Produttività e cambiamento nell'industria italiana: indagini quantitative
In: Percorsi
235 Ergebnisse
Sortierung:
In: Percorsi
In: Istituto di Richerche Economico-Aziendali, Università degli Studi di Torino, [Pubblicazioni] Ser. 1,2
In: Economia e politica industriale 149
In: Strumenti., Scienze sociali
Ad oggi numerose resistenze dibattono sull'adozione di schemi di pricing nei centri urbani dalla presunta iniquità, che renderebbero di fatto accessibili i centri urbani soltanto a coloro che possono permettersi di pagare la tariffa di accesso. Ma al contempo l'evoluzione di tecnologie innovative di rilevamento e di infomobilità consentono di ipotizzare un completo ribaltamento dei criteri di tassazione del traffico stradale, dove il carico fiscale potrebbe essere rimodulato in relazione agli effettivi comportamenti di ogni singolo utente. L'obiettivo è stato quello di controllare e limitare la mobilità all'interno di una determinata area urbana attraverso un nuovo modo di concepire le ZTL (Zone a Traffico Limitato). Si è pertanto condotta un'applicazione sul caso studio della città di Palermo che vede l'interazione di un modello di domanda che contempla i modi auto privata, car pooling, car sharing e bus con un modello di offerta attento alle politiche di sostenibilità del sistema di trasporto. L'applicazione prevede la tariffazione della sosta in un area del centro urbano che allo stesso tempo è oggetto di interventi di traffic calming, pedonalizzazione e, soprattutto, di potenziamento del trasporto pubblico e di incentivazione della modalità sharing. Il risultato è la definizione di un piano di tariffazione ottimale che, non precludendo a priori l'uso dell'infrastruttura viaria, riesce a shiftare un'interessante aliquota della domanda di spostamento verso il trasporto pubblico locale.
BASE
A seguito della crisi del 2007/08 il sistema finanziario è apparso a tutti non più in grado di adempiere le sue funzioni elementari, trascinando il mondo nel baratro di una depressione stile anni Trenta. La Grande Recessione ha imposto al mondo intero una riflessione: da un lato ha fatto riemergere posizioni critiche nei confronti della finanza e sulle modalità in cui questa si sia nel tempo affermata nel secolo scorso, e dall'altro si è avvertito il bisogno di una revisione delle regole e modalità di supervisione in modo da renderla più reale, più umana. La crisi americana, ma sopratutto le crisi europee hanno favorito un ripensamento sia degli assetti posti a presidio della stabilità, sia del ruolo delle Banche centrali. Il crollo dell'alta finanza e il forte tasso di disoccupazione hanno richiesto una riaffermazione della flessibilità della politica monetaria e l'attribuzione alle Autorità centrali di maggiori responsabilità nella cura dei meccanismi finanziari. La crisi ha inciso sul modo tradizionale di fare Central Banking, giungendo all'adozione di misure non convenzionali come il Quantitative Easing, che adottato prima negli Stati Uniti e poi da meno di un'anno in Europa ha prodotto effetti particolari ed accomodanti. Vengono quindi indagati gli strumenti convenzionali e non convenzionali adottati dalle Banche centrali, nonchè l'evoluzione storica, istituzionale e giuridica che ha condotto al nuovo modello di Central Banking. Viene rivolta poi, una particolare attenzione alla trasformazione della crisi da bancaria in crisi del debito sovrano, tenendo conto delle differenti condizioni politiche istituzionali presenti in Europa. Esaminando cosa si è fatto e cosa ancora si sta facendo per salvare l'euro.
BASE
In: Studi economici e sociali Carocci 55
In: Il terzo Mezzogiorno 2
Con Quantitative Easing, in italiano alleggerimento o allentamento quantitativo, o anche facilitazione quantitativa, si designa una delle modalità con cui avviene la creazione di moneta da parte della banca centrale e la sua iniezione, con operazioni di mercato aperto, nel sistema finanziario ed economico. In particolare è definita come una "politica monetaria non convenzionale" con cui una banca centrale acquista titoli di Stato o altri titoli (anche tossici, "junk bond") dal mercato al fine di abbassare i tassi di interesse e di aumentare l'offerta di moneta . L'aumento dell' offerta di moneta avviene inondando le istituzioni finanziarie con capitale , nel tentativo di promuovere una crescita del credito e di liquidità .
BASE
This short essay examines some food for thought with regard to the possible political and institutional effects resulting from the quantitative easing, recently adopted by the European Central Bank. ; Questo saggio esamina le possibile politiche e gli effetti istituzionali del quantitative easing rcente adottato dalla BCE
BASE
Dottorato di ricerca in Ecologia Forestale ; Negli ultimi anni si sono sviluppate nuove linee di ricerca applicate al settore agro-forestale, finalizzate allo sviluppo delle migliori tecniche e alla selezione e al miglioramento genetico di materiale vegetale per la produzione delle biomasse ligno-cellulosiche. Questi studi sperimentali sono stati favoriti dalle necessità politiche generate dall'eccessivo consumo energetico dei Paesi industrializzati ed emergenti soggetti ad un intenso sviluppo economico ed al contemporaneo aumento dei costi delle fonti energetiche fossili. La scarsità di queste fonti, ed il loro implicito aumento di prezzo, sono la conseguenza della connaturata esauribilità di questi beni nel lungo periodo, della crescita significativa della domanda globale non supportata da un aumento di produzione nel breve e medio periodo, e delle continue tensioni politico-militari che si hanno in molti Stati produttori. Per la produzione delle biomasse in campo agro-forestale, le piantagioni forestali a turno breve(Short Rotation Forestry) potranno avere un ruolo significativo soltanto se le difficoltà, di natura tecnica ed economica, oggi riscontrabili in questo particolare settore dell'agricoltura, saranno affrontate e risolte. In Italia, le specie considerate utili per queste produzioni sono quelle a rapido accrescimento dei generi Eucaliptus L., Populus L. e Salix L. Nei terreni considerati marginali si ipotizza l'impiego di Robinia pseudoacacia L. Per quanto riguarda il genere Populus, gli obiettivi dell'attività di selezione e miglioramento genetico puntano ad ottenere un'elevata produzione, un rapido accrescimento e una maggiore tolleranza alle avversità biotiche ed abiotiche. Presso il Dipartimento di Scienze dell'Ambiente Forestale e delle sue Risorse (DiSAFRi) dell'Università della Tuscia, negli ultimi anni sono state realizzate collezioni di germoplasma di Populus, in particolare di Populus alba L. e Populus nigra L. Il materiale genetico raccolto è stato sviluppato all'interno dell'Azienda Agraria dell'Università della Tuscia, le cui progenie hanno costituito famiglie di fratellastri (half sib). I singoli genotipi sono stati identificati per mezzo di un codice, il quale rende possibile l'identificazione della famiglia e della popolazione di appartenenza. Oltre alla conservazione ex situ, queste famiglie half sib risultano essere un'ottima base di partenza per studi di genetica delle popolazioni e di genetica quantitativa. I caratteri quantitativi, alla base della produzione delle biomasse ligno-cellulosiche, possono essere compresi attraverso lo studio delle progenie di prima generazione generate da genotipi di pioppo appartenenti alla medesima specie o a specie differenti. Conseguentemente, è stato generato un pedigree che racchiudesse la più ampia variabilità genetica della specie, utilizzando dei parentali provenienti da ambienti e latitudini molto diverse. Il pedigree di pioppo bianco, denominato POP4 (142 genotipi), studiato in quest'attività di ricerca, è stato ottenuto dall'incrocio dei parentali "14P11" e "6K3", che fanno parte di popolamenti naturali ben distinti. Il "14P11" è il parentale femminile (♀), ed appartiene alla famiglia derivante dalla pianta madre 14P, originaria dell'Italia meridionale (Policoro, MT). Il "6K3" (♂), che appartiene alla famiglia 6K, è originario dell'Italia settentrionale (Carcare, SV). Nell'ambito del progetto di ricerca europeo, denominato POPYOMICS, tramite lo studio di questa progenie si tenta di valutare e comprendere l'importanza di alcuni caratteri quantitativi coinvolti nella produzione delle biomasse ligno-cellulosiche nella specie autoctona di P. alba. Quest'attività di ricerca si integra con studi di biologia molecolare necessari all'individuazione dei marcatori genetici coinvolti nell'espressione dei caratteri, utilizzando un'analisi QTL (Quantitative Trait Loci) finalizzata al miglioramento genetico e allo sviluppo della selezione assistita da marcatori molecolari (MAS). La sperimentazione è stata condotta in tre siti situati in Inghilterra, Francia ed Italia. Gli impianti sono stati realizzati e gestiti con gli stessi criteri tecnici. I caratteri valutati nella sperimentazione possono essere distinti in caratteri legati all'accrescimento e alla produzione, circonferenza, altezza, indice di volume, produzione di biomassa epigea, in caratteri legati alla morfologia della foglia, area fogliare e lunghezza del picciolo, ed in caratteri che descrivono la ramificazione delle piante, numero dei rami sillettici ed indice dei rami. Per raggiungere gli obiettivi preposti, la sperimentazione è stata condotta secondo un piano generale di lavoro ben definito. Tale piano è suddivisibile secondo queste fasi: 1. Collezione dei dati; 2. Correzione dei dati (individuazione degli outliers, trasformazione dei dati, aggiustamento spaziale dei dati); 3. Analisi dei dati intrasito (medie genotipiche aggiustate, ereditabilità individuale e genotipica, correlazione fra caratteri, eterosi); 4. Analisi dei dati intersito (componenti della varianza, correlazione fra siti per singoli caratteri). ; In the last years new lines of search have been developed applied to the sour-forest field, finalized to the development of the best techniques and to the selection and the genetic improvement of material vegetable for the production of the biomass. These studies experience them have been favourite from the political necessities generated from the excessive energetic consumption of the Countries industrialize to you and emerged subject to an intense economic development and the contemporary increase of the costs of the fossil energetic sources. The sparsity of these sources, and their implicit increase of price, are the consequence of the inborn sparsity of these assets in along period, of the meaningful increase of the not supported total question from a production increase in the long and medium term, and of the continuous political-military tensions that have in many States producers. For the production of the biomass in sour-forest field, the forest plantations to short turn (Short Rotation Forestry) will only be able to have a meaningful role if the difficulties, of technical and economic nature, today found in this particular field of agriculture, will be faced and resolved. In Italy, the species considered useful for these productions is those to express increase of the kinds Eucaliptus L., Populus L. and Salix L. In lands it considers marginal assumes the employment you of Robinia pseudoacacia L. As far as the Populus genus of trees, it objects it you of the selection activity and genetic improvement heads to obtain a high production, an express increase and one greater tolerance to the stress. Near the Department of Forest Resources and Environment (DiSAFRi) of the University of the Tuscia, in the last years have been realized collections of germplasm of Populus, in particular of Populus alba L. and Populus nigra L. The collected genetic material has been developed to the inside of the Agrarian Company of the University of the Tuscia, whose progeny have constituted families of stepbrothers (half sib). The single genotypes have been identifying to you for means of a code, which it renders the identification of the family and the population of belongings possible. Beyond to the former conservation ex-situ, these families half sib turn out to be an optimal line of departure for studies of genetics of the populations and quantitative genetics. The quantitative characters you, to the base of the production of the biomass, can be comprised through the study of the progeny first generation generated from genotypes of poplar pertaining to the same different species or species. Consequently, it has been generated pedigree that the widest genetic variability of the species enclosed, using of the coming from ancestral celebrations from atmospheres and various latitudes much. The pedigree of poplar white man, called POP4 (142 genotypes), studied in this activity of search, have been obtained from the crossing of the ancestral celebrations "14P11" and "6K3", that they make part of natural populations very distinguished. "14P11" it is the feminine parent (♀), and belongs to the family deriving from the plant mother 14P, original of southern Italy (Policoro, MT). "6K3" (♂), that it belongs to the family 6K, it is original of northern Italy (Carcare, SV). In the within of the European plan of search, called POPYOMICS, through the study of this progeny it is tried to estimate and to comprise the importance of some quantitative characters been involved you in the production of the biomass in the native species of P. alba. This activity of integral search with studies of necessary molecular Biology to the location of the genetic markers been involved in the expression of the characters, using an analysis QTL (Quantitative Trait Loci) finalized to the genetic improvement and the development of the selection assisted from molecular markers (MAS). The experimentation has been lead in three situated ones situates to you in England, France and Italy. The systems have been realize to you and managed with the same technical criteria. The characters estimated in the experimentation can be distinguished in characters legacies to the increase and the production, circumference, height, index of volume, production of biomass, in characters legacies to the morphology of the leaf, leaf area and length of the petiole, and in characters who describe the ramification of the plants, number of branches sylleptic and index of branches. In order to catch up he objects it to you places, the experimentation has been second lead a general plan of job very defined. Such slowly he is subdivided second this makes yourself: 1. Collection of the data; 2. Correction of the data (location of the outliers, transformation of the data, adjustment spaces them of the data); 3. Analyses of the data intra-site (medium fixed genotypic, hereditability characterize them and genotypic, correlation between characters, heterosis); 4. Analysis of the data inter-site (components of the variance, correlation between situated for single characters).
BASE
In: Italian Political Science Review: Rivista italiana di scienza politica, Band 40, Heft 3, S. 463-472
ISSN: 0048-8402
The word "asbestos", that means unquenchable, is used for a group of silicate minerals occurring with a fibrous habit, belonging to the serpentine and amphibole families. According to the Italian Legislation (D.L. 15/08/91) the six fibrous silicates defined as asbestos are: chrysotile, amosite and crocidolite (fibrous varieties of grunerite and riebeckite, respectively), anthophyllite, tremolite and actinolite. These minerals are made up of incombustible, chemically stable, inert, phono-absorbing, flexible and tensile fibers. The chemical and physical properties of asbestos made it, in past decades, one of the most important inorganic materials for industrial uses and technological applications. At the end of the 1950s the correlation between exposure to asbestos and development of pleural mesothelioma and bronchogenic carcinoma was established. Since the last decades, asbestos health hazard is considered not only an occupational problem, but also a potential environmental hazard. As a consequence, in most western countries, the current legislation imposed severe laws to regulate the use of potentially asbestos-bearing rocks and soils. The pathogenicity of the asbestos fibers has been considered to be due to one or more of the following factors: i) the fibrous habit (a mineral is defined as fibrous when its length/diameter ratio is greater than 3:1); ii) chemical-mineralogical factors (fiber type, chemical composition, surface reactivity); iii) the biopersistence. These factors are interconnected: in fact, the fiber dimensions influence its surface reactivity, fiber composition controls its biopersistence and biopersistence is associated to the fiber habit. Though the six asbestos minerals are considered as equally dangerous for the human health, recent epidemiological studies have demonstrated that crocidolite, amosite and tremolite are clearly more dangerous than chrysotile. In the Western Alps fibrous minerals mainly occur in the Piemonte Zone of Calcschists with meta-ophiolites. This work is part of a multidisciplinary project entitled "Asbestos hazard in Western Alps", goaled at studing occurrence, environmental hazard and possible inactivation of fibrous minerals in the Western Alps. This project, financially supported by the Assessorato all'Ambiente of Regione Piemonte, was coordinated by the Interdepartmental Centre "G. Scansetti" (Università di Torino). The open questions from which this work was born are: i) Which fibrous minerals occur in the serpentinites from the Susa and Lanzo Valleys? ii) Where these minerals occur? Which are the genetic conditions that influence their growth? iii) In which percentage the fibrous minerals are present in the serpentinite rocks? On the basis of these open questions, the Thesis has been organized in 6 chapter. •Chapter 1 – The six minerals defined as asbestos are presented; their potential patogenicity and the deseases correlated to the asbestos exposure are briefly discussed. •Chapter 2 – The geological setting of the Piemonte Zone of Calcschists with meta-ophiolites is briefly discussed, with special attention to the metamorphic evolution of the Ultramafic Lanzo Massif and of the Internal/External Piemonte Zone. •Chapter 3 – The topic of this chapter is the mineralogical and chemical characterization of the fibrous minerals occurring in the analysed serpentinites, i.e. serpentine minerals (chrysotile and antigorite), balangeroite, diopside, tremolite and carlosturanite. For each fibrous mineral, the crystallographic structure and optical properties are reported, and the chemical composition and vibrational properties (FTIR and Μ-Raman spectroscopy) are discussed in detail. From these data it is evident that a rapid and unambiguous identification of fibrous minerals requires the combined use of several analytical techniques, particularly the optical and electron microscopy and the micro-Raman spectroscopy. •Chapter 4 – This chapter is dedicated to the petrological study of the serpentinites from the Susa and Lanzo Valleys, which has been carried out mainly by means of optical and electron microscopy, and Μ-Raman spectroscopy. In the first part of the chapter, the serpentinization processes are briefly discussed and the serpentinite microstructures and the metamorphic paragenesis are described in detail. The second part of the chapter is dealing with the metamorphic veins occurring in the serpentinites. The mechanisms by which a fibrous vein may form are firstly considered; the five generations of metamorphic veins recognised in the serpentinites are, then, described in detail and some hypotheses for their genetic conditions are suggested. The metamorphic P-T path estimated for the serpentinites on the ground of microstructural observations and thermobarometric data, is discussed in the light of Μ(Ca2+/Mg2+)-Μ(SiO2) and P-T diagrams, calculated with the pseudosection approach. •Chapter 5 - This chapter concerns the problem of the quantitative determination of the fibrous minerals in the rocks. In the first part, the traditional techniques used for the quantitative estimate of asbestos in solid materials are presented, i.e. fiber count at SEM or TEM, X-ray powder diffraction and IR spectroscopy. In the second part of the chapter two new methods are proposed. The first one is based on the use of FTIR spectroscopy for the quantitative asbestos estimate in a chrysotile + antigorite mixtures. The second is based on the image analysis of SEM images combined with micro-Raman spectroscopy. This last technique gives both quantitative and morphological informations. •Chapter 6 – In the final chapter, the main results obtained, the still open questions, and the future perspectives are summarized and briefly discussed. ; Le mot "asbeste" (incombustible) est utilisé pour indiquer un groupe de silicate à habitus fibreux, appartenant aux familles des serpentines et des amphiboles. Selon la législation italienne (D.L. 15/08/91), les six silicates fibreux définis comme asbeste sont: le chrysotile, l'amosite et la crocidolite (variétés fibreuses de la grunérite et de la riébeckite), l'anthophyllite, la trémolite et l'actinolite. Ces minéraux sont constitués de fibres incombustibles, chimiquement stables, inertes et flexibles. A cause de leurs propriétés chimiques et physiques, les asbestes ont été considérés comme les plus importants matériaux inorganiques en vue d'applications industrielles et technologiques. À la fin des années 50, on découvrit la corrélation entre l'exposition à l'asbeste et le développement du mésotéliome pleural et du carcinome. Depuis quelques décennies, le risque asbeste n'est pas considéré comme seulement confiné au cadre professionnel, mais également en tant que risque potentiel pour l'environnement. Par conséquent, l'actuelle législation impose des lois sévères pour la réglementation de l'utilisation des roches et des sols potentiellement porteurs d'asbestes. Le caractère pathogène des fibres d'asbeste est associé aux facteurs suivants : i) faciès fibreux (un minéral est défini comme fibreux si le rapport longueur/diamètre est plus grand de 3 :1) ; ii) facteurs chimiques et minéralogiques (types de fibre, composition chimique, réactivité de surface) ; iii) la bio persistance. Ces facteurs sont interconnectés car les dimensions de la fibre influencent sa réactivité superficielle, la composition de la fibre contrôle sa bio persistance et la bio persistance est aussi associée au faciès de la fibre. Dans les Alpes Occidentales, les minéraux fibreux sont concentrés dans la Zone Piémontaise des Schistes Lustrès à méta-ophiolites. Cette étude fait partie d'une projet multidisciplinaire intitulé « Le risque asbeste dans les Alpes Occidentales », visé à l'étude de la présence, du risque et de la possible inactivation des minéraux fibreux dans les Alpes Occidentales. Ce projet, financé par l'Assessorato all'Ambiente de la Regione Piemonte, a été coordonné par le Centro Interdipartimentale « G. Scansetti » de l'Université de Torino. Cette étude se fonde sur les questions suivantes : i) Quels sont les minéraux fibreux dans les vallées de Susa et de Lanzo ? ii) Où ces minéraux sont-ils concentrés ? Quelles conditions génétiques contrôlent leur croissance ? iii) Quel est le pourcentage les minéraux fibreux dans les serpentines? Sur la base de ces questions, cette thèse a été organisée en six chapitres : •Chapitre 1 – Les six minéraux fibreux définis comme asbeste sont présentés et leur potentiel pathogène est discuté. •Chapitre 2 – La Zone Piémontaise des Schistes Lustrés à méta-ophiolites est décrite brièvement. •Chapitre 3 – Ce chapitre traite de la caractérisation minéralogique et chimique des minéraux fibreux reconnus dans les serpentinites étudiées, c'est-à-dire des minéraux du groupe des serpentines (chrysotile et lizardite), la balangéroïte, le diopside, la trémolite et la carlosturanite. Pour chacun de ces minéraux sont présentées la structure cristallographique, les propriétés optiques, la composition chimique et les propriétés vibrationnelles (Μ-Raman et FTIR). •Chapitre 4 – Ce chapitre traite de l'étude pétrologique des serpentinites des vallées de Susa et de Lanzo, réalisée par microscopie optique et électronique, et spectroscopie Μ-Raman. Dans la première partie, les mécanismes de la serpentinisation sont présentés et les microstructures des serpentinites sont décrits en détail. Dans la deuxième partie, les cinq générations de veines métamorphiques reconnues dans les serpentines sont décrites en détail et des modes de formation sont proposés. La trajectoire P-T estimée pour les serpentinites, sur la base des observations microstructurales et des données thermobarométriques, est discutée à la lumière des diagrammes Μ(Ca2+/Mg2+)-Μ(SiO2) et P-T, calculés grâce à la technique des pseudosections. •Chapitre 5 – Ce chapitre traite du problème de la détermination quantitative des minéraux fibreux dans les roches. Dans la première partie, les techniques traditionnelles pour la détermination quantitative de l'asbeste dans le matériel solide sont présentées. Dans la deuxième partie, deux nouvelles techniques sont décrites en détail. La première est basée sur la spectroscopie FTIR appliquée à une mélange de antigorite + chrysotile. La deuxième sur l'analyse des images SEM (BSE) associée à la spectroscopie micro-Raman. •Chapitre 6 – Il s'agit du chapitre de conclusion, où sont brièvement discutés les résultats, les questions encore ouvertes et les perspectives futures de ce travail.
BASE
The word "asbestos", that means unquenchable, is used for a group of silicate minerals occurring with a fibrous habit, belonging to the serpentine and amphibole families. According to the Italian Legislation (D.L. 15/08/91) the six fibrous silicates defined as asbestos are: chrysotile, amosite and crocidolite (fibrous varieties of grunerite and riebeckite, respectively), anthophyllite, tremolite and actinolite. These minerals are made up of incombustible, chemically stable, inert, phono-absorbing, flexible and tensile fibers. The chemical and physical properties of asbestos made it, in past decades, one of the most important inorganic materials for industrial uses and technological applications. At the end of the 1950s the correlation between exposure to asbestos and development of pleural mesothelioma and bronchogenic carcinoma was established. Since the last decades, asbestos health hazard is considered not only an occupational problem, but also a potential environmental hazard. As a consequence, in most western countries, the current legislation imposed severe laws to regulate the use of potentially asbestos-bearing rocks and soils. The pathogenicity of the asbestos fibers has been considered to be due to one or more of the following factors: i) the fibrous habit (a mineral is defined as fibrous when its length/diameter ratio is greater than 3:1); ii) chemical-mineralogical factors (fiber type, chemical composition, surface reactivity); iii) the biopersistence. These factors are interconnected: in fact, the fiber dimensions influence its surface reactivity, fiber composition controls its biopersistence and biopersistence is associated to the fiber habit. Though the six asbestos minerals are considered as equally dangerous for the human health, recent epidemiological studies have demonstrated that crocidolite, amosite and tremolite are clearly more dangerous than chrysotile. In the Western Alps fibrous minerals mainly occur in the Piemonte Zone of Calcschists with meta-ophiolites. This work is part of a multidisciplinary project entitled "Asbestos hazard in Western Alps", goaled at studing occurrence, environmental hazard and possible inactivation of fibrous minerals in the Western Alps. This project, financially supported by the Assessorato all'Ambiente of Regione Piemonte, was coordinated by the Interdepartmental Centre "G. Scansetti" (Università di Torino). The open questions from which this work was born are: i) Which fibrous minerals occur in the serpentinites from the Susa and Lanzo Valleys? ii) Where these minerals occur? Which are the genetic conditions that influence their growth? iii) In which percentage the fibrous minerals are present in the serpentinite rocks? On the basis of these open questions, the Thesis has been organized in 6 chapter. •Chapter 1 – The six minerals defined as asbestos are presented; their potential patogenicity and the deseases correlated to the asbestos exposure are briefly discussed. •Chapter 2 – The geological setting of the Piemonte Zone of Calcschists with meta-ophiolites is briefly discussed, with special attention to the metamorphic evolution of the Ultramafic Lanzo Massif and of the Internal/External Piemonte Zone. •Chapter 3 – The topic of this chapter is the mineralogical and chemical characterization of the fibrous minerals occurring in the analysed serpentinites, i.e. serpentine minerals (chrysotile and antigorite), balangeroite, diopside, tremolite and carlosturanite. For each fibrous mineral, the crystallographic structure and optical properties are reported, and the chemical composition and vibrational properties (FTIR and Μ-Raman spectroscopy) are discussed in detail. From these data it is evident that a rapid and unambiguous identification of fibrous minerals requires the combined use of several analytical techniques, particularly the optical and electron microscopy and the micro-Raman spectroscopy. •Chapter 4 – This chapter is dedicated to the petrological study of the serpentinites from the Susa and Lanzo Valleys, which has been carried out mainly by means of optical and electron microscopy, and Μ-Raman spectroscopy. In the first part of the chapter, the serpentinization processes are briefly discussed and the serpentinite microstructures and the metamorphic paragenesis are described in detail. The second part of the chapter is dealing with the metamorphic veins occurring in the serpentinites. The mechanisms by which a fibrous vein may form are firstly considered; the five generations of metamorphic veins recognised in the serpentinites are, then, described in detail and some hypotheses for their genetic conditions are suggested. The metamorphic P-T path estimated for the serpentinites on the ground of microstructural observations and thermobarometric data, is discussed in the light of Μ(Ca2+/Mg2+)-Μ(SiO2) and P-T diagrams, calculated with the pseudosection approach. •Chapter 5 - This chapter concerns the problem of the quantitative determination of the fibrous minerals in the rocks. In the first part, the traditional techniques used for the quantitative estimate of asbestos in solid materials are presented, i.e. fiber count at SEM or TEM, X-ray powder diffraction and IR spectroscopy. In the second part of the chapter two new methods are proposed. The first one is based on the use of FTIR spectroscopy for the quantitative asbestos estimate in a chrysotile + antigorite mixtures. The second is based on the image analysis of SEM images combined with micro-Raman spectroscopy. This last technique gives both quantitative and morphological informations. •Chapter 6 – In the final chapter, the main results obtained, the still open questions, and the future perspectives are summarized and briefly discussed. ; Le mot "asbeste" (incombustible) est utilisé pour indiquer un groupe de silicate à habitus fibreux, appartenant aux familles des serpentines et des amphiboles. Selon la législation italienne (D.L. 15/08/91), les six silicates fibreux définis comme asbeste sont: le chrysotile, l'amosite et la crocidolite (variétés fibreuses de la grunérite et de la riébeckite), l'anthophyllite, la trémolite et l'actinolite. Ces minéraux sont constitués de fibres incombustibles, chimiquement stables, inertes et flexibles. A cause de leurs propriétés chimiques et physiques, les asbestes ont été considérés comme les plus importants matériaux inorganiques en vue d'applications industrielles et technologiques. À la fin des années 50, on découvrit la corrélation entre l'exposition à l'asbeste et le développement du mésotéliome pleural et du carcinome. Depuis quelques décennies, le risque asbeste n'est pas considéré comme seulement confiné au cadre professionnel, mais également en tant que risque potentiel pour l'environnement. Par conséquent, l'actuelle législation impose des lois sévères pour la réglementation de l'utilisation des roches et des sols potentiellement porteurs d'asbestes. Le caractère pathogène des fibres d'asbeste est associé aux facteurs suivants : i) faciès fibreux (un minéral est défini comme fibreux si le rapport longueur/diamètre est plus grand de 3 :1) ; ii) facteurs chimiques et minéralogiques (types de fibre, composition chimique, réactivité de surface) ; iii) la bio persistance. Ces facteurs sont interconnectés car les dimensions de la fibre influencent sa réactivité superficielle, la composition de la fibre contrôle sa bio persistance et la bio persistance est aussi associée au faciès de la fibre. Dans les Alpes Occidentales, les minéraux fibreux sont concentrés dans la Zone Piémontaise des Schistes Lustrès à méta-ophiolites. Cette étude fait partie d'une projet multidisciplinaire intitulé « Le risque asbeste dans les Alpes Occidentales », visé à l'étude de la présence, du risque et de la possible inactivation des minéraux fibreux dans les Alpes Occidentales. Ce projet, financé par l'Assessorato all'Ambiente de la Regione Piemonte, a été coordonné par le Centro Interdipartimentale « G. Scansetti » de l'Université de Torino. Cette étude se fonde sur les questions suivantes : i) Quels sont les minéraux fibreux dans les vallées de Susa et de Lanzo ? ii) Où ces minéraux sont-ils concentrés ? Quelles conditions génétiques contrôlent leur croissance ? iii) Quel est le pourcentage les minéraux fibreux dans les serpentines? Sur la base de ces questions, cette thèse a été organisée en six chapitres : •Chapitre 1 – Les six minéraux fibreux définis comme asbeste sont présentés et leur potentiel pathogène est discuté. •Chapitre 2 – La Zone Piémontaise des Schistes Lustrés à méta-ophiolites est décrite brièvement. •Chapitre 3 – Ce chapitre traite de la caractérisation minéralogique et chimique des minéraux fibreux reconnus dans les serpentinites étudiées, c'est-à-dire des minéraux du groupe des serpentines (chrysotile et lizardite), la balangéroïte, le diopside, la trémolite et la carlosturanite. Pour chacun de ces minéraux sont présentées la structure cristallographique, les propriétés optiques, la composition chimique et les propriétés vibrationnelles (Μ-Raman et FTIR). •Chapitre 4 – Ce chapitre traite de l'étude pétrologique des serpentinites des vallées de Susa et de Lanzo, réalisée par microscopie optique et électronique, et spectroscopie Μ-Raman. Dans la première partie, les mécanismes de la serpentinisation sont présentés et les microstructures des serpentinites sont décrits en détail. Dans la deuxième partie, les cinq générations de veines métamorphiques reconnues dans les serpentines sont décrites en détail et des modes de formation sont proposés. La trajectoire P-T estimée pour les serpentinites, sur la base des observations microstructurales et des données thermobarométriques, est discutée à la lumière des diagrammes Μ(Ca2+/Mg2+)-Μ(SiO2) et P-T, calculés grâce à la technique des pseudosections. •Chapitre 5 – Ce chapitre traite du problème de la détermination quantitative des minéraux fibreux dans les roches. Dans la première partie, les techniques traditionnelles pour la détermination quantitative de l'asbeste dans le matériel solide sont présentées. Dans la deuxième partie, deux nouvelles techniques sont décrites en détail. La première est basée sur la spectroscopie FTIR appliquée à une mélange de antigorite + chrysotile. La deuxième sur l'analyse des images SEM (BSE) associée à la spectroscopie micro-Raman. •Chapitre 6 – Il s'agit du chapitre de conclusion, où sont brièvement discutés les résultats, les questions encore ouvertes et les perspectives futures de ce travail.
BASE