROMETEO2017/139 and GENT (CDEIGENT2018/028), the Spanish government through Grants No. MAT2016-78625-C2-1-P and No. FIS2016-80434-P, and the Spanish Ministry of Science and Innovation, through the "María de Maeztu" Programme for Units of Excellence in R&D (CEX2018-000805-M), by Comunidad Autónoma de Madrid through Grant No. S2018/NMT-4321 (NanomagCOST-CM), by the Fundación Ramón Areces, and by the European Union Graphene Flagship under Grant No. 604391.

Graphite surfaces can be manipulated by several methods to create graphene structures of different shapes and sizes. Scanning tunneling microscopy (STM) can be used to create these structures either through mechanical contact between the tip and the surface or through electro-exfoliation. In the latter, the mechanisms involved in the process of exfoliation at an applied voltage are not fully understood. Here, we show how a graphite surface can be locally exfoliated in a systematic manner by applying an electrostatic force with a STM tip at the edge of a terrace, forming triangular flakes several nanometers in length. We demonstrate, through experiments and simulations, how these flakes are created by a two-step process: first a voltage ramp must be applied at the edge of the terrace, and then the tip must be scanned perpendicular to the edge. Ab initio electrostatic calculations reveal that the presence of charges on the graphite surface weakens the interaction between layers allowing for exfoliation at voltages in the same range as those used experimentally. Molecular dynamics simulations show that a force applied locally on the edge of a step produces triangular flakes such as those observed under STM. Our results provide new insights into surface modification that can be extended to other layered materials. ; GSA acknowledges the support of the CONICIT Costa Rica and Universidad Nacional de Costa Rica. This work was supported by the Generalitat Valenciana through grant references PROMETEO2012/011 and FPA/2013/A/081 and the Spanish government MINECO through grants FIS2010-21883, FIS2013-47328, MAT2016-78625-C2-1-P. JJP acknowledges financial support through the "María de Maeztu" Programme for Units of Excellence in R&D (MDM-2014-0377) and grant FIS2016-80434 from MINECO, the European Union structural funds and the Comunidad de Madrid under grant MAD2D no. S2013/MIT-3007.